Hello All,
Just thought I would pass this along in case there was anyone like me who regretted buying the white HAM2 due to it's slipperyness. I can't even begin to tell you how many times I almost dropped it due to it's slick surface and all the aftermarket covers I bought (5) made it just too big, so I bought an OEM back/battery case cover from the location below pretty cheaply.
http://www.parts4repair.com/back-cover-for-huawei-ascend-mate-2-mt2-black/
When I bought mine (black one) I saw in amazon reviews that the white and the black one were different in that the back covers were smooth vs textured, which tipped my decision for the black version. Also didn't want it to be confused for a sammy product also . Thanks for the link in case my cover ever gets damaged I know where to get it. :good:
Bill R said:
Hello All,
Just thought I would pass this along in case there was anyone like me who regretted buying the white HAM2 due to it's slipperyness. I can't even begin to tell you how many times I almost dropped it due to it's slick surface and all the aftermarket covers I bought (5) made it just too big, so I bought an OEM back/battery case cover from the location below pretty cheaply.
http://www.parts4repair.com/back-cover-for-huawei-ascend-mate-2-mt2-black/
Click to expand...
Click to collapse
Can you please take a picture of your HAM2? I want to see what a white HAM2 would look like with a black back. Or, if anyone else wants to mess around, a black HAM2 with a white back. Like the "white" Nexus 5.
ScoobSTi said:
Can you please take a picture of your HAM2? I want to see what a white HAM2 would look like with a black back. Or, if anyone else wants to mess around, a black HAM2 with a white back. Like the "white" Nexus 5.
Click to expand...
Click to collapse
I would but the front picture would just be white and the back picture would be black.
Bill R said:
I would but the front picture would just be white and the back picture would be black.
Click to expand...
Click to collapse
Why did I not think of that haha. Side picture possibly? The back edge is a bit curved. If it's not too much trouble.
Her you go. You actually can see the white side trick with the black back in the side on view. It may look a bit Frankensteinish, but what the heck, I like not dropping it.
I got one of the Xtremeguard clear back protectors. They always have 80-90% off so they can be had for cheap. Works to protect and is also grippy.
http://www.xtremeguard.com/Huawei-A...cend-mate-2-screen-protector.htm#.Ve2-8flVhBc
kimtyson said:
I got one of the Xtremeguard clear back protectors. They always have 80-90% off so they can be had for cheap. Works to protect and is also grippy.
http://www.xtremeguard.com/Huawei-A...cend-mate-2-screen-protector.htm#.Ve2-8flVhBc
Click to expand...
Click to collapse
Interesting! I wasn't even aware of those.
@ScoobSTi
Here is a black phone that I put a white face on for my kid. I think it actually looks good.
Davinci50 said:
@ScoobSTi
Here is a black phone that I put a white face on for my kid. I think it actually looks good.
Click to expand...
Click to collapse
Dunno why Huawei made the white cover slick compared to the black one. Noone likes slippery phones. Odd choice.
I'll help you!
If you need a correspondingly high quality mobile phone parts, known online store to select the job!
Related
Custom Battery Doors?
So we can all agree that the Developer Version of the G1 has a pretty sweet custom battery cover. Anybody know of anywhere making similar products?I expected to find a whole slew of decorated covers in all sorts of colors by now, but I searched Ebay and some online shops and no dice.
Re: Custom Battery Doors/Plastics on Dummy G1s
Have you considered picking up a dummy G1 (like they use in retail displays) cheaply on eBay? They may use the same casing parts - if anyone knows, please tell me?
I'm thinking about getting one of the dummies and respraying the plastics purple, then swapping the plastics with the ones on my G1 (using the instructions in the service manual that showed up on the interwebs).
thefoss said:
So we can all agree that the Developer Version of the G1 has a pretty sweet custom battery cover. Anybody know of anywhere making similar products?I expected to find a whole slew of decorated covers in all sorts of colors by now, but I searched Ebay and some online shops and no dice.
Click to expand...
Click to collapse
I stuck a decal on mine before 'skinning' it. Works
--M
demontefixo said:
I stuck a decal on mine before 'skinning' it. Works
--M
Click to expand...
Click to collapse
Can we see a picture? I almost did the same. Just haven't skinned the back yet.
daveknights said:
Can we see a picture? I almost did the same. Just haven't skinned the back yet.
Click to expand...
Click to collapse
Sure, I'll get around to a picture in a few days.
--M
I painted mine a while back. Sanded it down first, to get rid of the rubberized texture (for the paint to stick better).
http://androidcommunity.com/forums/95009-post58.html
and of course i cant see it without an account, lol
The Great NY said:
and of course i cant see it without an account, lol
Click to expand...
Click to collapse
Sorry man, didn't realize that. I'll repost them here in a sec.
Update: Here ya go man. While I was at it, I did the door on my burner. :-D
WHITE Back Cover?
I just found in ebay an oem white back cover for ,of course, the white g1.
Have any of you guys bought or tried this cover??
I think it would look nice having an all white g1..
Heres the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140296816157&ssPageName=ADME:X:AAQ:US:1123
blufabric said:
I just found in ebay an oem white back cover for ,of course, the white g1.
Have any of you guys bought or tried this cover??
I think it would look nice having an all white g1..
Heres the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140296816157&ssPageName=ADME:X:AAQ:US:1123
Click to expand...
Click to collapse
That battery cover is not white lol. It more like gold/silver/copperish?
I asked the seller and he told me that indeed it was white, but you never know its ebay
I think that may be the UK one.
Apparently when the G1 Pictures first came out the UK white G1 Variety had a white back cover.
I have the white G1 in the U.S. and It has a Silver/Greyish battery cover.
I have had the problem that the "Softtouch" has started to fade and there is a visible copperish color coming through. The inside of the cover is in fact white, so I guess you could clean a grey one off and use it as white.
T-mobile paid (Through account credit) the cost of 15 dollars plus S&H to replace mine from HTC. I ordered the Black one so I would not have this problem again. Now my Phone is white in front, with a grey stripe around it and a black back. Looks Storm Trooperish.
all white (except keyboard)
http://cnn.cn/shop/tmobile-white-housing-p-4199.html
falcon72 said:
all white (except keyboard)
http://cnn.cn/shop/tmobile-white-housing-p-4199.html
Click to expand...
Click to collapse
Is it even possible to replace all of that? If I can find one without the logo in all white I would definately want one, but wouldn't it be too difficult to replace all of it?
djind said:
Is it even possible to replace all of that? If I can find one without the logo in all white I would definately want one, but wouldn't it be too difficult to replace all of it?
Click to expand...
Click to collapse
yup, so possible in fact, that HTC wrote a manual on how to do it
http://forum.xda-developers.com/showthread.php?t=468673
ok, not a whole manual, but it's in there somewhere.
also it looks pretty fkin hard to do, i don't trust myself tbh =/
doesn't
it doesn't really look that difficult. just follow the directions. time consuming yes. i wouldn't do it unless i found one without the t-mobile logo, that would be a waste of time. if i could find one with no logo i'd be so happy. i hate advertising for free
i have a white UK G1 and the back is the same glossy white as the rest of the phone...
the white paint is holding up brilliantly as well and as i said is the same glossyness as the front... so white front, silver trim with a white back.
Brutal-Force said:
Apparently when the G1 Pictures first came out the UK white G1 Variety had a white back cover.
I have the white G1 in the U.S. and It has a Silver/Greyish battery cover.
I have had the problem that the "Softtouch" has started to fade and there is a visible copperish color coming through. The inside of the cover is in fact white, so I guess you could clean a grey one off and use it as white.
T-mobile paid (Through account credit) the cost of 15 dollars plus S&H to replace mine from HTC. I ordered the Black one so I would not have this problem again. Now my Phone is white in front, with a grey stripe around it and a black back. Looks Storm Trooperish.
Click to expand...
Click to collapse
I am having this same problem. I know a guy who has done the same as you but he didn't have to pay for the cover. He went in to T_Mobile and told them the problem and said he wanted a black back piece and they just gave him one. As for myself, I may just do the same.
I like the black back
I just paid up front for it, T-mob credited my account for it.
I like the black back, looks kind of Storm-Trooperish.
While a Glossy white one is most appealing to me, (I consider myself lucky to even have a white G1). I think it will be a while before white battery covers become available OEM, until then the grey back looks like its really dirty around the edges, so the white one gives the phone a more polished look.
External cover need
where can i buy a external cover? not comes with battery.. i ony need external cover (door) because mine broken. need a new one
Has anyone used these?
They're the only site I can find that allows you to make a custom decal, I want to make one with some of my favourite pictures all over it lol.
Just wondering if the decals actually cover the whole phone, leaving no visible black casing? And also is the tough anti scratch deal really as good as they say it is?
Thanks,
Steve.
yes i actually have it on my phone right now, no it doesnt cover the whole phone. Just the front and back. The sides are not covered. Hope this helps
tgorange said:
yes i actually have it on my phone right now, no it doesnt cover the whole phone. Just the front and back. The sides are not covered. Hope this helps
Click to expand...
Click to collapse
some pictures would help a lot more
tgorange said:
yes i actually have it on my phone right now, no it doesnt cover the whole phone. Just the front and back. The sides are not covered. Hope this helps
Click to expand...
Click to collapse
Any pics mate?
The more expensive one for $19.99 is the one i'm looking at. It's the scratch resistant ultra tough thing and judging by the designer that one does cover the sides:
http://www.uniqueskins.com/design.php?prod=920&opt=1648
But when I meant does it cover the whole phone I meant in size wise, for example is it a perfect fit or is the front decal slightly too small or too big etc.
you should look on ebay. they sell 3 skins for like $10 more or less, and theyre pretty good. they dont really offer any real protection because theyre more like decals/vinyls but what i do(and apparently the seller too) is i put the skin on, then over that i put a clear case. looks really good
they fit well also. the only thing i think you might not like is the part that goes on the back, it covers the back well, but just doesnt cover the corners. these arent super high tech skins. basic. but! the quality of the picture/design on the skin is amazing
roadrunnerx7 said:
you should look on ebay. they sell 3 skins for like $10 more or less, and theyre pretty good. they dont really offer any real protection because theyre more like decals/vinyls but what i do(and apparently the seller too) is i put the skin on, then over that i put a clear case. looks really good
they fit well also. the only thing i think you might not like is the part that goes on the back, it covers the back well, but just doesnt cover the corners. these arent super high tech skins. basic. but! the quality of the picture/design on the skin is amazing
Click to expand...
Click to collapse
I want a custom Decal of all my pics of me any my mates hence why using UniqueSkins.
Great
I just bought a custom scratch resistant skin from there and they are excellent in quality luckily I had found a coupon and paid only 15 dollars with shipping.
I have ordered mine, cost was $19.68 with 25% off coupon (am in the UK, selected the UPS shipping).
Once it arrives, I'll do a mini review and post a few coupons.
Does every part of the skin get colored or do parts remain transparent ?
For example if i make a simple logo will the skin be the logo on a colored background or the logo and the rest is clear ?
sry double.
KOF33 said:
Does every part of the skin get colored or do parts remain transparent ?
For example if i make a simple logo will the skin be the logo on a colored background or the logo and the rest is clear ?
Click to expand...
Click to collapse
I think anything not covered will be printed in white, I'm not 100% sure because I covered everything but if you add just 1 item and press preview anywhere you haven't covered is in white.
However I can confirm that anything you upload which is transparent, stays transparent. So you could make a solid black block to stretch across the skin then make the background of your image transparent.
Anyone know somewhere you can purchase JUST the pink chassis/s pen to swap onto a white note?
buy a pink digitizer/glass for $13 on ebay and a find a pink battery cover
If you don't wanna open your phone to swap the glass, then you can buy a pink screen protector and pink battery door. That would definitely be the easiest and cheapest way to go from white to pink.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
I've seen the pink s view cover in Verizon stores that will give you some pink and on Samsung site to get the pink s pen
Sent from my VZW Galaxy Note 3
if your thinking about changing glass here is some one trying it. http://www.youtube.com/watch?v=HwrSdrySqec
Here you go. Ain't cheap though, but its quick and easy:
http://www.ebay.com/itm/Samsung-Gal...reen-Digitizer-Bezel-Frame-Pink-/151161873855
Also, someone post a link to pink back door/ pink s pen please!
holycow1 said:
Here you go. Ain't cheap though, but its quick and easy:
http://www.ebay.com/itm/Samsung-Gal...reen-Digitizer-Bezel-Frame-Pink-/151161873855
Also, someone post a link to pink back door/ pink s pen please!
Click to expand...
Click to collapse
Your also getting a poopier screen though, lcd not amoled.
I agree with stanglifemike, get a pink screen protector (two birds one stone), pen, and back cover.
babyshanks said:
Your also getting a poopier screen though, lcd not amoled.
I agree with stanglifemike, get a pink screen protector (two birds one stone), pen, and back cover.
Click to expand...
Click to collapse
What? This is an OEM replacement... and therefore the same screen. Have you ever purchased a new screen on eBay? All sellers list it as "LCD" even when its Amoled...
holycow1 said:
What? This is an OEM replacement... and therefore the same screen. Have you ever purchased a new screen on eBay? All sellers list it as "LCD" even when its Amoled...
Click to expand...
Click to collapse
I have, hence why I'm very cautious when looking at the product descriptions. If it's not labeled correctly and doesn't state that it's oem I would be wary that it may just be a copycat. There are plenty of note 3 copies out there. If you've been successful getting an oem product than I'm glad for you, but I wouldn't recommend a item unless I knew for certain it was oem/meets requirements.
babyshanks said:
I have, hence why I'm very cautious when looking at the product descriptions. If it's not labeled correctly and doesn't state that it's oem I would be wary that it may just be a copycat. There are plenty of note 3 copies out there. If you've been successful getting an oem product than I'm glad for you, but I wouldn't recommend a item unless I knew for certain it was oem/meets requirements.
Click to expand...
Click to collapse
I agree on this, there are many seller who source the screen direct from china, looking at it is a 1:1 direct copy, but once connected, you see the quality of the actual screen, with that being said, there are some oem ones available, best to get a pink screen protector, cheap and better option, at least it doesn't void the warranty.
crimsonsin said:
Anyone know somewhere you can purchase JUST the pink chassis/s pen to swap onto a white note?
Click to expand...
Click to collapse
What about using just a skin? only 20$
http://www.icarbons.com/collections...ducts/samsung-galaxy-note-3-pink-carbon-fiber
petzku said:
What about using just a skin? only 20$
http://www.icarbons.com/collections...ducts/samsung-galaxy-note-3-pink-carbon-fiber
Click to expand...
Click to collapse
Actually I like the look of this better than anything else I've seen. (Really talking about the other options, not the pink one in particular) I wonder how well the sides adhere though. I'd imagine with the ridges they won't last long.
I've seen a video on changing a screen and digitizer on a s4. It's a nightmare job.
DustinKimble said:
Actually I like the look of this better than anything else I've seen. (Really talking about the other options, not the pink one in particular) I wonder how well the sides adhere though. I'd imagine with the ridges they won't last long.
Click to expand...
Click to collapse
I would also imagine that the sides won't stay on very long. I had a Ghost Armor full body for my Note 2, which came with the sides as well. The Note 2 has smooth sides, so I'd imagine they would stay put on it much better. I wasn't crazy about how the sides looked though, so I never used them. I did install them a couple days after I put on my screen protector an battery door skin, just to see how it would look. I was right when I originally thought I wouldn't like them. I left them in for a couple hours an then took them off. I think having chrome/silver edges on a phone looks good. So even if the sides didn't stick or stay put on the Note 3, I think it would be for the best anyway! Lol
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
So I wasn't too big of a fan of the Midnight Blue color, but it was the only color available from T-Mobile, so I went with it. I purchased a white back cover from ebay and this is how I swapped it out.
Link to back purchased:
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
First is the replacement cover itself. It comes with adhesive already applied and a blue cover to be removed before sticking on.
To take the cover off the Nexus 6 I used a dull razor blade, as it was the only thing I could find that wold fit between the back cover and the metal housing. I stuck it in the bottom corner because I thought it would make it easier to peel up. I also put a piece of electrical tape at the point where the razor would touch the metal housing to avoid chipping the metal.
WARNING!!!! There is a ribbon next to the power and volume buttons that will pull up with the cover when removing make sure to use your finger to hold it down as you pull on the cover. Take your time.
Peel off protective cover of new back and stick on . Pretty simple.
Finished.
I do like it wayyyy better than the midnight blue back color. The blue was too boring for me and I am actually liking the 3 tone with white,black and blue. However, once they release the housing I will replace with the housing shipped on the Cloud White model to get rid of the blue. Also remember cloud white is slightly off white so don't a bright white. And thanks to ifixit for the instructions for removing back cover.
And FYI, the white cover has the same texture as the blue. It is also a fingerprint magnet as well, but less visible in most lighting due to the color.
Nice, thanks for sharing. Pics r a little small but still helpful.
Sent from my Nexus 6 using Tapatalk
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
bigmike2424 said:
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
Click to expand...
Click to collapse
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
natezire71 said:
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
Click to expand...
Click to collapse
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Nice, thanks for the write up, especially the part about the ribbon cable. I ordered a new one on Dec 1 but the tracking hasn't updated since the 4th so who knows when I'll get it.
Edit - Looks like it showed up in Chicago today. Maybe tomorrow I'll have it.
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
This is why I got a new one. My new Nexus 6 from Sprint came with a few of those scuffs on the back almost like they used the phone as a hockey puck and slid it across the floor before packaging it or something. Nothing I have done has created anything like those scuffs so I am not sure what these phones went through during assembly. I knew the back covers would be cheap since there isn't even an NFC tag or anything attached to them.
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Pilz said:
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Click to expand...
Click to collapse
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
bigmike2424 said:
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
Click to expand...
Click to collapse
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Pilz said:
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Click to expand...
Click to collapse
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Thanks. That's good to know because I'm sure I will be replacing it at some point (I have no case and the back cover will surely get scratched up at the minimal contact point)
PaisanNYC said:
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Click to expand...
Click to collapse
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Pilz said:
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Click to expand...
Click to collapse
PlastiDip
Pliind said:
PlastiDip
Click to expand...
Click to collapse
Someone tried that with the dbrand skin and it started to flake after a couple of days.
Pliind said:
PlastiDip
Click to expand...
Click to collapse
I have to agree, PlastiDip doesn't work well for something being handled as much as a phone, even if you sandpaper the item for better adhesion before painting
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
radeonboy said:
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
Click to expand...
Click to collapse
Shipping from NJ only took 3 days to get to me in Texas.
Thanks for this. Just ordered one!
does anyone know if replacing the white back with one of these blue ones will void any kind of warranty?
Hey guys!
So I received my FlexiCase for the OnePlus 5 today! I can finally move away from my custom case.. (a oneplus 3 case with the camera slot cut out!) I am delighted to see that Orzly are one of the first big-name brands with their cases out! I had the FlexiCase for my OnePlus 3 last year and loved it, so purchased this one the moment I saw it up for pre-order on amazon.
Now lets get into the review!
One of the first things you see in the package when you open it is a letter from the companies co-founder, hoping that you like the product!
http://imgur.com/a/TpGJG
Now onto the packaging, its similar to other products. Dead front you can see through the clear piece of plastic a part of your case, and the rest of the white, orange and gray packaging is surrounding it. The back of it houses some information about Orzly, some social media handles and tells you how you can win some free prizes!
Taking the case out of the packaging, it is a flexible gel case, as the name implies. All the buttons are covered by the case, and the case has protruding areas, along with a gap between the volume up and down buttons to help you determine which is which!
Putting the phone into the case, all the ports, including the camera and alert slider line up perfectly as you can see in the images below! None of the microphones are covered, which is great seeing as I had read of a few companies had covered the one by the camera at the back! Speaker lines up perfectly, and there is ample room for your dash charge cable and headphone jack to fit in, without pushing up the case. The alert slider has a nice little touch, there is a little bit of a space behind it so that your thumb can fit in nicely, without having to struggle! It is actually very useful and you will be able to see it in the images where I compare it with the OnePlus3/3t FlexiCase. Around the back in the bottom right there is a small bit of Orzly branding, which isn't really too obtrusive and is very small.
http://imgur.com/a/wNlwp
There is a lip around the screen, which would be able to protect your device should you drop it and will help to protect you from scratches!
http://imgur.com/a/wEg9a
My opinions? This case is great for anybody who loves the thinness of the OnePlus 5. It sits nearly flush with the back, yet protects the camera. Even though it is thin, it protects the screen which is great! I personally got the clear one, but they do have other matte colours should you want them such as black, red and blue! A link to buy can be found here! (change .co.uk to .com or whatever depending on your location!)
If you have any questions about this case, feel free to ask below and I will reply!
Mine also arrived, pretty standard, good quality and it's nice to be able to see the phone!
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Mine also arrived today seems pretty good
Rebel7022 said:
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Click to expand...
Click to collapse
$100 on cases? Wow thats dedication! haha
nadejo said:
Mine also arrived today seems pretty good
Click to expand...
Click to collapse
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
nadejo said:
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
Click to expand...
Click to collapse
Ah yeah, this is the flexicase its a bit different. I used the orzly fusion bumper case mainly on my op3 last year, which would be an equivalent to that spigen i believe
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I have had the cases since early drop. I can tell you about the Karbon, red & black tpu, the ebony
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason
Click to expand...
Click to collapse
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
biglilsteve said:
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
Click to expand...
Click to collapse
Have to say the one case thats nearly clear which doesn't discolour (noticeably) is the Tech 21 variants, they have a mesh so it's no completely apparent.
But yea I learned long ago that clear cases are a no no, nicotine brown is not a good look.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
Click to expand...
Click to collapse
Aye it does go bad after a while, I had one years ago when i smoked and put two and two together, but it's just grime that it picks up, stick with smokey ones now or black.
Supposed they still get filthy but cant' see it as much.
Worst thing about it is they look amazing when you first get them
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well if your interested it think they also do solid colour version of the case.
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
nice one.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
They do but those aren't even shipping yet. When I ordered my black case on Amazon back on June 24th the listing said shipping would start on July 13th. I've already dropped my slippery OP5 once and have a small dent to show for it. I hope the case arrives while I still have something to protect with it.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Same here. I loved the concept of a clear case to show off a nice phone. First time using a clear case was the one that came with my OPx. Didn't take long for it to start turning that nicotine brownish yellow color. (my bad smoking habit didn't help much of course) Got a black spigen case after that and haven't looked back.
I'm waiting for spigen to come out with one for the OP5 and hopefully they do so quickly. I nearly had a heart attack when I dropped it onto the concrete while exiting my work van. (chevy 3500 so It fell from a pretty good distance) Landed screen first but luckily the gorilla glass 5 held up. Ive also got one of the official OP wooden cases which has so far saved the metal finish from some minor scrapes and dings here and there.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yep I never buy perfectly clear cases anymore, they always go off colour and look dirty. I've gone with the Otterbox for my OP5 this time around, that might change if I start feeling it's too bulky. BUT I love the knowledge and reassurance of the protection it offers over other slim/flexi cases.
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others I've seen. hoping this stays the same!
Click to expand...
Click to collapse
Yeah, transparent plastic anything can vary quite alot I find. Some transparent stuff I've had discolors really easy, others last absolutely years without losing a single thing and still cooking crystal clear. (others, varying degrees in between). Have you got any pics of your 3T FlexiCase to show me how they hold up over the test of time? If it's not that bad, then I do like the idea of having transparent cases, because the phone itself seems pretty nice, so is nice to be able to see it through the case, especially stiff like the logo, etc.. But if it's bad, then would probably just go for a colored version instead.
Looks like even the colored ones are finally available now (even just yesterday, all but the transparent one were all showing on pre-order, so looks like t's a safe bet deliverywise for any of the colors either way now)
www.amazon.co.uk/dp/B072QX9H9G but I would still be keen to get your opinion on this, as transparent would have been my first choice, however it's a very good point that alot of people have raised, so I want to be extra specially careful to hear from real people who have used them before knowing which color to get. Main thing is I want it to look nice!
Thanks.