HTC One Max Rebooting after hk-3.sh.zip install - HTC One Max
My Name is Kiran Kotian
My HTC One Max was rooted & S-Off with Super CID 11111111
My HTC One Max original Details
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.61.707.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA3C4WG02224
(bootloader) imei: 357312050086469
(bootloader) meid: 00000000000000
(bootloader) product: t6u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: 0P3P60000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3738mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
hboot Detasils as follows :
T6U PVT SHIP S-OFF RH
CID-11111111
HBOOT-2.49.0000
QSC-
OS-4.13.707.7
eMMC-boot 2048MB
Jun 1 2015,15:40:33.0
Was operating on Stock Rom 'Stock_Rooted_T6UL_4.13.401.7'
Then i installed hk-3.sh.zip using cmd console via FastBoot
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
The phone rebooted & Showed Android optimising 1 of 232 apps.
then after a certian apps were optimised, the phone remained in that mode overnight.
then rebooting the phone, now the phone is going into a reboot loop after the HTC One Screen.
Tried various method to get my phone back from this semi bricked state.
installed TWRP recovery and restored 2.61.707.1 Stock ROM Unrooted - 2014-06-17--17-34-28 KOT49H release-keys
then installed firmaware T6_UL_L50_MR_hTC_Asia_WWE_3.14.707.3(stock HBOOT, Recovery, System etc)
Then using stock Recovery 3.14.707.3, applied following OTAs:
OTA_T6_UL_L50_MR_hTC_Asia_WWE_3.14.707.3_2.61.707.1.zip
OTA_T6_UL_L50_MR_hTC_Asia_WWE_3.23.707.1-3.14.707.3.zip
OTA_T6_UL_L50_MR_hTC_Asia_WWE_4.13.707.7-3.23.707.1.zip
All OTAs upgraded perfectly in Recovery mode, but my phone still reboots in loop after HTC ONE Screen.
Have noted the following Abnormalities during Firmware ugrades;
start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-4] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-4,0
(bootloader) [RUU]UZ,sbl1-4,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-5] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-5,0
(bootloader) [RUU]UZ,sbl1-5,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
-----------------------------------
snap shot as under :
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[boot] unzipping & flushing...
(bootloader) [RUU]UZ,boot,0
(bootloader) [RUU]UZ,boot,14
(bootloader) [RUU]UZ,boot,24
(bootloader) [RUU]UZ,boot,34
(bootloader) [RUU]UZ,boot,46
(bootloader) [RUU]UZ,boot,57
(bootloader) [RUU]UZ,boot,67
(bootloader) [RUU]UZ,boot,80
(bootloader) [RUU]UZ,boot,92
(bootloader) [RUU]UZ,boot,100
(bootloader) [RUU]WP,boot,0
(bootloader) [RUU]WP,boot,99
(bootloader) [RUU]WP,boot,100
(bootloader) ...... Successful
(bootloader) start image[hboot] unzipping & flushing...
(bootloader) [RUU]UZ,hboot,0
(bootloader) [RUU]UZ,hboot,50
(bootloader) [RUU]UZ,hboot,100
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
(bootloader) start image[recovery] unzipping & flushing...
(bootloader) [RUU]UZ,recovery,0
(bootloader) [RUU]UZ,recovery,6
(bootloader) [RUU]UZ,recovery,13
(bootloader) [RUU]UZ,recovery,20
(bootloader) [RUU]UZ,recovery,27
(bootloader) [RUU]UZ,recovery,33
(bootloader) [RUU]UZ,recovery,38
(bootloader) [RUU]UZ,recovery,51
(bootloader) [RUU]UZ,recovery,58
(bootloader) [RUU]UZ,recovery,65
(bootloader) [RUU]UZ,recovery,72
(bootloader) [RUU]UZ,recovery,80
(bootloader) [RUU]UZ,recovery,86
(bootloader) [RUU]UZ,recovery,92
(bootloader) [RUU]UZ,recovery,99
(bootloader) [RUU]UZ,recovery,100
(bootloader) [RUU]WP,recovery,0
(bootloader) [RUU]WP,recovery,99
(bootloader) [RUU]WP,recovery,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-4] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-4,0
(bootloader) [RUU]UZ,sbl1-4,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-5] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-5,0
(bootloader) [RUU]UZ,sbl1-5,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl2,0
(bootloader) [RUU]UZ,sbl2,100
(bootloader) [RUU]WP,sbl2,0
(bootloader) [RUU]WP,sbl2,100
(bootloader) ...... Successful
(bootloader) start image[sbl3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl3,0
(bootloader) [RUU]UZ,sbl3,100
(bootloader) [RUU]WP,sbl3,0
(bootloader) [RUU]WP,sbl3,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,99
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[wcnss] unzipping & flushing...
(bootloader) [RUU]UZ,wcnss,0
(bootloader) [RUU]UZ,wcnss,45
(bootloader) [RUU]UZ,wcnss,88
(bootloader) [RUU]UZ,wcnss,100
(bootloader) [RUU]WP,wcnss,0
(bootloader) [RUU]WP,wcnss,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,6
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,28
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,59
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,80
(bootloader) [RUU]UZ,radio,87
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,99
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]WP,rcdata,0
(bootloader) ...... Successful
OKAY [ 23.758s]
finished. total time: 26.721s
My Phone current info is as follows:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.13.707.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA3C4WG02224
(bootloader) imei: 357312050086469
(bootloader) meid: 00000000000000
(bootloader) product: t6u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: 0P3P52000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4295mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d0e3b226
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Please, need Urgent Help to resolve this issue and get my HTC One Max to Normal.
Try install again with twrp, and I bellive you need to wipe data before installing this one. You need a rom on your phone to dirtyflash over, but wipe data before that.
Now My HTC One Max T6U appears bricked.
jaypeg123 said:
Try install again with twrp, and I bellive you need to wipe data before installing this one. You need a rom on your phone to dirtyflash over, but wipe data before that.
Click to expand...
Click to collapse
Sorry, Now I am in bigger problem,
I flashed a Ruu of a HTC Sprint M7 model and now my HTC One Max T6U appears hard bricked;
does not turn on, No Blinking lights when Vol + Power buttons are held
adb devices shows
List of devices attached
fastboot devices shows
???????????? fastboot
After fastboot oem rebootRUU,
fastboot flash zip firmware.zip shows
< waiting for device >
Disconnecting & re-connecting devices does not help.
Now if if Hold Vol+Power butoons and Hard reset the phone then it shows
target reported max download size of 452980736 bytes
sending 'zip' (47960 KB)...
OKAY [ 1.937s]
writing 'zip'...
FAILED (remote: not allowed)
fastboot oem writecid 11111111 command shows
...
(bootloader) Start Verify: -1
(bootloader) Input CID is super CID
(bootloader) Start Verify: -1
OKAY [ 0.079s]
finished. total time: 0.081s
which proves that phone is actually alive in fasboot & fastboot oem mode.
fastboot update OTA_T6_UL_2.61.707.1-3.14.707.3.zip shows
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Suspect bootloader is locked.
fastboot oem get_identifier_token shows
...
(bootloader)
(bootloader) < Please cut following message >
(bootloader) <<<< Identifier Token Start >>>>
(bootloader) 24CF21A32FF8D12F3461275B677157F8
(bootloader) 5FA173DC0612A7E216C1DC7989001579
(bootloader) 01FA1B42C244B988DC03CEAF791513FE
(bootloader) 09A3F36E21A48FADA8C7F43885C93E67
(bootloader) F6AB794A2249EEA180F419685C9F3435
(bootloader) 35CE9EECF4987FD29D588A4E1E88993C
(bootloader) 2B25F9EAE09193BE48DAABCEDA21B913
(bootloader) C288AF1B3824E057C6CA4AC2C8316C17
(bootloader) 8E891BDBE3A0EE95941D24AA53F3419D
(bootloader) 698FC89A496F41A3C38DDA40DAB44622
(bootloader) 0426A24BB1381523D933D970326222CA
(bootloader) A9585D275EAEA7FF6EA7B1F71D735703
(bootloader) 230F4FD7F7A1BCD6F40490F7555A92FD
(bootloader) 52BFCA9983AEB1BA13C1DB7282645968
(bootloader) 12535FF5959B7A83789CD41ACBA5F4CA
(bootloader) E78497EE64D77812520D98ADCAB537F8
(bootloader) <<<<< Identifier Token End >>>>>
OKAY [ 0.008s]
finished. total time: 0.008s
but
when this above token is pasted at htc dev unlock token area and submitted,
following error is displayed:
Unlocking Bootloader Failed!
Error Code: 154.
Error Reason: Token Information not complete (SN).
fastboot getvar all shows
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3535mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-371c4f408e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.037s
Please help me solve this problem. Thanks
How to Re-Partition HTC One Max T6U and RAW Flash Android ?
Is anybody aware of a method How to re-partition my HTC One Max T6U and then RAW Flash / Install Android images into those partitions ?
(Probably like how Mobile companies do after the Hardware of a Phone is just assembled & ready for Android to be installed on it for the very first time).
Did it realy go through flashing the m7 ruu? Does it not do a device check?
jaypeg123 said:
Did it realy go through flashing the m7 ruu? Does it not do a device check?
Click to expand...
Click to collapse
Actually I had modified the android-info.txt file in the RUU.zip to match my device model Id & CID. That's why the flashing went through.
Also had deleted the assert entries in the META-INF/com/google/android file, to prevent errors and then the impending abort.
First gave a .txt extension to the META-INF/com/google/android file and then deleted all the assert entries. Then again removed the .txt extension.
example of the assert entries as follows :
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" , "HTC__001" , "HTC__E11" ,
"HTC__203" , "HTC__102" , "HTC__405" , "HTC__Y13" , "HTC__A07" ,
"HTC__304" , "HTC__M27" , "HTC__032" ,
"HTC__016") == "t");
. . . and many more . . .
You set the bar high for us, cant beat this one
jaypeg123 said:
You set the bar high for us, cant beat this one
Click to expand...
Click to collapse
There are ways to flash the partitions of HTC devices using Linux (Ubuntu) where the SIM, Memory Card & Battery of the device has to be removed first, & then the device has to be flashed. I am now trying to do some R&D on that. Linux by default is able to see the partitions of Android (because Android is also based on Linux) and the partitions in the emmc are formatted as ext3.
Only problem I am facing right now is that I cannot physically disconnect the battery of my HTC One Max as it has a non-removable battery which is also embedded very deep within the phone. Am not aware of disconnecting the battery any other way. Now since the battery is connected, every time I connect my phone to the PC, the bootloader (hboot) comes into action and thus blocks any attempt to flash software into the existing partitions.
Will post any findings if I manage to break the ice.
Thanks for your help though.
Related
Is my Evo 3D with HBOOT 1.04 S-OFF worth anything?
Well let me say..I haven't worried at all about bootloaders since I've declined all OTA updates pretty much and have flashed stock ROMs, radios, etc. from XDA only. Anyway it's an ENG (Engineering) bootloader with extended fastboot commands. List here. http://dl.xda-developers.com/attach.../2/8/8/7/EVO3D_Extended_Fastboot_Commands.txt ..I have used practically none of those..but I don't know if they would be useful to some developer for..something. It's from this old thread here... http://forum.xda-developers.com/showthread.php?t=1192306 Anyone have any input if this has any value to anyone (since I know a lot of HBOOT 1.5 owners are feeling the pain)? Just curious.
dzap said: Well let me say..I haven't worried at all about bootloaders since I've declined all OTA updates pretty much and have flashed stock ROMs, radios, etc. from XDA only. Anyway it's an ENG (Engineering) bootloader with extended fastboot commands. List here. http://dl.xda-developers.com/attach.../2/8/8/7/EVO3D_Extended_Fastboot_Commands.txt ..I have used practically none of those..but I don't know if they would be useful to some developer for..something. It's from this old thread here... http://forum.xda-developers.com/showthread.php?t=1192306 Anyone have any input if this has any value to anyone (since I know a lot of HBOOT 1.5 owners are feeling the pain)? Just curious. Click to expand... Click to collapse Capitalism relies on two simple market principles: supply and demand. You're already indicating there isn't very much supply be hinting at the hboot 1.5 owners who aren't able to duplicate this process and load the eng hboot. The second part of this equation would be the demand. Demand remains to be seen how much demand there is at different price points. I think there is a XDA board for posting devices for sale. A post up there would probably help give you a rough gauage for the current demand at specific pricing points for this type of device. Another method to feel out the demand would be to post on either eBay or Swappa. Those two markets would also allow you to see current demand at specific price points. For the average user, I don't think the eng hboot adds *significant* value over the HTC unlock method. This is definitely a niche market though and as such, it sometimes only takes one person who reallly wants it and is willing to pay. Hope that helps fill in a few gaps!
Thanks joeykrim. Yeah I took Econ 101..I know how supply and demand works. This is mostly a niche market. Trust me..I would have updated my HBOOT a long time ago if I felt it wasn't worth anything. I just want to sell it to a developer (even if I fell it's at a loss), if I feel it may help them crack HBOOT 1.5 for any reason whatsoever. I know about 99.9% of regular people do not care. Which is why I posted here hoping some developer might be interested in some way, I'm absolutely in no immediate rush to sell my phone since it's value has tanked significantly in a 6-month period of ownership. So if anyone finds this thread a couple months down the path...then PM me and I might still have it for you. I'd only rather sell it at a loss if I knew it would be put to good use. Also seems the extended fastboot link may have been disabled..so here's it is C&P... C:\android\tools>fastboot oem ? ... (bootloader) command list (bootloader) mb (bootloader) mh (bootloader) mw (bootloader) ew (bootloader) eh (bootloader) eb (bootloader) mmu (bootloader) ram_test (bootloader) jump (bootloader) test (bootloader) sdtest (bootloader) eraseconfig (bootloader) writeconfig (bootloader) readconfig (bootloader) writesku (bootloader) readsku (bootloader) rflash (bootloader) tflash (bootloader) block_test (bootloader) partition_test (bootloader) rbchk (bootloader) erasesd (bootloader) btrouter (bootloader) tick (bootloader) heaptable (bootloader) sysinfo (bootloader) emapi (bootloader) emapiTest (bootloader) emapiCountryID (bootloader) emapiWlanMac (bootloader) emapiSetDefCal (bootloader) emapiReadCal (bootloader) lr (bootloader) imgcrc (bootloader) resetautoimage (bootloader) resetpreferdiag (bootloader) resetRUUflag (bootloader) writeserialno (bootloader) readserialno (bootloader) battcheck (bootloader) enter (bootloader) gotofastboot (bootloader) gotohboot (bootloader) writemid (bootloader) usbtestmode (bootloader) eraseWifiFlash (bootloader) erase (bootloader) readmbserialno (bootloader) listpartition (bootloader) erasebcid (bootloader) writebcid (bootloader) readbcid (bootloader) fmrouter (bootloader) fmtx (bootloader) resetuP (bootloader) bdaddress (bootloader) readbdaddr (bootloader) wMfgTp (bootloader) rMfgTp (bootloader) emptypagecheck (bootloader) saveprt2sd (bootloader) savemem2sd (bootloader) savefb2sd (bootloader) emapiInit (bootloader) emapiChannel (bootloader) emapiBand (bootloader) emapiRate (bootloader) emapiRateset (bootloader) emapiCountry (bootloader) emapiTXpwr1 (bootloader) emapiPkteng_start (bootloader) emapiPkteng_stop (bootloader) emapiOut (bootloader) emapiFqacurcy (bootloader) emapiCrsuprs (bootloader) emapiUp (bootloader) emapiDown (bootloader) emapiMpc (bootloader) emapiCounters (bootloader) emapiVersion (bootloader) emapiEtheraddr (bootloader) emapinRate (bootloader) emapiSetIrqPin (bootloader) usblog (bootloader) bkflash2emmc (bootloader) fl (bootloader) loaddiag (bootloader) lnb (bootloader) init_a1026_fw (bootloader) checkKeyCard (bootloader) loopback (bootloader) spitest (bootloader) i2ctest (bootloader) pmic8058_led_test (bootloader) gpiow (bootloader) gpior (bootloader) clock (bootloader) i2cr (bootloader) i2cw (bootloader) i2ctest (bootloader) ulpi (bootloader) changeCid (bootloader) read_l2_acc_fuse (bootloader) emmc_boot (bootloader) poweron (bootloader) poweroff (bootloader) setvol (bootloader) spi (bootloader) fat (bootloader) pmgpiow (bootloader) pmgpior (bootloader) 8058vregon (bootloader) 8058vregoff (bootloader) 8058vregw (bootloader) 8058vregr (bootloader) 8901vregon (bootloader) 8901vregoff (bootloader) 8901vregw (bootloader) 8901vregr (bootloader) 8x60i2cr (bootloader) 8x60i2crNoAddr (bootloader) 8x60i2cwNoAddr (bootloader) 8x60i2cw (bootloader) mipi_test (bootloader) chargeron (bootloader) chargeroff (bootloader) adc (bootloader) readsimlocktype (bootloader) enablesimlock (bootloader) addsimlockcode (bootloader) clearsimlockcode (bootloader) listsimlockcode (bootloader) clearunlockrecord (bootloader) lite_heap_test (bootloader) vibrate_test (bootloader) getrtc (bootloader) setrtc (bootloader) getrtcalarm (bootloader) setrtcalarm (bootloader) pgfs (bootloader) bumpclk (bootloader) acpuclk_get (bootloader) acpuclk_set (bootloader) rpmclk_set (bootloader) rpmclk_get (bootloader) oschalt (bootloader) tz_req (bootloader) blow_efuse (bootloader) enable_hw_auth (bootloader) disable_jtag (bootloader) blow_boot_cfg (bootloader) lock_secboot (bootloader) blow_sec_key (bootloader) hide_hwkey (bootloader) dump_tzlog (bootloader) fdisk_emmc (bootloader) set_partition_emmc (bootloader) erase_emmc (bootloader) test_emmc (bootloader) sector_erase_emmc (bootloader) fat_format_emmc (bootloader) init_emmc (bootloader) reinit_emmc (bootloader) write_mmc (bootloader) set_wp_emmc (bootloader) write_prot_test (bootloader) clear_wp_emmc (bootloader) set_enh_area_emmc (bootloader) wimaxinfo (bootloader) wimaxuart (bootloader) wimaxid (bootloader) wimaxcmd (bootloader) wimaxhelp (bootloader) wimaxrmac (bootloader) wimaxpower (bootloader) wimaxinit (bootloader) wimaxwmac (bootloader) wimaxdelca (bootloader) wimaxdelcb (bootloader) wimaxerase (bootloader) wimaxbackupcb (bootloader) wimaxbackupmac (bootloader) wimaxrestorecb (bootloader) wimaxverifycb (bootloader) keytest (bootloader) heap (bootloader) boot (bootloader) reset (bootloader) powerdown (bootloader) rebootRUU (bootloader) heap_test (bootloader) rtask (bootloader) task (bootloader) enableqxdm (bootloader) gencheckpt (bootloader) readpid (bootloader) writepid (bootloader) readcid (bootloader) writecid (bootloader) readimei (bootloader) writeimei (bootloader) readsecureflag (bootloader) writesecureflag (bootloader) list_partition_emmc (bootloader) load_emmc (bootloader) check_emmc (bootloader) check_emmc_mid (bootloader) read_mmc (bootloader) load_modem_emmc (bootloader) get_wp_info_emmc (bootloader) send_wp_info_emmc (bootloader) get_ext_csd_emmc (bootloader) get_sector_info_emmc OKAY [ 0.218s] finished. total time: 0.218s Click to expand... Click to collapse
my DX's Model ID is blank ?
i have a DX and i tried up some RÓMs But now i can't boot my phone and it has vibrated 7 times when i turned on / boot to bootloader I relocked bootloader I install RUU.zip but it had error sending 'zip' (375648 KB)... OKAY [ 35.104s] writing 'zip'... (bootloader) adopting the signature contained in this image... (bootloader) signature checking... (bootloader) rom parsing start ... (bootloader) rom parsing finish ... (bootloader) zip header checking... (bootloader) zip info parsing... (bootloader) checking model ID... FAILED (remote: 41 model id check fail) finished. total time: 107.404s Click to expand... Click to collapse i checked var and here is (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 1.00.000.0 (bootloader) version-misc: UNKNOWN SHIP S-ON (bootloader) serialno: u+næg"öa6ü?¡S+? (bootloader) imei: 358835 (bootloader) meid: (bootloader) product: proto (bootloader) platform: HBOOT-8225 (bootloader) modelid: ¦ò£e¦˜ªñ(Éè·-Q-~=¼-Q)¼=p±/ `oj\± (bootloader) cidnum: HTC__044 (bootloader) battery-status: good (bootloader) battery-voltage: 0mV (bootloader) partition-layout: HTC (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: RUU (bootloader) commitno-bootloader: dirty-f3c065d3 (bootloader) hbootpreupdate: 12 (bootloader) gencheckpt: 0 all: Done! finished. total time: 0.009s Click to expand... Click to collapse My serial and model id is invalid and now i can't unlock bootloader. please help me
Sorry dude. It most probably is bricked. I had same problem and only fix was another motherboard. Sent from my HTC Desire X using XDA Free mobile app
my DX's Model ID is blank ?
i have a DX and i tried up some RÓMs But now i can't boot my phone and it has vibrated 7 times when i turned on / boot to bootloader I relocked bootloader I install RUU.zip but it had error sending 'zip' (375648 KB)... OKAY [ 35.104s] writing 'zip'... (bootloader) adopting the signature contained in this image... (bootloader) signature checking... (bootloader) rom parsing start ... (bootloader) rom parsing finish ... (bootloader) zip header checking... (bootloader) zip info parsing... (bootloader) checking model ID... FAILED (remote: 41 model id check fail) finished. total time: 107.404s Click to expand... Click to collapse i checked var and here is (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 1.00.000.0 (bootloader) version-misc: UNKNOWN SHIP S-ON (bootloader) serialno: u+næg"öa6ü?¡S+? (bootloader) imei: 358835045727473 (bootloader) meid: (bootloader) product: proto (bootloader) platform: HBOOT-8225 (bootloader) modelid: ¦ò£e¦˜ªñ(Éè·-Q-~=¼-Q)¼=p±/ `oj\± (bootloader) cidnum: HTC__044 (bootloader) battery-status: good (bootloader) battery-voltage: 0mV (bootloader) partition-layout: HTC (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: RUU (bootloader) commitno-bootloader: dirty-f3c065d3 (bootloader) hbootpreupdate: 12 (bootloader) gencheckpt: 0 all: Done! finished. total time: 0.009s Click to expand... Click to collapse My serial and model id is invalid and now i can't unlock bootloader. please help me
Help Me (HTC Desire 820Q Dualsim)
Hello I Have a HTC Desire 820Q Bootloader Unlocked The device keep restarting and low response when I checked it . a software issue I get the stock firmware zip file 0PF6IMG_A50_DTUL_K44_DESIRE_SENSE60_hTC_Asia_India _1.01.720.2_Radio_01.01.010_U1030433_08.01.1017_re lease_398545_combined_signed by jamesjerss.zip and I tried to flash it by Fastboot command after but the device in RUU mode give me this error: target reported max download size of 16777216 bytes Invalid sparse file format at header magi and fastboot.exe crashes and I tried to flash it by Recovery when selecting (apply from SDCard) and press the power button the device write the following: Check cid failed! --Invalid operation--" Then immediately reboot into OS The Device Variables : (bootloader) version: 0.5 (bootloader) version-bootloader: 3.19.0.0000 (bootloader) version-baseband: 01.01.010_U1030481_08.01.1216 (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 1.03.425.10 (bootloader) version-misc: PVT SHIP S-ON (bootloader) serialno: HT543YB00810 (bootloader) imei: 355718060326392 (bootloader) imei2: 355718060326400 (bootloader) meid: 00000000000000 (bootloader) product: a50_dtul (bootloader) platform: hTCBmsm8916 (bootloader) modelid: 0PF610000 (bootloader) cidnum: HTC__059 (bootloader) battery-status: good (bootloader) battery-voltage: 0mV (bootloader) partition-layout: Generic (bootloader) security: on (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: 4df77307 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 (bootloader) mfg-name: Please Help MEE !!
Stuck on fastboot with relocked bootloader (S-off)
(bootloader) version: 0.5 (bootloader) version-bootloader: 3.19.0.0000 (bootloader) version-baseband: [email protected] (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 6.20.502.5 (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: HT515SF****** (bootloader) imei: 352************ (bootloader) imei2: Not Support (bootloader) meid: 00000000000000 (bootloader) product: m8_wlv (bootloader) platform: hTCBmsm8974 (bootloader) modelid: 0P6B12000 (bootloader) cidnum: 11111111 (bootloader) battery-status: good (bootloader) battery-voltage: 0mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: 205bdca3 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 all: Done! when i install RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502.5_combined getting error 155 also tried https://www.youtube.com/watch?v=qfCxKnhJzfA sending 'zip'... (53965 KB) OKAY sending time = 3.053 secs writing 'zip'... (bootloader) zip header checking... (bootloader) shift signature_size for header checking... (bootloader) zip info parsing... (bootloader) checking model ID... (bootloader) checking custom ID... (bootloader) start image[hboot] unzipping for pre-update check... (bootloader) start image[hboot] flushing... (bootloader) [RUU]WP,hboot,0 (bootloader) [RUU]WP,hboot,99 (bootloader) [RUU]WP,hboot,100 (bootloader) ...... Successful FAIL90 hboot pre-update! please flush image again immediately FAILED (remote: 90 hboot pre-update! please flush image again immediately) For "hboot-preupdate" response, restart the same procedure for device HT515SF31765... sending 'zip'... (53965 KB) OKAY sending time = 3.072 secs writing 'zip'... (bootloader) zip header checking... (bootloader) shift signature_size for header checking... (bootloader) zip info parsing... (bootloader) checking model ID... (bootloader) checking custom ID... (bootloader) total_image_number=17 (bootloader) start image[sp1] unzipping & flushing... (bootloader) [RUU]UZ,sp1,0 (bootloader) [RUU]UZ,sp1,99 (bootloader) [RUU]UZ,sp1,100 (bootloader) [RUU]WP,sp1,0 (bootloader) [RUU]WP,sp1,100 (bootloader) ...... Successful (bootloader) current_image_number=0 (bootloader) start image[tz] unzipping & flushing... (bootloader) [RUU]UZ,tz,0 (bootloader) [RUU]UZ,tz,100 (bootloader) [RUU]WP,tz,0 (bootloader) [RUU]WP,tz,100 (bootloader) ...... Successful (bootloader) current_image_number=1 (bootloader) start image[rpm] unzipping & flushing... (bootloader) [RUU]UZ,rpm,0 (bootloader) [RUU]UZ,rpm,100 (bootloader) [RUU]WP,rpm,0 (bootloader) [RUU]WP,rpm,100 (bootloader) ...... Successful (bootloader) current_image_number=2 (bootloader) start image[adsp] unzipping & flushing... (bootloader) [RUU]UZ,adsp,0 (bootloader) [RUU]UZ,adsp,10 (bootloader) [RUU]UZ,adsp,21 (bootloader) [RUU]UZ,adsp,33 (bootloader) [RUU]UZ,adsp,43 (bootloader) [RUU]UZ,adsp,54 (bootloader) [RUU]UZ,adsp,65 (bootloader) [RUU]UZ,adsp,76 (bootloader) [RUU]UZ,adsp,88 (bootloader) [RUU]UZ,adsp,98 (bootloader) [RUU]UZ,adsp,100 (bootloader) [RUU]WP,adsp,0 (bootloader) [RUU]WP,adsp,100 (bootloader) ...... Successful (bootloader) current_image_number=3 (bootloader) start image[pg2fs_spcustom] unzipping & flushing... (bootloader) [RUU]UZ,pg2fs_spcustom,0 (bootloader) [RUU]UZ,pg2fs_spcustom,38 (bootloader) [RUU]UZ,pg2fs_spcustom,99 (bootloader) [RUU]UZ,pg2fs_spcustom,100 (bootloader) ...... Successful (bootloader) current_image_number=4 (bootloader) start image[wcnss] unzipping & flushing... (bootloader) [RUU]UZ,wcnss,0 (bootloader) [RUU]UZ,wcnss,22 (bootloader) [RUU]UZ,wcnss,46 (bootloader) [RUU]UZ,wcnss,68 (bootloader) [RUU]UZ,wcnss,98 (bootloader) [RUU]UZ,wcnss,100 (bootloader) [RUU]WP,wcnss,0 (bootloader) [RUU]WP,wcnss,100 (bootloader) ...... Successful (bootloader) current_image_number=5 (bootloader) start image[tp] unzipping & flushing... (bootloader) [RUU]UZ,tp,0 (bootloader) [RUU]UZ,tp,100 (bootloader) ..... Bypassed (bootloader) current_image_number=6 (bootloader) start image[tp] unzipping & flushing... (bootloader) [RUU]UZ,tp,0 (bootloader) [RUU]UZ,tp,100 (bootloader) ..... Bypassed (bootloader) current_image_number=7 (bootloader) start image[sensor_hub] unzipping & flushing... (bootloader) [RUU]UZ,sensor_hub,0 (bootloader) [RUU]UZ,sensor_hub,100 (bootloader) [RUU]WP,sensor_hub,0 (bootloader) [RUU]WP,sensor_hub,4 (bootloader) [RUU]WP,sensor_hub,8 (bootloader) [RUU]WP,sensor_hub,12 (bootloader) [RUU]WP,sensor_hub,16 (bootloader) [RUU]WP,sensor_hub,20 (bootloader) [RUU]WP,sensor_hub,24 (bootloader) [RUU]WP,sensor_hub,28 (bootloader) [RUU]WP,sensor_hub,32 (bootloader) [RUU]WP,sensor_hub,36 (bootloader) [RUU]WP,sensor_hub,40 (bootloader) [RUU]WP,sensor_hub,44 (bootloader) [RUU]WP,sensor_hub,48 (bootloader) [RUU]WP,sensor_hub,52 (bootloader) [RUU]WP,sensor_hub,56 (bootloader) [RUU]WP,sensor_hub,60 (bootloader) [RUU]WP,sensor_hub,64 (bootloader) [RUU]WP,sensor_hub,68 (bootloader) [RUU]WP,sensor_hub,72 (bootloader) [RUU]WP,sensor_hub,76 (bootloader) [RUU]WP,sensor_hub,80 (bootloader) [RUU]WP,sensor_hub,84 (bootloader) [RUU]WP,sensor_hub,88 (bootloader) [RUU]WP,sensor_hub,92 (bootloader) [RUU]WP,sensor_hub,96 (bootloader) [RUU]WP,sensor_hub,100 (bootloader) ...... Successful (bootloader) current_image_number=8 (bootloader) start image[sdi] unzipping & flushing... (bootloader) ...... Successful (bootloader) current_image_number=9 (bootloader) start image[sbl1] unzipping & flushing... (bootloader) signature checking... (bootloader) verified fail (bootloader) ..... Bypassed (bootloader) current_image_number=10 (bootloader) start image[sbl1] unzipping & flushing... (bootloader) signature checking... (bootloader) ...... Successful (bootloader) current_image_number=11 (bootloader) start image[sbl1] unzipping & flushing... (bootloader) signature checking... (bootloader) verified fail (bootloader) ..... Bypassed (bootloader) current_image_number=12 (bootloader) start image[recovery] unzipping & flushing... (bootloader) ...... Successful (bootloader) current_image_number=13 (bootloader) start image[boot] unzipping & flushing... (bootloader) ...... Successful (bootloader) current_image_number=14 (bootloader) start image[radio] unzipping & flushing... (bootloader) trying to rename MBA (bootloader) ...... Successful (bootloader) current_image_number=15 (bootloader) start image[rcdata] unzipping & flushing... (bootloader) ...... Successful (bootloader) current_image_number=16 OKAY sending 'zip'... (549729 KB) OKAY sending time = 22.653 secs writing 'zip'... FAILproject does not have sa key to decrypt rom FAILED (remote: project does not have sa key to decrypt rom) Execution time is 88(s) i cant access to recovery when i try to flash twrp target reported max download size of 1826422784 bytes sending 'recovery' (20022 KB)... OKAY [ 2.143s] writing 'recovery'... FAILED (remote: not allowed) finished. total time: 2.159s
jerilmg said: (bootloader) product: m8_wlv Click to expand... Click to collapse The above means you have the Verizon version of the M8. Are you intentionally trying to convert it to AT&T? Or did you misunderstand what version of the M8 you had? Either way, you can NOT run the AT&T RUU on this device. It's not compatible, and doing so will result in a radio brick and possible permanent damage. The following means the damage at least has been partially done (AT&T firmware installed): jerilmg said: (bootloader) version-main: 6.20.502.5 Click to expand... Click to collapse You can try to run the Verizon RUU from here: https://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845 But you will need to change back to the Verizon MID, on order for the correct RUU to install: https://forum.xda-developers.com/showthread.php?t=2708581 However, you need adb access to change the MID (as well as root). And that can be a problem in the current state. The user on the following thread is stuck in a very similar situation, where I am trying to help him (see Post #11 and on): https://forum.xda-developers.com/htc-one-m8/help/ruu-flash-t3744631/page2 Not sure this is a recoverable situation. The MID should never have been changed to the AT&T one.
redpoint73 said: The above means you have the Verizon version of the M8. Are you intentionally trying to convert it to AT&T? Or did you misunderstand what version of the M8 you had? Either way, you can NOT run the AT&T RUU on this device. It's not compatible, and doing so will result in a radio brick and possible permanent damage. The following means the damage at least has been partially done (AT&T firmware installed): You can try to run the Verizon RUU from here: https://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845 But you will need to change back to the Verizon MID, on order for the correct RUU to install: https://forum.xda-developers.com/showthread.php?t=2708581 However, you need adb access to change the MID (as well as root). And that can be a problem in the current state. The user on the following thread is stuck in a very similar situation, where I am trying to help him (see Post #11 and on): https://forum.xda-developers.com/htc-one-m8/help/ruu-flash-t3744631/page2 Not sure this is a recoverable situation. The MID should never have been changed to the AT&T one. Click to expand... Click to collapse Already fixed with MID text edit Thanks
jerilmg said: Already fixed with MID text edit Thanks Click to expand... Click to collapse How about posting some details on how exactly you did that, as it would probably help the fellow in the other thread that I mentioned?
1.Download any Kitkat version of RUU.zip 2.Open RUU.zip and you can see a text file in it 3. Open text file with notpad and edit MID and save it (which one you earlier changed) mine verizon changed to At&t (OPB620000 to OPB621000) 4 place edited RUU.zip to sd card after rename. It will flash without fail then upgrade to marshmallow
jerilmg said: 1.Download any Kitkat version of RUU.zip Click to expand... Click to collapse By "any" I assume you mean Kitkat RUUs for Verizon M8.
Yez . Verizon rom