Related
Okay, here's the tutorial and downloads for all you x10 mini (e10a) people out there who want to root + debrand + update to 2.1
Here's a link to a vid i made for this procedure and the outcome once done:
http://www.youtube.com/watch?v=JIojWZkraZ0
Here's a link for the software to root your phone and add customisation:
http://forum.xda-developers.com/showpost.php?p=8976947&postcount=1
Here's a link to root Explorer.apk:
http://www.4shared.com/file/IdOkM8of/Root_Explorer_Vs_2102.htm
Here's the link to the claro build.prop file:
http://forum.xda-developers.com/showthread.php?t=820009&page=4
Here's a link to the problem i faced and how i resolved it:
http://forum.xda-developers.com/showthread.php?t=854457
here's a link to sony's update utility:
http://www.sonyericsson.com/cws/sup...eserviceapplication/xperiax10mini?cc=gb&lc=en
procedure:
1. download and extract to you descktop the newest GUI flashtool
2. in your phone go to settings ->applications-> and check unknown sources
3. in settings ->applications-> development-> check usb debugging
4. in you extract flashtool folder that should be on your desktop you will see a flash.bat file, open it to start program.
5. click on root and follow the procedure to start z4root and allow it to root and restart your phone, do not manually restart you phone, z4root will automatically restart your phone for you.
6. once your phone is completly restarted and functional, colse the flash.bat program and re-open it from the extracted program.
7. click on customise and allow it to fully install the applications, it will tell you finished when done.
8. mount your phone's sd card to your pc
9. download the root explorer.apk file from the download link provided and save it on you desktop.
10.copy the root explorer file from your desktop to the root of your sd card (do not put it in any folder)
11. unmount phone to computer
12. you will see on your phone that you have a program called astro, open the program,
13.in astro, navigate to your sd card and install root explorer.apk
14. once installed, exit out of astro
15. mount you phone again to your pc and create a new folder on the root of your sd card called new build, and create another folder called old build.
16. download the two build.prop files supplied in my download link and save it to your pc's desktop.
17. now open the build folder on your desktop and you will see two files, one called build.prop.claro and another called build.prop.vivo.
18.delete the build.prop.vivo file.
19. right click and rename the build.prop.claro file to build.prop (delete the .claro part)
20.drag and drop that file to you new build folder you created on your sd card.
21.unmount your phone from you pc.
22. on your phone, open root eplorer
23. scroll down to SYSTEM
24. find the build.prop file and copy it
25. back out of the SYSTEM folder and scroll down to the SD CARD
26. paste the copied build.prop file to the old build folder you had created on your sd card (its basically a backup in case you ever mess up)
27. now in root explorer, go to you SD CARD and copy the build.prop file from your new build folder that you initially downloaded and renamed.
28. scroll back to SYSTEM and click on the r/w button on the top left of screen
29. then past and overwrite the file
30.now exit out of the program and restart you phone.
31. don't worry if you phone menu system looks kinda wonky or doesn't really work properly once your phone has restarted. just make sure its fully rebooted
32.download and install the sony ericsson update service program from the download link supplied.
33. accept the terms and follow the instructions... (it will ask you to put your phone in recover mode by turning off your phone and pressing the back button while plugging in your phone via usb) you can make this process quicker by simply already having your phone plugged in and simply pressing and holding the top power button+back button+home button until the green light remains on.
34. the program will tell you that there is new software available for your phone
35. install and enjoy 2.5
Extras step to making the experience even better!
i personally don't like the boot animation of the new 2.1 update and would rather not have the claro operator logo at the boot startup. the way to do that is:
root your phone again by following my instructions earlier, and install the root explorer.apk file again from your sd card. once your have root explorer installed and working navigate to SYSTEM and then to MEDIA. in media you will see a bootanimation.zip file, simply delete it.
Now for removing bloatware (operator specific applications):
to remove application that may be of annoyance, just go into root explorer again and navigate to SYSTEM and the to APP and dele and .apk files that are programs like ei: claro.apk... make sure you press the r/w button whenever you want to delete or overwrite something in SYSTEM. And be aware that if you don't know what your doing, you can brick your phone. SO BE CAREFUL!
And finally, as most would already know, this is all at your own risk. Sometimes its better to leave these types of hacks alone if you don't know what your doing.
I take no responsibility or credit for any of these hacks. thanks to all the members on XDA Developers for your support and help.
There are steps to make it simpler ... which is independent of the version they have in the cell (2.1 Uk or other ... 1.6) is achieved by having the American firm ... thus reduce it without diminishing the tutorial: alex0983
1. Planet app install
2. Find and install z4root
3. Permamente root install and follow instructions, the phone will reboot ...
4. In Planet app also find the Root Explorer and install ...
5. Connect the phone and copy the build.pro (Claro) to the SD and disconnect
6. Open root explorer and if I get a message to: super user ... allow him ....
7. mounted R / W. ... go the SD route where the build.prop copy and recopy this time from root explorer and find the path: / system and replace the phone ....
8. Turn off the phone ....
9. Connecting to Seus and select repair ...! and ready ... your phone now is American again! And firmware 2.1
10. To remove things Claro, just make the points 1,2,3,4! then the path / system / media to copy the boot loader found in the forum and in the path / system / app to delete the applications they say. clear (remember to mounted R / W)
I hope you find it useful! And that worked for me! Obviously, thanks to your tutorial alex0983 which also served me as a whole, but I found the quickest way!
Sorry for my bad english!
re:
hey no problem, i'm glad you found it useful. Sorry for the 35+ steps... I just wanted to make it easy to follow for people who had never done something like this before. Just trying to help ppl.
Actually the tutorial is very well prepared but no longer so necessary to the root from the phone! And for that we are in the community to help and facilitate the process to other users!
Kudos for you alex0983 and kloriahdez, thanks for your posts!!!
hi alex,
im stuck at no 22.
when i try to open root explorer, i get:
root explorer has not yet managed to obtain root access. because of issues with superuser, this often happens the first time the app is run but is usually fine from then on.
im new to android phones, that is why im relying on your step by step tutorial. but now im stuck with superuser/root explorer issue
This...
I will take a Xperia X10 mini later (my new phone,now i have widfire, but is tu big ) , i will try to root in this night, let ou guys the results
Good damn!
Work, perfect, but when i wass try to install app2sd after my phone, won t let install any apps, and ...lol no wirless conection Wi Fi , or GSM . ( free space on phone 173 Mb ).
I manage to resolve all with a repair from update , on Zeus ( good luck i wass made this update first ... but i think it can be working for the first update ).
i will try this night again , and i will send results later.
Yes good damn now my phone enter in boot looping ..... on the first boot won t start after that i wass tryng to repair with Sony repair and tell me the soft is still not availlble . How ca i arestore to 2.1 ? i put the build.prop like you write ... and now i can even start my phone. How i can make the old again?
_________________________________
Finaly managed this with flash tools . guys don t try this with already upgraded version to 2.1 ( you will be stuck in boot looping), is god to root, but only this in my case.
Root work.
noob with problem
I'm getting some problems in open the root explorer. The x10 mini is rooted (i run the rom manager without error), but when i run the root maneger, i recive the error "Root explorer has not yet managed to obtain rot acces. /because of issues with superuser, this often happens the first time the app is run but usually fine from then on. /click ok and restart the app to try again. /makesure you respond correctly the superuser prompt". I've got this erro always i open the program. I've reinstall it and the problens still. What i'm doing wrong?
Sorry the bad english, and thx to the help
Hi
I have 2.1 update 1 version
Should this procedure work with this or it won't work
If not, how to root the phone?
I mentioned that kingoldstyle had the same problem. I also updated the phone prior to doing this procedure.
So, maybe kingoldstyle can help me with rooting?
How to use flashing tools?
Thanks.
problems
im stuck ant no 28, whats a r/w button? and when i try to paste the build tells me: you cannot paste here because the file system is read-only. help me please
something strange just happened
on my rooted nook tablet i can't access to google play store
it say "you must add an account to the device to continue. do u want to add an account now"
and when i click on YES it closes everything and goes back on the main screen
and also Gallery - Email - Talk have the same icons with the android logo
is this related to the fact that the software has been updated to the new version 1.4.3?
should i root it again?
thanks a lot
WhiterabbitITA said:
is this related to the fact that the software has been updated to the new version 1.4.3?
Click to expand...
Click to collapse
Yep. Reroot using the sdcard method and everything should go back to normal. A system update breaks root as it modifies the /system/apps/ directory which is where superuser/google play are stored when rooting.
helpppppp
i was trying to reboot using that method
http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
i need help because something went wrong
Instructions:
Download the packages listed in the download folder, and extract them to your desktop.
extract ALL the files from the single zip.
NOTE: Do not extract the .zip with superuser and su.
Open the image flasher .exe, and browse for the .img that you extracted from the same zip
Put your SD Card into your nook or reader, and select the drive letter from the drop down on the right.
Press write, and wait
Once it has completed open the SD Card from the Windows browser and place the .zip in the root of the SD card.
Turn your Nook off.
Turn your Nook on while holding both the N+Power button. Your device will turn on, and then turn off after holding it.
NOTE: Do not let go of either button until your device has powered on and off again.
Put the SD Card into your nook.
NOTE: If it is already in there eject it and then put it back in.
Power your Nook on normally.
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
Select flash update.zip.nothing like that on the menu
i have rebbot system, install zip from sd card and selecting YES goes to Installation aborted
what to do?
Select Select from SD card.
Select your .zip
Reboot device
NOTE: Remove the SD card after your device reboots as if you don't it will continue to boot from the SD card.
I think I'm having this same problem.
WhiterabbitITA said:
i was trying to reboot using that method
http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
i need help because something went wrong
Instructions:
Download the packages listed in the download folder, and extract them to your desktop.
extract ALL the files from the single zip.
NOTE: Do not extract the .zip with superuser and su.
Open the image flasher .exe, and browse for the .img that you extracted from the same zip
Put your SD Card into your nook or reader, and select the drive letter from the drop down on the right.
Press write, and wait
Once it has completed open the SD Card from the Windows browser and place the .zip in the root of the SD card.
Turn your Nook off.
Turn your Nook on while holding both the N+Power button. Your device will turn on, and then turn off after holding it.
NOTE: Do not let go of either button until your device has powered on and off again.
Put the SD Card into your nook.
NOTE: If it is already in there eject it and then put it back in.
Power your Nook on normally.
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
Select flash update.zip.nothing like that on the menu
i have rebbot system, install zip from sd card and selecting YES goes to Installation aborted
what to do?
Select Select from SD card.
Select your .zip
Reboot device
NOTE: Remove the SD card after your device reboots as if you don't it will continue to boot from the SD card.
Click to expand...
Click to collapse
Hopefully, someone can help me with this, as I seem to be having a similar problem. I am familiar with how to root the nook tablet, and have done so already, but since then, I believe the firmware updated, breaking my root. I am afraid to do it again, because when I first rooted the tablet, a game on it didn't work properly, and only worked properly after the update. Will this new root process cause any existing games to stop working? And how do I then prevent future firmware updates from breaking my root, again?
RooterBooter said:
Hopefully, someone can help me with this, as I seem to be having a similar problem. I am familiar with how to root the nook tablet, and have done so already, but since then, I believe the firmware updated, breaking my root. I am afraid to do it again, because when I first rooted the tablet, a game on it didn't work properly, and only worked properly after the update. Will this new root process cause any existing games to stop working? And how do I then prevent future firmware updates from breaking my root, again?
Click to expand...
Click to collapse
simple answer for avoising breaking root is to install a custom rom
Sent from my Nook Tablet CM7 BETA using xda premium app
RooterBooter said:
Hopefully, someone can help me with this, as I seem to be having a similar problem. I am familiar with how to root the nook tablet, and have done so already, but since then, I believe the firmware updated, breaking my root. I am afraid to do it again, because when I first rooted the tablet, a game on it didn't work properly, and only worked properly after the update. Will this new root process cause any existing games to stop working? And how do I then prevent future firmware updates from breaking my root, again?
Click to expand...
Click to collapse
or install custom recovery (cwm) if you wish to continue to use stock
without stock recovery B&N can't send you updates
How do I tell if I'm using stock recovery or custom recovery?
tobdaryl said:
or install custom recovery (cwm) if you wish to continue to use stock
without stock recovery B&N can't send you updates
Click to expand...
Click to collapse
I used Albert Wertz's method for rooting using an sd card, and had no problems, except that I didn't go as far as to block the OTA updates. Is it possible to have a custom recovery and stock recovery on the same device? How do I tell, and how do I safely install cwm, without being able to use Titanium Backup (since my root is now broken)?
deleted because of multiple posts linked.
I have now booted into mac instead of ubuntu in an attempt to fix.
Looks as if I got caught in xda update!
It's still not correct but better now.
WhiterabbitITA said:
i was trying to reboot using that method
http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
i need help because something went wrong
Instructions:
Download the packages listed in the download folder, and extract them to your desktop.
extract ALL the files from the single zip.
NOTE: Do not extract the .zip with superuser and su.
Open the image flasher .exe, and browse for the .img that you extracted from the same zip
Put your SD Card into your nook or reader, and select the drive letter from the drop down on the right.
Press write, and wait
Once it has completed open the SD Card from the Windows browser and place the .zip in the root of the SD card.
Turn your Nook off.
Turn your Nook on while holding both the N+Power button. Your device will turn on, and then turn off after holding it.
NOTE: Do not let go of either button until your device has powered on and off again.
Put the SD Card into your nook.
NOTE: If it is already in there eject it and then put it back in.
Power your Nook on normally.
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
Select flash update.zip.nothing like that on the menu
i have rebbot system, install zip from sd card and selecting YES goes to Installation aborted
what to do?
Select Select from SD card.
Select your .zip
Reboot device
NOTE: Remove the SD card after your device reboots as if you don't it will continue to boot from the SD card.
Click to expand...
Click to collapse
From main menu (first screen after cardboard box)
select - install zip from sdcard
next -
select - apply /sdcard/update.zip
next -
N down and select YES
---------- Post added 15th August 2012 at 12:16 AM ---------- Previous post was 14th August 2012 at 11:36 PM ----------
RooterBooter said:
I used Albert Wertz's method for rooting using an sd card, and had no problems, except that I didn't go as far as to block the OTA updates. Is it possible to have a custom recovery and stock recovery on the same device? How do I tell, and how do I safely install cwm, without being able to use Titanium Backup (since my root is now broken)?
Click to expand...
Click to collapse
No, there is one partition designated for recovery. You can run cwm from sdcard when you wish and keep stock recovery internal, but custom recovery is the only way I have seen that absolutely blocks otas (otas are blocked with custom rom also) if that is your concern. To tell about your recovery the only thing I can think of is the power and N key into recovery. If you read what is presented on the screen when it appears and refuse a reset you are safe, that takes care of stock, if you are nervous reread and take your time. For cwm if that is installed you will see a cardboard box flash and then a menu with the first item to reboot, that is also safe.
To get into either recovery (for looking) from power off press and hold power and N, after two seconds release power, after one or two more seconds release N also. That should do it.
If you wish to have absolutely what to click when you get stock recovery just wait a while and I'll come back and edit this post to reflect that info. At the moment have something else going on (NT) I can't stop.
Stock recovery shows Factory reset
do you want to reset your device to the factory default?
Press POWER key to exit
Press Home key to continue
press power and you are out and safe
Installing CWM recovery! There are now two apps(they require root) here on xda for that purpose, one is 16gig only (Nook Tab Recovery Flasher) by indirect the other is 8gig and I don't know who did it.
There are also flash zips for each and a flash zip that is both 8gig and 16gig. If you are 8gig make sure you choose one for 8gig
CWM sdcard with a flash zip does not require root.
So after trying multiple times to update my tablet an failing everytime. I checked the last_log file in /cache/recovery and found out that the reason the update was failing because I've deleted Netflix.apk from /system/app.
Since I did not backup the application I had no way to use the OTA, however after a few hours research I found out a method to completely restore the system to stock.
Part 1: Restoring Tablet to Stock
1. Download the system dump that matches your current software:
9.4.2.28
WW - http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/WW_epaduser9_4_2_28UpdateLauncher.zip - MD5 - 68D41197B399967B7F6789E47683A0D7
US - http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/US_epaduser9_4_2_28UpdateLauncher.zip - MD5 - DF17D3129378E9A7F81C58AF7BF5396B
TW - http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/TW_epaduser9_4_2_28UpdateLauncher.zip- MD5 - 3999B0E052211AA53ED1DB5D06A02AD3
2. Unzip the compressed firmware file to the root directory of a MicroSD card (external). Only extract this once so your sdcard should look something like this:
/MicroSD/US_epad-user-9.4.2.28.zip
3.With your Transformer turned on, insert the MicroSD into the MicroSD card slot.
4. An exclamation mark should appear in the notification area.
5. Tap the mark and proceed with the update.
6. Your tablet should now reboot and proceed to update the tablet, if you get an error try redownloading the update and trying again.
Part 2: Rooting your Tablet
Voodoo root keeper didn't save my root after part 1, so to root it I used Debugfs automated root:
http://forum.xda-developers.com/showthread.php?t=1706588
After your tablet is rooted you should use OTA root keeper to backup your root.
Part 3: Manual Update to Jellybean
1.Download the dlpkgfile for your system, I uploaded the US file: <--------------- US ONLY don't try if your tablet is not on US firmware, it might brick
http://www.mediafire.com/?ddcl3k233kxsvv8
WW version dlpkgfile <--------------- WW ONLY don't try if your tablet is not on WW firmware, it might brick
The WW update file (thanks for kikistans for uploading):
http://dropbox.com/s/uiui6ha6hrg2mg1/dlpkgfile
http://www.mediafire.com/download.php?kzr30e1vufbgee9
2. Place the dlpkgfile on your tablet's storage, MAKE SURE THE dlpkgfile does not have a .zip extension, the file has no extension!
3. Download ES File manager and go to settings>root settings and tick all the boxes.
4. Copy dlpkgfile to /cache
5. Go to /cache/recovery and create a new file named command
6. Open the file as a text and place the following code in it and save:
--update_package=/cache/dlpkgfile
7. Turn off the tablet
8. Press and hold volume down+power until the tablet vibrates then release power and keep holding volume down
9 When a text shows on the boot logo screen release volume down and click volume up
10. The tablet should now start updating, it'll take about 30 minutes and once the tablet boots you'll have jellybean
11. Restore root with root keeper
This method should work for everyone with a locked bootloader:good:
Edit:
Sorry I've been busy, it seems like some people are missing 3 files, follow this thread if you're missing those files:
http://forum.xda-developers.com/showthread.php?t=1909820
Also some people are reporting that their tablet is get bricked, MAKE SURE THAT YOU'RE USING THE RIGHT FIRMWARE UPGRADE
new-tilus has reported that this method worked for his stock unlocked tablet.
I used the last part more our less. Ota rootkeeper claims I have root. But I don't. Photocopier still keeps root access, but I cannot gain any new root access.
Sent from my SAMSUNG-SGH-I717 using xda premium
It doesnt work for me. Im on .28 stock WW version. It starts but then appears android with red trangle
lukcinek said:
It doesnt work for me. Im on .28 stock WW version. It starts but then appears android with red trangle
Click to expand...
Click to collapse
Same here, no success for me either...
Didn't work
Sent from my Transformer Prime TF201 using xda premium
Do we really need to go thru the hardship? Isn't ASUS going to fix it?
I think it must be noted that the OTA update for a WW variant will not work on a US variant, a DE will not work on TW and so on. The SKU for the OTA must match the SKU of the Prime in question.
It works. It doesnt befor becouse I didnt delete .bin from name of the file
Uh, fix what? ASUS is in the business of doing firmware updates for stock + unlocked devices.
Spidey01 said:
Uh, fix what? ASUS is in the business of doing firmware updates for stock + unlocked devices.
Click to expand...
Click to collapse
It seems to work here, I did exactly what "Protato" wrote and it's been loading the new JB for more than 10 minutes and no triangle yet
It worked I am on JB 4.1.1, forllow the instructions "literally" and it will work!
by far the simplest instructions to follow
i was having the same issue as most of you, i was (stock) rooted and applied the OTA update. i did have OTA root keeper, but my update failed and i lost root. i did a factory reset of 9.4.2.28 (US version) after a backup, then i rooted using DebugfsRoot_Generic. i more or less performed part 3 of this thread although i had to add three missing files to /system/xbin/ (maybe if i would have applied the stock 9.4.2.28 file i could have skipped this step). i forgot to restore my backup before i applied the update so i lost root. updating and keeping root may require SuperSU instead of SuperUser, from what i read last night. i hope this helps, thanx to all the people out there, especially @Wipeout and @Trekest from the post below, as well as @sparkym2 for Debugfs and @1wayjonny for Universal Naked Driver 0.7 and @Protato. good luck, i wish this thread was around yesterday evening, it would have saved me hours...
missing files from the below thread post #111
http://forum.xda-developers.com/showthread.php?t=1907804&page=12
Got red triangle, will try again.
work for me! thanks
Anybody remember how to have Flash working again.
For me it works on default browser, but it's not working anymore on Boat Browser.
I saw a thread this morning, but now I can't remember where it is.
Thanks if any link will be passed here.
1. Downloaded US version (mine is US build) - checked MD5 version to be the same.
2. Extracted once and copied the .zip to the root of external memory card.
3. Upgrade file detected - proceed with upgrade
4. Reboot. Then progress bar for upgrade.
5. Device started with a message that upgrade process completed. I am still seeing 4.0.3
Sorry posted too early.. still need to follow step 2 & 3.
-----------------------
*** PERFECT ***
All steps worked EXACTLY as explained in OP :good:. I am running JB now. Even I managed to restore root explained. Thanks you very much !!!
Thanks for this! I applied steps 1 through 3 and no problems updating to Jelly Bean! Although I protected root. I lost root after update:/ Oh well. small price to pay for Jelly Bean!
ES file explorer will not allow copy of needed file.
bimbobo said:
It seems to work here, I did exactly what "Protato" wrote and it's been loading the new JB for more than 10 minutes and no triangle yet
It worked I am on JB 4.1.1, forllow the instructions "literally" and it will work!
Click to expand...
Click to collapse
Can't get Es file ex. to allow me to copy the file to the cache folder, says copy failed? Any suggestions?
sly.cooper said:
1. Downloaded US version (mine is US build) - checked MD5 version to be the same.
2. Extracted once and copied the .zip to the root of external memory card.
3. Upgrade file detected - proceed with upgrade
4. Reboot. Then progress bar for upgrade.
5. Device started with a message that upgrade process completed. I am still seeing 4.0.3
Sorry posted too early.. still need to follow step 2 & 3.
Click to expand...
Click to collapse
Yeah, this happened to be too.
Battery is too drained now. Charging and will try again when I have enough juice.
StephanBotha said:
Yeah, this happened to be too.
Battery is too drained now. Charging and will try again when I have enough juice.
Click to expand...
Click to collapse
You still need steps 2 and 3
still got red andy. everything worked up until that.
Protato said:
So after trying multiple times to update my tablet an failing everytime. I checked the last_log file in /cache/recovery and found out that the reason the update was failing because I've deleted Netflix.apk from /system/app.
Since I did not backup the application I had no way to use the OTA, however after a few hours research I found out a method to completely restore the system to stock.
Part 1: Restoring Tablet to Stock
1. Download the system dump that matches your current software:
9.4.2.28
WW - http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/WW_epaduser9_4_2_28UpdateLauncher.zip - MD5 - 68D41197B399967B7F6789E47683A0D7
US - http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/US_epaduser9_4_2_28UpdateLauncher.zip - MD5 - DF17D3129378E9A7F81C58AF7BF5396B
TW - http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/TW_epaduser9_4_2_28UpdateLauncher.zip- MD5 - 3999B0E052211AA53ED1DB5D06A02AD3
2. Unzip the compressed firmware file to the root directory of a MicroSD card (external). Only extract this once so your sdcard should look something like this:
/MicroSD/US_epad-user-9.4.2.28.zip
3.With your Transformer turned on, insert the MicroSD into the MicroSD card slot.
4. An exclamation mark should appear in the notification area.
5. Tap the mark and proceed with the update.
6. Your tablet should now reboot and proceed to update the tablet, if you get an error try redownloading the update and trying again.
Part 2: Rooting your Tablet
Voodoo root keeper didn't save my root after part 1, so to root it I used Debugfs automated root:
http://forum.xda-developers.com/showthread.php?t=1706588
After your tablet is rooted you should use OTA root keeper to backup your root.
Part 3: Manual Update to Jellybean
1.Download the dlpkgfile for your system, I uploaded the US file:
http://www.mediafire.com/?ddcl3k233kxsvv8
2. Place the dlpkgfile on your tablet's storage.
3. Download ES File manager and go to settings>root settings and tick all the boxes.
4. Copy dlpkgfile to /cache
5. Go to /cache/recovery and create a new file named command
6. Open the file as a text and place the following code in it and save:
--update_package=/cache/dlpkgfile
7. Turn off the tablet
8. Press and hold volume down+power until the tablet vibrates then release power and keep holding volume down
9 When a text shows on the boot logo screen release volume down and click volume up
10. The tablet should now start updating, it'll take about 30 minutes and once the tablet boots you'll have jellybean
11. Restore root with root keeper
This method should work for everyone with a locked bootloader:good:
Click to expand...
Click to collapse
still got red andy, followed instructions to the tee!
I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Thank You DAVI FELICANO and deej_roamer for their help. I have now successfully rooted my phone. If someone else has a problem, go to Page 2 for the solution.
You can use the defalt method, dont need to change anything.
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
DAVI FELICIANO said:
You can use the defalt method, dont need to change anything.
Click to expand...
Click to collapse
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
I know friend. I was talking about games like asphalt 8 and dead trigger which have data of size 1.5 gb because of which I wanted to root my phone. Thank you for the advice.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
5zan said:
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
If you read my post correctly then that's what I have written.
5zan said:
You can install only one gphone and due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
I know friend. Thats why in this post I asked how to root the phone and not how to install games on sd card. Thanks.
Harsh862 said:
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
Click to expand...
Click to collapse
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
DAVI FELICIANO said:
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
Click to expand...
Click to collapse
Ok. Thank you friend. I will reply if I face any problem. Thank you again.
Any idea of rooting the device without unlocking BL...thnx in advance
Sent from my XT1022 using XDA Premium 4 mobile app
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Harsh862 said:
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Click to expand...
Click to collapse
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Urgent help needed
Harsh862 said:
I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Click to expand...
Click to collapse
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
problem successfully resolved
Harsh862 said:
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Click to expand...
Click to collapse
Thanks harsh862....it really helped a lot..,. Really thanks
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
Is your recovery.img placed in the "C:\Program Files (x86)\Minimal ADB and Fastboot"?
It need to placed in it or you'll get an error.
Boot loader is LOCKED !! cannot be unlocked !! so no root for me ?
Your comprehensive guide to rooting the NC5 and fixing it if/when something goes wrong
To start out I found it very time consuming to find the 'right' information on rooting the NC5 or that it wasn't possible. So I went on the mission to see if i get what was out in the wild to work.
Well I figured it out and I hope this helps!
Step One: Charge your phone! In the event we need to use Odin to fix a boot-loop/soft-brick.
Step Two: Check your version number. As the title suggests this method is only for Verizon Galaxy S4 NC5!
(ENABLE USB DEBUGGING AND UNKNOWN SOURCES IN SETTINGS BEFORE PROCEEDING)
Step Three: Time to download the tools we will need to get this done. Place these files on your SD card. This is the only time you will need your computer. CLICK IT> ONE STOP SHOP
Towel Root: Okay, this is version 1 of the app. I know there are newer versions but they don't work and this does so use it. Select and install. Open the app and select 'make it rain', your phone will reboot and base root has been achieved!
Super User: Select and install. Open the app and install the SU binary at the prompt. The app will also ask to disable KNOX, if you do the app might hang. Home button out and try again after a reboot. Eventually it will work though a bit funky at times.
Safe Strap: Select and install. Open the app and select 'install recovery'. After it installs reboot to the recovery by selecting 'reboot to recovery'. When the recovery loads select the backup option and make a backup!
This is our recovery and allows nandroid backups(you should have done this) and flashing of safestrap ROMs. The bootloader is locked on this phone so no flashing of CM11 or any custom kernels. Do some research before you start flashing things!
Well that was easy! Now you have a rooted and safestrapped NC5 S4!
FAQ\INFO
This recovery is BETA and does not support ROM slots. Everything must be done on the STOCK slot. MAKE A BACKUP!
Nandroid backup and restore is working completely with this recovery!
If you remove Samsung Hub auto rotation will break. Attached is the library file that fixes this. Extract libgnustl_shared.so from the attached zip. Copy and paste to System\Lib and change permission to rw-r--r--. I use Root Explorer, though not free is a very good file manager. There are free alternatives on Google Play.
CREDITS DUE!
HASHCODES< Safe Strap!
CHAINFIRE< Super SU!
GEOHOT< Towel Root!
Thank you for your work. But I have a few major points to address with this:
1. There is a newer, stable SAFESTRAP out (3.75), this one also supports ROM slots, and doesn't corrupt the Non-HLOS Partition.
2. Version 3 of TowelRoot is out, and alot more stable/clean than Version 1.
3. SAFESTRAP really should be installed after busybox is installed, which you did not recommend.
The Samsung Hub Auto Rotation bug is a very nice find though! Thank you for that.
Hey thank you! I will update accordingly.
However TowelRootv3 would not root my phone. I tried changing the strings, the app just states the phone isn't supported.