Recently I updated my moto e to lollipop 5.1 but after 3 days I left the phone to charge overnight and in morning there was no network, so I tried restarting but it didnt worked . then i did a factory reset and after that I lost my wifi also. When I checked the Baseband version it is showing unknown and same is the case with IMEI numbers. IMEI are null. I tried factory resets multiple time but it didnt solved the problem. So i installed custom rom thinking that it will solve the problem but it didnt. I tried CM 12 and also PA. Please help me with this.:crying:
same issue.. pls help
hi firoz i am facing exactly same problem. everything stopped working in my phone. can you pls help me if you got this issue resolved.
I did factory reset stil no success.
solution
i know i am replying late, but i found a fix for this. You have to reflash the stock rom that is Android 4.4.2 on this and the modem will start working. Or else you can just extract the NON-HLOS which is in the Stock rom package. And flash that through mfastboot command. Or best restore the stock rom.
Just download Stock Rom, Mfastboot & Installrom.bat file.
Extract everything in a single place.
Install Android Studio in your system for adb command.
Go in the folder and hold shift + rightclick choose open command window here.
Type adb reboot bootloader to reboot the device.
Then drag install.bat file in the cmd and done. It will take time but the baseband will reappear.
thanx [email protected] baseband restored
Baseband Unknown
[email protected] said:
i know i am replying late, but i found a fix for this. You have to reflash the stock rom that is Android 4.4.2 on this and the modem will start working. Or else you can just extract the NON-HLOS which is in the Stock rom package. And flash that through mfastboot command. Or best restore the stock rom.
Just download Stock Rom, Mfastboot & Installrom.bat file.
Extract everything in a single place.
Install Android Studio in your system for adb command.
Go in the folder and hold shift + rightclick choose open command window here.
Type adb reboot bootloader to reboot the device.
Then drag install.bat file in the cmd and done. It will take time but the baseband will reappear.
Click to expand...
Click to collapse
Hi, Can it solve my problem? i have kitkat 4.4.4 in my moto e xt1022,,... and phone is rooted
rickyb16 said:
Hi, Can it solve my problem? i have kitkat 4.4.4 in my moto e xt1022,,... and phone is rooted
Click to expand...
Click to collapse
yes ofcourse. Just grab the correct version from here : http://forum.xda-developers.com/showthread.php?t=2755857
Related
I wanted to instal Lollipop so i use a tutorial to flash brazil stock firmware and then i flashed lollipop,the problem is my phone dont get any signal and if i try manual search its says Error trying to search for network... Please help i
Same happened to me. I flashed only modem of 4.4.4 rom via fastboot and rebooted. After that wlan and mobile signal were working great on lollipop. Try at your own risk.
kraftmaschine said:
Same happened to me. I flashed only modem of 4.4.4 rom via fastboot and rebooted. After that wlan and mobile signal were working great on lollipop. Try at your own risk.
Click to expand...
Click to collapse
which file is the modem? whats the name of the file?
Here's a guide. http://forum.xda-developers.com/showthread.php?p=58852948
I just did the lines 6,7,8 in this guide where it says "fastboot flash N-Hlos..."
After that I rebooted and it all worked fine.
I just put all the files from the extracted 4.4.4 stock rom into the fastboot folder on my computer and and flashed the modem using only these three lines 6-8.
Hi guys,
Few days back I tried to go back to stock ROM , the process was fully completed , but when I booted my handset, I suffered from bootloop , I applied command "fastboot erase all" (in minimal adb and fastboot) , I came back to bootloader and downloaded another stock ROM did all the processing and my phone booted up properly........(now the main topic comes) :crying:I inserted my sims and saw there was no signal (my phone did told me the name of carrier I was on) but no signal..when I checked my imei number it was 0.....plzzzz help guys,.
My devices' information:-
Name- moto e 2015 4g
Imei-0
Country-India
Note-if u need any other information about my devices plzz comment, I will be online while day.:good:
I was faced same problem in my Moto xt1506,
try the following
1st install xposed module imei changer and apply new Imei and reboot ...,
I think above method don't work so let's try once..,
2nd
Download 3 Stock images i.e Stock-5.0/5.1/6.0(if available)
and then only take Modem files from Each ROM
Try to flash 5.0 modem
if no success
Try to flash 5.1 modem
and again 6.0
try above method u will get success..
And flash using these commands
mfastboot flash modem NON-HLOS.bin mfastboot erase modemst1 mfastboot erase modemst2 mfastboot flash fsg fsg.mbn
I hope ur problem will be solve
If you take the band off your phone you should see a little tab sticking out below the volume button. Pull on it and when it slides out you will see your imei number printed on there.
See this thread for info on how to enable baseband programming, steps 1 - 5 should be what you need to try to fix this http://forum.xda-developers.com/moto-e-2015/general/guide-enable-lte-bands-surnia-t3351673
Step 5 links to this thread (http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059), and step 4 in that thread links to QPST. I don't know if that will work, but it's probably worth checking out.
ok guys i will try both methods the one which spiked_mistborn told and the one which chisty_143 told..........thnx guys fr ur help..... i will try my best
Master ST said:
ok guys i will try both method
Click to expand...
Click to collapse
Has it worked?
rybshik said:
Has it worked?
Click to expand...
Click to collapse
not tried yet but i am downloading new stock rom which supports my country links here https://firmware.center/firmware/Motorola/Moto E (2nd gen-2015)/Stock/XT1521/
I am newbie to flashing. I thought to install xperia x firmware to my z2 running MM. I somehow unlocked the bootloader using flashtool. Then i couldn't proceed further on how to root., So I downloaded pre- rooted lollipop 5.1.1 from one of xda post and installed it using flashtool.
I just chose the ftf file in flashtool and clicked flash. During installation it asked "Do you want to keep default.fsc" i clicked yes. Now the phone is restarting continously.
The error is get is
"unfortunately com.android.process has stopped working"
and so on and the phone is restarting and showing the same errors.
PL help me..
Even via adb shell i flashed twrp.img and when i click fastboot boot twrp.img an error dtf not found is shown
Do you have working recovery?
Which firmware you tried to install?
MJ999 said:
Do you have working recovery?
Which firmware you tried to install?
Click to expand...
Click to collapse
I used flashtool 0.9.22.3 which had no wipe cache and data options
.
I used 23.4.A.232 a pre rooted one. But now, i again used flashtool older version 0.9.18.6 which have wipe cache and data by default. Now lollipop is working fine.
Im trying to install exsistenz MM os that have xperia x transparency lockscreen.
[email protected] said:
I used flashtool 0.9.22.3 which had no wipe cache and data options
.
I used 23.4.A.232 a pre rooted one. But now, i again used flashtool older version 0.9.18.6 which have wipe cache and data by default. Now lollipop is working fine.
Im trying to install exsistenz MM os that have xperia x transparency lockscreen.
Click to expand...
Click to collapse
I would like to know
1)the recover keys for z2. All those power+ repeated press of volume up/down aint working.
2) In adb shell , typing "fastboot flash recovery twrp.img" is finished successfully. but "fastboot boot twrp.img" shows error. "remote dtf not found"
I have searched all kinds of posts for the above problems the whole day and there is not a concrete solution to the above problem.
Pl quote your effective solutions..
So i got my Honor 5x yesterday and thought i would install a custom rom on it since people are recommending it.
Its my first time so i followed guids. I installed adb and fastboot and managed to get TWRP 3.1.1-0- on it.
Btw, i have a Honor 5x
Model KIW-L21
I am able to get into the recovery TWRP. I made a backup and saved the folder "BACKUPS" on my PC.
I then downloaded LineageOS from their Homepage: download (DOT) lineageos (DOT) org/kiwi
I downloaded the latest version. I also downloaded Gapps from Opengapps.org. I downloaded ARM64 version 7.1
I wiped my phone completely and copied the two zip files on the phone. I went to "install", selected LineageOS zip and added Gapps. i swiped right to install and the installation stopped with ERROR 7
I tried to download older versions of LineageOS but the same thing happens. ERROR 7
I then downloaded an olderversion of CM13 with GAPPS 6.0. Again, Error 7
I downloaded XENON HD ZIP from here: mirrors (DOT) c0urier (DOT) net/android/teamhorizon/N/Official/kiwi/
Error 7
I downloaded ASOP from here: downloads (DOT) aospextended (DOT) com/kiwi/
Error 7
I looked up Error 7 and its says it is a security check that figures out, that the ROM is not compatible with the Phone. Some guy told me that this happens a lot and that i should use another rom.
I looked for a solution on youtube and found a guy who said that i can do the following:
Unzip the ROM on your pc, go into \META-INF\com\google\android and open the updater script with Notepad++. Delete the first two lines that says asserts, save, close it again and zip the whole package again.
I copied the new, modifiled rom on the phone with the GAPPS and installed it. This time ERROR 7 didnt appear. GAPPS were also installed. When i boot my device i get in the loading screen from Lineage for about 5-10 minutes. After that, it just restarts and restarts and restarts. I can't get out of the boot loop since I can't remove my battery. when I press VOL UP I come back the TWRP and can wipe the phone again.
I tried that with 3 different LineageOS ROMS and one XENON HD ROM.
I also get into a boot loop where my phone just restarts and restarts and restarts.
I tried to get my backup working so I copied the folder "BACKUPS" on my phone and went to restore in TWRP. but... i found nothing there?
I am super frustrated since my phone is basically dead and I have no idea what I can do.
BTW, every site calls my phone "KIWI" but my model number is "KIW-L21"
As mentioned in Los 14.1 thread (& should be mentioned in all threads), "ROM Firmware Required: No VoLTE firmware! (B360, B370, ...)". You must downgrade your stock rom to B350 at least, before try playing with custom roms (only for kiwi, of course).
Non VoLTE Marshmallow firmware is required. As said by @mauam get in there and have the same process repeated
Thank you for your replies.
The only thing i could find was this thread: https://forum.xda-developers.com/ho...-lineageos-14-1-pre-official-kiw-l24-t3528488
It said there:
Important note:
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
It doesnt mentioned what that mean and even said "dont ask in here how to downgrade"
I have no idea what all that means. I dont know what stock firmware is, what version i have or how i could downgrade it. I can access TWRP, but still have no OS on it.
edit: this is the full log:
Updateing partition details...
... done
Full SElinux support is present.
MTP Enabled
Installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3.0.C3-00022") =="1"
assert failed: kiwi.verify_trustzone("TZ.BF.3.0.C3-00025") == "1"
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Updating parition details...
...done
Click to expand...
Click to collapse
When i edit the zip file and delete the first two line of the updater scripter with notepad++ as i mentioned above, i can install these ROMS, but they wont boot / are in an infinite Bootloop
So on which firmware you were before flashing Los
PalakMi said:
So on which firmware you were before flashing Los
Click to expand...
Click to collapse
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Activehannes said:
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Click to expand...
Click to collapse
Just go to about phone
PalakMi said:
Just go to about phone
Click to expand...
Click to collapse
I did and posted a screenshot above
is it Build number "KIW-L21C432B160"
so... B160?
update:
I just downloaded this:
NEW KIW-L21 C432B350 - D003
from this thread: https://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
I was going to unzip it, copy the "dload" folder on my device, go the the updater and run the "local update package".
And then my phone will be on android 6.0 with b350, right?
The next step would be to start the phone in the recovery TWRP, go to wipe --> advance wipe and select everything (system, data, cache etc). after that i copy the latest Kiwi lineage OS zip rom on my device with the GAPPS 7.1 and try to install them again via TWRP 3.1.1?
Is this right?
I just wanna ask because my phone doesnt work for 2 days now and i dont want to brick it completely. cant afford a new one
Update to marshmallow first (any update before b360, like b320)
Update to marshmallow first (any update before b360, like b320)
Click to expand...
Click to collapse
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Try manual ota here or search here. If no luck use XDA search bar &/or Google. Good luck.
Activehannes said:
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Click to expand...
Click to collapse
Try any marshmallow update before b360.
If it didn't work, try the above post.
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
PS C:\adb> adb devices
List of devices attached
W6HDU17610003396 device
PS C:\adb> adb reboot bootloader
PS C:\adb> fastboot oem relock 1524319619165116
...
FAILED (remote: Image verify failed,relock fail)
finished. total time: 1.810s
PS C:\adb> adb devices
List of devices attached
PS C:\adb>
Click to expand...
Click to collapse
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Activehannes said:
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Click to expand...
Click to collapse
May be i can help u with this .
Since i flash twrp and install magisk i dont have sound on my mi a3. Mic not working, audio not working,music is not playing. When i try to open a video it gives an error " Something went wrong". I tried erase boot flash twrp again, factory reset my mi a3 etc. still problem exist. I downloaded 10.3.8 stock boot.img and flashed system give error in red characters and telling me Factory reset my phone. I live in mountain as a soldier now. This is the only phone that i have in this mountain. Please help
As the first attempt for a fix I'd try switching active slots. If that won't help, you'll probably need to download whole stock ROM and reflash it (for this you must change active slot to A). You can try keeping data (flash all except storage.bat), if it won't work then you'll need to reflash again with data wipe (flash all.bat).
Switching slot doesnt help. i downloaded 10.3.4 rom which has .tgz extension. miFlashtool doesnt recognize my phone and gives error about installing drivers. How to flash new rom? Can you help me little :/
sasukeob said:
Switching slot doesnt help. i downloaded 10.3.4 rom which has .tgz extension. miFlashtool doesnt recognize my phone and gives error about installing drivers. How to flash new rom? Can you help me little :/
Click to expand...
Click to collapse
Unpack the tgz file (inside is another zip if I remember correctly - unzip it as well). Then locate file "flash_all_except_storage.bat" and run it with phone connected in fastboot mode. It should start flashing all images. Do not forget to set slot A as active before booting up the phone.
_mysiak_ said:
Unpack the tgz file (inside is another zip if I remember correctly - unzip it as well). Then locate file "flash_all_except_storage.bat" and run it with phone connected in fastboot mode. It should start flashing all images. Do not forget to set slot A as active before booting up the phone.
Click to expand...
Click to collapse
when i click flash all except storage in fastboot mode. it will do everything i should do right?
sasukeob said:
when i click flash all except storage in fastboot mode. it will do everything i should do right?
Click to expand...
Click to collapse
Yes, it will reflash all partitions with correct stock images.
Guys any other solitions to tell? i cant understand how a phone doesnt play sound even i factory reset it? my hardware is working problem is software but i dont know which part of software...
You might have incorrect combination of kernel and vendor/system/dsp/.. partitions. If one of them is from different version, phone might not boot at all, or cause wifi/sound/.. issues. Have you gone through full rom flashing successfully?
i will do that but first let me find drivers for miflashtool
Generic Google ADB/fastboot drivers will work fine.
_mysiak_ said:
Generic Google ADB/fastboot drivers will work fine.
Click to expand...
Click to collapse
it didnt but i will find qualcomm drivers and install
Qualcom drivers are for EDL mode as far as I know.
i flashed stock rom and my problem solved admins can close this thread. @_mysiak_ thank you for all your help bro
Mine also same, wifi not working, mic not working, no call outgoing/receiving, no media playing, mp3 file is not supported by any player how you fixed?
sasukeob said:
Since i flash twrp and install magisk i dont have sound on my mi a3. Mic not working, audio not working,music is not playing. When i try to open a video it gives an error " Something went wrong". I tried erase boot flash twrp again, factory reset my mi a3 etc. still problem exist. I downloaded 10.3.8 stock boot.img and flashed system give error in red characters and telling me Factory reset my phone. I live in mountain as a soldier now. This is the only phone that i have in this mountain. Please help
Click to expand...
Click to collapse
Mine also have same problem after flashing twrp.
But you can solve it by flashing stock rom in fastboot mode.(Using .bat files included in tgz package after extracting)
But while flashing, If you face any error like remote failed crc error.
Just press the power key of device till it reboots again, and process continues in cmd. Wait for it. Enjoy