Related
I loaded the P7510 root files on it (BAD IDEA for anyone reading).
I tried to "re-stock" it with the P7500 stuff and it wouldn't work. (when I get home I will try to find the right .pit file and try it again)
I tried to push a new rom with ADB and flash it and so far no joy.
If anyone has any ideas I am open to them.
if anyone has the t-mobile 10.1 tab.... CWM recovery seems to work. I need a full system backup to restore my tab. If anyone can help it would be appreciated.
dagentooboy said:
I loaded the P7510 root files on it (BAD IDEA for anyone reading).
I tried to "re-stock" it with the P7500 stuff and it wouldn't work. (when I get home I will try to find the right .pit file and try it again)
I tried to push a new rom with ADB and flash it and so far no joy.
If anyone has any ideas I am open to them.
if anyone has the t-mobile 10.1 tab.... CWM recovery seems to work. I need a full system backup to restore my tab. If anyone can help it would be appreciated.
Click to expand...
Click to collapse
What version of the CWM do you have? I found that 4.x and 5.x versions create different file types for the nandroid backup and they are not compatible.
I can create a backup for you tomorrow for any of the CWM, just tell me which one you need.
[EDIT]
I have a unbranded 10.1 3G and the backup would be from a modded Overcome ROM, but at least you would get the tab back to work.
[/EDIT]
I think it needs to be the T-Mobile ROM. I can flash stock roms for the P7500 if they are the same. Anyone else try any roms on the t-mobile tab?
dagentooboy said:
I think it needs to be the T-Mobile ROM. I can flash stock roms for the P7500 if they are the same. Anyone else try any roms on the t-mobile tab?
Click to expand...
Click to collapse
Didn't the T-Mobile just release? Your the first post I have seen for it. What the model? P7500 or something else?
Also, FYI or not, this does not belong in the Dev section. Please read the rules for posting.
http://forum.xda-developers.com/announcement.php?f=1053
It was meant as a combined warning and cry for help I figured since this is where everyone comes for info on root... the warning should be here too. The model number is SGH-T859
you may need some one else to do a t-mobile rom dump, and reflash either through cwm or odin. Did you check the samsung firmware site for a recovery image? As a last resort, you could exchange it for a new one. And of course make a good backup in the future to go off of.
BTW, that is odd that your model number is so different from the normal gt-7xxx. Just to be sure, this is a galaxytab 10.1 or 8.9, right?
Yeah it is a 10.1 .... t-mobile always has a new number but it does surprise me that the p7500 stuff isn't working... I will try again tonight. If anyone has the T-Mobile 10.1 tab please send me a system backup
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Not surprised the model number is different considering the LTE from Verzion is different as well.
ok so I got it to work with the 002001-Overcome_CWM_Recovery_v5.1.2.3.tar here
I am making a backup. I couldn't get the "re-stocking" part to work. It looks like we need a .pit file. But if you want the CWM recovery that should work.
So far my wifi hasn't come back :'(
I am going to try a few more things and report back
Wish I'd seen you're posts sooner. I pretty much followed you right off the same cliff. I was hoping that an easy solution was at hand. I'm much more a noob at this stuff, and am having trouble communicating with the tablet at all, much less doing anything to problem solve it. I do have CWM v4.0.1.4 working and would be happy just getting the stock kernal back on it. Guess I have a lot of reading and learning to do this week.
If anyone can help, I'd (we) would really appreciate it. I have a long hospital stay coming up on the 14th and this tablet was going to make it a bit more bearable. Is there a way to remove CWM so I could do a return to T-Mobile? Just a thought...
Thanks for any input.
Hmmm this is for the new 10.1 4G model? I have a stock one I had been waiting to root til I could find out if existing methods worked or not
can u pls send me your stock boot.img?
would like to add support for it.
thx.
ktiedt said:
Hmmm this is for the new 10.1 4G model? I have a stock one I had been waiting to root til I could find out if existing methods worked or not
Click to expand...
Click to collapse
Yeah, don't root it yet. The current root methods don't support it. Man, if you could provide pershoot with an image and/or me with a nandroid backup that would be fantastic. I don't mind waiting for the excellent developers here on XDA to do their stuff (it's always worth it), but I've got about a week to get mine up and running again.
Thanks for whatever you can do.
I got mine to root just fine, using the process in the stickie. I used odin and then cwm to install root. Stayed on stock rom and used Ti backup to uninstall bloatware. I am happy as can be
Sent from my SGH-T859 using XDA App
point me to the recovery image you used, I'll dump a nand and upload it (asking for link just to ensure you get exactly what you need)
HI
Hi, I have a model like yours, t-mobile model: SGH-T859, if you send me a step by step I can send the files you need to get your table
Anyone has a solution for this right now?
I am stuck with the same problem
Thanks
Thanks for posting this info, I am sure this post has saved a lot of ppl from jumping off the same cliff.
Hi guys
Sorry but i am a noob to all this so have proberly stupid questions.
After flashing to a customer rom i went back to a stock t-mobile rom. Problem i now face is when i try to download apps from other companies that are not on the app store eg mfortune they are unable to detect the type of phone i am using so i get "sorry we do not currently support your device" despite being able to do so before rooting and flashing. Is there a way i can change this with the release of skyGo on android this month i want to be able to download it. As it will be only on the galaxy s2 and HTC phones for some time i dont really want to wait.
Any help please???
Did you do a full whipe? Adding some details like model number, the rom you flashed and the one you came from may get you some more useful results.
As for the skyGo app, it won't take more than a day for it to pop up as an APK somewhere on the net.
Hello
Thanks for the reply i am currently in work so i cant look at my phone but will update on which firmware and kernal version i am running
I did however follow this guide to root reviews.cnet.co.uk/mobile-phones/how-to-root-your-samsung-galaxy-s2-50004972/[/url]
Not sure if that helps i did not however use the guide to flash the secure kernal maybe thats where i have gone wrong.
I will update the thread with the info later.
Thanks again
Hi everyone,
I have two Chinese tablets ( nonames) with Android ICS that I have already rooted
and I would like to flash a Custom ROM Jelly Bean on it.
I have never flashed a device before.
I dont know even what ROM is compatable to this device.
What I would need to know first before I would ever try to flash it.?
I really do not want to brick it. :crying:
Thanks in advance for all suggestions.
You're going to have to provide more details before anyone can help you.
Going to need to know the manufacturer, tablet specs, model number.
Flashing is different for all tablets so unless you can identify it, there is no way to tell you the proper procedure.
I bought this phone some months ago, I was excited with it because is very useful and has a good performance. I was looking for a custom ROM because stock ROM is not so pretty, I'm not a developer but I know a little bit about it, I wanna create the first ROM based in Stock ROM, just for begining. I need help for it, I know that there's many people with this phone and a lot of them know much than me, if someone want to help me or wanna learn with me about development, please contact me or write in this post.
To begin, I only extract system folder and kernel IMG from stock ROM, my problem is with the META-INF folder, because kitchen create that, but it's not useful if I don't modify updater-script file (when I try to flash it with CMW I get status 0 error). Please help me, even if you are a DEV for another Alcatel phone, maybe you know what I can do to fix error.
Great to hear somebody cooking rom for Alcatel One Touch C3 4033X!
Seems I cannot find any custom ROMs for it online, the nearest I got is a discussion on the phone albeit different model.
http://forum.xda-developers.com/showthread.php?t=2546705
And I found this 4.4.2 Kitkat ROM, not sure it's valid one, and dunno for which model
http://www.442kitkat.info/mp3-0/alcatel-one-touch-pop-c3-5687.html
navilink said:
Great to hear somebody cooking rom for Alcatel One Touch C3 4033X!
Seems I cannot find any custom ROMs for it online, the nearest I got is a discussion on the phone albeit different model.
http://forum.xda-developers.com/showthread.php?t=2546705
And I found this 4.4.2 Kitkat ROM, not sure it's valid one, and dunno for which model
http://www.442kitkat.info/mp3-0/alcatel-one-touch-pop-c3-5687.html
Click to expand...
Click to collapse
Yes, it's difficult because I'm not a developer, but I'm trying, even if I found something to get th phone better and not just scripts, I will post it here.
Alcatel 4033A
hey am interested in making a rom for this phone and i want to know how to extract the system folder
Are you a developer?
DMD567 said:
hey am interested in making a rom for this phone and i want to know how to extract the system folder
Click to expand...
Click to collapse
Also I want, but I'm not a developer, I only learn to make that, but if you want to develop a ROM I can send you boot.img and system folder. If you want to extract it by your own way, I extracted it making a backup, then I copied the backup to my PC and uncompressed system.ext4 file.
Alcatel 4033A
i don't have a Linux computer so can't do it and am not a Dev.
giovann134 said:
I bought this phone some months ago, I was excited with it because is very useful and has a good performance. I was looking for a custom ROM because stock ROM is not so pretty, I'm not a developer but I know a little bit about it, I wanna create the first ROM based in Stock ROM, just for begining. I need help for it, I know that there's many people with this phone and a lot of them know much than me, if someone want to help me or wanna learn with me about development, please contact me or write in this post.
To begin, I only extract system folder and kernel IMG from stock ROM, my problem is with the META-INF folder, because kitchen create that, but it's not useful if I don't modify updater-script file (when I try to flash it with CMW I get status 0 error). Please help me, even if you are a DEV for another Alcatel phone, maybe you know what I can do to fix error.
Click to expand...
Click to collapse
Hi!
I have the same phone, and I would like help you to develop :laugh:
In this days I working on this phone and I'm trying to port this rom for this phone, but with no success.
http://forum.xda-developers.com/showthread.php?t=2687487
PS. If you want to create a Rom,first flash the CWM recovery for this phone...
Edit: Maybe, Today, I'll public my first rom...do you have Meta-Inf Folder?
We got a lot of roms
Hey guys just wanted to tell you we already have lots of roms for the Alcatel OT Pop C3 .
popc3.hol.es/roms.html
romspopc3.blogspot.com
alcatel-onetouch-popc3.blogspot.com
You may read these guides
http://www.gsmarena.com/alcatel_pop_c3-5687.php
http://en.miui.com/thread-20482-1-1.html
http://forum.xda-developers.com/showthread.php?t=2701283
:good:
Juandr0ide said:
Hey guys just wanted to tell you we already have lots of roms for the Alcatel OT Pop C3 .
popc3.hol.es/roms.html
romspopc3.blogspot.com
alcatel-onetouch-popc3.blogspot.com
Click to expand...
Click to collapse
Hi. Which custom ROM works on 4033x ?
All of them
Sent from my A1-840 using XDA Free mobile app
hi...please help me to update alcatel one touch magic to latest version
http://alcatel-onetouch-popc3.blogspot.co.nz/
Hi guys
I'm following XDA forum for some years now, under a different nickname, and this is my first post.
Unfortunately this is a Help Me!!! post
This is the situation:
My son as a A13 Q88E board android tablet, and a friend of him, made some experiences with the device, installing CWM-based Recovery v6.0.1.2. in it.
Now it's stuck on a neverending bootloop recovery.
I Know that i could flash a new rom, but the problem is that this one in particular ins't available nowhere. It's a Avery E700, similar to Navcity NT-1710, and others, actually they are the exact same thing, only diferent brands.
The solution that is rolling over the internet it's to flash a Mapan rom (MX713), but chances are that it will not work 100%.
I would like to remove the CWM recovery so i can boot into system again.
Somehow i managed to extract a rom dump of the installed original rom, but that's it, i'm stuck there, i can't restore that backup, and right now i just can't afford to buy a new tablet for him.
Is there any way to replace that CWM-based recovery?
Sorry for the log post, and i want to say thanks in advance to all help you can provide.
Fernando
Jmf Info said:
Hi guys
I'm following XDA forum for some years now, under a different nickname, and this is my first post.
Unfortunately this is a Help Me!!! post
This is the situation:
My son as a A13 Q88E board android tablet, and a friend of him, made some experiences with the device, installing CWM-based Recovery v6.0.1.2. in it.
Now it's stuck on a neverending bootloop recovery.
I Know that i could flash a new rom, but the problem is that this one in particular ins't available nowhere. It's a Avery E700, similar to Navcity NT-1710, and others, actually they are the exact same thing, only diferent brands.
The solution that is rolling over the internet it's to flash a Mapan rom (MX713), but chances are that it will not work 100%.
I would like to remove the CWM recovery so i can boot into system again.
Somehow i managed to extract a rom dump of the installed original rom, but that's it, i'm stuck there, i can't restore that backup, and right now i just can't afford to buy a new tablet for him.
Is there any way to replace that CWM-based recovery?
Sorry for the log post, and i want to say thanks in advance to all help you can provide.
Fernando
Click to expand...
Click to collapse
Best Thing is to Flash the tablet with a proper Firmware..which is very difficult to find.. recently i found a good firmware for my A13 tablet.. it worked very fine with my A13 MID tablet.. i cannot post links yet. try searching this.. tech360lanka(dot)blogspot(dot)com