Hello. Is it posible to unlock the Kindle Fire's bootloader with a Mac? I read guides but it requires to have Windows installed, if I have to get Windows it is safe to do this with a VM? (Virutalbox, etc.)
All you need is Python and adb/fastboot.
See:
http://forum.xda-developers.com/kin...bootloader-unlock-procedure-software-t3030281
http://forum.xda-developers.com/kin...tools-create-unlock-img-fix-boot-img-t3050689
Ok, thanks. I'll try it tomorrow hopefully.
Sent from my Nexus HDX 7 using XDA Free mobile app
EncryptedCurse said:
All you need is Python and adb/fastboot.
See:
http://forum.xda-developers.com/kin...bootloader-unlock-procedure-software-t3030281
http://forum.xda-developers.com/kin...tools-create-unlock-img-fix-boot-img-t3050689
Click to expand...
Click to collapse
Do I get Python 2.7.10? One guide said 2.7, but Python 2.7.0 is only for 32bit.
I got 2.7.10, and when I run cuberHDX.py, it requires GMPY2, but I am not sure how to install it
EncryptedCurse said:
All you need is Python and adb/fastboot.
See:
http://forum.xda-developers.com/kin...bootloader-unlock-procedure-software-t3030281
http://forum.xda-developers.com/kin...tools-create-unlock-img-fix-boot-img-t3050689
Click to expand...
Click to collapse
Ok, I almost got gmpy2 working, but when I go and install it this pops up: :crying:
EDIT: I fixed the gmp.h error, but now I get this.
Processing gmpy2-2.0.7
Writing /Users/***********/Downloads/gmpy2-2.0.7/setup.cfg
Running setup.py -q bdist_egg --dist-dir /Users/***********/Downloads/gmpy2-2.0.7/egg-dist-tmp-U9lI_b
In file included from src/gmpy2.c:417:
src/gmpy.h:252:12: fatal error: 'mpfr.h' file not found
# include "mpfr.h"
^
1 error generated.
error: Setup script exited with error: command '/usr/bin/clang' failed with exit status 1
Click to expand...
Click to collapse
I fixed the error now i get this:
Processing gmpy2-2.0.7
Writing /Users/***********/Downloads/gmpy2-2.0.7/setup.cfg
Running setup.py -q bdist_egg --dist-dir /Users/***********/Downloads/gmpy2-2.0.7/egg-dist-tmp-58goNz
In file included from src/gmpy2.c:417:
src/gmpy.h:261:12: fatal error: 'mpc.h' file not found
# include "mpc.h"
^
1 error generated.
error: Setup script exited with error: command '/usr/bin/clang' failed with exit status 1
MinerBoy004 said:
I fixed the error now i get this:
Processing gmpy2-2.0.7
Writing /Users/***********/Downloads/gmpy2-2.0.7/setup.cfg
Running setup.py -q bdist_egg --dist-dir /Users/***********/Downloads/gmpy2-2.0.7/egg-dist-tmp-58goNz
In file included from src/gmpy2.c:417:
src/gmpy.h:261:12: fatal error: 'mpc.h' file not found
# include "mpc.h"
^
1 error generated.
error: Setup script exited with error: command '/usr/bin/clang' failed with exit status 1
Click to expand...
Click to collapse
Just use draxie's cuber.py, which doesn't rely on gmpy2.
I got GMPY2 working, and unlocked my bootloader!
Thanks for your help too! But i didn't know how to sign the unlock.img lol so i tried the gmpy2 way.
Sent from my Nexus HDX 7 using XDA Free mobile app
Related
Hey,
first of all, thanks to ph84 for helping me getting the wireless drivers running and all the others who take part on developing Linux on Folio 100.
After this HowTo you'll be able to use wireless on your Folio!
Just follow this post, but add "build-essential" to the --seed part of the rootstock command to get gcc basic libraries for building applications on the folio!
Download the latest version of the compat wireless drivers and the firmware
Put the sd-card/usb-stick in your computer where you extracted your rootstock image to
Extract the wireless drivers source to whatever directory you want
Copy the folio kernel source to /lib/modules/2.6.32.9/build
Extract the ath6kl folder from the firmware tar-file to /lib/firmware
Rename the bdata.SD31.bin to bdata.CUSTOM.bin (needs root access)
Then safely plug out your sd-card/usb-stick, put it into your folio and start it
Open up a shell and browse to the folder where you extracted the driver source to ($ cd /home/ubuntu/compat-wireless-2.6.39-rc1-3/)
select the drivers ($ ./scripts/driver-select ath6kl)
build the driver ($ make)
install the driver ($ sudo make install)
restart and your wireless adapter should be present in network manager
The only problem which is still open is that you aren't able to connect to your WPA-Access-Point directly.
You have to add your Wireless-LAN manually in the network manager..
Have fun with that
Hope we will get the sound and so on running soon!
Thx to erazor & ph84... they had make a great job.
hey EraZoR could you post the files from the build please? i dont have my folio handy and i only have the driver there...
it should be some files called compat-wireless*.so or so...
also, the firmware would be really usefull.
then i can put that in the howto and users dont have to compile for themselves (which takes about 700mb for sources and a lot for build-essential)...
Hi there
first of all thanks for your great work,
I'm trying to get wifi working on my ubuntu installation but i got stuck at step 10 when builiding the drivers. Do I have to copy any additional files or change settings?
make runs into these errors:
Code:
make -C /lib/modules/2.6.32.9/build M=/home/Philipp/compat-wireless-2.6.39-rc1-3 modules
make[1]: Entering directory `/lib/modules/2.6.32.9/build'
ERROR: Kernel configuration is invalid.
include/linux/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
WARNING: Symbol version dump /lib/modules/2.6.32.9/build/Module.symvers
is missing; modules will have no dependencies and modversions.
make[1]: Leaving directory `/lib/modules/2.6.32.9/build'
it would be great if you could provide your buit files, I don't have to compile them myself though
Saint9192 said:
Hi there
first of all thanks for your great work,
I'm trying to get wifi working on my ubuntu installation ...
Click to expand...
Click to collapse
How have you installed ubuntu? I don't found *.rar file to complete ph84 howto.
gipposat said:
How have you installed ubuntu? I don't found *.rar file to complete ph84 howto.
Click to expand...
Click to collapse
I didn't found it either, so just left this step out .
I have used the attached .zip file to flash the tablet.
I found this one in a post from ph84 in DerArtem's Linux HowTo in this forum
when I tried to create a root file system using rootstock, I got an error while installing xulrunner, so I left out the
Code:
--seed xubuntu-desktop
parameter and just added the build-essential package via chroot.
result:
I don't have a GUI but I'm able to log into an runnig ubuntu
gipposat said:
How have you installed ubuntu? I don't found *.rar file to complete ph84 howto.
Click to expand...
Click to collapse
I did a ubuntu-minimal with the seed command and got a running Ubuntu system but only with shell access.
Sent from my HTC Desire using XDA Premium App
°EraZoR° said:
Hey,
...
Copy the folio kernel source to /lib/modules/2.6.32.9/build
...
Click to expand...
Click to collapse
Hi,
I haven't in my *.img file a folder /lib/modules/2.6.32.9/build, I just have /lib/modules; I have to create it or am I missing something?
Of what is shown on the link folio kernel source, I have to copy all or just the kernel folder?
Thanks
gipposat said:
Hi,
I haven't in my *.img file a folder /lib/modules/2.6.32.9/build, I just have /lib/modules; ...
Click to expand...
Click to collapse
Same thing for me.
You shuld just create the folder. As for what to download, there shuld be a link somewhere near the top of the page that says "download" and that will give you all you need. (The file list you see below is what is in the download, it is the source for the kernel and all the modules it needs)
Sent from my HTC Desire using XDA Premium App
Problem with make driver
I used rootstock with only "--seed build-essential", I got a .img file and created a sdcard. Then I have added wifi driver just like this HowTo; I have created a new "/2.6.32.9/build" folder and I copied all "folio kernel source". So I have a running Ubuntu system (only with shell access) but at step 10 when builiding the drivers I have this error:
"config.mk:204: WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m."
FATAL: Could not load /lib/modules/2.6.32.9/modules.dep: No such file or directory.
FATAL: Could not load /lib/modules/2.6.32.9/modules.dep: No such file or directory.
...
What did I do wrong?
Thanks
gipposat;13007124
said:
...
when builiding the drivers I have this error:
"config.mk:204: WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m."
FATAL: Could not load /lib/modules/2.6.32.9/modules.dep: No such file or directory.
FATAL: Could not load /lib/modules/2.6.32.9/modules.dep: No such file or directory.
...
Click to expand...
Click to collapse
I get exactly the same errors
when running on your folio, do a
$cp /proc/config.gz /some/dir
$tar xvf /some/dir/proc.gz
$cp /some/dir/.config /your/folio/sources/
and retry the build. otherwise it "looks" like you dont have that stuff built into the kernel because were using our own kernel configuration (because its a folio )
good luck
Hello, I get this error when I try to build the driver :
CC /home/azer/w/compat/compat.mod.o
/home/azer/w/compat/compat.mod.c:8: error: variable ‘__this_module’ has initializer but incomplete type
/home/azer/w/compat/compat.mod.c:9: error: unknown field ‘name’ specified in initializer
/home/azer/w/compat/compat.mod.c:9: warning: excess elements in struct initializer
/home/azer/w/compat/compat.mod.c:9: warning: (near initialization for ‘__this_module’)
/home/azer/w/compat/compat.mod.c:10: error: unknown field ‘init’ specified in initializer
/home/azer/w/compat/compat.mod.c:10: warning: excess elements in struct initializer
/home/azer/w/compat/compat.mod.c:10: warning: (near initialization for ‘__this_module’)
/home/azer/w/compat/compat.mod.c:14: error: unknown field ‘arch’ specified in initializer
/home/azer/w/compat/compat.mod.c:14: error: ‘MODULE_ARCH_INIT’ undeclared here (not in a function)
/home/azer/w/compat/compat.mod.c:14: warning: excess elements in struct initializer
/home/azer/w/compat/compat.mod.c:14: warning: (near initialization for ‘__this_module’)
make[2]: *** [/home/azer/w/compat/compat.mod.o] Error 1
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/lib/modules/2.6.32.9/build'
make: *** [modules] Error 2
Click to expand...
Click to collapse
Can somebody help to solve the problem please?
ph84 said:
when running on your folio, do a
$cp /proc/config.gz /some/dir
$tar xvf /some/dir/proc.gz
$cp /some/dir/.config /your/folio/sources/
Click to expand...
Click to collapse
This didn't work for me I still get the "kernel configuration invalid error"
Could somebody help me
gipposat said:
I used rootstock with only "--seed build-essential", I got a .img file and created a sdcard. Then I have added wifi driver just like this HowTo; I have created a new "/2.6.32.9/build" folder and I copied all "folio kernel source". So I have a running Ubuntu system (only with shell access) but at step 10 when builiding the drivers I have this error:
"config.mk:204: WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m."
FATAL: Could not load /lib/modules/2.6.32.9/modules.dep: No such file or directory.
FATAL: Could not load /lib/modules/2.6.32.9/modules.dep: No such file or directory.
...
What did I do wrong?
Thanks
Click to expand...
Click to collapse
Type "sudo depmod -a" in a console, press enter and voilà.
zoken4 said:
Type "sudo depmod -a"
Click to expand...
Click to collapse
thanks zoken4 that worked like a charm ,
do you have any suggests about the invalid kernel configuration error i mentioned before
Saint9192 said:
thanks zoken4 that worked like a charm ,
do you have any suggests about the invalid kernel configuration error i mentioned before
Click to expand...
Click to collapse
You're welcome.
For the configuration error, you have to run "sudo make oldconfig && make prepare" in "/lib/modules/2.6.32.9/build/".
In a terminal : "cd /lib/modules/2.6.32.9/build/", and then "sudo make oldconfig && make prepare".
You'll maybe also have to run "sudo make scripts" after that.
ok I'll give it a try and report back
Ok I have the same error that all of you...
What are we doing wrong ??????
Solutions ?? ?!
thanks !
Hello I Want to run This File in my phone (via terminal emulator).
but after type ./amxxpc i have error
line 1: syntax error: unexpected "("
how i can fix that?
File witch I Want to start is in scripting.zip
Bump!
cheqolada said:
Hello I Want to run This File in my phone (via terminal emulator).
but after type ./amxxpc i have error
line 1: syntax error: unexpected "("
how i can fix that?
File witch I Want to start is in scripting.zip
Click to expand...
Click to collapse
Not possible.
a) The file is compiled for the wrong architecture and can only be executed on a Intel 386 type machine.
b) The file is linked with the GNU libraries, and can not be executed in the Android (bionic) environment.
You need to solve those two issues by recompiling it for the ARM architecture using the Android bionic libraries.
Try to get source and to compile for your device.
Hi,
I'm trying to build a CM11 ROM for Xperia U just for learning. My PC is a SAMSUNG N150 which has Lubuntu 13.10 Saucy Salamander running on it, I have set it up to compile Android ROMs following this guide , next I've followed munjeni's guide to build a CM11 ROM for Xperia Go but using this repo of CM11 for Xperia U instead of munjeni's one for Xperia Go. When I reach the last step (make otapackage, or in other words, build the ROM) it seems everything is going OK during the process, but after 8 hours working it stops and says:
Code:
make: *** [/home/alberto/cm11/out/target/product/kumquat/obj/EXECUTABLES/recovery_intermediates/extendedcommands.o] Error 1
And when I check $OUT directory there's no .zip package.
I think that "Error 1" can be related to these errors:
Code:
bootable/recovery/extendedcommands.c:567:96: error: 'BOARD_VOLD_SDCARD_VOLUME_INT' undeclared (first use in this function)
bootable/recovery/extendedcommands.c:567:96: note: each undeclared identifier is reported only once for each function it appears in
bootable/recovery/extendedcommands.c:567:126: error: 'BOARD_UMS_LUNFILE' undeclared (first use in this function)
bootable/recovery/extendedcommands.c:569:96: error: 'BOARD_VOLD_SDCARD_VOLUME_EXT' undeclared (first use in this function)
But I don't know how to fix the errors and get a complete build, so I need the help of any developer.
Thank You
Garcia98 said:
Hi,
I'm trying to build a CM11 ROM for Xperia U just for learning. My PC is a SAMSUNG N150 which has Lubuntu 13.10 Saucy Salamander running on it, I have set it up to compile Android ROMs following this guide , next I've followed munjeni's guide to build a CM11 ROM for Xperia Go but using this repo of CM11 for Xperia U instead of munjeni's one for Xperia Go. When I reach the last step (make otapackage, or in other words, build the ROM) it seems everything is going OK during the process, but after 8 hours working it stops and says:
Code:
make: *** [/home/alberto/cm11/out/target/product/kumquat/obj/EXECUTABLES/recovery_intermediates/extendedcommands.o] Error 1
And when I check $OUT directory there's no .zip package.
I think that "Error 1" can be related to these errors:
Code:
bootable/recovery/extendedcommands.c:567:96: error: 'BOARD_VOLD_SDCARD_VOLUME_INT' undeclared (first use in this function)
bootable/recovery/extendedcommands.c:567:96: note: each undeclared identifier is reported only once for each function it appears in
bootable/recovery/extendedcommands.c:567:126: error: 'BOARD_UMS_LUNFILE' undeclared (first use in this function)
bootable/recovery/extendedcommands.c:569:96: error: 'BOARD_VOLD_SDCARD_VOLUME_EXT' undeclared (first use in this function)
But I don't know how to fix the errors and get a complete build, so I need the help of any developer.
Thank You
Click to expand...
Click to collapse
Have you apply the patches ?
95A31 said:
Have you apply the patches ?
Click to expand...
Click to collapse
Yes, but I haven't applied the optional step because I'm not going to sync CM11 source code daily
Garcia98 said:
Yes, but I haven't applied the optional step because I'm not going to sync CM11 source code daily
Click to expand...
Click to collapse
It look like bootable_recovery.patch is not applyed properly. Check for errors about that
95A31 said:
It look like bootable_recovery.patch is not applyed properly. Check for errors about that
Click to expand...
Click to collapse
Thank you, I will try it tomorrow
__________________________________________________________
When I apply bootable_recovery.patch I got this:
Code:
patching file bootable/recovery/Android.mk
patching file bootable/recovery/default_recovery_ui.c
patching file bootable/recovery/extendedcommands.c
[B]Hunk #1 FAILED at 32.[/B]
Hunk #2 succeeded at 169 (offset 6 lines).
Hunk #3 succeeded at 559 (offset 13 lines).
Hunk #4 succeeded at 1518 (offset 42 lines).
Hunk #5 succeeded at 1591 (offset 42 lines).
Hunk #6 succeeded at 1694 with fuzz 2 (offset 54 lines).
[B]1 out of 6 hunks FAILED -- saving rejects to file bootable/recovery/extendedcommands.c.rej[/B]
patching file bootable/recovery/recovery.c
patching file bootable/recovery/recovery_ui.h
patching file bootable/recovery/ui.c
patching file bootable/recovery/adefines.h
patching file bootable/recovery/minui/lucidaconsole_10x18.h
It seems there's one error with hunk #1, any idea about how to fix it?
A bump on this. Getting similar errors while building CM 11. Any help would be appreciated
Thanks,
AJ
Nothing...
Nothing, I cannot fix the errors, I've searched everywhere about how to fix patch errors but without success, when I try with git apply hardware/semc/patches/bootable_recovery.patch it says the following:
Code:
error: patch failed: bootable/recovery/extendedcommands.c:32
error: bootable/recovery/extendedcommands.c: patch doesn't apply
If I knew C, I would try to have a look to extendedcommands.c (I think that file cause the error). I attach here the file.
Garcia98 said:
Nothing, I cannot fix the errors, I've searched everywhere about how to fix patch errors but without success, when I try with git apply hardware/semc/patches/bootable_recovery.patch it says the following:
Code:
error: patch failed: bootable/recovery/extendedcommands.c:32
error: bootable/recovery/extendedcommands.c: patch doesn't apply
If I knew C, I would try to have a look to extendedcommands.c (I think that file cause the error). I attach here the file.
Click to expand...
Click to collapse
Guys try to use this patch https://github.com/95A31/android_hardware_semc/blob/cm-11.0/patches/bootable_recovery.patch. It is a refreshed version of @munjeni one.
95A31 said:
Guys try to use this patch https://github.com/95A31/android_hardware_semc/blob/cm-11.0/patches/bootable_recovery.patch. It is a refreshed version of @munjeni one.
Click to expand...
Click to collapse
Thanks a lot. The patch worked with no errors. Now starting the build
Cheers,
AJ
@95A31 Can you please take a look at this error? http://pastebin.com/AGm8QAdR
EDIT: I guess the error might be due to wrong path specified to toolchain. I am trying again with another path. I'll let youknow how that goes
Thanks
AJ
95A31 said:
Guys try to use this patch https://github.com/95A31/android_hardware_semc/blob/cm-11.0/patches/bootable_recovery.patch. It is a refreshed version of @munjeni one.
Click to expand...
Click to collapse
Thank you very much, patch works fine and I've compiled kernel correctly
But now I get another error, it has stopped building and say this:
Code:
make: *** [/home/alberto/cm11/out/target/common/obj/JAVA_LIBRARIES/framework_intermediates/classes-with-local.dex] Ended (killed)
I cannot find any error in terminal
I've checked $OUT directory and there's no zip, kernel is OK, but in system there are a lot of missing files.
Also I've searched for classes-with-local.dex but I don't find it anywhere, in /JAVA_LIBRARIES/framework_intermediates doesn't appear.
I've checked if all patches were applied correctly and I haven't found anything wrong.
Please I need help (other time )
Garcia98 said:
Thank you very much, patch works fine and I've compiled kernel correctly
But now I get another error, it has stopped building and say this:
Code:
make: *** [/home/alberto/cm11/out/target/common/obj/JAVA_LIBRARIES/framework_intermediates/classes-with-local.dex] Ended (killed)
I cannot find any error in terminal
I've checked $OUT directory and there's no zip, kernel is OK, but in system there are a lot of missing files.
Also I've searched for classes-with-local.dex but I don't find it anywhere, in /JAVA_LIBRARIES/framework_intermediates doesn't appear.
I've checked if all patches were applied correctly and I haven't found anything wrong.
Please I need help (other time )
Click to expand...
Click to collapse
Mh... I can not understand this error. I suggest 1) build CM from scratch 2) Check if you are properly include the
proprietary files
Thanks a lot to your patch. I did encountered some small error but I compiled now successfully. Thanks
Cheers,
AJ
95A31 said:
Mh... I can not understand this error. I suggest 1) build CM from scratch 2) Check proprietary files
Click to expand...
Click to collapse
I will try option 1) whenever I can, it's more simple than option 2)
Anyway thanks
Abhinav2 said:
Thanks a lot to your patch. I did encountered some small error but I compiled now successfully. Thanks
Cheers,
AJ
Click to expand...
Click to collapse
You are welcome
First of all, I didn't modified any file so it seems that it was already downloaded with syntax error. I followed the instructions from here and here when preparing the building environment. When I run make -j8 I got the error:
FAILED: out/target/common/obj/all-event-log-tags.txt
/bin/bash -c "build/tools/merge-event-log-tags.py -o out/target/common/obj/all-event-log-tags.txt frameworks/base/core/java/android/app/admin/SecurityLogTags.logtags frameworks/base/core/java/android/content/EventLogTags.logtags frameworks/base/core/java/android/net/EventLogTags.logtags frameworks/base/core/java/android/speech/tts/EventLogTags.logtags frameworks/base/core/java/android/webkit/EventLogTags.logtags frameworks/base/core/java/com/android/internal/logging/EventLogTags.logtags frameworks/base/packages/SettingsProvider/src/com/android/providers/settings/EventLogTags.logtags frameworks/base/packages/SystemUI/src/com/android/systemui/EventLogTags.logtags frameworks/base/services/core/java/com/android/server/EventLogTags.logtags frameworks/base/services/core/java/com/android/server/am/EventLogTags.logtags frameworks/ex/common/java/com/android/common/GoogleLogTags.logtags frameworks/native/services/surfaceflinger/EventLog/EventLogTags.logtags frameworks/opt/telephony/src/java/com/android/internal/telephony/EventLogTags.logtags packages/apps/QuickSearchBox/src/com/android/quicksearchbox/EventLogTags.logtags packages/apps/Settings/src/com/android/settings/EventLogTags.logtags packages/providers/CalendarProvider/src/com/android/providers/calendar/EventLogTags.logtags packages/providers/ContactsProvider/src/com/android/providers/contacts/EventLogTags.logtags packages/services/Telephony/src/com/android/phone/EventLogTags.logtags system/bt/main/../EventLogTags.logtags system/core/liblog/event.logtags system/core/libsysutils/EventLogTags.logtags system/core/logcat/event.logtags system/core/logd/event.logtags"
File "build/tools/merge-event-log-tags.py", line 51
except getopt.GetoptError, err:
^
SyntaxError: invalid syntax
[ 0% 92/35341] host C++: aapt <= frameworks/base/tools/aapt/Main.cpp
ninja: build stopped: subcommand failed.
16:27:01 ninja failed with: exit status 1
make: *** [build/core/main.mk:21: run_soong_ui] Error 1
#### make failed to build some targets (53 seconds) ####
Click to expand...
Click to collapse
In this merge-event-log-tags.py file, at line 51, it has:
try:
opts, args = getopt.getopt(sys.argv[1:], "ho:m:")
except getopt.GetoptError, err:
print str(err)
print __doc__
sys.exit(2)
Click to expand...
Click to collapse
Also, this is my first time posting here and also first time trying to build android so if you guys need more information to help troubleshoot this, please let me know
fabiotk said:
First of all, I didn't modified any file so it seems that it was already downloaded with syntax error. I followed the instructions from here and here when preparing the building environment. When I run make -j8 I got the error:
In this merge-event-log-tags.py file, at line 51, it has:
Also, this is my first time posting here and also first time trying to build android so if you guys need more information to help troubleshoot this, please let me know
Click to expand...
Click to collapse
I've got this same problem trying to build 8.1.0. Did you (or anyone else) ever figure this out?
http://dpaste.com/0C1QWKE
UnderSampled said:
I've got this same problem trying to build 8.1.0. Did you (or anyone else) ever figure this out?
http://dpaste.com/0C1QWKE
Click to expand...
Click to collapse
Hello, yes, I solved it by making Python2 the default version instead of python3
Code:
sudo ln -sf /usr/bin/python2 /usr/bin/python
please delete
onion4 said:
Hi, I am trying to build AOSP ROM for mido but I have some errors. Here's some output
Code:
No need to regenerate ninja file
[ 0% 1/43168] Ensuring Jack server is installed and started
Jack server already installed in "/home/onion/.jack-server"
Launching Jack server java -XX:MaxJavaStackTraceDepth=-1 -Djava.io.tmpdir=/tmp -Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G -cp /home/onion/.jack-server/launcher.jar com.android.jack.launcher.ServerLauncher
[ 0% 206/43168] AAPT2 link out/target/product/mido/obj/APPS/framework-res_intermediates/package-res.apk
FAILED: out/target/product/mido/obj/APPS/framework-res_intermediates/package-res.apk
/bin/bash out/target/product/mido/obj/APPS/framework-res_intermediates/package-res.apk.rsp
out/target/product/mido/obj/APPS/framework-res_intermediates/flat-res/device/xiaomi/mido/overlay/frameworks/base/core/res/res/values_config.arsc.flat: error: resource bool/config_wifi_hotspot2_enabled does not override an existing resource.
out/target/product/mido/obj/APPS/framework-res_intermediates/flat-res/device/xiaomi/mido/overlay/frameworks/base/core/res/res/values_config.arsc.flat: note: define an <add-resource> tag or use --auto-add-overlay.
error: failed parsing overlays.
[ 0% 207/43168] AAPT2 compile out/target/common/obj/JAVA_LIBRARIES/android-support-compat_intermediates/...rks/support/compat/res/values-fi_strings.arsc.flat <- frameworks/support/compat/res/values-fi/strings.xml
ninja: build stopped: subcommand failed.
18:37:00 ninja failed with: exit status 1
Someone knows how to fix it?
Click to expand...
Click to collapse
i dont have any knowledge related to compiling roms but i do have knowledge about building apps. Something in frameworks/support/compat/res/values-fi/strings.xml titled as values_config.arsc.flathere is not present.
It is suggesting you to define a tag there or to use --auto overlay
Ok, someone knows how to add this flag to aapt?
That overlay has been deprecated in 8.1.
https://github.com/KudProject/device_xiaomi_mido/commit/124b359b8311faf4137e01dd319a88f1006da282
Sent from my Redmi Note 4 using XDA Labs
krasCGQ said:
That overlay has been deprecated in 8.1.
https://github.com/KudProject/device_xiaomi_mido/commit/124b359b8311faf4137e01dd319a88f1006da282
Sent from my Redmi Note 4 using XDA Labs
Click to expand...
Click to collapse
So I will try to use tree that you provided.
onion4 said:
Hi, I am trying to build AOSP ROM for mido but I have some errors. Here's some output
Someone knows how to fix it?
Click to expand...
Click to collapse
Looks like openSSL issue.
storm_99 said:
Looks like openSSL issue.
Click to expand...
Click to collapse
Nope. It's due to a defined overlay that doesn't override default one elsewhere.
Sent from my Redmi Note 4 using XDA Labs
please delete
please delete