Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do
:crying: :crying:
I think I wiped the android completely if the USB will work I will fix it even if it costs 100$ in my country
And when I put the magnet it doesn't charge I installed with 25% is that what f**ked me up ?
At first this is the wrong section to discuss this. To your problem. Press the red reset button with a pen or something. Its next to the sim card slot. After that you should can go in to recovery mode.
nexuspur said:
At first this is the wrong section to discuss this. To your problem. Press the red reset button with a pen or something. Its next to the sim card slot. After that you should can go in to recovery mode.
Click to expand...
Click to collapse
Thank you so much for replaying didn't work
You can't go into fastboot mode? Press volume up und connect it to your pc.
Related
yesterday I was all in to these new x10 themes and stuff so I had to get everything installed, and as usual, I killed this poor little guy
I installed xRecovery and Busybox, and as soon as I installed the update.zip my phone got stuck at the SE logo after the first reboot, I'm clueless and desperate for help ( not really, but I don't like my old Samsung Monte so I would really appreciate some help with this x10 mini )
this might have happened because I haven't compared the ROM versions,
does anybody know how can I fix this crap? the phone is literally a brick now,
tried plugging both USB and the other cable, but nothing helps.
edit : I managed to get to the XRecovery screen, but still nothing, the phone is still getting stuck at SE logo.
BeastAce said:
yesterday I was all in to these new x10 themes and stuff so I had to get everything installed, and as usual, I killed this poor little guy
I installed xRecovery and Busybox, and as soon as I installed the update.zip my phone got stuck at the SE logo after the first reboot, I'm clueless and desperate for help ( not really, but I don't like my old Samsung Monte so I would really appreciate some help with this x10 mini )
this might have happened because I haven't compared the ROM versions,
does anybody know how can I fix this crap? the phone is literally a brick now,
tried plugging both USB and the other cable, but nothing helps.
edit : I managed to get to the XRecovery screen, but still nothing, the phone is still getting stuck at SE logo.
Click to expand...
Click to collapse
Since ur able to get into xrecovery.. reflash the ROM with the flashable zip of the one presently installed..!! It will work..
Gintonic.SE by slade..
No such thing as "brick"..
Use SEUS or/and search for the term "bootloop" right here.
Wipe data from recovery is probably the easy and fast way out.
faiyyaz said:
Since ur able to get into xrecovery.. reflash the ROM with the flashable zip of the one presently installed..!! It will work..
Gintonic.SE by slade..
Click to expand...
Click to collapse
I haven't mentioned before, I'm new to Android and I have no clue what flashing is.
rooterdam said:
No such thing as "brick"..
Use SEUS or/and search for the term "bootloop" right here.
Wipe data from recovery is probably the easy and fast way out.
Click to expand...
Click to collapse
Have you meant this one?
http ://i.imgur . com/ebsRm.jpg
^
remove spaces please.
if you did, I should now tell you I tried this a few times and it has no use, I also tried most of the other options such as " Factory wipe " and " Wipe Dalvik Cache "
phone is still stuck at the SE logo, boot-looping
I will be very grateful if someone could explain to me what is this flashing all about, looks like it helped over 80% of the people who had the same problem, and I also need to know where I could get SEUS since I only have PC Companion and when I tried to download one of the SEUS versions out there it just said the version needs to be updated,
need help ASAP, thank your for your quick responds.
SEUS download.
And then root again, and then install CWM again, and then "install custom ROM" in CWM.
There is the option of "flashtool" but I don´t understand how that should be easy in anyway.
Root with super one click, search for AAIS and install that via "Terminal emulator" from Market, and then install custom ROM via CWM..
If ANYTHING above is weird or not understandable send me a PM and I´ll happily help you out with whatever it could be.
One tip is to save everything on the SD to be able to install everything via the SD whilst on the move, except for the rooting part that is..
Looks like I just completely killed the phone, accidentally erased the XRecovery.
Is there any possible way to re-install XRecovery without using the device itself?
well I guess same issue:
- one day my phone didnt connect to PC.
- it was charging but dead on USB side
- I couldnt use seus, wotan, flasher, nothing because I couldnt use USB!
- I downloaded custom ROM via wi-fi and through xrecovery installed it
- now phone hangs at SOny Ericsson logo boot screen
I cant use USB ( yeah, cable is 100% fine, tested, PC is 100% fine, tested, all drivers, etc. ) because my cell refused to join USB and refused even in xrecovery as mass storage (flash disk) so I have expensive piece of junk on my table with shining SOny Ericsson logo on screen
Got stuck in SE logo couldnt turn phone on or off or get any where
this worked for me
http://forum.xda-developers.com/showthread.php?t=1132185
if you can get in xrecovery try a diffrent rom
then you can you put a rom on your sdcard via the pc and back in the phone and use xrecovery
Did you guys wipe after install?
Try holding powerbutton+menu+backbutton and then connect the USB cable.
Let go of all except backbutton.
The green LED should light up and it should connect to SEUS.
If none of that works I could fix them IRC but that would require alot of trust from you as you would need to ship the phone to aswell as paying shipping both ways..
All I can give as security is my adress so you can see that I am who I say I am.
Oh, and I would do it for free as it´s just fun for me fixing bricked ones..
the problem is my phone wont connect to PC with USB.. otherwise it would be easy to put it again on life. many threads about it but not a single one when phone refuses to recognize USB inserted.
yup I´m always following step by step instructions and I did wipe after install. Tried that button combo..green light just blinked for second and nothing happened.
EDIT:
I´ve managed (after two days fight) to run my device again!!! USB is not working. its definitely dead. only charging works from wall charger not from USB port whatever one. I could only hope my x recovery will boot. Combo buttons werent working so I tried everything and the last step worked.
power button + left + middle + right one - restart
after the vibration put usb in it and insert SD card while holding right button ( i dont know if it helped or not but SIM card was removed too)
let it work about 10secs
release right button and my phone booted into x recovery!!! f..k im glad i have my phone back, uuuuuuuuuuuf
OK.
Try and leave it plugged in the charger for atleast an hour.
Could be the battery.
rooterdam said:
Did you guys wipe after install
Yes allways i was installing v6 supercharger but got the wrong busybox so i got stuck but all good for me now gingerdx flying
Click to expand...
Click to collapse
hurlof said:
the problem is my phone wont connect to PC with USB.. otherwise it would be easy to put it again on life. many threads about it but not a single one when phone refuses to recognize USB inserted.
yup I´m always following step by step instructions and I did wipe after install. Tried that button combo..green light just blinked for second and nothing happened.
EDIT:
I´ve managed (after two days fight) to run my device again!!! USB is not working. its definitely dead. only charging works from wall charger not from USB port whatever one. I could only hope my x recovery will boot. Combo buttons werent working so I tried everything and the last step worked.
power button + left + middle + right one - restart
after the vibration put usb in it and insert SD card while holding right button ( i dont know if it helped or not but SIM card was removed too)
let it work about 10secs
release right button and my phone booted into x recovery!!! f..k im glad i have my phone back, uuuuuuuuuuuf
Click to expand...
Click to collapse
Massive..B-)
Sent from my X10mini using XDA App
Hello to all!
I had my Xperia P hard bricked during CMW installation and I am trying hard to fix it by myself, because I believe I lost the warranty because of it ...
So I ask: is there anyone who can help me with a possible JIG Xperia P?
or any other option to reinstall android on my phone, because he is really dead! no recognition usb, no hard boot, no battery charging, no flashing lights....
nothing seems to work!!! ...
can anyone help me please?
Thank you in advance!
Alex
Alex Rocha said:
Hello to all!
I had my Xperia P hard bricked during CMW installation and I am trying hard to fix it by myself, because I believe I lost the warranty because of it ...
So I ask: is there anyone who can help me with a possible JIG Xperia P?
or any other option to reinstall android on my phone, because he is really dead! no recognition usb, no hard boot, no battery charging, no flashing lights....
nothing seems to work!!! ...
can anyone help me please?
Thank you in advance!
Alex
Click to expand...
Click to collapse
Bit more detail how you bricked it installing CWM. What exactly you done and where you get it from.
Try to shut it down, press power + volume up untill you feel (1+) 3 vibrations.
See if you can connect it in flash mode (connect usb to pc while you hold volue down), the led should turn green.
Xperia P hard bricked
ChikeD said:
Bit more detail how you bricked it installing CWM. What exactly you done and where you get it from.
Try to shut it down, press power + volume up untill you feel (1+) 3 vibrations.
See if you can connect it in flash mode (connect usb to pc while you hold volue down), the led should turn green.
Click to expand...
Click to collapse
First I'd like to thank's for your help ChikeD!
Well.... I was trying to install the new CM 11 Nightly Build - a custom ROM build on Android 4.4.2 KitKat- on my Sony Xperia P device
I had rooted succesfully and was seaching for an app on google play store to provide access to "recovery mode" that works with my LT 22i to finish the installation of this new rom... i tryed lot of apps, but no one worked... and so I've found this app "Recover X" from LEDelete developer.
after install and run, this app show me one option to get access to recovery mode... i dont remember exactly, but i saw somethig like "CMW......" on screen. after download, I tryed to reboot my phone and then its completly dead!! i'd tryed any kind of possibility pressing buttons dowloading softwares and more but my computers didn't recongize it when connect USB cable...
vol+ / power dont work, vol- / usb dont work, no charging indicator, no lights blinks, nothing works! it looks like a motherboard without any operational system...
And I saw in some websites that exist one JIG for Samsung devices that alows recovery phones with problems like mine... so i wonder if is possible to find some JIG for Xperia P or any other possibility of reinstallation of android system
I hope i made myself clear because I'm still learning this language... that means I'm sorry for my bad english in advice...
If there is anything that you can't understand, please let me know
Thank's a lot!
Alex
If you had asked before I would have told you Recovery X won't work, didn't work the 2 times I have tried it, but didn't brick my phone eithr.
To incatal CM you didn't neet to root or install CWM since you need to flash it's kernel anyway.
Is your bootloader unlocked?
Was the phone fully charged when it happened, did it start boot and then died or just went black?
Have you tried to hold the power + volume up for 10-15 minutes?
To reinstall firmware you need flash mode (volume down while connecting to USB), have you flashed with flashtool or PC Companion before?
ChikeD said:
If you had asked before I would have told you Recovery X won't work, didn't work the 2 times I have tried it, but didn't brick my phone eithr.
To incatal CM you didn't neet to root or install CWM since you need to flash it's kernel anyway.
Is your bootloader unlocked?
Was the phone fully charged when it happened, did it start boot and then died or just went black?
Have you tried to hold the power + volume up for 10-15 minutes?
To reinstall firmware you need flash mode (volume down while connecting to USB), have you flashed with flashtool or PC Companion before?
Click to expand...
Click to collapse
Yes i had reinstalled twice by flash tool and pc companion, holding vol down while connecting to USB, because the device was with very low performance.
When i was trying to get rebooted on "recovery mode" before the black screen, my battery was on 85%....
Yesterday i tried to do "hard reboot" holding the power + volume up for 50 minutes and nothing....
Actually what i really need is find a way to get some response of the system of this phone (by connecting in some jig, or doing something with the software or even the hardware...), because if my computer recognize the phone, i do believe that i'll can handle with reinstallation... in other words, my challenge now it's only get out from the black screen for any other operational response
One of my ideas is unmount rear cover and try to disconnect the battery cord for 10 minutes and see if something changes... but i'm fully opened to new ideas
I really believe that i'll succeed on this case with yours precious help!!
Thank you again for your assistance!
Alex
Alex Rocha said:
One of my ideas is unmount rear cover and try to disconnect the battery cord for 10 minutes and see if something changes... but i'm fully opened to new ideas
I really believe that i'll succeed on this case with yours precious help!!
Thank you again for your assistance!
Alex
Click to expand...
Click to collapse
It might, worked for this guy http://forum.xda-developers.com/showthread.php?t=2628715&page=2
ChikeD said:
It might, worked for this guy http://forum.xda-developers.com/showthread.php?t=2628715&page=2
Click to expand...
Click to collapse
Well... unfortunately remove the power cord did not worked... no changes! i confess that i was betting on this procedure... but ok! Let's keep searching for a new option!
Best regards!
Alex
Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
someguyonearth said:
Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
Click to expand...
Click to collapse
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
ChikeD said:
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
Click to expand...
Click to collapse
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
someguyonearth said:
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
Click to expand...
Click to collapse
You did not answer my first question., therefore I am not going to answer yours
ChikeD said:
You did not answer my first question., therefore I am not going to answer yours
Click to expand...
Click to collapse
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
someguyonearth said:
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
Click to expand...
Click to collapse
1. Open flash tool (don't click anything)
2. Turn the phone off, power + volume up until you feel (1+) 3 vibreations.
3. Press the volume up key while connecting the USB cable, led should lit blue and connected in fastboot should be in the log.
4. Repeat 2, press volume down while connectiong the USB cable for flash mode, check flashtool log
If flash mode stays connected for about 45 seconds you can simply try to flash stock with flash tool.
If fastboot stays connected over 20 seconds you can flash custom stock based kernel and flash moonwalker again, or any other custom rom you have on the phone.
If none works, just leave it turned of, charging for one day then try again.
I've seen more than one report of people that recovered XP by disconnecting the battery, though it didn't work for others.
Hey folks,
I have some serios sh!t over here.... I have installed a new rom and accidentally deleted the launcher3.apk (because usually I use nova) but in that moment I didnt have nova launcher installed!!!! And the phone rebooted itself since that moment I just see the boot animation for example but nothing else.
It wouldnt be a problem at all if I could just enter recovery wipe and install it again, or restore a twrp nandroid backup BUUUUUUTT my home button doesnt work! And thats why I cant boot into recovery since I cant touch the 3 buttons. Last time I went through adb commands into recovery but now adb says liste of device and there is one BUT it is offline... So when I type a command it says Error: Device Offline!
Is there a way to fix it without putting money into it?? Or do i need another LCD so I can boot into recovery with a working home button?? That would be a real real bad thing
Thanks a lot for help
Sanj3k
Okay, someone told me a hint! You can enter the download mode also, when you are holding volume down and then connecting the device to a charger. It worked well flashed with Odin FW etc. so no problem at all LOL! Maybe this information will help someone other. Please close the thread.
Sanj3k said:
Okay, someone told me a hint! You can enter the download mode also, when you are holding volume down and then connecting the device to a charger. It worked well flashed with Odin FW etc. so no problem at all LOL! Maybe this information will help someone other. Please close the thread.
Click to expand...
Click to collapse
Thanks for Information
I have problem with getting back to stock fullmics 5.5 on h850. I have installed it reboot and now Im stuck in secure start-up lock pattern from previous rom I believe. Pattern wont work and also meanwhile "FC system UI has stopped" warning is showing all the time.
I can get into download mode but port is not recgonized in vista so ADB cant be used (WHQL usb drivers 4.4.2 are installed ok)
problem is also that I cant get into recovery mode or
factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect.
Im really getting out of ideas to solve this...tech brain of the world please gather for help
fonejay said:
I have problem with getting back to stock fullmics 5.5 on h850. I have installed it reboot and now Im stuck in secure start-up lock pattern from previous rom I believe. Pattern wont work and also meanwhile "FC system UI has stopped" warning is showing all the time.
I can get into download mode but port is not recgonized in vista so ADB cant be used (WHQL usb drivers 4.4.2 are installed ok)
problem is also that I cant get into recovery mode or
factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect.
Im really getting out of ideas to solve this...tech brain of the world please gather for help
Click to expand...
Click to collapse
Go into twrp format data type yes how I fixed it on mine
TheMadScientist said:
Go into twrp format data type yes how I fixed it on mine
Click to expand...
Click to collapse
Why dont you fully read what I wrote
"...problem is also that I cant get into recovery mode or factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect."
ps: please excuse my writing my first language is clearly not english :fingers-crossed:
edit: just right now I opened phone up for check if buttons are OK...well turns out I wrecked button pins on motherboard.f*ck...now I know why I cant get into powerup menus...more specific I wrecked power button down pin on MB while opening back case with plastic card fkmylajf. Can be closed. SORRX
edit2: luckly I solved problem with straighteing pins so now twrp works as it should. What a noobish mistake huh...Be careful w with opening case!!??!
fonejay said:
Why dont you fully read what I wrote
"...problem is also that I cant get into recovery mode or factory reset menu from startup, seems power button down procedure wont work like previously did...for some reason bootloader warning appears almost immediately after power on so power button off and on for a sec like I believe it should, has no effect."
ps: please excuse my writing my first language is clearly not english :fingers-crossed:
edit: just right now I opened phone up for check if buttons are OK...well turns out I wrecked button pins on motherboard.f*ck...now I know why I cant get into powerup menus...more specific I wrecked power button down pin on MB while opening back case with plastic card fkmylajf. Can be closed. SORRX
edit2: luckly I solved problem with straighteing pins so now twrp works as it should. What a noobish mistake huh...Be careful w with opening case!!!
Click to expand...
Click to collapse
Sorry bout that mate I speed read a lot of stuff and sometimes miss Key details:silly::silly:
I ran into the problem with the corrupt startup and couldn't get out of it.So thats what I saw...
I run across a lot of devices so i spend a lot of time reading many many pages hard to catch it all