Sprint lg g3 ls990 100% unlock tm/att/inter - Sprint LG G3

NEW UPDATE​ everything ON YOUR LG G3 WILL BE DELETED
I AM ALSO HAVE THE UNLOCK FOR THE LG G2 LS980 HERE
AND THE
SPRINT S4 L720/T HERE
THIS MAY LOOK LONG BUT ITS STEP BY STEP FOR NONE ADVANCED PEOPLE
everything you do will be own your own responsibility but nothing should go wrong if you follow step by step and DONT SKIP ANY STEP
you should be able to use any carrier at H+ speed .
you cant use 4G because of the phone modem chip its not powerful.
IF YOU ARE ALREADY ON LS990ZV8 SKIP PART 1.
PART 1:first you will need some files on you computer you will needs these for part 1.
1.LG Drivers
2.TOT FLASH TOOL / MEGALOCK
3.LS990ZV8.ZIP / LS990.DLL
PART 2:part 2 which is the unlocking process(dont transfer these file to the device until you are done with the flashing with the lg tool.because that will reset the device and then you have to transfer them again)
1.lollipop root from this thread
thanks to
AVICOHH and qbking77 and
Unjustified Dev for the original guide
Chain fire for Supers SU
2.ls990recovery.apk
3.fix.zip
4.ls990.zip
PART 1 :first install the drivers then extract the tot from the zip then install the flash tool then take the megalock.dll and put it in the program file folder for the lg flash tool then launch the lg g tool in the place where is says select dll click the 3 dots ... then select the ls990.dll and in the place where it says s/w click add the tot file that you have extracted(ls990zv8.tot) then click board dl then click OK , after that click the yellow arrow then wait for the loading to finish.
now go to the phone and turn it off.
now hold the vol+ on the phone and connect the computer it should show downloading.
now right click on my computer and choose properties, now click device manager then click ports and select the lone that have lg in the name click properties then click port settings and click advanced then change port to COM41.
now it should start restoring on the software.
wait until its done.
if it fails after the download then its okay it should go to testing mode then hold the vol+ and power and tap normal boot.
if it dose not go to testing mode and just comes on,its OK.
END OF PART 1.
PART 2(THE UNLOCKING PROCESS)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
root your device using the link above Put all 3 the files on the device now
OK now install ls990recovery.apk and install click install recovery then click reboot to recovery
it should reboot to TWRP
now click wipe then factory reset then click advanced wipe and select system,cache (ONLY).
then swipe to reset.
now click the home button on the bottom and click install now
and now select the ls990.zip that you have downloaded and swipe to flash it AND WAIT UNTIL ITS DONE.DO NOT REBOOT.
CLICK HOME AND FLASH THE FIX FILE
now after you are done just click REBOOT and the phone should reboot.
CONGRATS!!!!!!!!!!
NOW YOU PHONE IS UNLOCKED
IF YOU WANT TO GO BACK TO SPRINT JUST DO STEP 1 AGAIN
NOW PLEASE CLICK THAT THANKS BUTTON AND PLEASE DONATE
paypal:[email protected]
AND DONT FORGET TO THUMBS UP AND THANKS
THANKS AND YOU WELCOME​
If you want to have 4g icon use buildprop editor and change r0.build.target_operator from GLOBAL to TMO for tmobile or ATT for att thanks to safetaga

---

Works with tmobile

---

T mobile usa works perfect
WORKS PERFECT ON T MOBILE USA THANK YOU THANK YOU
If you want to have 4g icon use buildprop editor and change r0.build.target_operator from GLOBAL to TMO

---

safetaga said:
WORKS PERFECT ON T MOBILE USA THANK YOU THANK YOU
If you want to have 4g icon use buildprop editor and change r0.build.target_operator from GLOBAL to TMO
Click to expand...
Click to collapse
Thanks for your donation and the 4G part I added it to my tutorial.

---

Uh oh..actually mine went to factory reset status (blue on screen with a red 2)?
What's the story with that?
---------- Post added at 05:50 PM ---------- Previous post was at 05:38 PM ----------
Got a blue screen with a red 2 in the middle.. What did I do that pissed it off?
No prob got that fixed on another forum..

---

fails during the flash 990.zip
error executing updater binary in zip sdcard/ls990.zip

---

wi11ie said:
Uh oh..actually mine went to factory reset status (blue on screen with a red 2)?
What's the story with that?
---------- Post added at 05:50 PM ---------- Previous post was at 05:38 PM ----------
Got a blue screen with a red 2 in the middle.. What did I do that pissed it off?
No prob got that fixed on another forum..
Click to expand...
Click to collapse
DO the flashing again and click (board dl) not upgrade dl

---

wi11ie said:
fails during the flash 990.zip
error executing updater binary in zip sdcard/ls990.zip
Click to expand...
Click to collapse
Yeah I know now flash the fix.zip

---

"System ui has stopped"... over and over...CRAP!
Hate this dang phone
Locked up... not working so well for me gentlemen..

---

wi11ie said:
"System ui has stopped"... over and over...CRAP!
Hate this dang phone
Locked up... not working so well for me gentlemen..
Click to expand...
Click to collapse
Look do the firmware and then the rom then the fix , look I have a store and I did this over and over for about 45 phones so yeah I'm pretty sure it works , follow the damn steps man.
And yes it works

---

Actually I found a minute difference in the file I downloaded.. it appears that during the transport process, it became corrupted..
And as this is about the hundredth phone that I have done it is a perfect process. The death of this was a corrupt file in transport..
So I agree with you it does work.. I just did all the steps and wiped system data and cache and installed Cloudy 2.5 for the G3..
Perfect!
Thanks for the help
wi11ie

---

wi11ie said:
actually i found a minute difference in the file i downloaded.. It appears that during the transport process, it became corrupted..
And as this is about the hundredth phone that i have done it is a perfect process. The death of this was a corrupt file in transport..
So i agree with you it does work.. I just did all the steps and wiped system data and cache and installed cloudy 2.5 for the g3..
Perfect!
Thanks for the help
wi11ie
Click to expand...
Click to collapse
i have a better rom in my files , cloudy is none very stock and have so many bugs in the network

---

Just off the topic, you can directly use cloudy rom without unlocking initially. cloudy rom is based on D855 GSM, so it is GSM unlocked.
I have got LS990. All I did is root, used autorec for LS990 from playstore to get TWRP, take current stock sprint rom back up(Just in case to revert), Boot into recovery and install Cloudy rom... Bam! you get GSM unlocked.

---

how to flash file
"CLICK HOME AND FLASH THE FIX FILE " I'm sorry . I'm newbie . I dont know how to do this . Can you take video ? tks

---

shining_sk said:
Just off the topic, you can directly use cloudy rom without unlocking initially. cloudy rom is based on D855 GSM, so it is GSM unlocked.
I have got LS990. All I did is root, used autorec for LS990 from playstore to get TWRP, take current stock sprint rom back up(Just in case to revert), Boot into recovery and install Cloudy rom... Bam! you get GSM unlocked.
Click to expand...
Click to collapse
@shining_sk good tip!

---

HEY
Can someone please tell me how to get my msl on my lg ls990 with cloudy g3 rom rooted i want my phone as cdma phone and i want to flash it to another carrier outside the us

---

monblink said:
Can someone please tell me how to get my msl on my lg ls990 with cloudy g3 rom rooted i want my phone as cdma phone and i want to flash it to another carrier outside the us
Click to expand...
Click to collapse
Not sure if I understand the question but if your running cloudy then your rooted and I am pretty sure unlocked. Also I believe the ls990 has options for both GSM and cdma.

---

Using this rom for about a week and everything works fine, but NFC is broken

---

InternetMayhem said:
Not sure if I understand the question but if your running cloudy then your rooted and I am pretty sure unlocked. Also I believe the ls990 has options for both GSM and cdma.
Click to expand...
Click to collapse
i need an msl/spc code in order to flash to another carrier CDMA

---

monblink said:
i need an msl/spc code in order to flash to another carrier CDMA
Click to expand...
Click to collapse
Cloudy is GSM (D855 based) rom. I guess you cannot use CDMA in any GSM roms.