Best XDA-Devs,
I think I may have done something REALLY stupid.
Today I possibly hard bricked my phone.
How? You may ask.
Well, I was looking into installing a custom recovery and found out I had to unlock the bootloader first. So I googled how to unlock the bootloader and found a XDA thread about it.
I followed the steps and tried to install the aboot.img file attached to the thread.
I opened up CMD and began replacing the stock aboot file with my aboot4.img file (I renamed the attached aboot.img to aboot4.img because I thought this was necessary).
I then rebooted my phone and BOOM nothing works now.
I can't turn on the phone, I can't get the phone into recovery and I can't even get the phone into download mode.
If someone knows how to fix this (if it's possible at all), please post it.
If you need any more information just ask.
Regards,
Thomas.
Does lg mobile support tool need download mode?
Sent from my LG-D722 using XDA Free mobile app
jossan said:
Does lg mobile support tool need download mode?
Sent from my LG-D722 using XDA Free mobile app
Click to expand...
Click to collapse
If I correctly read the other threads about this, yes.
Regards,
Thomas
Is the phone not doing anything when you press the power button?
Sent from my LG-D722 using XDA Free mobile app
jossan said:
Is the phone not doing anything when you press the power button?
Sent from my LG-D722 using XDA Free mobile app
Click to expand...
Click to collapse
Yes it seems completely dead.
Regards,
Thomas.
ny reaction when plugging the charge cable in? If yes, could maybe be fixed, if no... You're ****ed
Sent from my LG-D722 using XDA Free mobile app
jossan said:
ny reaction when plugging the charge cable in? If yes, could maybe be fixed, if no... You're ****ed
Sent from my LG-D722 using XDA Free mobile app
Click to expand...
Click to collapse
I guess I'm ****ed then.
Does someone else know a solution?
Regards,
Thomas.
Check post #1 & #2 of this:
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Vagelis1608 said:
Check post #1 & #2 of this:
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Click to expand...
Click to collapse
Thank you very much for your reply!
I'm going to try this and will report if it has worked.
Regards,
Thomas.
It isn't working for me yet.
I'm now draining my battery until it's at 0% and retrying this instruction.
Again I'll report if it has worked.
Regards,
Thomas.
I've been trying to get this to work for a couple of hours now. However there's no success yet.
I'm not giving up yet!
Any ideas?
Regards,
Thomas.
I did it!!!
I finally got into download mode!!!
After a lot of just tinkering around with this guide here, I was finally able to boot into download mode.
This is how I did it (this may not work for everyone):
1. Completely drain your battery. First I placed my battery in a LG L90. I ran as much tasks and services as possible on this device. When the battery was down to about 2% the phone automatically turned off. It was at 2% and 0% so I had to come up with something else. I got my battery and an LED. I held the LED to the + end - poles and waited until the LED turned off (the battery was now completely drained).
2. Place the battery back in your phone.
3. Press the on/off button. If you see the 0% battery icon go to step 4. If you don't see anything keep trying until you see the screen. If you still can't see the screen just give it some time and try it again later (if you want you can check if your battery is empty with the LED method).
4. Press the on/off button again and at the moment you see the 0% battery screen hold down the volume up button and plug your usb cable into your phone (the usb cable should already be connected to your computer) while holding the volume up button.
5. If nothing happens, try again. If you see the screen that tells you to keep holding that volume up button, you should be holding that button.
6. If you've reached the download mode screen you may sing your happy song now (I did).
7. Now flash your kdz (if you want me to post a how-to link, just ask).
8. Post your happy comment in this thread because you finally unbricked your phone!
I did this on my LG D620 and successfully unbricked my phone.
Regards,
Thomas.
lg g2 mini d620r
thomasikdus said:
I did it!!!
I finally got into download mode!!!
After a lot of just tinkering around with this guide here, I was finally able to boot into download mode.
This is how I did it (this may not work for everyone):
1. Completely drain your battery. First I placed my battery in a LG L90. I ran as much tasks and services as possible on this device. When the battery was down to about 2% the phone automatically turned off. It was at 2% and 0% so I had to come up with something else. I got my battery and an LED. I held the LED to the + end - poles and waited until the LED turned off (the battery was now completely drained).
2. Place the battery back in your phone.
3. Press the on/off button. If you see the 0% battery icon go to step 4. If you don't see anything keep trying until you see the screen. If you still can't see the screen just give it some time and try it again later (if you want you can check if your battery is empty with the LED method).
4. Press the on/off button again and at the moment you see the 0% battery screen hold down the volume up button and plug your usb cable into your phone (the usb cable should already be connected to your computer) while holding the volume up button.
5. If nothing happens, try again. If you see the screen that tells you to keep holding that volume up button, you should be holding that button.
6. If you've reached the download mode screen you may sing your happy song now (I did).
7. Now flash your kdz (if you want me to post a how-to link, just ask).
8. Post your happy comment in this thread because you finally unbricked your phone!
I did this on my LG D620 and successfully unbricked my phone.
Regards,
Thomas.
Click to expand...
Click to collapse
Thanks for your helpfull messages. This method is worked for my LG G2 mini D620r. It is a simple way to unbrick/unHARDbrick to your phone, if you can find a way to finish your battery. This is the same subject here. I want to add somethings.
I tried to unlock my bootloader too. But my phone is bricked so my phone
* cant open; only black screen.
* cant connect to pc; pc cant see my phone so doesnt work adb/fastboot mode.
* cant reboot recovery or download mode.
! but my phone shows an empty battery icon warning, if I remove the battery and connect my phone to charger.
When I read this i didnt believe this will works for me. But when i found the same method in this thread, i give it a try, and it WORKED for me too
1.a find a cable; short and thin, find something which works 1 AA/AAA or 2 AA/AAA; it may be a flashlight/torch or a toy or something like that.
1b. find a good condition usb data cable.
2. a led like that.. You can find it easy in your home. I used my old battery charger led or you can buy it.
3. uninstall all LG programs; LG USB driver, LG pc suite, LG *.* (reboot).
4. download and reinstall only LG-Mobile-Usb Driver(reboot). (maybe 3 and 4 are not necessary but i did)
5. remove your battery from phone, and connect it to your torch(flashlight, toy) with a cable. Yo can see +, - symbol on your battery and torch. Wait until your torch doesnt give light.
6. connect your battery to led and wait until led turn off. It maybe take long time, be patient.
7. put your battery on phone and push power button; if you cant see anything it is normal because your battery is completly drain or if you see an empty battery icon it is normal again because your battery is about %0, so 2 possible things but both of them are normal and enough/good.
8. connect your usb cable to your pc.
9. while pressing volume + plug your phone to usb cable and hold on(~10second).
10. If nothing happened dont worry, unplug your phone and go 9. (read 11)
11. If you tried more than five go 6 and keep try. (because your battery now ~%1, you should drain it again)
12. If you see the screen that tells you to keep holding that volume up button, you should be holding that button.
13. If you've reached the download mode screen you may sing your happy song now (I did too).
14. Now flash your kdz (if you want me to post a how-to link, just ask).
dont worry it will works. try again and again and agian... I tried more than 5. Good luck.
Thanks again, Thomas and panagiotisden2.
cebir98 said:
Thanks for your helpfull messages. This method is worked for my LG G2 mini D620r. It is a simple way to unbrick/unHARDbrick to your phone, if you can find a way to finish your battery. This is the same subject here. I want to add somethings.
I tried to unlock my bootloader too. But my phone is bricked so my phone
* cant open; only black screen.
* cant connect to pc; pc cant see my phone so doesnt work adb/fastboot mode.
* cant reboot recovery or download mode.
! but my phone shows an empty battery icon warning, if I remove the battery and connect my phone to charger.
When I read this i didnt believe this will works for me. But when i found the same method in this thread, i give it a try, and it WORKED for me too
1.a find a cable; short and thin, find something which works 1 AA/AAA or 2 AA/AAA; it may be a flashlight/torch or a toy or something like that.
1b. find a good condition usb data cable.
2. a led like that.. You can find it easy in your home. I used my old battery charger led or you can buy it.
3. uninstall all LG programs; LG USB driver, LG pc suite, LG *.* (reboot).
4. download and reinstall only LG-Mobile-Usb Driver(reboot). (maybe 3 and 4 are not necessary but i did)
5. remove your battery from phone, and connect it to your torch(flashlight, toy) with a cable. Yo can see +, - symbol on your battery and torch. Wait until your torch doesnt give light.
6. connect your battery to led and wait until led turn off. It maybe take long time, be patient.
7. put your battery on phone and push power button; if you cant see anything it is normal because your battery is completly drain or if you see an empty battery icon it is normal again because your battery is about %0, so 2 possible things but both of them are normal and enough/good.
8. connect your usb cable to your pc.
9. while pressing volume + plug your phone to usb cable and hold on(~10second).
10. If nothing happened dont worry, unplug your phone and go 9. (read 11)
11. If you tried more than five go 6 and keep try. (because your battery now ~%1, you should drain it again)
12. If you see the screen that tells you to keep holding that volume up button, you should be holding that button.
13. If you've reached the download mode screen you may sing your happy song now (I did too).
14. Now flash your kdz (if you want me to post a how-to link, just ask).
dont worry it will works. try again and again and agian... I tried more than 5. Good luck.
Thanks again, Thomas and panagiotisden2.
Click to expand...
Click to collapse
HI I'm asking whether this will work for Lg G2 Mini
I unlocked bootloader and patched it will it still work ???
I did this on a LG G2 Mini so yeah it should work for you too.
İt is amazing but yes, probably it will works.
doesnt work on my lg g2 mini d618, but thanks anyway, ill keep trying
Vagelis1608 said:
Check post #1 & #2 of this:
http://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Click to expand...
Click to collapse
you saved me to yesterday
ty dude
D618 Solution new procedure.
Hello. This procedure solved my problem with D618: youtube.com/watch?v=FXs7NAaTz4M&t=0s
Related
Hello community!
I own 2 Vibrants, both rooted with no issues. I'm no stranger to flashing through Odin, I've flashed many of the Vibrants in my workplace back to the stock 2.1 (seems to fix most of the issues short of GPS problems, even though it's supposed to be the same), so download mode is nothing new to me.
Recently a few of the people who've come to me with Vibrants have shown how they can't get in to recovery or download mode without using ADB, the hardware keys just don't seem to work for it. I've tried myself and was able to confirm this. We were still able to root them with no issues using one click root. I prefer to manually flash the update.zip myself, but whatever does the job. I've just received a replacement for one of the Vibrants (menu button went out), and noticed I can not get in to recovery/download mode. Naturally I rooted, installed terminal, then rebooted in to download mode, started a flash with Odin.
It hung on cache.rfs. I waited... and waited.. and it mocked me in it's frozen status. So now I'm at the phone+!+computer screen, which I've been at several times on my main Vibrant, but the key's still do not work for download mode. To clarify, I've tried each of the following methods to enter in to download mode, several times. It won't work. I'm in the process of trying different button combination's to see if there is another way to get in. Anyone have any thoughts or suggestions?
Edit: Included working steps so people don't have to search the thread
Provided by rhcp0112345:
Try this.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up AND volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Originally Posted by stepinmyworld
"have your usb in, press down both the volume up/down toggle and the power button.... hold them until the screen goes black and as soon as it does, let go only the power button and it should appear there again
however, i found out that you need to take out the battery and get into download mode freshly again...."
Hello,
If the above does not work for you.
Can you supply a full dump of the phone? Perhaps I/others can take a look at it.
Thanks!
I have tried that. I have tried almost every combination I can think of. I have tried holding both volume rockers then inserting the battery while plugged in to USB, holding the power through 1 and 2 cycles, I have even tried 3 and 4 cycles as well. I have tried just vol down, just vol up, both with the same results. I have purposefully bricked my main Vibrant to test this out and make sure I wasn't losing my mind. I was able to get in to download mode several ways, none of which work on this new device.
@rhcp0112345 - How do I grab a full dump of the phone? I'll be honest, I've never spent very long in phone+!+computer before tonight. I've never been stuck here long enough to see how to connect via computer. At this moment, plugging the phone into the pc gives me no prompts that something has been plugged in, the phone isn't seen by adb (big shock) or Odin. I'm at a loss myself.
Well,
First thing.
Can you please dump like so:
Code:
adb shell
su
busybox ls -al /dev/block/
Post that here.
Also,
Code:
adb shell
su
dd if="/dev/block/bml0!c" of=/sdcard/bml0.backup
Please 7zip the bml0.backup file and upload it someplace and PM me the info. Dont post it public.
Thanks!
I'll be happy to do that with the next device I have this issue with, but I can't boot the phone, therefore I can't connect via ADB (been trying, if I could do adb, I could just simply 'adb reboot download' to get in to download mode). I'm thinking at this point I will have to exchange the phone, as I can't get past the phone+!+computer screen no matter what I try.
I was running into this problem too. I re-extracted the files and tried again and it worked. I also tried it without loading the .pit into odin, not sure which of two or both did it. Not sure if its the right way, but that did it after hangin on the cache numerous times.
Sent from my SGH-T959 using XDA App
Follow the unbrick method.
You pull the battery and some other stuff.
To get it past that.
I think its volume up? + power?
Yeah, removing the .pit file seems to fix the lock up issue in Odin, but unfortunately, I'm not even getting to the download screen, so I can't get Odin to find the phone. I'm sure once I get to download mode I can get it running, but I'm unable to get download mode on this one device.
Try this.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up AND volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
rhcp0112345 said:
Follow the unbrick method.
You pull the battery and some other stuff.
To get it past that.
I think its volume up? + power?
Click to expand...
Click to collapse
If you mean this solution to fix any brick, I have tried that method, it doesn't work on this new device. I originally used this thread when I was messing with my first Vibrant, and it worked beautifully, but it doesn't work on the new vibrant.
So I've pretty much given up on trying to figure this out. I've tried every method possible, all work on both my non-replacement vibrants, but nothing works on the replacement one. Going to have it replaced again and have a new one ordered out. When that one gets here, I will test download/recovery modes, if I have any issues, I'll pull the dump file and post it here, maybe someone can figure out what's going on. On the back of the device, the IMEI sticker has manufacture dates (year.month), looks like the replacement was a 10.7 just like my original Vibrant, so it's not a manufacturer date type issue, it's got to be something changed in the software side of things. It's almost as though the volume rocker keys do not work for recovery/download mode, I get the exact same thing as if I'm just pressing the power button. When I did get in to recovery (before getting to it's current state), the volume keys worked fine for selection though. I can confirm that there is no new information on tmob's side about how to do a hard reset using the hardware buttons (ie, recovery mode) as of this posting.
Did you try with the phone OFF..
1. Have ODIN running
2. Hold Volume Down + Up
3. Plug in USB (WHILE HOLDING VOLUMES buttons in)
Should go directly into DOWNLOAD mode
I did try that as well. Works beautifully on both my old Vibrants, but not on this new one.
Sent from my SGH-T959 using XDA App
johnny12times said:
I did try that as well. Works beautifully on both my old Vibrants, but not on this new one.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Drats!!! Oh well, time to go back to T-Mobile
johnny12times said:
I did try that as well. Works beautifully on both my old Vibrants, but not on this new one.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
@ Johnny12times: Dude u'r right. I've played around with a few different vibrants and they could all go into "download mode" - but when receiving a replacement unit (within the last 2 days), nothing works to go into download mode. Something has definitely changed - not sure what.
Good luck bro - hope it all works out.
I received my Vibrant last Thursday (8/19). I have never been able to boot into recovery mode using the buttons. Needed to root by using one-click.
Ive also tried every button combo and am still unable to get recovery or download. I received the phone last fri (8/20). Its so frustrating knowing that so many other people can get manual recovery. Im sending it back tomorrow for replacement, but who knows if that one will even work? I hope someone figures out why so many vibrants are unable to do this. Good luck!
Well my new one should be here within the next day or so, as soon as it arrives I'll check it and pull a dump file. I'm not savvy enough to figure out how to fix it, but at least smart enough to put it here for the people that can.
How about this:
1. Remove SD and SIM card
2. Remove battery
3. plug the phone into USB
4. hold down vol-up and vol-down
5. pop the battery back in while holding vol buttons
I have this phne for 2-3 weeks and it never run out of battery completely. Yesterday it did and when i plugged the charger it opened and it got stuck in the clock screen. No buttons are responding only the hard reset (power button and the middle one). The screen turns on and off every one minute. It is a mess...any help is appreciated!
Solved: Thank you guys for helping. I found that the solution was to download the Update Service from SE and follow EXACTLY the steps it mentions.
Steps:
1 Deactivate the phone for 30 secs. (in this case unplug the battery once it could not close normally)
2 plug the micro USB in the phone and then the USB to the PC
3 Before plugging the USB to the pc press the back button and hold it for as it takes. it takes a while. the the update service will start formating your software and it will be as new...notice that what the sd card contrains isn't deleted
realy ther is noone with the same problem? i start to worry. please could anyone say any opinion?
Hello,
try to start your phone in save mode and then deinstall your 3. party apps.
I think the failture comes from an app.
an app could also be the reason for a verly long boot time.
her some info's about the save mode: androinica.com/2010/08/06/how-to-activate-android%E2%80%99s-safe-mode-to-get-out-of-a-force-close-loop/
hope this can help you with your problem.
My suggestion to you would be to take it back to the place where you bought it and tell them to fix it... if it's only 2-3 weeks old they shouldn't argue.
Not sure If this should be here or not. I've tried my best to search for anything similar.
I have a Sony Ericsson Neo V MT11I and I unlocked it using a program, with my USB Cable.
The unlock cost me £13 and it worked fine. I checked the phone, and It was making calls and working fine.
A few hours later, it was off, so I put in the charger and nothing. No screen or activity. The green light next to the power button comes on and If I connect it to my computer, the computer detects it, then doesn't. (I hear the new device done every minute or so). When it detects then detects its unconnected the green light flashes once.)
It was working fine after I unlocked it, but this seems to of happened hours after I unlocked it.
Thanks for any help!
Hm, sounds to me like your phone entered some sort of bootloop, it can't even go to that image which you see when you charge phone(turned off).
Maybe that's why it founds it, then it disappear, and then it founds it again, and so on.
Can you please try 2 things.
1)hold back key and connect cable to phone (of course, other side is in PC)
2)hold menu key(that's the right one, some people confuse it with home key ) and connect cable(of course, other side is in PC)
Report what happens then. To be more safe, can you please re-insert battery between 1 and 2 (and also before 1) )
Hi Buddy,
While pressing the Menu key, and connecting it, the light remains off, until I release the button. Now I've done this, there is no sound on the computer. Even If I connect it normally without pressing any key.
Thanks,
You didn't answered on my entire question.
Plus, how did you unlocked it? And by unlock, you mean SIM unlock(able to use any SIM card)?
I did that and until I let go of the menu key the light didn't come on, now it lights up upon plugin, but I hear no activity on my computer.
I used wotanserver . com/en/sony-ericsson to sim unlock it, and sorry If I was not clear!
Thanks again.
back key, back key, you didn't answer me on that part
anw, try flashing it with wotan.
Sorry for the late reply. I flashed it, and it's now working fine. I would like to thank you for your help, I'd buy you a pint If I could.
I was using my tablet while finishing charging. I was about 95%. Suddenly it just went black and won't turn back on. Any ideas? I've tried holding the power button with no results. Is there a special reset or something?
Anyone else have this issue or things I can try to fix it?
Sean09 said:
I was using my tablet while finishing charging. I was about 95%. Suddenly it just went black and won't turn back on. Any ideas? I've tried holding the power button with no results. Is there a special reset or something?
Anyone else have this issue or things I can try to fix it?
Click to expand...
Click to collapse
Have you tried PC Companion? Download it for Windows then try to locate for emergency repair. It will show you instructions of how to put your tablet in flash mode.
juanyunis said:
Have you tried PC Companion? Download it for Windows then try to locate for emergency repair. It will show you instructions of how to put your tablet in flash mode.
Click to expand...
Click to collapse
I haven't tried that specifically, but would it not fail if the light didn't even go on when plugged in, and my pc doesn't even read it as connected?
Sean09 said:
I haven't tried that specifically, but would it not fail if the light didn't even go on when plugged in, and my pc doesn't even read it as connected?
Click to expand...
Click to collapse
Not really, for example in some samsung devices even if the device wont turn on the a JIG plug was able to put the phone on download mode, something very similar to flash mode on the xperia mobiles.
So i guess the last thing you can try is to put the tablet in flash mode, you can download a FTF file with the firmware compatible with your device, and download flashtool from: Click here to download and then put your tablet on flash mode. I guess you will need first the drivers Click here to see drivers and after you install the drivers, just open flash tool press the vol down key and connect the usb cable to the tablet, and if you see that flashtool or maybe windows recognizes your tablet you may have luck to restore it.
So if you get it into flash mode, then just flash the FTF and let's see what happens.
Let me know.
I will give it a test this evening or tomorrow - thanks! I will post back if it works.
PC Companion doesn't detect the tablet, nor does my PC at all in device manager. It doesn't respond like anything is plugged in, but it did before.
Flashtool comes up with nothing either - once again doesn't even acknowledge anything is plugged in.
Thanks for the suggestions, though.
Sean09 said:
I was using my tablet while finishing charging. I was about 95%. Suddenly it just went black and won't turn back on. Any ideas? I've tried holding the power button with no results. Is there a special reset or something?
Anyone else have this issue or things I can try to fix it?
Click to expand...
Click to collapse
hard reset is the only option... press vol up key plus power button...
just happened to me not five minutes ago.
vjawsm said:
hard reset is the only option... press vol up key plus power button...
just happened to me not five minutes ago.
Click to expand...
Click to collapse
I read your issue. Read my first post again - yours is simply a crash. Mine does not charge, has no power LED, and is completely unresponsive. No recovery button combination or anything works - yours turns on and responds to things.
so when you try vol up and power button do you not see the white led flash once then a couple seconds later three times? if it does it means your tablet can still be put into flash mode with some perseverance.
Edit: you could try sony mobiles flash tool called Emma which has its own way of entering flash mode (think you hold vol down and plug the usb cable in the computer) and see if that program can detect your tablet but you can use the instructions provided on their website if your unsure what to do.
same sitation
I have the same problem with my tablet. I watched stock photos in album and then display switched off. And that's the end.
Nothing happens when I try to power on, reboot or restore with Companion. Computer doesn' detect device. The same situation with Emma and flashtool.
I used my new-bought tablet only for 15 minutes)))
Mine ended up needing replacing due to a fried mainboard. Did you leave yours plugged in overnight?
Ok something strange happen to the tab I never had problem before I left the headphone plugged in a press the power button to close the screen (I always do that) when I try to use the tab there was nothing on screen double tab the screen nothing, hold the power button nothing put the tab in the cradle nothing the led was not turning on but the usb cable direct to the pc and than the charger nothing. I press the volume up and power button the tab led blink and was able to restart the tab. ??????????
Same thing just happened to me. Power button would not turn on the Z. LED would not turn on when charged. Did a hard reset and it came back on. Model: SGP312.
Sean09 said:
I was using my tablet while finishing charging. I was about 95%. Suddenly it just went black and won't turn back on. Any ideas? I've tried holding the power button with no results. Is there a special reset or something?
Anyone else have this issue or things I can try to fix it?
Click to expand...
Click to collapse
Pc companion will not work in thta situation cause it needs the device to be powered on...
In that case have you try the SUS http:/sonymobile.com/gb/tools/update-service/
Just follow the instructions and you will be fine
It will erase the entire internal memory though, sd is fine..
Sent from my SGP311 using xda app-developers app
arcsuser said:
Pc companion will not work in thta situation cause it needs the device to be powered on...
In that case have you try the SUS http:/sonymobile.com/gb/tools/update-service/
Just follow the instructions and you will be fine
It will erase the entire internal memory though, sd is fine..
Click to expand...
Click to collapse
Your URL is borked. Here is the correct one. Sony Mobile's Update Service
Cat McGowan said:
Your URL is borked. Here is the correct one. Sony Mobile's Update Service
Click to expand...
Click to collapse
Lol, how in the world that my link goes to verizon?
Well, i typed it because i have no idea how to copy links from chrome..
Sent from my SGP311 using xda app-developers app
galaxy tab 8.9 AT&T model
I have an AT&T model-Galaxy tab 8.9. It died and won't turn on. I have tried holding the power button, the power button with volume button. Nothing seems to work. Any ides, PLEASE???????????????
Thanks
jrs369 said:
I have an AT&T model-Galaxy tab 8.9. It died and won't turn on. I have tried holding the power button, the power button with volume button. Nothing seems to work. Any ides, PLEASE???????????????
Thanks
Click to expand...
Click to collapse
Here is a URL for the Samsung Galaxy Tab 8.9 forum.
no solution ???
Guys i found the solution, i just opened the back of the tablet and unplugged the battery connector and re-plugged it again, and the tablet came back to life
Hello. Yestarday my xperia z2 has turned itself off and since then I can not turn on her. Even the red button OFF, which is used to restart the device does not help. I do not know what to do. I have guarantee for him but I would like to ask you first if maybe someone already had this problem and is able to help me. Phone was plugged in all night to the charger but it did not help. Sorry for my english, I wrote with the help of translator.
sony69 said:
Hello. Yestarday my xperia z2 has turned itself off and since then I can not turn on her. Even the red button OFF, which is used to restart the device does not help. I do not know what to do. I have guarantee for him but I would like to ask you first if maybe someone already had this problem and is able to help me. Phone was plugged in all night to the charger but it did not help. Sorry for my english, I wrote with the help of translator.
Click to expand...
Click to collapse
to Force power off hold power button and volme up button
try powering your device on after it buzzes 3 times
if it doesnt work try reparing the device via sony PC companion > support zone,
simply folow the instructions
Envious_Data said:
to Force power off hold power button and volme up button
try powering your device on after it buzzes 3 times
if it doesnt work try reparing the device via sony PC companion > support zone,
simply folow the instructions
Click to expand...
Click to collapse
None of these methods has not helped. Phone does not vibrate at all when hold power button and volume up button.
Only a turn on for a while the red led in the support zone when he has displayed in order to connect your phone to your computer to update, but the computer it has not detected
sony69 said:
None of these methods has not helped. Phone does not vibrate at all when hold power button and volume up button.
Only a turn on for a while the red led in the support zone when he has displayed in order to connect your phone to your computer to update, but the computer it has not detected
Click to expand...
Click to collapse
You sure you have the drivers on pc ? If not i think you could manually install them if it doesnt find it .
Croize said:
You sure you have the drivers on pc ? If not i think you could manually install them if it doesnt find it .
Click to expand...
Click to collapse
Yes I have, becouse a few months ago i flashed no brand room so im sure 100% that i have drivers
When I plug phone to PC it displayed on the phone a red LED on the moments and immediately turns off, but the phone still does not respond and sony pc compation not detect it
sony69 said:
Yes I have, becouse a few months ago i flashed no brand room so im sure 100% that i have drivers
When I plug phone to PC it displayed on the phone a red LED on the moments and immediately turns off, but the phone still does not respond and sony pc compation not detect it
Click to expand...
Click to collapse
So you know, When you use flashtool, The phone looks like its off, But its rly not.. Its part of its process.. incase you think its wrong