Hey..
Before asking for help let me tell you the whole story 1st, my device was working like charm..
It was Rooted ( i followed this instruction to get Root access ), having PhilZ recovery ( got this from here )..
I removed bloatwares and unwanted apps etc, made some tweaks using Xposed and some directly, replaced bootanimation still device was working fine after this I export it as Custom ROM.
Problem comes here when I was restoring Custom ROM i got Bootloop ( stuck on 1st LG logo ), I guess I forgot to Wipe Dalvik Cache..
I tried following solutions:
- Boot in to Recovery Mode, tried almost every combination but no to avail.
- Flash Stock Firmware but there is no flash files available on internet.
There is a guy on lgbbs.com who have .kdz ( link for f430l's .kdz ) it's paid content, I have not Paypal or any other source to buy.
- Tried in local market but there is no one who can help me.
- Now I want to get into Recovery Mode using ADB but I am facing following problem.
Please check out the attached pictures, hope so you'll get the point (remember device is in bootloop position).
Install PDANET for windows
Get into philz recovery
connect the phone to pc
rename the rom to ROM.zip
copy to adb folder
now put the following command
adb push ROM.zip /sdcard/ROM.zip
Now install from internal sdcard
hit thanx if i helped you
I found this
http://main.develoid.com:81/lg/
LGF430LAT-00-V10a-LGU-KR-AUG-16-2014+0.tot
Is the file you would want. Tots are another form of LG stock software. You'd need the LG Flashtool for it. Might need to find a dll file for it, if it's not included in the zip. I have no way to test if it's the correct file, but is free to download and most people wouldn't go through all the trouble to upload 2 GB files if it wasn't a working one. Good luck.
hafizadv said:
Install PDANET for windows
Get into philz recovery
connect the phone to pc
rename the rom to ROM.zip
copy to adb folder
now put the following command
adb push ROM.zip /sdcard/ROM.zip
Now install from internal sdcard
hit thanx if i helped you
Click to expand...
Click to collapse
Thanks alot.. PDANET doesn't work for me, anyway now Allhmdullilah my device is back into work..
es0tericcha0s said:
I found this
http://main.develoid.com:81/lg/
LGF430LAT-00-V10a-LGU-KR-AUG-16-2014+0.tot
Is the file you would want. Tots are another form of LG stock software. You'd need the LG Flashtool for it. Might need to find a dll file for it, if it's not included in the zip. I have no way to test if it's the correct file, but is free to download and most people wouldn't go through all the trouble to upload 2 GB files if it wasn't a working one. Good luck.
Click to expand...
Click to collapse
Bundle of Thanks.. I really need this one too.. because I can't stop myself to mess with my device, it will help me next time..
Some One Got DLL For F430L?
Thanks Anticipation
shoaibrao said:
Some One Got DLL For F430L?
Thanks Anticipation
Click to expand...
Click to collapse
Does the device have download mode? Try by tuning it off, holding both volume buttons and then plugging the usb cable. If yes, download lg mobile support tool and try from there.
TheFagulousFag said:
Does the device have download mode? Try by tuning it off, holding both volume buttons and then plugging the usb cable. If yes, download lg mobile support tool and try from there.
Click to expand...
Click to collapse
Sir Its Alive Hang On Logo
Can Some One Help Me For KDZ Or TOT+DLL
Thanks Anticipation
shoaibrao said:
Sir Its Alive Hang On Logo
Can Some One Help Me For KDZ Or TOT+DLL
Thanks Anticipation
Click to expand...
Click to collapse
here's the .kdz
https://drive.google.com/file/d/0BxBs2ZTyHoQ1UWdIUl80b25PeUE/view?pref=2&pli=1
password: lgviet.com
Related
My bro accidentally clicked on OTA upgrade. I have bootloader unlocked , rooted P765 with cwm 6.0.2. I searched this forum for solutions and got some.Unfortunately none worked for me.
http://forum.xda-developers.com/showthread.php?t=2247371 - this method did not work . my phone also has some issues with USB i guess. Everytime i connect to pc , i get device not detected error. screes attached.
http://forum.xda-developers.com/showpost.php?p=40423549&postcount=2 ----this did not work. same as above.
i also tried with exitrecovery.zip . It ran successfully from CWM but everytime i boot, phone still goes to CWM recovery mode.
exitrecovery has following code
busybox echo -ne "\066" | busybox dd bs=1 seek=4107 count=1 conv=notrunc of=/dev/block/mmcblk0p8
I did trial and error with mmcblk0p till 1-20 with no success.
Here comes the saddest part...I also went to LG service centre. He also couldn't help.That guy told me motherboard is dead due to rooting.
I am sure that my p765 is very much alive.
I can go to Software upgrade mode on my phone, but my pc doesnt recognize it. I have latest LG drivers installed on my system.
NOw i think only way out of this could be a script to flash from CWM. Please help me!!.
I tried flashing other roms like Superlumina,Avatar. Also tried Ubuntu touch with no success. Still goes to CWM.
I am on JB India V20A.
Thanks in advance.
screen of device not detected. I have LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1 on my system.
Acharyavijeth said:
My bro accidentally clicked on OTA upgrade. I have bootloader unlocked , rooted P765 with cwm 6.0.2. I searched this forum for solutions and got some.Unfortunately none worked for me.
http://forum.xda-developers.com/showthread.php?t=2247371 - this method did not work . my phone also has some issues with USB i guess. Everytime i connect to pc , i get device not detected error. screes attached.
http://forum.xda-developers.com/showpost.php?p=40423549&postcount=2 ----this did not work. same as above.
i also tried with exitrecovery.zip . It ran successfully from CWM but everytime i boot, phone still goes to CWM recovery mode.
exitrecovery has following code
busybox echo -ne "\066" | busybox dd bs=1 seek=4107 count=1 conv=notrunc of=/dev/block/mmcblk0p8
I did trial and error with mmcblk0p till 1-20 with no success.
Here comes the saddest part...I also went to LG service centre. He also couldn't help.That guy told me motherboard is dead due to rooting.
I am sure that my p765 is very much alive.
I can go to Software upgrade mode on my phone, but my pc doesnt recognize it. I have latest LG drivers installed on my system.
NOw i think only way out of this could be a script to flash from CWM. Please help me!!.
I tried flashing other roms like Superlumina,Avatar. Also tried Ubuntu touch with no success. Still goes to CWM.
I am on JB India V20A.
Thanks in advance.
Click to expand...
Click to collapse
Try to disable your LG drivers and do the flash again via S/W Upgrade mode. . .I want to see if that will work. Let me know.
Nathan.7118391 said:
Try to disable your LG drivers and do the flash again via S/W Upgrade mode. . .I want to see if that will work. Let me know.
Click to expand...
Click to collapse
Same pop up...'USB Device not recognized' . LG user support tool shows 'Waiting for connection'
Sorry one more thing, reboot your computer then disable then try.
Sent from my LG-P769(v20f) using the xda-developers app. Hit the thanks bottom, makes me feel good!
Nathan.7118391 said:
Sorry one more thing, reboot your computer then disable then try.
Sent from my LG-P769(v20f) using the xda-developers app. Hit the thanks bottom, makes me feel good!
Click to expand...
Click to collapse
uninstalled it, rebooted it...same error....
Acharyavijeth said:
uninstalled it, rebooted it...same error....
Click to expand...
Click to collapse
Darn! Sorry brother, looks like you are going to have to go the LONG way around. ICS u-boot and x-loader worked for me.
http://forum.xda-developers.com/showpost.php?p=44325657&postcount=4&nocache=1&z=6862240654882044
Nathan.7118391 said:
Darn! Sorry brother, looks like you are going to have to go the LONG way around. ICS u-boot and x-loader worked for me.
http://forum.xda-developers.com/showpost.php?p=44325657&postcount=4&nocache=1&z=6862240654882044
Click to expand...
Click to collapse
:crying: any scripts like exitrecovery to flash?? dying here seeing the state of my phone!
edit
You need to install fastboot drivers: http://forum.xda-developers.com/show....php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable.
'This' link is broken... u have the files brother?
SOLVED
I connected my phone in Software upgrade mode. Same error pop up- USB device not recognised.
Selected 'Options' from LG User support tool and clicked 'Update recovery'. Entered my mobiles serial number.
AFter around 3 hours of download, my device is detected on my system!!! I seriously did not do anything on my system.
AFter the download was complete, the update was installed. My P765 is BACK!!!!
:laugh::good:
Acharyavijeth said:
SOLVED
I connected my phone in Software upgrade mode. Same error pop up- USB device not recognised.
Selected 'Options' from LG User support tool and clicked 'Update recovery'. Entered my mobiles serial number.
AFter around 3 hours of download, my device is detected on my system!!! I seriously did not do anything on my system.
AFter the download was complete, the update was installed. My P765 is BACK!!!!
:laugh::good:
Click to expand...
Click to collapse
Glad you solved it.
I was making a cwm zip for you to flash the stock recovery, but I got carried away helping a couple of other people. Lol, I found the zip I made, and I was like, I know I made this for someone
Your phone was trying to go into the stock recovery to complete the update.
Sent from my LGMS769 using xda app-developers app
kuma82 said:
Glad you solved it.
I was making a cwm zip for you to flash the stock recovery, but I got carried away helping a couple of other people. Lol, I found the zip I made, and I was like, I know I made this for someone
Your phone was trying to go into the stock recovery to complete the update.
Sent from my LGMS769 using xda app-developers app
Click to expand...
Click to collapse
I guess it was trying to load the stock recovery.
kuma82 said:
Glad you solved it.
I was making a cwm zip for you to flash the stock recovery, but I got carried away helping a couple of other people. Lol, I found the zip I made, and I was like, I know I made this for someone
Your phone was trying to go into the stock recovery to complete the update.
Sent from my LGMS769 using xda app-developers app
Click to expand...
Click to collapse
I'm a new member to this forum. Need your help.
My P765 got stuck up with CWM recovery after an OTA update. I flashed some custom rom's but still it does end up in CWM recovery only.
Could you please upload the CWM zip to flash the stock recovery. So that I can get to back to my P765.
I have been searching in all the forum. Finally found this to get solution. Thanks in advance
Kothan8426 said:
I'm a new member to this forum. Need your help.
My P765 got stuck up with CWM recovery after an OTA update. I flashed some custom rom's but still it does end up in CWM recovery only.
Could you please upload the CWM zip to flash the stock recovery. So that I can get to back to my P765.
I have been searching in all the forum. Finally found this to get solution. Thanks in advance
Click to expand...
Click to collapse
The following will work with all OTA boot loops to recovery. The guide is for p765 but it will work with all variants. If you flashed a custom ROM trying to fix the problem, please restore your stock rom backup. Also, if you still have artas182x locked bootloader recovery (or you removed any system apps), the update will fail, but you will be of the loop
what kdz are you currently on? I made the zip but i need the extracted p765 recovery.img.
If you have the kdz please extract the recovery.img (look at my signature on how to extract it).
i could give you the p760 20b recovery.img but I think it would be best to use the recovery.img of the current kdz you are on (to be on the safe side).
Note: if this doesn't work, you will need to use the unoffical fastboot. So you might want to get fastboot setup before trying this. Actually, you probably won't need fastboot, but you will need to restore your custom recovery.
Or use the longer method (takes more time, depends on your download speed), LG mobile support tool.
Once you get the stock recovery.img for your kdz, Open the p765_stock_recovery.zip and copy the 3-recovery.img into the zip file.
Note: Don't change the name of the recovery.img or it will not work
The recovery must be named 3-recovery.img
Place it on you sdcard and flash with cwm and reboot.
Or sideload into your phone with cwm and your computer
Code:
adb sideload p765_stock_recovery.zip
kuma82 said:
what kdz are you currently on? I made the zip but i need the extracted p765 recovery.img.
If you have the kdz please extract the recovery.img (look at my signature on how to extract it).
i could give you the p760 20b recovery.img but I think it will be best if give me the recovery.img of the current kdz you are on (to be on the safe side).
Click to expand...
Click to collapse
wow...this is a great post...i think this will definitely help...:good:
Acharyavijeth said:
SOLVED
I connected my phone in Software upgrade mode. Same error pop up- USB device not recognised.
Selected 'Options' from LG User support tool and clicked 'Update recovery'. Entered my mobiles serial number.
AFter around 3 hours of download, my device is detected on my system!!! I seriously did not do anything on my system.
AFter the download was complete, the update was installed. My P765 is BACK!!!!
:laugh::good:
Click to expand...
Click to collapse
i was follow this step, but still error
my device still black screen, cant power on
OnePlus 2 MEGA UNBRICK GUIDES​I've been looking for OnePlus 2 unbrick guides (Detailed, With working links) recently & came out with 2 best guides out there.
These guides are Well explained with working Download links to every necessary files (So I don't need to make a guide here). Use any guide below to recover your OPT.
https://forums.oneplus.net/threads/updated-29-03-2016-mega-unbrick-guide-for-a-hard-bricked-oneplus-2.347607/
https://forums.oneplus.net/threads/guide-stock-users-soft-bricked-hard-bricked-devices-after-3-0-2-update.449640/
I take no Responsibility as I didn't make those guides (Just pointed them).
Credits :- Naman Bhalla & Gaurav Rohilla @ OnePlus Fourms, Me (For pointing them)
Tested on my OnePlus 2 (A2001)
Press :good: Thanks! if I helped​
my idiot little brother accidentally wiped everything....i can only boot in orange twrp recovery(hydrogen os version)..but there is nothing to back to recover from or zip file to flash from....
so i tried to adb push zip file and adb sideload rom but it says...device not found
how can i repair my phone guys...big help needed
when i fastboot..the device is recognized but when i adb push device not found...help guys...
my idiot little brother accidentally wiped everything....i can only boot in orange twrp recovery(hydrogen os version)..but there is nothing to back to recover from or zip file to flash from....
so i tried to adb push zip file and adb sideload rom but it says...device not found
how can i repair my phone guys...big help needed
when i fastboot..the device is recognized but when i adb push device not found...help guys...
Click to expand...
Click to collapse
You need to install drivers correctly. Try this ---> http://www.technobuzz.net/oneplus-two-usb-drivers/
B!Gguy said:
You need to install drivers correctly. Try this ---> http://www.technobuzz.net/oneplus-two-usb-drivers/
Click to expand...
Click to collapse
i can't turn on the phone..so how will the pc show it in the device manager?
i can only get to the fastboot mode...to recovery option....
the phone is fully wiped...please help me
i can't turn on the phone..so how will the pc show it in the device manager?
i can only get to the fastboot mode...to recovery option....
the phone is fully wiped...please help me
Click to expand...
Click to collapse
You don't have to turn on the phone (only need fastboot mode). Install ADB and Fastboot drivers correctly. Connect phone in fastboot mode. Sideload rom zip file or push zip file to sdcard & flash it via recovery.
Hi everyone guys,I'm from Dubai.United Arab Emirates. I'm in trouble.
Maybe i bricked my phone.
I Rooted it, installed TWRP, and then i updated it not with the TWRP.
Since then i have got a bootloop issue, stuck with the Honor logo.
I can access the BOOTLOADER and the stock recovery (i tried to wipe and reset the phone here, but it do all the things and don't solve the problem) and ERecovery (same here i've got an error)
Try to put an update firmware on the MicroSD and make it run but didn't do anything, what can i do
U sure its a bootloop? First boot after update can make about 30 minutes. Anyways Flash stock recovery and try the update with the SDcard.
Demian3112 said:
U sure its a bootloop? First boot after update can make about 30 minutes. Anyways Flash stock recovery and try the update with the SDcard.
Click to expand...
Click to collapse
yes I'm sure its bootloop...
Please tell me how to I can flash stock recovery.how can I update it..
So to clarify you flashed your stock recovery, put your extracted stock firmware on your external sd card under \dload. Then you entered recovery and installed the local update and it did not work?
jonsama585 said:
So to clarify you flashed your stock recovery, put your extracted stock firmware on your external sd card under \dload. Then you entered recovery and installed the local update and it did not work?
Click to expand...
Click to collapse
I'm don't try this.
can u give me this stock recovery download link
What's the exact model ? KIW-L21C432 ?
You don't need the stock recovery, just plug the charger, then the phone will boot on erecovery (second/alternate recovery)
You need the full ROM though, not an update.
If it's a KIW-L21C432, here is the stock ROMs:
KIW-L21 B140
KIW-L21 B330
unzip the dload folder, put it on you sdcard, then bot with the three buttons pressed.
mooms said:
What's the exact model ? KIW-L21C432 ?
You don't need the stock recovery, just plug the charger, then the phone will boot on erecovery (second/alternate recovery)
You need the full ROM though, not an update.
If it's a KIW-L21C432, here is the stock ROMs:
KIW-L21 B140
KIW-L21 B330
unzip the dload folder, put it on you sdcard, then bot with the three buttons pressed.
Click to expand...
Click to collapse
After plug in charger its showing fastboot&rescue mode.
Arobase40 said:
Look at the hihonor website of your country and search for any firmware you could find for your device...
EDIT : you could try to get this one :
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c185b130-middle-east-stock-t3408202
Click to expand...
Click to collapse
Thanks..but please tell me how to reflash it???
Thank you arobase for helping this guy out
jonsama585 said:
Thank you arobase for helping this guy out
Click to expand...
Click to collapse
need to unzip this file???
to piggy back on that he may need to extract his stock recovery from the update file, am I mistaken? Since the return to stock update to marshmallow guide does not have his stock recovery in OP.
Arobase40 said:
- Make sure you have a stock recovery
- Unzip the downloaded file
- Remove your sdcard from your phone and plug it into your computer using a sdcard reader.
- Copy the dload folder with the UPDATE.APP file to your sdcard.
- Remove your sdcard properly from your computer and plug it back to your phone.
- make sure you have enough battery, so leave your phone connected to the main power supply.
- Hold Power On+ both Volume buttons at the same time : it could be tricky to pass this process, so you may have to repeat it many times.
- Once done, the update should start !
- Once you get a success message, wait long enough until the process complete.
- You could then search for newer updates.
- Finally, stop using Cyanogenmod if you're a noob.
Click to expand...
Click to collapse
thanks..but I'm already trying it..
huawei software installing..after install 8% showing software install failed
Nahid s said:
Thanks..but please tell me how to reflash it???
Click to expand...
Click to collapse
It should be explained in a PDF file inside the zip.
edit: didn't see it was already answered....
Arobase40 said:
Can you tell us for sure if you have a stock recovery or TWRP in your phone ???
Can you also be honest and tell if you flashed CM13 ?
Click to expand...
Click to collapse
I have stock recovery..and I'm don't flashed cm13
Arobase40 said:
- Make sure you have a stock recovery
- Unzip the downloaded file
- Remove your sdcard from your phone and plug it into your computer using a sdcard reader.
- Copy the dload folder with the UPDATE.APP file to your sdcard.
- Remove your sdcard properly from your computer and plug it back to your phone.
- make sure you have enough battery, so leave your phone connected to the main power supply.
- Hold Power On+ both Volume buttons at the same time : it could be tricky to pass this process, so you may have to repeat it many times.
- Once done, the update should start !
- Once you get a success message, wait long enough until the process complete.
- You could then search for newer updates.
- Finally, stop using Cyanogenmod if you're a noob.
Click to expand...
Click to collapse
Thank you arobase40 Worked for me and my 5x is back running stock firmware again
Arobase40 said:
You're welcome !
Don't forget to push the Thank button, it doesn't hurt.
Click to expand...
Click to collapse
Ok Sir
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Fran Montero said:
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Click to expand...
Click to collapse
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Ruben Craveiro said:
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Click to expand...
Click to collapse
Have you installed it already?
Many thanks!
Fran Montero said:
Have you installed it already?
Many thanks!
Click to expand...
Click to collapse
Im using latest twrp with updated preloader and LOS13
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Maybe you have a sd card formatted as internal storage?
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
1. load scatter.txt in earlier post.
2. select preloader, lk and boot imgs, location of these from the stock 20160810 ROM.
3. select recovery, location of TWRP img.
4. unselect everything else.
Click to expand...
Click to collapse
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
If your device already rooted, you can also install flashyfi and flash the .img file.
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
a bit late (did came to it to test your solution earlier) but it worked indeed. perfect, very much appreciated.
Can u upload 20171201 again?! Link is not working... Thx
opss said:
Can u upload 20171201 again?! Link is not working... Thx
Click to expand...
Click to collapse
You'll find a link here: https://forum.xda-developers.com/el...t/rom-stock-rom-android-6-0-12-01-17-t3542463
Thx dude
jotei66 said:
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
Click to expand...
Click to collapse
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
Click to expand...
Click to collapse
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
Click to expand...
Click to collapse
Have you tried pressing power and then keep finger pressed on vol up to go straight to TWRP recovery and then flashing a new ROM in TWRP ?
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
thecrazyfarang said:
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
Click to expand...
Click to collapse
No worries, just glad you got it sorted out.
Btw (although I know you dont really wanna risk trying it) my son uses my P9000 and has TWRP installed with no issues at all and root with Magisk.
But great yous sorted out
Root twrp Step by step for newbeee-
Ok,so I've installed TWRP 3.0.2-8 and when I start the phone it goes into the recovery... what to do next? Can I find a tutorial somewhere how to do this? And wich image can I use or is the best for the moment?
thx for helping...
i tried KingRoot,KnigoRoot,vRoot,Root Genius,framaroot, LG One Click Root ( Both Android and pc version ) but still cant root k130e. so how can i root this device?
is this device have TWRP or other Custom Recovery for flash it and then use SuperSu.zip for root?
no ppl have solution for this? i have an k4 m160 lg device, maybe the solution is the same.
Flash only Boot.Img of other KDZ
See This link:
https://forum.xda-developers.com/an...g-k4-k120e-prerooted-stock-rom-t3545353/page5
Last Page. maybee this Helps You out.
download attachment file
https://drive.google.com/file/d/1oynYRQHgl8YpKz4U7hXl4JbbJpeaiN0o/view?usp=sharing
run SP FLASHTOOL version SP_Flash_Tool_v5.1548_Win
select MT6735M_Android_scatter_twrp.txt
and let all file by default
select download only and flash in MTk mode (turn off the phone conect usb and start flash)
after boot phone into system
reboot in recovery mode with adb reboot recovery command
install supersu.zip or magisk with twrp
all done
it tested by me in many lg k4 (k130E) 100% WORK
Hit Thanks
mosirezaei said:
download attachment file
https://drive.google.com/file/d/1oynYRQHgl8YpKz4U7hXl4JbbJpeaiN0o/view?usp=sharing
Click to expand...
Click to collapse
The link requires signing in...
Mediafire Link
CXZa said:
The link requires signing in...
Click to expand...
Click to collapse
Try This one in mediafire
http://www.mediafire.com/file/4ripfjhqs8fkt55/K130E_twrp%2Broot.rar/file
donf forget post result and hit thanks if it worked
enjoy