Point me to the right place for root steps by step - Verizon Samsung Galaxy S 4

I'm on Build 1545VRUFNK4 and 4.4.2> tried towelroot but says device is not supported (tired 3 times). Aslo could not get Kingoroot to work.

Successfully rooted using Kingroot. Was thinking of playing it safe and installing CWM. Is there a recommended version? Also, how do I keep apps I'm deleting via RootAppDelete from immediately downloading and reinstalling. Somethng I need to disable?

How did you get KingRoot to work? The desktop version won't even open for me and the app has failed (although it does say no root available ) at least 30 times. I did have to flash the neutered OC1 file when I messed up trying to upgrade to OF1 so I guess its like taking an OTA, lost root.

Just followed the steps as prescribed.
I am unable to get a custom recovery set up. Every time I try and boot into recovery it goes into the "Downloading do not turn off target" mode and remains frozen. All steps to install TWRP and CWM are followed so not sure whats preventing either recovery from running . I have SCH-1545 with Android 4.4.2 and Build 1545vrufnk4. Can I even use TWRP or CWM or is Safestrap my only option?

I am running a SCH-1545 with Android 4.4.2 and Build 1545vrufnk4. Can I even use TWRP or CWM or is Safestrap my only option?

For you if you don't have the MDK bootloader then Safestrap is your only recovery.

OK, and how do I confirm the MDK bootloader?

It should say in your phone settings under about phone. I've always thought of it as if you didn't buy a S4 right when they came out, you probably don't have the MDK one. You never know though so I'd check first. If you bought the phone and it was NK4 then you don't have the MDK.

Cannot find MDK anywhere...also there are many versions of safestrap for J this and J that - how do i find that?

I believe you'll need Safestrap 3.75. You'll need Busybox out of the playstore to make it work.

Related

[Q] Currently on MI1 with a few Questions

Hi All,
I picked up an MI1 GS4 a month ago and after a few nights of scrolling through the forums I was able to get HD 10.2 loaded onto my phone via Safestrap. During the root process, I got a little bit a head of myself and flashed a custom recovery. After some research (and a presumed brick scare) I found that there is no way to get CWM recovery on the phone. While it's a major disappointment, it is what it is. So I have two questions:
So right now, my phone doesnt have a recovery and if I try to boot into it, it will go into Odin mode and give me some sort of an error. I assume I need to flash a new recovery through Odin, but am wondering if someone could point me in the direction of the correct file.
Is MJ7 the latest OTA from VZW? Should I wipe my device completely, go back to stock, and take the latest OTA? From what I am gathering, safestap is now working on MJ7, but I want to be sure that is what I will get to if I take the OTA. If I do want to take the OTA, how would I go about doing this and is the problem listed above an issue?
Thanks!
madtomatoes said:
Hi All,
I picked up an MI1 GS4 a month ago and after a few nights of scrolling through the forums I was able to get HD 10.2 loaded onto my phone via Safestrap. During the root process, I got a little bit a head of myself and flashed a custom recovery. After some research (and a presumed brick scare) I found that there is no way to get CWM recovery on the phone. While it's a major disappointment, it is what it is. So I have two questions:
So right now, my phone doesnt have a recovery and if I try to boot into it, it will go into Odin mode and give me some sort of an error. I assume I need to flash a new recovery through Odin, but am wondering if someone could point me in the direction of the correct file.
Is MJ7 the latest OTA from VZW? Should I wipe my device completely, go back to stock, and take the latest OTA? From what I am gathering, safestap is now working on MJ7, but I want to be sure that is what I will get to if I take the OTA. If I do want to take the OTA, how would I go about doing this and is the problem listed above an issue?
Thanks!
Click to expand...
Click to collapse
safestrap is a recovery of sorts, so what you are saying, you rooted, installed safestrap, installed HD10.2 than installed a recovery on top of that like CWM? So you soft bricked your phone?
Your only recourse is odin the full wipe stock image back and start over.
I suggest a thorough reading of the forum threads here first so you know better what to do.
I have a guide in the general forum here that lists steps to go from ME7 to MJ7 and root, install safestrap 3.65 and HD11....I'm not sure how it would play with your MI1 base phone so proceed at your own risk
decaturbob said:
safestrap is a recovery of sorts, so what you are saying, you rooted, installed safestrap, installed HD10.2 than installed a recovery on top of that like CWM? So you soft bricked your phone?
Click to expand...
Click to collapse
The other way around. I first rooted and attempted to install CWM. After that failed, I read further and discoved that only MDK roms are truly unlocked. From that point, I installed safestrap and HD. My phone is functional right now, I just have no way of getting into the stock recovery.
It's my understanding that I will need to use Odin to flash the stock MI1 image. I just want to confirm what happens from there. After flashing the stock image, I will be stock MI1, unrooted, with the opportunity to OTA to MJ7 (?). From that point, I'll take the OTA, re-root, reinstall safestrap, and finally HD11/12. Is all of this correct?
Thanks
madtomatoes said:
The other way around. I first rooted and attempted to install CWM. After that failed, I read further and discoved that only MDK roms are truly unlocked. From that point, I installed safestrap and HD. My phone is functional right now, I just have no way of getting into the stock recovery.
It's my understanding that I will need to use Odin to flash the stock MI1 image. I just want to confirm what happens from there. After flashing the stock image, I will be stock MI1, unrooted, with the opportunity to OTA to MJ7 (?). From that point, I'll take the OTA, re-root, reinstall safestrap, and finally HD11/12. Is all of this correct?
Thanks
Click to expand...
Click to collapse
that sounds about right. When you do HD12, be sure you have the safestrap version....

[Q] Can't boot into any recovery, phone still works

After looking through some of the threads, I think I have a slightly unique situation.
I got my S4 through swappa, and it was already on MK2. I rooted using motochopper and installed safe strap, and that worked (when booting, I could get into the options screen mess with stuff, etc). I didn't install any ROMS since there weren't any I was interested in besides cyanogenmod
In my attempt to install cyanogen mod, I tried installing another recovery, I think TWRP. That earned me the unlocked symbol when booting, and I was stuck in a weird boot loop for a while. I started researching flashing a clean ROM onto my phone, but lo and behold, it actually fixed it's own boot loop and started up again.
That was a month or two ago, before the NC5 4.4.2 update. I decided since it had resurrected itself I would just wait for a bit and see what other tools came out.
After the 4.4.2 update came out, I ignored it for a bit. I tried installing the OTA update once and it went through it's song and dance and after it rebooted it said it couldn't complete the update so nothing was changed. I assume that is because it's rooted? I didn't really force uninstall any apps, I just disabled them through the included app manager.
So where I'm at now is I'm still on MK2, I can't install the OTA update, everytime I reboot my phone I get the unlock symbol and it says "Recovery Booting..." in blue letters at the top, but it never boots into any sort of recovery.
I have tried installing safe strap again and the safe strap app says "State: Installed" but when I reboot it says that recovery booting thing, and then just boots into the regular phone. I don't see the safe strap logo or button options at all.
Where can I go from here? Ideally I'd like to get on a custom ROM that's on the rootgalaxys4 website (it won't let me post links) but I don't know if I have the MDK bootloader, or even what my recovery situation is.
If anyone could help shed some light on this, it would be much appreciated!
Install phone info from play store. ..If you have mk2...bootloader and firmware I have no idea how you got a cm base rom loaded....As for taking an OTA. ..you have to be 100% stock...no root..nothing frozen.
sent by bajarom v2.2 kitkat
decaturbob said:
Install phone info from play store. ..If you have mk2...bootloader and firmware I have no idea how you got a cm base rom loaded....As for taking an OTA. ..you have to be 100% stock...no root..nothing frozen.
sent by bajarom v2.2 kitkat
Click to expand...
Click to collapse
I actually don't have a CM base rom loaded, sorry if I made it sound like that. I am still on 4.3 stock w/ root. I wanted a CM ROM, and it seemed like I couldn't do it through safe strap so I tried to put TWRP recovery on there and I got boot-looped (which ended up fixing itself). Now I am trying to figure out how to get a recovery on there, and what my ROM options are (if I can get to 4.4.2 rooted, I would be happy).
I got the phone info program, is there any specific info you wanted off of there?
It says bootloader version I545VRUEMK2, baseband is same
apefist said:
I actually don't have a CM base rom loaded, sorry if I made it sound like that. I am still on 4.3 stock w/ root. I wanted a CM ROM, and it seemed like I couldn't do it through safe strap so I tried to put TWRP recovery on there and I got boot-looped (which ended up fixing itself). Now I am trying to figure out how to get a recovery on there, and what my ROM options are (if I can get to 4.4.2 rooted, I would be happy).
I got the phone info program, is there any specific info you wanted off of there?
It says bootloader version I545VRUEMK2, baseband is same
Click to expand...
Click to collapse
Your ONLY option for recovery is Safestrap. You can ONLY install Touchwiz based Roms.
There are a lot of threads in the General and Development sections you should check out before you go any further. I would link them for you, but I'm on my way out. Good luck.
riker147 said:
Your ONLY option for recovery is Safestrap. You can ONLY install Touchwiz based Roms.
There are a lot of threads in the General and Development sections you should check out before you go any further. I would link them for you, but I'm on my way out. Good luck.
Click to expand...
Click to collapse
OK, well then my current problem is even though I have the safestrap app installed, and the program reports safestrap recovery as being installed, I can't access it. There is no safe strap screen while booting or button options, and even if I do the forced boot into recovery (press power+vol up+home at the same time and hold until you see the "Recovery Booting" message) it just boots to the normal phone every time.
Also worth noting is for every boot, no matter how i start it, it says "Recovery booting" at the top, but never boots into recovery. I have tried uninstalling safe strap recovery through the safe strap app and re-installing but it is the same thing.
apefist said:
After looking through some of the threads, I think I have a slightly unique situation.
I got my S4 through swappa, and it was already on MK2. I rooted using motochopper and installed safe strap, and that worked (when booting, I could get into the options screen mess with stuff, etc). I didn't install any ROMS since there weren't any I was interested in besides cyanogenmod
In my attempt to install cyanogen mod, I tried installing another recovery, I think TWRP. That earned me the unlocked symbol when booting, and I was stuck in a weird boot loop for a while. I started researching flashing a clean ROM onto my phone, but lo and behold, it actually fixed it's own boot loop and started up again.
That was a month or two ago, before the NC5 4.4.2 update. I decided since it had resurrected itself I would just wait for a bit and see what other tools came out.
After the 4.4.2 update came out, I ignored it for a bit. I tried installing the OTA update once and it went through it's song and dance and after it rebooted it said it couldn't complete the update so nothing was changed. I assume that is because it's rooted? I didn't really force uninstall any apps, I just disabled them through the included app manager.
So where I'm at now is I'm still on MK2, I can't install the OTA update, everytime I reboot my phone I get the unlock symbol and it says "Recovery Booting..." in blue letters at the top, but it never boots into any sort of recovery.
I have tried installing safe strap again and the safe strap app says "State: Installed" but when I reboot it says that recovery booting thing, and then just boots into the regular phone. I don't see the safe strap logo or button options at all.
Where can I go from here? Ideally I'd like to get on a custom ROM that's on the rootgalaxys4 website (it won't let me post links) but I don't know if I have the MDK bootloader, or even what my recovery situation is.
If anyone could help shed some light on this, it would be much appreciated!
Click to expand...
Click to collapse
This is really hard to follow.
You can't root MK2 with motochopper, only MDK. Try installing the "Phone INFO *Samsung*" app from the app store to figure out what bootloader and baseband you actually have.
You can't install an OTA update if critical system files are modified, so you'll need to re-flash to a stock ROM to do that. But if it's really MDK, you do not want to allow any OTAs to upgrade your bootloader.
k1mu said:
This is really hard to follow.
You can't root MK2 with motochopper, only MDK. Try installing the "Phone INFO *Samsung*" app from the app store to figure out what bootloader and baseband you actually have.
You can't install an OTA update if critical system files are modified, so you'll need to re-flash to a stock ROM to do that. But if it's really MDK, you do not want to allow any OTAs to upgrade your bootloader.
Click to expand...
Click to collapse
Ah, ok, I did the root a while ago, so I think I mixed up which one I had used, I believe it was SafeRoot via this thread:
http://forum.xda-developers.com/showthread.php?t=2565758
Someone earlier suggested installing the phone info app above, so I checked it and it says I545VRUEMK2 for both bootloader and baseband.
The OTA update thing was just me trying to provide as much info as possible, I don't really want to do the OTA update because it seems like it removes root, and there is no good way to get it back on NC5.
At this point I would like to install some kind of rooted ROM, but I can't get into any sort of recovery. Safe Strap says it is installed but I can't boot into it.
Would the next step be to reflash a stock recovery? Is there some way to do that?
apefist said:
Ah, ok, I did the root a while ago, so I think I mixed up which one I had used, I believe it was SafeRoot via this thread:
http://forum.xda-developers.com/showthread.php?t=2565758
Someone earlier suggested installing the phone info app above, so I checked it and it says I545VRUEMK2 for both bootloader and baseband.
The OTA update thing was just me trying to provide as much info as possible, I don't really want to do the OTA update because it seems like it removes root, and there is no good way to get it back on NC5.
At this point I would like to install some kind of rooted ROM, but I can't get into any sort of recovery. Safe Strap says it is installed but I can't boot into it.
Would the next step be to reflash a stock recovery? Is there some way to do that?
Click to expand...
Click to collapse
Installing safestrap is a 2 step process. Did u do both steps?
sent by bajarom v2.2 kitkat
decaturbob said:
Installing safestrap is a 2 step process. Did u do both steps?
sent by bajarom v2.2 kitkat
Click to expand...
Click to collapse
If the two steps are:
1: Install the safestrap app (v3.71)
2: Go into the app and install the recovery.
In the app the recovery is listed as "Installed"
apefist said:
If the two steps are:
1: Install the safestrap app (v3.71)
2: Go into the app and install the recovery.
In the app the recovery is listed as "Installed"
Click to expand...
Click to collapse
ok buddy you want to upgrade i take it?
click on the thread in my signature and download the 1st file listed called the COMPLETE PACKAGE it has everything you need.
you'll start tho by reflashing MK2 system through Odin then rerooting via Saferoot then reinstall Safestrap. Then the 4.4.2 ROM you want to use then reboot to Odin/Download mode and flash any of my NC2/NC5 1 File Upgrade packages. This is the easiest and most simplistic way to help you get to where you want to go. This will also keep your bootloaders at MK2 and your KNOX intact at 0x0! THE COMPLETE PACKAGE has all the modules, safestrap, supersu ect then if you have any questions the guys or me in the thread will help u. altho if you really do have CM running on your phone take screenshots I've tried porting to work with 4.3 and altho i can get two AOSP roms working I've never gotten close with CM it needs a custom kernel which is something we cannot use with our locked bootloader. only AOSP/GE Roms that will work for 4.4.2 or 4.3 are ones that are compatible with the stock 4.3 or 4.4.2 kernels theres a thread in the development section for that subject as well.

Refurbished S4 w 4.4.2 not activated yet

Just bought a refurbished Galaxy S4 as my other phone was stolen. I am on Verizon. My S4 looks brand new and it's running 4.4.2! I would love to root and then probably flash to cm12. How would I root right now? The s4 has been out for some time and maybe the threads are old. Do I root before activating?
Build kot49h.i545vrufnc5
Please help. I have been without root on another phone for over a year. You can imagine my pain.
NO CM12. Nc5 does not have an unlocked bootloader.
As far as rootz towelroot still works. 1 click apk by geohot.
nc5
Tried the towelroot apk and it does not root, work. i get this message
"Only the Galaxy S4 active is currently supported. If you see this error and you think you have the right phone, email geohot at... i know i have an S4 but cant tell if it is an s4 Active. i just left verizon with an activated phone and it is already trying to push an update. I dont know if i should or what to do.
bbiigg said:
Tried the towelroot apk and it does not root, work. i get this message
"Only the Galaxy S4 active is currently supported. If you see this error and you think you have the right phone, email geohot at... i know i have an S4 but cant tell if it is an s4 Active. i just left verizon with an activated phone and it is already trying to push an update. I dont know if i should or what to do.
Click to expand...
Click to collapse
Make sure you are on nc5. Screenshot your settings if you want.
Next, make sure you got it from the real site... That doesn't sound like the right one.
If you have physical menu and back buttons, that's the s4 active. It's ATT only, in which case, this is the wrong device.
NC5
I just gave it a go again after rebooting and it worked. I have root. Now I need to figure out how to remove all this bloated crap. Any ideas. Wish I could flash a custom though. I'm still getting this annoying update window.
bbiigg said:
I just gave it a go again after rebooting and it worked. I have root. Now I need to figure out how to remove all this bloated crap. Any ideas. Wish I could flash a custom though. I'm still getting this annoying update window.
Click to expand...
Click to collapse
There are some debloater scripts on general forum, but I think the best choise to debloat is installing some file explorer (E.G. MiXplorer) and go to /system/app and /system/priv-app and delete everything you don't want. If you don't know what apps to delete This guide it's great
Btw, if you want a rom you can choose any 4.4.2 or newer, don't try any lower android version rom. To install custom roms on this device you can use Flashfire or Safestrap(only for kitkat or lower), I suggest you to use safestrap if you're on kitkat (keep in mind that rom slots doesn't work, you have to flash in stock slot any rom).
oops
I had a rom Hyperdrive installed and it was running well for a minute but I just had to try another rom "Galaxy S6 Port by Albe95"! Now i can make calls and recieve texts but not send them. i have no internet unless its wifi. Im not rooted and Towelroot wont work. No recovery available now and my Android Version is 5.0.2. Im really stuck and nervous. I need my phone for work. Any ideas?
bbiigg said:
I had a rom Hyperdrive installed and it was running well for a minute but I just had to try another rom "Galaxy S6 Port by Albe95"! Now i can make calls and recieve texts but not send them. i have no internet unless its wifi. Im not rooted and Towelroot wont work. No recovery available now and my Android Version is 5.0.2. Im really stuck and nervous. I need my phone for work. Any ideas?
Click to expand...
Click to collapse
No worries. I think you have to flash the OC1 modems for lollipop roms to work when coming from kk. Check your bootloader version, if it is a NC[place number here] you can odin back to the right update and use the flashfire or safestrap to use the installation instructions in the second post of the ROM forum. Your other option is to stay and flash modems. This is how to do it:
If you lost your recovery:
1)Get root (NOTE: you don't need to do the kernel flashing part because you are already on of1
http://forum.xda-developers.com/galaxy-s4-verizon/general/root-of1-t3249971
http://forum.xda-developers.com/galaxy-s4-verizon/general/samsung-s4-i545-verizon-of1-root-t3254434
2)Get Flashfire
3)Flash this (fist link) if it fails to solve the problem this
If this doesn't solve your problem and you can't go back to kitkat, you should odin OC1 and root. All credit goes to their respective contributors. Hope I helped
S4 flashing
whowatchlist said:
No worries. I think you have to flash the OC1 modems for lollipop roms to work when coming from kk. Check your bootloader version, if it is a NC[place number here] you can odin back to the right update and use the flashfire or safestrap to use the installation instructions in the second post of the ROM forum. Your other option is to stay and flash modems. This is how to do it:
If you lost your recovery:
1)Get root (NOTE: you don't need to do the kernel flashing part because you are already on of1
http://forum.xda-developers.com/galaxy-s4-verizon/general/root-of1-t3249971
http://forum.xda-developers.com/galaxy-s4-verizon/general/samsung-s4-i545-verizon-of1-root-t3254434
2)Get Flashfire
3)Flash this (fist link) if it fails to solve the problem this
If this doesn't solve your problem and you can't go back to kitkat, you should odin OC1 and root. All credit goes to their respective contributors. Hope I helped
Click to expand...
Click to collapse
I tried the 2nd option of rooting and it didn't work. I'm still on oc1. How would I Odin back or what files would I use? It's getting confusing.

[Q] Easiest Path - Upgrade MK2 to OF1 ?

Hello Everyone,
I'm a first time poster but have been reading this site for weeks trying to find the answer to my questions. I've acquired a good bit of info but still wanted to clarify some things before I take the plunge.
I'm currently using a Verizon GS4 (I-545) running rooted stock MK2 jellybean. I rooted ~2 years ago to get rid of the bloatware and just never bothered upgrading/keeping up with the firmware updates. There are some new apps that won't work on my phone, but are working on my wife's stock GS4 on OF1. I'd like to upgrade my firmware (and keep root) so that I don't have to keep stealing her phone.
I've come across several threads discussing upgrading from one baseband to the next - none quite match my scenario. Most threads talk about how to upgrade and keep root but now that I'm late to the party, it seems like root methods have been discovered for all stock firmware versions (even OF1 by flashing OC1 kernel, rooting, and flashing back to OF1 kernel). So with this in mind, can I just skip all the complicated stuff and just use Odin to flash OF1 and then follow Edgardo_Uchicha's OF1 root method?
If I can use Odin to flash OF1, will the file I load in the "AP" slot also includes the proper modules, bootloaders, etc. to upgrade everything to OF1? Will it do a factory reset/wipe or will I keep all my data like an OTA? As for getting the Odin file, it looks like I should just use the Samsung site to get it directly?
If I can use the Odin method, are there any drawbacks? If I don't like lollipop I realize I'm stuck and can't go back, but is there anyway to upgrade and be able to go back (downgrade)?
Thanks again for your help!
Mike
Hello Mike,
You can flash OF1 and root via the method others and I posted, some people wrote that other rooting software/apps are starting to work on lollipop builds, I haven't tested yet(since my device have a custom rom and it's rooted) but soon I will and will update the thread. Btw, my suggestion to you is flashing this specific odin package:
[Odin][TAR] I545VRUGOF1 neutered (No BL)
I was on kitkat bootloader, flashed this OF1 build and went back to kitkat without problems
Good luck!
Edgardo_Uchiha said:
Hello Mike,
You can flash OF1 and root via the method others and I posted, some people wrote that other rooting software/apps are starting to work on lollipop builds, I haven't tested yet(since my device have a custom rom and it's rooted) but soon I will and will update the thread. Btw, my suggestion to you is flashing this specific odin package:
[Odin][TAR] I545VRUGOF1 neutered (No BL)
I was on kitkat bootloader, flashed this OF1 build and went back to kitkat without problems
Good luck!
Click to expand...
Click to collapse
So I followed the thread you linked and it looked like my phone upgraded OK. However, even at lock screen I get the message "Unfortunately, the process com.android.phone has stopped". It reappears as soon as I dismiss it...basically making my phone useless. I was able to navigate to the Settings page though and it says I'm on 5.0.1 but under baseband it says "Unknown" rather than OF1. It does show OF1 under the build number though. I'm guessing it didn't like the MK2 bootloader?
Any ideas how to fix? Help!!
mike2914 said:
So I followed the thread you linked and it looked like my phone upgraded OK. However, even at lock screen I get the message "Unfortunately, the process com.android.phone has stopped". It reappears as soon as I dismiss it...basically making my phone useless. I was able to navigate to the Settings page though and it says I'm on 5.0.1 but under baseband it says "Unknown" rather than OF1. It does show OF1 under the build number though. I'm guessing it didn't like the MK2 bootloader?
Any ideas how to fix? Help!!
Click to expand...
Click to collapse
Try wiping via recovery, if I'm not wrong this package does not wipe your phone so maybe there are some leftovers that are messing up the new system
You are correct, the OF1 Odin file you recommended did not wipe my data/apps. You were also correct in that doing a factory reset/wipe fixed the issue. I had some apps that were previously "frozen/disabled" while I had root so I have a feeling that didn't help things when it got updated.
Is there any way to confirm that I still have the MK2 bootloader?
mike2914 said:
You are correct, the OF1 Odin file you recommended did not wipe my data/apps. You were also correct in that doing a factory reset/wipe fixed the issue. I had some apps that were previously "frozen/disabled" while I had root so I have a feeling that didn't help things when it got updated.
Is there any way to confirm that I still have the MK2 bootloader?
Click to expand...
Click to collapse
Download and install terminal emulator, the run these commands:
1. su
2. getprop ro.bootloader
Awesome! I was able to confirm I'm still using the MK2 bootloader. Thanks for all your help!

Update, reroot, etc.??

I really did not know what to title this, here goes:
I have a Verizon SGS 4 (SCH-I545), running stock 4.4.2, no custom recovery (am currently running the stock recovery B.S.), bootloader I545VRUFNK4, build ID KOT49H.I545VRUFNK4, release date 4/26/13 & have been rooted with KingRoot V. 4.8.0135 and is unlocked (haven't really any idea what that means, upon boot-up it shows an unlocked lock icon and says CUSTOM, the dealer I bought it from, just a shop where they buy & sell new/used phones, said that it is unlocked for use on any carrier I want.)
Now I don't know how important, if at all, all of that is but I want to update to the most up-to-date OS, reroot & maybe start flashing new custom roms.
The problem is I don't have access to a computer without install restrictions, meaning I can download things but I can't install them without admin name & password trying it directly from the settings (Settings/More/Software update) it keeps saying service unavailable...
I'm lost, is there any way to update via stock recovery or install a custom recovery (TWRP/CWM) via stock recovery or a root app?
I would suggest you to upgrade your phone with a custom rom, elseway if you do it with any official update your bootloader will be upgraded and there are a lot of cons with that.
We cannot have TWRP, CWM or other recovery (thanks to the bootloader), so the best you can do it's getting SafeStrap and then flash any of these custom roms:
stang5litre Ediition 5.0
Albe95 S6 FULL PORT 4.7
Albe95 ASTRA v2 Note 5 PORT
(I listed those because you want to update your phone). You can find SafeStrap and the roms in Verizon Samsung Galaxy S 4 Android Development sub-forum
SafeStrap must not be compatible with my phone cause I tried to use it multiple times but it is not installing any recovery, I'm still stuck on stock recovery.
AlphaTekk said:
SafeStrap must not be compatible with my phone cause I tried to use it multiple times but it is not installing any recovery, I'm still stuck on stock recovery.
Click to expand...
Click to collapse
I'm in the same bootloader so you should be able to install it, you just need SuperSU as your superuser app and busybox
Busybox, ya, I have it and ran it but KingRoot installed it's own supersu thing and it won't let me switch, if there'sa way to switch to supersu from the Play store, how?
The recovery is being overwritten by a script in the system. The title of the file is..
Install.recovery.sh
Rename this file with adding ".bak" then reinstall safestrap
Sent from my SCH-I545 using Tapatalk
I searched Root Explorer but have no idea where this is found, maybe you could point me in the right direction.
Ok, my phone's settings say I545VRUFNK1 for baseband but the build number says KOT49H.I545VRUFNK4 and Samsung Smart Switch comes up with FNK4 (VZW)! It is a Verizon SCH-I545 but how can I update it without Smart Switch cause it keeps saying its up to date?
Can I use Odin and what recovery would I use with Odin?

Categories

Resources