{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI 6 v5.8.6 for beloved Canvas Knight A350 superfast and lag free
Features:
-Buttersmooth UI
-Modified Kernel for Full Charging Current of 1 Amp (First time in any custom rom for Our Knight A350 (acc to me)
-Modified Kernel for Superb Battery Backup (check screenshot)
-Based on Android v4.4.2
-Sensors Working
-GPS Working with satellite locking without internet connection also
-Hotspot Working
-SIM 1 Supports 2G/3G and SIM2 only 2G
-Wifi, Bluetooth Working
-Dolby Atmos Preinstalled
-Superb Camera Quality
- And lots more.....
Bugs/Issues:
-Not even a single bug. All bugs are fixed and tested it over around 10 days.
INSTALLATION:
REQUIREMENTS: You Should be on V2 Knight Stock Rom.Your Phone Must Be Rooted & CWM/PhilZ Recovery Must Be Installed.
1. Download ROM From Below.
2. Copy It To SDCard.
3. Now Boot Into Recovery Mode.
4. Now Go To Wipe/Factory Reset
5. Do A Factory Reset & Then Wipe /Data, /Cache, /Dalvik Cache & /System.
6. Now Go Back & Tap On Install Zip Option.
7. Choose Install Zip From Internal SD
8. Locate Your Downloaded ROM & Confirm To Flash This ROM.
9. Follow On Screen Directions
10. Reboot Your Device
11. First Boot Will Take 3-5 Minutes So Please Patient!
DON'T FORGET TO HIT THANKS BUTTON
Download Link:https://drive.google.com/file/d/0BzWuR9stOc87MW1lXzFNOURCSUk/view?usp=sharing
Contributors:
Sachin Phogat
Rom Firmware Required: V2 KK
Version Information:v1
Created On: 2015-08-19
Last Updated On: 2015-08-19
Awesome Work Bro,But cant See Any SS however....
Awesome ROM!
Installed, just got stuck the first menu when is prompt the cloud MI give me the crush report
Anyone pass this option or has any tips?
Thanks
elaborate your problem i will tell you the fix?
Awesome job man.... Real good
Sent from my Micromax A350 using XDA Free mobile app
Sure I'll try this!!!
sachinphogat said:
MIUI 6 v5.8.6 for beloved Canvas Knight A350 superfast and lag free
Features:
-Buttersmooth UI
-Modified Kernel for Full Charging Current of 1 Amp (First time in any custom rom for Our Knight A350 (acc to me)
-Modified Kernel for Superb Battery Backup (check screenshot)
-Based on Android v4.4.2
-Sensors Working
-GPS Working with satellite locking without internet connection also
-Hotspot Working
-SIM 1 Supports 2G/3G and SIM2 only 2G
-Wifi, Bluetooth Working
-Dolby Atmos Preinstalled
-Superb Camera Quality
- And lots more.....
Bugs/Issues:
-Not even a single bug. All bugs are fixed and tested it over around 10 days.
INSTALLATION:
REQUIREMENTS: You Should be on V2 Knight Stock Rom.Your Phone Must Be Rooted & CWM/PhilZ Recovery Must Be Installed.
1. Download ROM From Below.
2. Copy It To SDCard.
3. Now Boot Into Recovery Mode.
4. Now Go To Wipe/Factory Reset
5. Do A Factory Reset & Then Wipe /Data, /Cache, /Dalvik Cache & /System.
6. Now Go Back & Tap On Install Zip Option.
7. Choose Install Zip From Internal SD
8. Locate Your Downloaded ROM & Confirm To Flash This ROM.
9. Follow On Screen Directions
10. Reboot Your Device
11. First Boot Will Take 3-5 Minutes So Please Patient!
DON'T FORGET TO HIT THANKS BUTTON
Download Link:https://drive.google.com/file/d/0BzWuR9stOc87MW1lXzFNOURCSUk/view?usp=sharing
Contributors:
Sachin Phogat
Rom Firmware Required: V2 KK
Version Information:v1
Created On: 2015-08-19
Last Updated On: 2015-08-19
Click to expand...
Click to collapse
Thanks !! I'll try & provide you feedback!!!
hope camera is 16 MP, & can be installed on V2 of MMX 350
Could you tell how I can disable updater is always crushing
Language issue after flashing with error
It is showing Russian language after flashing
Can you help??
I flashed it on wiko Highway V19
Praful Pradhan said:
It is showing Russian language after flashing
Can you help??
I flashed it on wiko Highway V19
Click to expand...
Click to collapse
You need to wipe data and system for perfect installation
Praful Pradhan said:
It is showing Russian language after flashing
Can you help??
I flashed it on wiko Highway V19
Click to expand...
Click to collapse
Bro,U R Not Supposed To Flash On Wiko v19,as It Got Merged Storage And This Rom Is For Non Merged.....First Flash v2 through Sp Then flash Miui6..
Done this 4 times !! but failed!!!
Mr.Ak said:
Bro,U R Not Supposed To Flash On Wiko v19,as It Got Merged Storage And This Rom Is For Non Merged.....First Flash v2 through Sp Then flash Miui6..
Click to expand...
Click to collapse
Tried all but IMEI showing invalid!!!
restored 2 times but still showing IMEI invalid!!!
who got perfect flashing???
kindly help
Praful Pradhan said:
Tried all but IMEI showing invalid!!!
restored 2 times but still showing IMEI invalid!!!
who got perfect flashing???
kindly help
Click to expand...
Click to collapse
Bro Check Ur About Phone Settings , If Baseband Is Unknown then U will Have To Do This Trick With MtkDroidTools And After That Replace nvram folder Also...
whenever i 'm flashing any ROM, my IMEI no. get lost, i restored IMEI no by CMW back up. (WikoV19)
Please help me what is perfect solution for it??
now camera is not working.. no phot get saved in phone memory,,, what shall i do,
i'm now on wiko V19
Praful Pradhan said:
whenever i 'm flashing any ROM, my IMEI no. get lost, i restored IMEI no by CMW back up. (WikoV19)
Please help me what is perfect solution for it??
now camera is not working.. no phot get saved in phone memory,,, what shall i do,
i'm now on wiko V19
Click to expand...
Click to collapse
Bro go back To Stock v2 then Flash Miui6,It Will Work Perfectly...:good:
---------- Post added at 04:42 PM ---------- Previous post was at 04:42 PM ----------
FAQ
FAQ
Q:Sensor not Working ?
A: install the rom
swicth off the ur phone into 5 Min
then on ur phone
and see sensor working
enjoy
Q:How to enable ROOT ?
A:First open any app which requires root permission and use it but a pop-up will appear that will say you dont have root access.
Then go into Security > Permissions > Root Access. There you will see the app which requires root. Click on it then it will ask you to accept the permissions.There will be 4 or 5 Pop-ups and in each you will need to wait 5 sec. After it gets completed you will get root access for the respective app.
Q: System Animation is slow?
A: Go to setting>Additional Settings>developer option, and change these values:
window animation scale->.5x
transition animation scale->.5x
animator duration scale->.5x
Q: Getting message "Dont Cover the orange area of screen!"???
A: It is a feature of MIUI6 to prevent Pocket Dial, To Disable this goto SETTINGS>ADDITIONAL SETTINGS>DISPLAY and disable prevent pocket dial.
Q:Confused Between Buttons??
A: Menu Button>Recent Apps
Back Button>Back
Home Button >Home
Menu Button(longPress)>Options
Note : to change these: Goto SETTINGS>ADDITIONAL SETTINGS>BUTTONS and customise as per ur need
Q:How to Change default storage?
A: Goto SETTINGS>ADDITIONAL SETTINGS>Storage and change as per ur requirements.
Q: How to add widgets/replace icons?
A: Just pinch the homescreen and customise as u like..
Q: How to Set Personal Ringtones?
Alay Your rintone/music/song which you want to set ringtone and tap on albumart>select "..." and click set as ringtone. SEE IMAGE BELOW:
Q: How To remove any chinese app(if u dont like that)
A: Simply Uninstall from app manager..
Q: How to move apps to SD-Card ?(if u dont like that)
A: Moving apps to sd does not works on MIUI.
Q: How to Turn ON flash light from Lock Screen ?(if u dont like that)
A:The lock screen on the MIUI v6 or v5 had a few extra functions than the standard unlocking and shortcuts. One of them is turning flashlight On directly from the lock screen. For that, while the screen is active but locked, you just need to long press the home button and the torch / flashlight turns on. It would not turn off until you prompt it although the screen would go blank in a few seconds.
Q: How to Change the look of Multitasking / Recent Menu ?(if u dont like that)
A:By default, when you press the Recent key (the left bottom one), the recent apps show up, and it is just the App icon that is seen. But, you can make it look like the iOS multitasking screen where large thumbnails are shown, with the preview of what is going on in the app. You can change that by “pinching out on the empty area in the multitasking screen”. Pinching in / out is what changes the look, basically.
Thats It...
Yeppee finally installed it !!!! Enjoying now, logged to my MI account & it's working !!!
Thanks for the great ROM !!
I'll provide you feedback soon !!!
I was waiting for it since long time !!
Thanks dear !! keep working hard,
Post your ROM on official MIUI site.. ( http://en.miui.com/forum.php?mod=viewthread&tid=111970&page=1&extra=#pid2848979) will help others a lot thanks again !!!
---------- Post added at 02:00 AM ---------- Previous post was at 01:56 AM ----------
Thanks AK,
What i done,
1. restored last nano android backup & then got IMEI no.
2. then again restored again IMEI no. + Sr. no. with SN station.
3. Flashed MIUI6
Yeepeee Done !!!
& Happy
MIUI Screen shots !!!
Attached screen shot of MIUI !!!!
cant find advance option in recovery mode
Please help as I am unable to find any advance option in recovery mode. I used Rom manager , TWRP etc but when it boots in recovery mode it automatically takes the default boot loader.
---------- Post added at 04:06 PM ---------- Previous post was at 04:03 PM ----------
please help as I am unable to find the advanced option in recovery mode. I tried ROm manager etc but when it reboots it loads its default recovery not showing the advanced option. Please hep as after long time got to see a stable MIUI.....
---------- Post added at 04:26 PM ---------- Previous post was at 04:06 PM ----------
Mr.Ak said:
Bro go back To Stock v2 then Flash Miui6,It Will Work Perfectly...:good:
---------- Post added at 04:42 PM ---------- Previous post was at 04:42 PM ----------
FAQ
FAQ
Q:Sensor not Working ?
A: install the rom
swicth off the ur phone into 5 Min
then on ur phone
and see sensor working
enjoy
Q:How to enable ROOT ?
A:First open any app which requires root permission and use it but a pop-up will appear that will say you dont have root access.
Then go into Security > Permissions > Root Access. There you will see the app which requires root. Click on it then it will ask you to accept the permissions.There will be 4 or 5 Pop-ups and in each you will need to wait 5 sec. After it gets completed you will get root access for the respective app.
Q: System Animation is slow?
A: Go to setting>Additional Settings>developer option, and change these values:
window animation scale->.5x
transition animation scale->.5x
animator duration scale->.5x
Q: Getting message "Dont Cover the orange area of screen!"???
A: It is a feature of MIUI6 to prevent Pocket Dial, To Disable this goto SETTINGS>ADDITIONAL SETTINGS>DISPLAY and disable prevent pocket dial.
Q:Confused Between Buttons??
A: Menu Button>Recent Apps
Back Button>Back
Home Button >Home
Menu Button(longPress)>Options
Note : to change these: Goto SETTINGS>ADDITIONAL SETTINGS>BUTTONS and customise as per ur need
Q:How to Change default storage?
A: Goto SETTINGS>ADDITIONAL SETTINGS>Storage and change as per ur requirements.
Q: How to add widgets/replace icons?
A: Just pinch the homescreen and customise as u like..
Q: How to Set Personal Ringtones?
Alay Your rintone/music/song which you want to set ringtone and tap on albumart>select "..." and click set as ringtone. SEE IMAGE BELOW:
Q: How To remove any chinese app(if u dont like that)
A: Simply Uninstall from app manager..
Q: How to move apps to SD-Card ?(if u dont like that)
A: Moving apps to sd does not works on MIUI.
Q: How to Turn ON flash light from Lock Screen ?(if u dont like that)
A:The lock screen on the MIUI v6 or v5 had a few extra functions than the standard unlocking and shortcuts. One of them is turning flashlight On directly from the lock screen. For that, while the screen is active but locked, you just need to long press the home button and the torch / flashlight turns on. It would not turn off until you prompt it although the screen would go blank in a few seconds.
Q: How to Change the look of Multitasking / Recent Menu ?(if u dont like that)
A:By default, when you press the Recent key (the left bottom one), the recent apps show up, and it is just the App icon that is seen. But, you can make it look like the iOS multitasking screen where large thumbnails are shown, with the preview of what is going on in the app. You can change that by “pinching out on the empty area in the multitasking screen”. Pinching in / out is what changes the look, basically.
Thats It...
Click to expand...
Click to collapse
Please help as I am unable to find any advance option in recovery mode. I used Rom manager , TWRP etc but when it boots in recovery mode it automatically takes the default boot loader.
saikatsurfs said:
Please help as I am unable to find any advance option in recovery mode. I used Rom manager , TWRP etc but when it boots in recovery mode it automatically takes the default boot loader.
---------- Post added at 04:06 PM ---------- Previous post was at 04:03 PM ----------
please help as I am unable to find the advanced option in recovery mode. I tried ROm manager etc but when it reboots it loads its default recovery not showing the advanced option. Please hep as after long time got to see a stable MIUI.....
---------- Post added at 04:26 PM ---------- Previous post was at 04:06 PM ----------
Please help as I am unable to find any advance option in recovery mode. I used Rom manager , TWRP etc but when it boots in recovery mode it automatically takes the default boot loader.
Click to expand...
Click to collapse
Bro just Take Any Working Recovery Of V2 And Flash Through Sp Flash Tools...Its That Easy..
\BTW IF U still Dont Understand,pls Contact Me Via Whatsapp +919468519959:good:
I'm not getting 3G or H+, notification... Net speed is slow...plz help....
Sent from my Micromax A350 using XDA Free mobile app
An tu tu benchmark!!!
Sent from my Micromax A350 using XDA Free mobile app
Related
ROM◥███◣ CriskeloServanTeam V12◥███◣-ICS 4.0.3 - 15 Togg full working (Oficial LPW)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM CRISKELO SERVAN TEAM ICS
CriskeloServanRom SGS2 4.0.3 oficial Firm XWLPW
LINK
CriskeloServanTEAM-V12-XXLPG-MD5-122F4E135791D81F704F6BB7AE98EA6A.zip
Apps STOCK
APP_EXT_LPW.zip
Click to expand...
Click to collapse
If you don't already have CWM, You have to install it before install the rom. (As CFROOT).
Download the latest Criskelo ROM and put it on your INTERN SD card.
Open your CWM Application, select flash Update, and select the rom zip.
Say "yes", your rom will be installed.
Enjoy !
CriskeloServanTEAM ICS V12
LINK
CriskeloServanTEAM-V12-XXLPG-MD5-122F4E135791D81F704F6BB7AE98EA6A.zip
Changelog v12
• Base Rom XWLPG
• CF-Root-SGS2_XX_OXA_LPG-v5.5-CWM5
• Modem ADD LPG
• Deodex
• Superuser ADD apk
• Pitcher ApexLauncher ICS.Ahora if you included.
• ICS Launcher ADD ModificadoToucWizUX S3-1.3-5x5
• ICS stock BrowserPlus ADD Browser
• ADD Commando added Voices
• Removed the phrase ADD, slide your finger to unlock, lock screen
• ADD finished theming in xml for bar colors, ram, progress, actulizaciones, etc ...
• ICS keyboard AOSP
• Samsung keyboard ICS
• AppWidgetPicker (grouping the widgets of the same APP)
• ADD Roletube App that lets you download YouTube Video (SDCARD / Download)
• Host updated to avoid advertising
• Everything you need to run VPN (not tested) Thanks to ookba
• ADD Version of Rom Added on about the phone (Settings.apk)
• ADD Version of Theme Added on about the phone (Settings.apk)
• Mod SMS are not logged in CallLog
• Enabled the option CallRec Phone
• Several tweaks Framework-res.apk
• ICS Color Icons in statusbar
• ADD Criskelo Walpapers in gallery
• ADD more Walpapers in Walpapers TW
• ADD ICS Gallery Google
• ICS style DialPad
• Mod Jkay in blue (need to install the apk Deluxe Settings, it is not included in fee)
• Beats Audio
• Sony Bravia Engine
• No incremental tone
• Music player Added S3
• And more details, to improve the overall stability of the ROM
Acknowledgments:
Special thanks to @ Josechufa Head-Beta, follow us on the S2 and spend the witness to mount the V12, a @ Ph0enyx for helping me test it and give me such good advice given to me and has all the betas in genenal.
To install V11.2 coming from the kernels and cleaner inside. If you give porblemas already know that the V5 is miraculous, meteis V5 first and then the V12 but I hope this may not need.
But only include the Framework Jkay Deluxe, if you want to enjoy all the advantages in buying your APP Play Google or SlideMe
Acknowledgments:
Thanks to josechufa and maquinabaja, for their contributions to help me make this great rom, a glutton for power PNG menu and follow the whole team for making this rom, best.
Click to expand...
Click to collapse
A SYPS54 and Josechufa, working on the graphics of the ROM
and :
@ Jkay
@ Chainfire
@ wanam
@ Josechufa
@ intronauta
@ Team
To all the developers who share information and successesdesinteresádament
And all of you, you help testing and reporting greatly Failures and Successes of the ROM. All help is welcome to improve.
Res----------
THIS IS FOR CLEAN INSTALL TO INSTALL CRISKELO V12 EXPANDED GUIDE
Here is a list of files to start with including links not all are needed just grab ones which are mentioned to complete stage u wish to be at if your comming from another rom like GB or cm9 i recommend everystage..
*I9100XXLPH-base Rom 4.0.3
*CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5
*kernel Cleaning Script-2.6.4
*Triangle Away 1.25
*CriskeloServanTeam-v12-XWLPG
*CF-Root-SGS2_XX_OXA_LPW-v5.5-CWM5
*CriskeloServanTeam-V10-XWLPD
*CriskeloServanTEAM V5
*CriskeloServanTeam-v7-XWLP4
*CF SGS2_XX_OXA_LPS-v5.4-CWM
STAGE 1 This will give you a fresh and also clean install of ICS
To start with download ODIN 1.85
OK this is the point where you should backup apps with TitaniumBackup and transfer the content of your sd card files to PC/Mac.
quick guide to flash with Odin
1. Reboot into recovery and delete everything factory reset/wipe data and format sd cards after everything is deleted and nothing is left next..
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key + Home button + press the power button.
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the md5 file that you extracted from I9100XXLPH-base Rom 4.0.3 link at top
Add the files into the corresponding section of Odin PIT> PIT, PDA> CODE, PHONE> MODEM, CSC> CSC.
6. Connect the USB cable and wait for the ID:COM section to turn yellow
7. Click start to flash
8. Do NOT disconnect the cable or turn off the device, it will reboot when it finishes.
OK now you have stock ics LPH install you will now need to gain ROOT to do this unzip CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5.zip and you should have a tar file.
1.Reboot your phone to download mode Down volume key+ Home button + press the power button.
2.Hopefully you still have odin open if not Start Odin again.
3.Click on the PDA button and browse to the Tar file CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5
4.Connect the USB cable and wait for the ID:COM section to turn yellow then Click start to flash
5.Do NOT disconnect the cable or turn off the device, it will reboot when it finishes.
now you have ROOT and also CWM installed
STAGE 2 So now Download criskelo v5 and v12 also needed kernel Cleaning Script and Triangle Away to Internel storage.
once you have all files enter CWM Recovery>>then Goto Install zip from sd card>>choose zip from internel sdcard>>flash criskelo v5.
let the rom boot up and leave alone for like 5 mins now you can use triangle away this will reset all binary counter also remove yellow triangle.
next boot into recovery again use the kernel cleaning script once complete flash criskelo v12 instanstly do not reboot from using kernel cleaner once criskelo v12 has installed let it boot up again leave alone for at least 5 mins to build cache.
If at any point you get stuck at the bootlogo repeat the process of using kernel cleaner then reflash rom which at the stage you was on.
ill try soon..thank you cris
Sent from my GT-I9100 using xda premium
Thanks very much Criskelo for the great support for this ROM.
I'm going to try and update...... Best regards.
-----------------------
Rom installed OK.
Siyah kernel installed OK.
ROM first look is OK.
Arabic works OK.
** How can I move the clock to right side of home screen?.
---------- Post added at 03:34 AM ---------- Previous post was at 02:46 AM ----------
DJBoxer said:
great work again criskelo
hope still okay to create mirror in my signature.
Click to expand...
Click to collapse
Hi, why did you remove the ROM? Is there any Problem?
I download it and installed it, everything looks OK.
codo2003 said:
Hi, why did you remove the ROM? Is there any Problem?
I download it and installed it, everything looks OK.
Click to expand...
Click to collapse
i uploaded my version by mistake
sorry
i will add the correct version as i reply to this may take a while to upload isp beening a ***** and capped me to 10mb blah upload speed 264kbs
until then hammer hotfile till further notice i update themes etc after i sleep
You mean, there is a different between the 2 ROMs. ???.
codo2003 said:
You mean, there is a different between the 2 ROMs. ???.
Click to expand...
Click to collapse
yes can u check your build prop please at very bottom does it say my name ?
i added more tweaks and changed kernel to siyah when chris added CFroot also faster gps fix.
it works fine as its what im using but i was adding bootanimations to downloads sum reason the md5 didint look right so i pulled it down until further notice i may have this wrong and was correct version so until i grab from hotfile again blah 19min wait i just want to be safe and make sure is correct version which is criskelo full work untouched.
DJBoxer said:
yes can u check your build prop please at very bottom does it say my name ?
Click to expand...
Click to collapse
NO. It doesn't...
The last line is:
dalvik.vm.stack-trace-file=data/anr/traces.txt
I download from hotfile and the size is the same.
So what you suggest now..
codo2003 said:
NO. It doesn't...
The last line is:
dalvik.vm.stack-trace-file=data/anr/traces.txt
I download from hotfile and the size is the same.
So what you suggest now..
Click to expand...
Click to collapse
***facepalm**** damn my mistake just means i deleted the wrong one by mistake lol
ok thanks for letting me know
DJBoxer said:
***facepalm**** damn my mistake just means i deleted the wrong one by mistake lol
ok thanks for letting me know
Click to expand...
Click to collapse
It's OK. you are uploading the one again.
I tried the original one from hotfile, and no change.
** How can I move the clock to right side of the apex launcher home screen.
Cool... I just downloaded and installed V7 yesterday after DJBoxer shared the link!
And I see V10 today!!! ...
What is the change from V7 to V10?
The screen shots seems to be from V5/V7 mix and also the change log description seems like its carried forward from previous post.
I would really appreciate if I can get to know the changes in V10.
codo2003 said:
It's OK. you are uploading the one again.
I tried the original one from hotfile, and no change.
** How can I move the clock to right side of the apex launcher home screen.
Click to expand...
Click to collapse
yes thats the one i will be uploading is the one criskelo has to hotfile just soon hotfile will remove it and will have about 100+ posts saying it
thats all from me tonight as 4.21am i add more stuff etc for v10 in morning
including clock on the right etc and updated themes
Go ahead aschip and install it, it is perfect.
I advice you to:
Wipe Cache, Dalvik cache, Battery status, fix permissions and reboot.
aschip said:
Cool... I just downloaded and installed V7 yesterday after DJBoxer shared the link!
And I see V10 today!!! ...
What is the change from V7 to V10?
The screen shots seems to be from V5/V7 mix and also the change log description seems like its carried forward from previous post.
I would really appreciate if I can get to know the changes in V10.
Click to expand...
Click to collapse
Changelog:
• Base Rom XWLPD
• CF-Root-SGS2_XX_NEE_LPD-v5.4-CWM5
• ADD Modem LPW
• Superuser ADD apk
• Host updated to avoid advertising
• ADD Version of Rom Added on about the phone (Settings.apk)
is the main changes within the new v10 a much better and stable base also the new modem which gives a balance of stabilty in battery and performance.
giving u basically a much better user experince from using criskelo roms
Okay guys need some help, just got my SGS2 back from service with a stock ics rom and kernel. I went to chainfires thread and can`t find my kernel to flash to get root...here is a pic of my kernel, which one should I use to flash and get root and cwm??? Please advise....btw this is a Canadian kernel for bell/virgin, but my phone is unlocked and on Rogers and I can`t stand stock...ugh...
DJBoxer said:
Changelog:
• Base Rom XWLPD
• CF-Root-SGS2_XX_NEE_LPD-v5.4-CWM5
• ADD Modem LPW
• Superuser ADD apk
• Host updated to avoid advertising
• ADD Version of Rom Added on about the phone (Settings.apk)
is the main changes within the new v10 a much better and stable base also the new modem which gives a balance of stabilty in battery and performance.
giving u basically a much better user experince from using criskelo roms
Click to expand...
Click to collapse
I am behind a firewall, so cant access hotfile, on your wuala link, it has a comment
"uploading... download once this message has been removed thanks!!"
Should I wait? or its fine to download it from there?
Also, to move from V5 to V7, all I did was put the zip on internal sd card, go to CWM and flash update.
This should work from V7 to V10 as well right?
Somehow the guy above mentioned about wiping dalvik cache, etc. so just wanted to confirm !
caanda45 said:
Okay guys need some help, just got my SGS2 back from service with a stock ics rom and kernel. I went to chainfires thread and can`t find my kernel to flash to get root...here is a pic of my kernel, which one should I use to flash and get root and cwm??? Please advise....btw this is a Canadian kernel for bell/virgin, but my phone is unlocked and on Rogers and I can`t stand stock...ugh...
Click to expand...
Click to collapse
Use siyah kernel, it works for me. http://www.gokhanmoral.com/
aschip said:
I am behind a firewall, so cant access hotfile, on your wuala link, it has a comment
"uploading... download once this message has been removed thanks!!"
Should I wait? or its fine to download it from there?
Also, to move from V5 to V7, all I did was put the zip on internal sd card, go to CWM and flash update.
This should work from V7 to V10 as well right?
Somehow the guy above mentioned about wiping dalvik cache, etc. so just wanted to confirm !
Click to expand...
Click to collapse
im uploading it as we speak
yes this is a no wipe rom no need to do any wipes flash as would a update
codo2003 said:
Use siyah kernel, it works for me. http://www.gokhanmoral.com/
Click to expand...
Click to collapse
So I just flash siyah using odin and it will give me cwm and root and then flash v10?
This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
FAQ:
what do i do if its not booting on start up A- pull battery then restart.(IF YOU HAVE A REMOVABLE BATTERY)
after booting im getting a services have stopped wait or close A- pull the battery and restart.(IF YOU HAVE A REMOVABLE BATTERY)
the tweaks open then close help? A- need to deny super user for it then go in and change what u want then re enable superuser for it
how to install
install like u would any rom then wait for 2 min ( if wont boot )
pull battery and restart then you'll see optimizing apk's count down.(IF YOU HAVE A REMOVABLE BATTERY)
***Guys This Is A Port So remember it will have small glitches here and there but all in all should be stable ***
For starters HOW TO INSTALL a ROM by SAC23
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later https://www.mediafire.com/folder/qc3z1c59s8g03/PHILZ
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....(IF YOU HAVE A REMOVABLE BATTERY)...try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
[LINKS] sac23_Norma_lollipop_port_ for N3 MIRRORS
OP HOST FILE LINK VER 2
MY 1st MIRROR HOST FILE LINK VER 2
MY 2nd MIRROR HOST FILE LINK VER 2 COMING SOON
VER 2 MD5 COMING SOON
OP HOST FILE LINK VER 1
MY 1st MIRROR HOST FILE LINK VER 1
MY 2nd MIRROR HOST FILE LINK VER 1
VER 1 MD5 7bf1e578eee4f63a938ad3a413b33962
saved 2
reserved for future use
saved 3
reserved for future use
saved 4
reserved for future use
saved 5
reserved for future use
thanks for this
Anyone know where I can get the nk4 modem?
http://forum.xda-developers.com/note-3-sprint/general/baseband-modem-nk4-odin-flashable-t2996639
Cowboysfan323 said:
Anyone know where I can get the nk4 modem?
Click to expand...
Click to collapse
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Josephigloe said:
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Click to expand...
Click to collapse
Thanks. i was still download the full rom just for the modem
Does Hotspot work on this?
Josephigloe said:
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Click to expand...
Click to collapse
Ty.
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
- when music is on , Sound management still have Chinese text on the pulldown notification
some other reports are :
- Calling other N3 sound is like a voice change
gabesir said:
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
some other reports are :
- Calling other N3 sound is like a voice change
Click to expand...
Click to collapse
confirming all the above ( in case it helps )
also the settings button in pulldown only opens date / time settings ( unless for some reason that is normal for loli? )
Cowboysfan323 said:
Ty.
Click to expand...
Click to collapse
I don't know if you know but you don't flash in ap either you have to flash in like Csc I think it is.
gabesir said:
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
- when music is on , Sound management still have Chinese text on the pulldown notification
some other reports are :
- Calling other N3 sound is like a voice change
Click to expand...
Click to collapse
Lol its Korean but agree with those issues. I also noticed when I reboot from recovery it gets stuck on the boot animation. Not always but most of the time.
---------- Post added at 11:42 AM ---------- Previous post was at 11:40 AM ----------
Dalek_Caan said:
confirming all the above ( in case it helps [emoji14])
also the settings button in pulldown only opens date / time settings ( unless for some reason that is normal for loli? )
Click to expand...
Click to collapse
Try tapping to the right a little more. It will open settings.
Edit: Well it was for me until I tried it again lol.
Josephigloe said:
I don't know if you know but you don't flash in ap either you have to flash in like Csc I think it is.
Click to expand...
Click to collapse
Didn't know that.
I've downloaded and flashed this rom multiple times. I cant get past the wifi on the initial setup
I set my ip to static ionnected to wifi and let me go through the setup
quoshon said:
I've downloaded and flashed this rom multiple times. I cant get past the wifi on the initial setup
Click to expand...
Click to collapse
Try turning the wifi off at the top right of the screen. It will skip the setup.
Ive also received a phone call and I was not able to answer it. Phone fc'd on me
XDA:DevDB Information
MIUI 6 4.4.2 For Canvas Nitro A310 [Stable] [bugless] [Fast&Smooth], ROM for the Micromax Canvas Nitro A310/A311
Contributors
pintothakur007, [email protected]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-29
FAQ
FAQ
Q:Sensor not Working ?
A: install the rom
swicth off the ur phone into 5 Min
then on ur phone
and see sensor working
enjoy
Q:How to enable ROOT ?
A:First open any app which requires root permission and use it but a pop-up will appear that will say you dont have root access.
Then go into Security > Permissions > Root Access. There you will see the app which requires root. Click on it then it will ask you to accept the permissions.There will be 4 or 5 Pop-ups and in each you will need to wait 5 sec. After it gets completed you will get root access for the respective app.
Q: System Animation is slow?
A: Go to setting>Additional Settings>developer option, and change these values:
window animation scale->.5x
transition animation scale->.5x
animator duration scale->.5x
Q: Getting message "Dont Cover the orange area of screen!"???
A: It is a feature of MIUI6 to prevent Pocket Dial, To Disable this goto SETTINGS>ADDITIONAL SETTINGS>DISPLAY and disable prevent pocket dial.
Q:Confused Between Buttons??
A: Menu Button>Recent Apps
Back Button>Back
Home Button >Home
Menu Button(longPress)>Options
Note : to change these: Goto SETTINGS>ADDITIONAL SETTINGS>BUTTONS and customise as per ur need
Q:How to Change default storage?
A: Goto SETTINGS>ADDITIONAL SETTINGS>Storage and change as per ur requirements.
Q: How to add widgets/replace icons?
A: Just pinch the homescreen and customise as u like..
Q: How to Set Personal Ringtones?
A:Play Your rintone/music/song which you want to set ringtone and tap on albumart>select "..." and click set as ringtone. SEE IMAGE BELOW:
Q: How To remove any chinese app(if u dont like that)
A: Simply Uninstall from app manager..
Q: How to move apps to SD-Card ?(if u dont like that)
A: Moving apps to sd does not works on MIUI.
Q: How to Turn ON flash light from Lock Screen ?(if u dont like that)
A:The lock screen on the MIUI v6 or v5 had a few extra functions than the standard unlocking and shortcuts. One of them is turning flashlight On directly from the lock screen. For that, while the screen is active but locked, you just need to long press the home button and the torch / flashlight turns on. It would not turn off until you prompt it although the screen would go blank in a few seconds.
Q: How to Change the look of Multitasking / Recent Menu ?(if u dont like that)
A:By default, when you press the Recent key (the left bottom one), the recent apps show up, and it is just the App icon that is seen. But, you can make it look like the iOS multitasking screen where large thumbnails are shown, with the preview of what is going on in the app. You can change that by “pinching out on the empty area in the multitasking screen”. Pinching in / out is what changes the look, basically.
Thats It...
reserved
ressrvveedd
just check if hike messenger is working on it or not
in my previous miui hike is unfortunately stopped
TARAGI said:
just check if hike messenger is working on it or not
in my previous miui hike is unfortunately stopped
Click to expand...
Click to collapse
hike working bro
will flash tomorrow morning ... !!!
Where are kernel & other firmware resources for canvas nitro a310?
hi dude thanks for ur awesome rom.. but.. i need some options to fix..
1. lock screen vibration. when i wrongly swipe the pattern or password it vibrating like hell. it's really annoyed.. could u fix it?
2.im using micromax a311 when i try to increase my volume keys it's worked only both keys decreasing.. any way to fix it??
3. Also i need more vibrating modes.. like when i receive message notification in silent mode. that default vibration is too low.. when my phone in pocket. any ideas? to custom vibrating pattern.
i hope u will fix the problems.. thanks alot
Sent from my A310 using xda premium
arunon2013 said:
hi dude thanks for ur awesome rom.. but.. i need some options to fix..
1. lock screen vibration. when i wrongly swipe the pattern or password it vibrating like hell. it's really annoyed.. could u fix it?
2.im using micromax a311 when i try to increase my volume keys it's worked only both keys decreasing.. any way to fix it??
3. Also i need more vibrating modes.. like when i receive message notification in silent mode. that default vibration is too low.. when my phone in pocket. any ideas? to custom vibrating pattern.
i hope u will fix the problems.. thanks alot
Sent from my A310 using xda premium
Click to expand...
Click to collapse
Decrease Vol prob:- bro if ur stock rom go to system/user/keylout and check mtk_tpd.kl file .extract and copy ,replace in miui rom and set permisson rwrr & reboot....may be prob solved
For Vibration prob :- go to settings/sound and see there r a option for vibration ,u can choose slow ,medium , or fast vibration may be ur prob solved
Love the ui
:good:
Installed successfully in my MMX Nitro A310.
will post if any bugs found.
Many thank for the ROm.
Note: For who are using TWRP 2.8.5 ( I used this ) , You have to unmount data, system and cache before flashing. other wise it will show error.
@pintothakur007 please update above step in first post.
Hi ...
@pintothakur007
I installed this ROM. But autorotation not working .
I tried switching off the cell for 5 minutes,
and tried mtk engineering mod app also.. It showing a message "Get calibration failed" and sensor data calibration is empty.
Plz see the screenshot also ...
I was on stock ROM before flashing this.
Plz help me anyone...
Thank you.
Sent from my A310 using XDA Free mobile app
i installed it..noticed 2 bugs as of now...bluetooth not switching on...so bluetooth not working & usb debugging is not working too auto rotation & other sensors are working fine as of now...still there is some chinese **** language do remove tht to...like the recents screen see the ram usage below..also in browser u have ahit chinese bookmarks & all...thtz all & it can run smooth...do release a patch becauseu knw itz not easy downloading the full file again
hmu333 said:
Hi ...
@pintothakur007
I installed this ROM. But autorotation not working .
I tried switching off the cell for 5 minutes,
and tried mtk engineering mod app also.. It showing a message "Get calibration failed" and sensor data calibration is empty.
Plz see the screenshot also ...
I was on stock ROM before flashing this.
Plz help me anyone...
Thank you.
Sent from my A310 using XDA Free mobile app
Click to expand...
Click to collapse
bro auto rotation & sensor working fine . reflash ur rom bro may be it worked
oopsgeneration88 said:
i installed it..noticed 2 bugs as of now...bluetooth not switching on...so bluetooth not working & usb debugging is not working too auto rotation & other sensors are working fine as of now...still there is some chinese **** language do remove tht to...like the recents screen see the ram usage below..also in browser u have ahit chinese bookmarks & all...thtz all & it can run smooth...do release a patch becauseu knw itz not easy downloading the full file again
Click to expand...
Click to collapse
let me check
pintothakur007 said:
let me check
Click to expand...
Click to collapse
yeah sure...
no use bro.. i tried i replaced that key layout file also.. not worked. it's really annoyed bro. also. vibration that settings also not worked...also. i find one more bug..i cant reduce my screen brightness with any app.. night time it is very annoying. I tried many more screen dim apps. but. nothing worked. give me the solution as soon as possible.. developer.. thanks
Sent from my A310 using xda premium
did u try fixing it...i also found another bug...when i am using pattern,pin or password & then when i swipe to the phone side it just hangs & then i have to lock phone & the swipe screen up to unlick the swipe lock does not work with diaker as tge pattern does not show
oopsgeneration88 said:
i installed it..noticed 2 bugs as of now...bluetooth not switching on...so bluetooth not working & usb debugging is not working too auto rotation & other sensors are working fine as of now...still there is some chinese **** language do remove tht to...like the recents screen see the ram usage below..also in browser u have ahit chinese bookmarks & all...thtz all & it can run smooth...do release a patch becauseu knw itz not easy downloading the full file again
Click to expand...
Click to collapse
Bro, Bluetooth working . restart your phone after trying to switch on bluetooth. worked for me.
proximity sensor working or not???
---------- Post added at 09:24 AM ---------- Previous post was at 09:02 AM ----------
also icons in notification bar are too small...
hmu333 said:
Bro, Bluetooth working . restart your phone after trying to switch on bluetooth. worked for me.
Click to expand...
Click to collapse
bluetooth worked now but still usb debugging noy working some minor ui fixes also needed...languages need to be fixed...themes are only working in chinese tht also needs to be fixed
SYSTEM PARTITION NEEDED
Galaxy Evolution Note 7 V5.1 Looks like Marshmallow 6.0.1 for MicroMaX A116 HD (MTK6589) [SUPERFAST] [SUPERBATTERYBACKUP]
-Latest Android 4.4.4
-Latest Android 4.4.4 Stock Camera with Gallery with 16 MP front & rear camera
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed (Note 7)
-New Status Bar (Note 7)
-3G SIM Switch
-Sim Toolkit
-New Bootlogo (Note 7)
-Init.d Scripts
-Latest Playstore
-New LockScreen (FingerPrint Lock) (Note 7)
-New Dialer (Note 7)
-New Contacts (Note 7)
-New Messages (Note 7)
And Many More.........
Bugs :
Tell if you see any more....
Installation :
How To Flash :
use KK support CWM / TWRP or any other Recovery AND system partition needed. (Google It)
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW / TWRP Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
Screen Shots
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only.
Original ROM Developer :- http://forum.one-teams.com
(credits : trzpro , NeedRom, xda developers, 4pda.net . If I forgot a any developer name please suggest me I will add defiantly & Swapnil Bunjkar )
Credits & Big Thanks :
hyperion70 - For his Kernel for MT6589 and ROM Developer.
All things happen because of all above users, developers and forums, so give Thanks and Credit them,
I am not developer I am just Porter.
Custormroms.theSwapnil.com
will this work in a116i? i wont face camera issue ?
brother, where is the download link?
and the link to system partition, the site is in Russian and can not log in
Yeah where is the link
Guys
You can download it from here
https://usersfiles.com/gxe8usvjqdr5
---------- Post added at 12:06 ---------- Previous post was at 11:53 ----------
For Ritz Partition follow this thread
http://forum.xda-developers.com/showthread.php?t=2771318
there is no way but simple to create Ritz Partition
thanks for your work but i got a serious issue with this rom.
firstly it installed well and booted. ran for about 30 mins. was giving settings fc bug. then it jus hung up and the handset started heating so much. i had to remove the battery and cool down the handset and tried to boot back but no luck. the rom was stuck at the boot logo on every boot.
so i had no option but revert back to my old system.
i hope this review helps to sort out the issue
How to remove evolution text
Fatic said:
How to remove evolution text
Click to expand...
Click to collapse
Its in Evolution Settings> Custom Carrier Label
Unabe to boot after samsung galaxy 7 evolution. Logo.
SAme Here
rahulraina923 said:
Unabe to boot after samsung galaxy 7 evolution. Logo.
Click to expand...
Click to collapse
I Also got Stuck on the logo. Hey can anybody help us with this .
INSTALLATION
With custom TWRP recovery
1.If you have installed one rom, which came with your mobile, official or not or If you have the Indian Stock Miui see 6b & 6c.. You must have battery over 80% and of course have TWRP. The rom is stable release without root. If you want root see the instructions. My advice : if you are happy with your curent rom dont change it. Make full backup first to have it.
2. We put the rom bulk on the mobile (not in a folder) or a USB / OTG
4. Turn off our phone through the system or by pressing the right button (on / off).
5. Than on mobile press simultaneously for some time the volume up button (+) & on / off up to write LeEco Recovery and then leave it.
6. Enter to the TWRP recovery and if you have the previous 20s, press Wipe> advance wipe and select (Data & Cache & ART DALVIC cache) known factory reset. We slide right to do. Or just drag the slide down to the right to be alone. It can work just fine with the 2 wipes only (Cache & ART DALVIC cache) and stay all your applications in place, but the right is the previews step. Go on step (7)
6b. only [/ B] If you are from stock Indian with encryption already full wipe & Internal Storage and after put the Rom on mobile through TWRP and flashing.
6c.b If you are with another rom CM, Miui, Mokee etc., Advance wipe and select all except[/ B] Internal Storage.
7. Go back on first TWRP page, press INSTALL and find the rom to choose and do slide right to install. When finishes do not do anything it reboots to system.
9. The first start will not be long just about 3 min & 18 seconds!!.
10. When you enter the system and after you finish your settings, go to Settings - Phone information - press 7 times in a row in version number - (so you become programmers) then go back - Developer options - both within and check: USB debugging and down there that says (three are gathered) window animation scale, transition animation scale, Scale Animator duration, step inside them and choose everywhere like numbers 0.5 to go more fast than ever! All so if you want go on tab phone info, press my upper logo and see all my work/roms.
12. If you are facing problems with video streaming - live - sending etc on Instagram - Facebook - Google Duo app - Watsup etc flash this through TWRP after finishing the installation and system settings.
Link>>> https://mega.nz/#!sJUBUIoK!OCyhMtpLmfIym5QsjBDnB_qes58-3Zopyj0CH-G-MjQ
13. Whoever wants to put root & xposed just put those patch-zips (first root then xposed).
1. Root>> https://mega.nz/#!UB1GXAhJ!3sjZ58B8iKJjtjTbr8VzS7uKDihkE3yB_98Lc9gcxPg
2. Xposed>> https://mega.nz/#!AZlxmDSD!Ohit_E5auurvMw7A3EO2EQySP8B6GMHZzMYT1Jmqd0s
All with TWRP to install them without wipe before and after and then through the system make update/download through cloud in XposedInstaller 3.1.1.apk and press install give root rights reboot and you are ready.
14. For patches V4A check this https://forum.xda-developers.com/showpost.php?p=71698629&postcount=663
145 Enjoy your new rom!
ChangeLog
Rom is working very smooth with all components. Is a result of patch/update rom from this source>> bbs.le.com/thread-2324110-1.html
Rom has 85 Languages to choose your own (framework & settings).
Debloat all China Applications: Live, LeSo, LeMall, LeStore etc.
Improved applications for better response sign/zipalign at boot.
Init.d support & sqlite scripts. Moded APN & gps.config for EU/International.
Default the Greek language in Setup. Choose your one. All so let be China Location.
Add Greek translations with 22,000 rows, where possible approximately 99%.
Add to build.prop tweaks for battery ,better CPU-GPU response, fast mobile signal, direct call, 4G-Lte as default, GPS config for EU satellites, by locking in 10seconds. and more!
All GAPPS included! Rom has preinstalled YouTube,Chrome,SwiftKey. Be cearful if you upgrade them may be not working the shortcuts.
Preinstalled is now the moded stock Launcher debloated from Chinese Windows with many languages, options and settings, including additional themes, 3D, Iron, Crystal, IOS7, etc., to choose from. Choose from themes store and apply.
Added new alarms, notifications, for sms, e-mails etc.
Added all LEui themes that work nicely with our new Launcher.
Add possibility adb, mtp, shell without limitation, changing the kernel
The camera is all ready set, to support cam2API for LiveVideo, messenger/facebook etc. Just use previews version of those from internet and not from play store.
Download Link
https://mega.nz/#!hVlFSSBD!TdmK9_O03753qJGxlUAaukiV3hT1dw5nKfU2seZe2Ik
Languages & Screenshots
XDA:DevDB Information
[LeMax2][5.9.022S]CrisBalGreece/Stable/Root/Xposed/80Lang, ROM for the LeEco Le Max 2
Contributors
CrisBalGreece
Source Code: http://bbs.le.com/thread-2324110-1.html
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-02-08
Last Updated 2017-02-12
Finally! It was about time.
Thank you, Cris.
Sörnäinen said:
Finally! It was about time.
Thank you, Cris.
Click to expand...
Click to collapse
Thank you for trying my roms. Everything works great now.
CrisBalGreece said:
Thank you for trying my roms. Everything works great now.
Click to expand...
Click to collapse
Hi Cris ,
big thanks again for the great rom!!!
Request...
1. could we replace all leeco apps like browser, dialer, calculator, calendar etc with google apps please?
if possible Gdrive link please...
thanks
---------- Post added at 07:58 AM ---------- Previous post was at 07:56 AM ----------
xuser_ said:
Hi Cris ,
big thanks again for the great rom!!!
Request...
1. could we replace all leeco apps like browser, dialer, calculator, calendar etc with google apps please?
if possible Gdrive link please...
thanks
Click to expand...
Click to collapse
also, is it possible to have feature like livedisplay (or any other inbuilt way to have warmer color display except leeco color mode etc..)
xuser_ said:
Hi Cris ,
big thanks again for the great rom!!!
Request...
1. could we replace all leeco apps like browser, dialer, calculator, calendar etc with google apps please?
if possible Gdrive link please...
2. also, is it possible to have feature like livedisplay (or any other inbuilt way to have warmer color display except leeco color mode etc..)
Click to expand...
Click to collapse
1. Yes i can remove all Leeco apks and make new rom without all this but all the SYSTEMUI shortcuts it will not working then through the down left virtual button. I can't put all the apks that you said because they don't have (all) appache licence to use it.
2. No for the moment but in the future i will try.
Hi Cris
thank you again
what's difference between 20s and 22s rom?
can you say to us
dadashi.reza said:
Hi Cris
thank you again
what's difference between 20s and 22s rom?
can you say to us
Click to expand...
Click to collapse
All most nothing! Except the new kernel (with some modifications-read the OP-) and some updated libraries with apks that supported. All the others is the same like 20s. If you are whaiting to find on this rom, some new interface actions (except the Launcher) you don't find it. Except of cource my modifications
CrisBalGreece said:
1. Yes i can remove all Leeco apks and make new rom without all this but all the SYSTEMUI shortcuts it will not working then through the down left virtual button. I can't put all the apks that you said because they don't have (all) appache licence to use it.
2. No for the moment but in the future i will try.
Click to expand...
Click to collapse
ok then, will wait for clean(after removing all leeco apps) 22s ROM
will add apps later through playstore
Thanx for you work! Flashed it yesterday and all fine but as other also write: there are still to much cn apps, browser which only has cn search,background app, wallet, theme store .. And geofence seems not to work in europe, i can set my location for wifi switch on/off and loundness but it doenst work.
And another question: why work the long press homebutton not with google? On other phones there is no problem but on the max 2 i cant set to open google with long press homebutton, with no rom (test mokee, RR)
tasar said:
Thanx for you work! Flashed it yesterday and all fine but as other also write:
1. there are still to much cn apps,
2 browser which only has cn search,
3 background app,
4 wallet,
5 theme store ..
6 And geofence seems not to work in europe,
7 i can set my location for wifi switch on/off
8 loundness but it doenst work.
9 why work the long press homebutton not with google? On other phones there is no problem but on the max 2 i cant set to open google with long press homebutton, with no rom (test mokee, RR)
Click to expand...
Click to collapse
1. All the remaining apps by me has left because they are necessary for store and stock launcher to download themes and fonts.
2. Stock browser has all search providers. The 3rd from the end is Google the 2nd is BING etc. Change local to US or other countrys to see them on English. Stock browser is necessary for scanqr code to working.
3. Background app???
4. Wallet yes it's not necesary apk.
5. Theme store is on China language but i manage to translate it to greek that's why is inside. All so the themes inside is for global use and there are very nice.
6. I dont use it all so but maybye other users can and is needed for wifi smart lock.
7. For me working perfect maybye you make something wrong?
8. Loundness??? Dolby Atmos?/ Working ok here...
9. Install the apk, make it system app, give the proper symlinks to open it from there. With China location there is'nt this feature.
Many thanx chisbal!!
Backgound is my free interpretation of wallpaper, because english is not my favorite language and school is a longggg time ago The are many cn wallpapers/letters but its ok
Stock browser ok, dont know that because its very difficult for me to read cn
With loudness i mean the option´s under geofence (in telephone manager). In geofence you can set locations and then wifi/loundness switch automatically when you in this location (you know the app Llama? its similar) But this downt work and it looks like this uses "Baidu", because there is a small logo from Baidu.
Do you know, why long press home button not work with google? It opens only MIUI special settings to assign the keys.
tasar said:
Many thanx chisbal!!
Do you know, why long press home button not work with google? It opens only MIUI special settings to assign the keys.
Click to expand...
Click to collapse
The stock browser all so i manage to translate him on Greek. Like i say on my previews post, you must nstall the apk, make it system app, give the proper symlinks to open it from there. With China location there is'nt this feature only the special settings.
Problem solved. Sorry for bothering.
Sörnäinen said:
Sadly I can't download from Mega. It says download link not available?
Click to expand...
Click to collapse
Witch link? Rom? Xposed? Root?
CrisBalGreece said:
Witch link? Rom? Xposed? Root?
Click to expand...
Click to collapse
I had a typo.
But: The Xposed link isn't working. It says file not available?
Sörnäinen said:
I had a typo.
But: The Xposed link isn't working. It says file not available?
Click to expand...
Click to collapse
Please try again. Just check it and working. Maybe some Mega malfunction. Just re-posted.
CrisBalGreece said:
Please try again. Just check it and working. Maybe some Mega malfunction. Just re-posted.
Click to expand...
Click to collapse
Thank you!
It works now.
I wonder if it was rather the XDA app, to be honest. Maybe the old link was still in my cache?
Anyway, it works! I'm happy.
Sörnäinen said:
Thank you!
It works now.
I wonder if it was rather the XDA app, to be honest. Maybe the old link was still in my cache?
Anyway, it works! I'm happy.
Click to expand...
Click to collapse
Thank you for your trying and sorry about that.
Don't forget to follow the steps upon installing.
CrisBalGreece said:
Thank you for your trying and sorry about that.
Don't forget to follow the steps upon installing.
Click to expand...
Click to collapse
There are quite many, yes. I will take care.
Sörnäinen said:
There are quite many, yes. I will take care.
Click to expand...
Click to collapse
No they are 3 steps but I'm hyper analyzing them.
Put xposed and on system go to apk press the cloud give root rights and reboot. That is all.