Hi peeps, I have a Bq Aquaris E 10 tablet and everything went well until I tried to install a custom recovery with Flashfy. The installation went ok but when I reeboted the tablet to enter it.... I could never enter the system again (I just have stock recovery and boot logo). I am now installing android sdk tools, but I can not finf drievers and the only thing that I can do is enter recovery thrn adb mode where it says ad sideload <filename> only if I could find a signed recovery/system to install it with the stock recovery... I think that no one in this city could repair this... So I am asking fot help.
Related
All knowing and magical XDA DEVS....
My phone is in bootloop and ADB commands are not recognized.
The screen is going white and blurry, when I try to enter recovery mode, it doesn't work.
If I don't have access to recovery... I need to get the device to be recognized by ADB...
The computer makes the sound of USB connect when it reboots... so I have some hope...
but I don't know what to do if the device does not respond to ADB commands.
I installed the Project Doge Zip. Wiped Cache after install as instructed.
When I downloaded the ROM, it said it was compatible with Mediatek 65xxx chipsets... I guess not? :crying:
Device: Blu Studio 5.5
Rooted: Yes
ROM Installed before bootloop: Project Doge 1.4
Recovery: CWM-based
Backup of stock OS: Yes
ADB: device not found
I have not bricked any other device and I'm not about to start now. Any help is very much appreciated.
THANK YOU!
I was upgrading the current Stock rom on my ZTE Nubia Z5s Mini, I went through the recovery mode to load the new rom and got a message saying that the rom installed correctly, I rebooted the device and now its stuck at the MIUI logo or if I try to load the recovery mode I get the Nubia logo just to load back to the miui logo again. I got the rom from the MIUI site its v5.
I've left the phone for over an hour hoping it was just loading up but no change, the phone heats up and even has a charger screen when plugged in.
Anyway to get back into the recovery mode to load the original rom again or any other way of fixing this? help :crying:
I've no idea how to help you with this but I'm bumping the thread because I know how you feel.
Sent from my HUAWEI Y536A1
I'm trying to flush the rom by using adb but with an issue, even thou my device is recognized as Nubia Z5s Mini in device manager it still gives a driver error "these have been installed" and in cmd adb it does not see the device.
Update : Got drivers for install from Clockwordmod website but it will only accept the drivers if I set the phone as a modem in device manager when installing them, still not recognized by adb using CMD.
Solved driver issue and qusb_download issue, ADB drivers are done through all drives in device manager pointing to the Google USB drivers and select adb interface then run CMD from within the Google SDK program folder in platform-tools to read the device.
Now using emmc but need to generate EMMCBLD.HEX & 7x30_msimage.mbn if anyone can help, I can enter adb using recovery mode but blocked from making changes in fastboot mode, currently in download mode which can see a drive H but need the two files to proceed any further.
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?
Hi all,
I'm new here so idk if this is the right or the wrong section for my problem, but I need help like I never did xD
So I have Doogee X6 phone it's mt6580 android 5.1 , few days ago I decided to root it and I done it with Kingoroot app and it succeed. Today, I tried to install custon recovery so I head to Needrom and download twrp img from there and tried to install it with ADB FASTBOOT FILES WINDOWS like in this XDA tutorial
https://www.xda-developers.com/how-to-install-twrp/
I followed the steps then I ran to the problem where I had to unlock boatloader with "fastboot oem unlock" next I install the recovery img using "fastboot flash recovery twrp-2.8.x.x-xxx.img", after that the phone started to reboot and try to enter twrp with some failure lines like:
updating patrition details
'full selinx support is ..
failed to find /data invalid argument
... done'
I tried to boot into Factory mode or pressing all the buttons but didn't work the reboot process is quite fast :'(
So what should I do now ? did I brick my phone or can it be repaired again ?
I apreciate it if someone can help me with my problem
Thank you
Hey guys! The last day I wast trying to Install a custom recovery (twrp) to my Tablet Polaroid pmid7102dc, and I didn't found the TWRP for my model so I downloaded twrp-3.2.1-0-twrp.img. I used the adb program to Install it and after that, I triyed to reboot my Tablet I only got the surprise that my tablet was HardBricked. It stays in the POLAROID screen with a message "orange State Your devices has been unlocked and can't be trusted. Your device will boot in 5 seconds" after that the tablet reboot but didn't enter. Actaully I can not enter to the recovery mode and my pc will not recognice it when I connect it.
What can I do?
Help :c