Hey there,
i have a really strange problem with my Asus Zenfone 5. I flashed a Cyanogenmod 12.1 and it work perfectly, but when i try to enter in bootloader by pressing volume up+power doesn't happen nothin, only boot normally OS. So i tried to enter via ADB with command "adb reboot bootloader" but what happens is just an usb logo. Maybe i bricked the bootloader?
Thanks before, im in yours hands
Lollolz7 said:
Hey there,
i have a really strange problem with my Asus Zenfone 5. I flashed a Cyanogenmod 12.1 and it work perfectly, but when i try to enter in bootloader by pressing volume up+power doesn't happen nothin, only boot normally OS. So i tried to enter via ADB with command "adb reboot bootloader" but what happens is just an usb logo. Maybe i bricked the bootloader?
Thanks before, im in yours hands
Click to expand...
Click to collapse
Related
I just officialy unlocked my bootloader because I Can't enter EDL mode somehow. Tried everything, EDL scripts, adb, holding the volume buttons...
The phone always restart the the system (it works fine). This is weird because I can't do factory reset either, it always boots back into my system.
Can somebody help me in this?
If you have an unlocked bootloader, why do you need to go to EDL mode instead just use fastboot.
Care to explain better?
The issue is: I flashed TWRP with fastboot. When I try to boot into it (Holding Volume up + power) i just get back into system.
This is just weird, as I can't do a Factory Reset either!
Download edl7.zip file from xda thread and go into fastboot mode and double tap on cmd file...your device will go in edl mode (red led blink)
Zerei said:
Care to explain better?
The issue is: I flashed TWRP with fastboot. When I try to boot into it (Holding Volume up + power) i just get back into system.
This is just weird, as I can't do a Factory Reset either!
Click to expand...
Click to collapse
EDL is for flashing fastboot files for locked bootloader as flashing through fastboot doesn't work. If your bootloader is unlocked you can just use fastboot. For TWRP are you getting any error while flashing it, if not you should boot into TWRP by holding volume down and power button with your phone turned off.
harishmenace said:
EDL is for flashing fastboot files for locked bootloader as flashing through fastboot doesn't work. If your bootloader is unlocked you can just use fastboot. For TWRP are you getting any error while flashing it, if not you should boot into TWRP by holding volume down and power button with your phone turned off.
Click to expand...
Click to collapse
Hey man. Thank you for your help. But I think that I'm not being clear on what my issue is. I have some experience on flashing twrp and rooting. But never faced something like this before.
I can't even do a factory reset (from the settings menu) as the phone restarts and just goes back to the system. I flashed twrp but when I try to boot into it I get back to the system. I try to reboot into bootloader via the update menu and the phone resets and just get back to system.
It's just as if I can't acess the bootloader menu at all.
That never happened, try holding volume button before pressing power button. You can also try it through adb, make sure you have usb debugging turned on. For fastboot use adb reboot bootloader and for recovery adb reboot recovery
harishmenace said:
That never happened, try holding volume button before pressing power button. You can also try it through adb, make sure you have usb debugging turned on. For fastboot use adb reboot bootloader and for recovery adb reboot recovery
Click to expand...
Click to collapse
Yeah, tried that too. This is just way too weird to be normal. I'm sure that I did everything right.
Hello,
i have just flashed the cm13 rom but I stuck in a "Just a sec..." window during the first registration. Now I wanted to reflash the rom but i can not enter the recovery. If i hold volume up and power it just stuck at the mi logo. At least i can enter fastboot. Is there anything i can do?
Before it was possible to enter recovery via adb.
What should i do?
domina said:
Hello,
i have just flashed the cm13 rom but I stuck in a "Just a sec..." window during the first registration. Now I wanted to reflash the rom but i can not enter the recovery. If i hold volume up and power it just stuck at the mi logo. At least i can enter fastboot. Is there anything i can do?
Before it was possible to enter recovery via adb.
What should i do?
Click to expand...
Click to collapse
Perfectly matched with my case.
I'm entering Recovery mode by reinstall the TWRP under fastboot.
Could you try the process of installing your Custom Recovery under fastboot?
domina said:
Hello,
i have just flashed the cm13 rom but I stuck in a "Just a sec..." window during the first registration. Now I wanted to reflash the rom but i can not enter the recovery. If i hold volume up and power it just stuck at the mi logo. At least i can enter fastboot. Is there anything i can do?
Before it was possible to enter recovery via adb.
What should i do?
Click to expand...
Click to collapse
padiyes said:
Perfectly matched with my case.
I'm entering Recovery mode by reinstall the TWRP under fastboot.
Could you try the process of installing your Custom Recovery under fastboot?
Click to expand...
Click to collapse
if you are in cm then you have to press volume up and volume down+ power button untill it takes you to twrp recovery.hope you get what i mean
Volume down button is broken so I can't enter recovery. I used 'adb reboot recovery' to enter the recovery initially, then I flashed TWRP and installed Lineage from there. Now that it's stuck on the boot loop and I've tried pressing the power+down button to enter recovery but it obviously doesn't work (the button is physically broken). I can't 'adb reboot recovery' because it's still on the boot phase and isn't recognized by adb. Is there any other way to get into recovery or am I ****ed?
rafmal000 said:
Volume down button is broken so I can't enter recovery. I used 'adb reboot recovery' to enter the recovery initially, then I flashed TWRP and installed Lineage from there. Now that it's stuck on the boot loop and I've tried pressing the power+down button to enter recovery but it obviously doesn't work (the button is physically broken). I can't 'adb reboot recovery' because it's still on the boot phase and isn't recognized by adb. Is there any other way to get into recovery or am I ****ed?
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3513299
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
power off the phone, put USB port in phone, press volume down key, now connect USB port to PC with volume down key press. it should boot to fastboot.
Rob1hn said:
Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
Click to expand...
Click to collapse
Try this command
Code:
adb reboot fastboot
miststudent2011 said:
Try this command
Code:
adb reboot fastboot
Click to expand...
Click to collapse
hi. Please, help, i cant reboot to fsstboot. If i do this from app or from adb my phone just reboots twice. I can boot into recovery and into download mode
Don't reboot into fastboot, boot into fastboot.
1st hold the up and down and power to start up so that it shows more than that "...is now booting". Then power off and press "down" and "power" with USB plugged to enter fastbboot. In fastbbot, flash the userdata.img and the cache.img (This cleans data and cache totally) from Huawei's updates, then you will be able to get into TWRP without being stucked.
please need help very urgently. i was trying to install a custom rom in my phone today. unlocking bootloader was successful, installing twrp was successful too and i was very happy. when i tried to boot into the recovery it turned off and never booted. tried restarting (volume up+power button), pressing the power button but nothing happens. it's still in the "off" state. please don't think it is a bootloop. the phone doesn't turn on and i can't see the logo. seems like it is permanently turned off
DeathStriker88 said:
please need help very urgently. i was trying to install a custom rom in my phone today. unlocking bootloader was successful, installing twrp was successful too and i was very happy. when i tried to boot into the recovery it turned off and never booted. tried restarting (volume up+power button), pressing the power button but nothing happens. it's still in the "off" state. please don't think it is a bootloop. the phone doesn't turn on and i can't see the logo. seems like it is permanently turned off
Click to expand...
Click to collapse
Idk but charge ur phone for a min..then unplug ur battery reconnect it then volume down+power
DeathStriker88 said:
please need help very urgently. i was trying to install a custom rom in my phone today. unlocking bootloader was successful, installing twrp was successful too and i was very happy. when i tried to boot into the recovery it turned off and never booted. tried restarting (volume up+power button), pressing the power button but nothing happens. it's still in the "off" state. please don't think it is a bootloop. the phone doesn't turn on and i can't see the logo. seems like it is permanently turned off
Click to expand...
Click to collapse
Sometimes it is that the screen is blank but TWRP is there though, when you are presumably in TWRP, connect your device to the PC and try with ADB commands to see what happens, let us know.
Danish on XDA said:
Idk but charge ur phone for a min..then unplug ur battery reconnect it then volume down+power
Click to expand...
Click to collapse
charged for about an hour. now unplugged stil doesn't turn on
SubwayChamp said:
Sometimes it is that the screen is blank but TWRP is there though, when you are presumably in TWRP, connect your device to the PC and try with ADB commands to see what happens, let us know.
Click to expand...
Click to collapse
okay, so tried and when typing "adb devices" laptop don't detect my phone, says nothing is connected. same with "fastboot device" command nothing is being shown. although twrp is still there installed but it doesn't turn on neither other devices can dtect my phone now
DeathStriker88 said:
okay, so tried and when typing "adb devices" laptop don't detect my phone, says nothing is connected. same with "fastboot device" command nothing is being shown. although twrp is still there installed but it doesn't turn on neither other devices can dtect my phone now
Click to expand...
Click to collapse
Not this way, press the buttons to supposedly enter to TWRP, do all of them blindly. Start with pressing the three buttons simultaneously for about 12 seconds (this will power off your device) then immediately press the volume up + PWR button for about 7 seconds (to enter to TWRP), then type the commands.
Pay attention if something is displayed in your screen and if you hear some sound when connecting to PC.