Related
To allow Q&A to be separated from bugs/development - this is the Q&A thread for the I9100 Hellraiser found at http://forum.xda-developers.com/showthread.php?t=1335377
I intend to put FAQs here, along with keeping a list of tested ROMs. Keep general discussion here, and only use the other thread for bug reports and development.
In general: If it's listed as a known issue, and you don't have a fix, keep it out of the development thread. If you're not sure if it's Hellraiser-specific and common to multiple ROMs, keep it out of the development thread. In short, if you ask "Is this a bug?" in that thread, I will report it to the moderators. If you report a bug that is ROM-specific and not a Hellraiser issue, I will report those to the moderators starting tomorrow.
Tested ROMs:
I9100 XXKI3 Based:
SensatioN 1.8 by Crysis21 - Tested by myself with Alpha 0.2.1 - Fully working except 0.2.1 Known Issues, defaults to "good" AT&T APNs except for it has the "Broadband" APN which may cause the Tether Police to nail you if you tether. I suggest deleting that one.
VillainROM 3.0 + JKay Deluxe Themes v12 - Tested by myself with all versions, and my current "testbed"
I9100 XXKI4 Based:
CheckROM Revolution HD 2.0.0 - A few user reports indicate this may have WiFi issues when Hellraised similar to UCKJ2/J4 for I777
I9100 XWKJ2 Based:
CriskeloROM V30 + JKay Deluxe V12.1 - Reported by simpl3lang, seems to be working
If you have a report for a ROM, please indicate which I9100 firmware it is based on (XXKI3, XXKI4, etc.)
Also, I have seen reports that XWKK5 bases (like the latest CheckROM as of 1/8/2012) have the same issues with Bluetooth HID not working as UCKK6 - even when not Hellraised.
If someone posts a good, in-depth review of a ROM, I may link to it from this list. (Time permitting...)
Frequently Asked Questions:
Q: The home button lag is back, why?
A: The ROM has the annoying Vlingo double-tap support. Either smali it out (look for tips in the UnNamed ROM git repos, or look for a fix for that ROM.) - A commonly available fix may be flashing a JKay Deluxe Theme appropriate for the base of your ROM
Q: Home button haptic feedback is not working, why?
This is something that can't be "universally fixed" with Hellraiser. It must be modified in an individual manner for every ROM in android.policy.jar with some smali magic. It was the same deal with I9000 ROM ports to the Captivate.
Q: Where do I find themes/mods?
Look through the I9100 Themes/Apps forum for mods/themes appropriate to your ROM. Nothing I do in the Hellraising process should break any of these compatibility-wise.
i finally jumped on board and installed an i9100 rom. so far so good. im loving it. first install went smooth. root working and all. i dont know about battery life (my phone still plugged in while testing this out).
okay here is the rom ive installed "CriskeloRom V30-S-BAR-12/7-Tog-BLN-CallREC-Overscroll-7Locks-PWR-M-Esxt-(XWKJ2-2.3.5)"
http://forum.xda-developers.com/showthread.php?t=1168836
i have also installed JKAY DELUXE SETTINGS v12.1 <--great addon. lets you have multiple slide to unlock (AOSP lockscreen). option to remove home double tap. option to customize power options (extended). crt off/on animation. overscroll glow. all these options and more on this DELUXE SETTINGS app. http://forum.xda-developers.com/showthread.php?t=1154278
so far im loving it. this will be my rom for now. thanks ENTROPY for the great HELLRAISER.. you the man
edit: alright i have tried wifi tether. its not working. i know its mentioned in the known issues. the workaround doesnt seem to work for me at least ......i enabled changed ssid and password. but once i exit settings, it reverts back to borkness lol. any other workaround? thanks
Edit 2: nevermind i figured it out. I rmmbered i replaced the Settings.apk with one that has a theme i like. That borked wifi tether for me. I returned the settings apk i replaced, rebooted, and all is good
I just wanted to bump this to the top... this thread needs to be stickied! How do I ask a mod to sticky it?
Sent from my GT-I9100 using xda premium
Good question - I know in the Infuse section some ROM Q&As were stickied, but they don't do that in other forums.
Plus at least this is CLEARLY linked to from the main Hellraiser thread.
Hellraiser doesn't seem to work with the new 1.9 sensation update, unless I'm doing something wrong. A popup saying the process com.android.phone has stopped unexpectedly comes up repeatedly as the app restarts. Seems like a modem error, the sim card isn't read properly either. I'm about to try hacking the updater script to remove the kernal and modem changes, is there anything I would need to do other than delete those lines and repack it?
I did reinstall hellraiser after the update.
selfassembled said:
Hellraiser doesn't seem to work with the new 1.9 sensation update, unless I'm doing something wrong. A popup saying the process com.android.phone has stopped unexpectedly comes up repeatedly as the app restarts. Seems like a modem error, the sim card isn't read properly either. I'm about to try hacking the updater script to remove the kernal and modem changes, is there anything I would need to do other than delete those lines and repack it?
I did reinstall hellraiser after the update.
Click to expand...
Click to collapse
You must be doing something wrong... I am running 1.9 and have been since the test build.. I will post some screen shots in a moment
Sent from my GT-I9100 using xda premium
Here are some screen shots... check out my battery life ..
I did have it hooked to a computer while 1.9 downloaded and that's why you see that slight bump...
Sent from my GT-I9100 using xda premium
How did you install specifically?
I can't get it running. I've tried updating 1.8 and doing a fresh install and flashing hell raiser afterwards but the com.android.phone app crashes and signal is lost upon reboot. It actually works until I reboot.
selfassembled said:
How did you install specifically?
I can't get it running. I've tried updating 1.8 and doing a fresh install and flashing hell raiser afterwards but the com.android.phone app crashes and signal is lost upon reboot. It actually works until I reboot.
Click to expand...
Click to collapse
I had 1.8 flashed 1.9 on top without wipe.
Mounted system and data and then flashed hellraiser on top. And haven't had any issues.
Sent from my GT-I9100 using xda premium
An i9100 modem/kernel will NOT work, that's for sure.
In fact some of the behaviors you mention sound kind of like a classic example of accidentally running an I9100 modem. The rest sound like a classic example of not wiping or doing an improper TiBu restore.
I'll try to test tonight.
It may have been titanium backup, I also didn't remount before hell raising. I'll get it working if he did
Hi Entropy, do you have any idea why the tethering settings are not persistant?
I remounted before flashing and still had the problem. When restoring backup I used advanced restore and found that the culprit is in system, not boot. I don't have the time for a full wipe today.
If it works for entropy I'll just do another full wipe and not restore anything. Thanks for your time on this.
amtrakcn said:
Hi Entropy, do you have any idea why the tethering settings are not persistant?
Click to expand...
Click to collapse
Not yet, haven't had time to mess with it yet.
selfassembled said:
I remounted before flashing and still had the problem. When restoring backup I used advanced restore and found that the culprit is in system, not boot. I don't have the time for a full wipe today.
If it works for entropy I'll just do another full wipe and not restore anything. Thanks for your time on this.
Click to expand...
Click to collapse
Titanium backup always give me problems so I just don't use it anymore...
Have you tried a fresh install without titanium backup?
Sent from my SGH-I777 using xda premium
CheckROM RevolutionHD v3.1.1
I tried raisin' hell with CheckROM RevolutionHD 3.1.1 last night. This is an XWJK3 based ROM, and seemed to work fine. I was intrigued with the idea of having a kitchen in the ROM to customize it and wanted to check it out. Everything seemed to run and work ok. Home button lag and lack of haptic feedback were known and expected. There were a couple of things though -
1) The phone ran really hot. Like skin singeing hot. There was another post on the CheckROM thread that talked about the phone running hot. But I noticed the same problem with a hellraised VillainROM as well. So not sure if that is a hellraiser issue or a ROM specific issue. I do know about the media scanner crashing due to incompatible codecs between Samsung derived ROMs and CM7/MIUI, I didn't get a chance to see if getting rid of my media would fix it because of issue 2...
2) The kitchen app while great in theory, isn't quite there in practice yet it seems like. I tried installing a few mods from the kitchen, but a lot of times downloads failed. I tried installing the BlueMonkey theme from the kitchen and it caused the phone to bootloop. There are quite a few people talking about bootloops on the ROM page, so I am leaning towards this being a ROM or kernel incompatibility issue. I have never had bootloops or anything nearly as funky with any of the native I777 ROMs. I had to flash back to bone stock to recover. Thank god for Nandroids
So, I guess it is ok to the add XWJK3 based ROMs to the compatible list if Entropy thinks both of the above two issues are not hellraiser related.
I've never had heat problems on VillainROM hellraised.
I've been starting to hear that CheckROM 3.1.1 has a lot of issues with the kitchen app - as in 3.1.1 has issues in general. I've seen lots of comments about people sticking with 2.0.0 until it matures.
I only tried CheckROM VERY briefly - enough to confirm that wifi worked (as there was a negative report on wifi with CR 2.0.0)
I'll update the list later this week.
GingerMod
Thank you for this awesome tool, Entropy! You can add GingerMod (http://forum.xda-developers.com/showthread.php?t=1220283) to your list of XXKI3 ROMs that work well Hellraised.
I've quickly tested out everything I can think of from a fresh install (wipe everything, format/system) and no problems to report. Wifi tethering has the minor problem of reverting to default settings, but they work, so it's not an issue in the slightest for me. Default APN settings are the same as on UnNamed--ATT Phone and ATT WAP. Home button haptic works out of the box--I didn't do anything.
For those interested, some quick hits about this great ROM:
- Most Samsungyness removed, really convincing AOSP feel. It's not just a theme, it's rebuilt. Just a few niceties such as Camera, Browser, FM Radio remain. You can add back whatever Samsung features you want.
- Small, 1/2 size compared to stock ROMs
- There is no lengthy screen on delay during calls when removing phone from your face (present in UnNamed)
- Customizable via included "Extras" settings and JKay app
- Been stable for awhile. Over at the thread, you won't notice a lot of random issues or people clamoring for "fixes". It's just really complete.
*Update* - I installed a WiFi manager app then setup up the password for the connection and the toggle works even if WiFi manager isn't running anymore. I couldn't find any way to setup WiFi without the app though.
WiFi worked before I flashed Euphoria.
I must be over looking something and cant find anyone with a similar issue. Thanks to all the info on this forums I have rooted my phone and flashed my first rom (ICS Euphoria RC2.1). I have done the following on my Samsung Vibrant.
-Used Odin to go back to stock RFD
-Rooted
-Installed CWM
-Wiped data/factory restore and cleared cache
-Flashed ICS Euphoria RC2.1 (from what I've read WiFi should work on this rom)
Wifi Toggle does absolutely nothing, no icon shows in the notification bar and I am not asked to choose a router. I can't find WiFi settings either (besides to make the toggle appear or disappear).
A few days later I cleared cache and installed the optional ICS Kiss Kernel from the link in the same post as the rom (no change).
Did I miss something? I couldn't find an MD5 code to make sure my download was good. Should I Odin back to stock and try again?
Dunno if it will make difference...
Try to download it again (if possible using firefox for stability)...
Do all the process again... but dont forget to mount and format /system folder...
Hi XDA,
For the past several days I've tried to Safestrap a custom ROM to my phone. I'm running a rooted Samsung Galaxy S4 with ME7 (Verizon), Android 4.2.2. It's worth noting that the phone has not received an official Verizon update since August; I tried using Loki back then before knowing about the locked bootloader, and it has not affected anything except that the phone softbricks into the ODIN screen whenever it tries to install a Verizon update. (I hope this is not the cause of the problem, but let me know if you think it is.) It's also worth noting that I deleted the stock messaging app (SecMMS.apk and SecMMS.odex.) I am using Safestrap 3.65.
So far, I've tried three different ROMs (Hyperdrive RLS10.2, Jelly Beans Build 7, Google Play Edition for 4.2.2.) Each install produced the same results: it installs just fine in the ROM slot (along with the ME7 modules afterwards), but when I reboot the system, it shows the Samsung logo, the Safestrap splash screen, and then the screen goes black indefinitely. A battery removal is required.
I've tried every trick I could find to get the ROMs working. I've done a full factory reset each time (data + both caches), tried downloading each mod several times on both my phone and my computer (verified MD5 each time) and same with the modules, waited at least 20 minutes during each boot attempt, tried installing each ROM with default settings and minimal apps, used Stock kernels each time, made sure the modules are installed before rebooting (I also tried without the modules to make sure they weren't the problem--same result.) Each time I try an install, I delete the ROM slot and format it again (usually a 1GB-2GB-300MB split.) I've searched and searched and can't seem to find anyone with this problem that hasn't solved it through one of the fixes I've unsuccessfully tried.
I'm plum out of ideas now, and am hoping someone may have more wisdom to share. Please help!
Here's a Stockish ROM for your N915P. This ROM has Knox, Sprint ItsOn, and secure storage removed. Nothing else was done to this ROM. I'm new to the Note Edge so I may upload patches to remove any other traces of Knox or ItsOn or optimizations I happen to find while making my own ROM.
Prereq: OG1 Baseband. Download it below.
Modified stock kernel (BeastMode Stock): Kernel modified to allow root by disabling "Root Restriction in defconfig"
Download
MD5: 75bd507e3b4296a128f1c0c48fd2359c
Version 1.1: Enabled many TCP Congestion options via defconfig. Added init.d ability via ramdisk.
Odex:
Download
MD5: 59d544ef6a4bc12d969f4efd9577d36d
DeOdex DEBLOATED:
Download
MD5: 00b5246b9c2074e7ff04f6af2bad1ec2
OG1 Baseband:
Download
MD5: 3bc88209d60117fb573e0f5a2e50f4e9
Patches and fixes:
None yet.
[size=+3]DeOdex note:[/size]
The first boot time for this DeOdex ROM is very long. Approximately 5-8 minutes. Your phone will get hot as the splash screen remains on the yellow Sprint boot animation. I recommend keeping your phone in a cool environment while this is happening. The heat, if not properly checked, can make boot times even longer as the system throttles speed in order to deal with the heat. This doesn't happen on the Odex version.
[size=+3]Install instructions:[/size]
-Are you currently on the OC8 bootloader and would like to stay on it?
--Simply flash the baseband with Odin, and the ROM.
-Are you on the update from OTA or flashed the OG1 TAR?
--Flash kernel only.
-Are you one of the unlucky ones to take the OTA and hose your system trying to root and are now on another ROM?
--Flash ROM only.
-Are you on any build after OC8 but not the current OG1?
--Flash the baseband and ROM. Bootloader is optional and not available in this thread as of yet.
Wiping is only necessary if you are coming from a different base, such as AOSP/CM. If you are coming from a touchwiz ROM, wiping isn't needed, but won't hurt.
Changelog:
9/5/15: Initial Release.
Kernel source code: Download
Thanks, will flash tomorrow.
Thank you so much freeza!! Patiently waiting for the deodexed version and for the baseband.
Added modified stock kernel v1.1 and baseband.
Freeza if I'm on 5.0.1 still just flashing the baseband may give me better service ? Technically...
Downloading now still waiting on the deodex will play with the stock to see how it is thanks
Ok, flashed rom, kernel, and modem. Took a while to boot but all is running well at the moment. Thanks for supporting our device!!
DeOdex uploading....
What What!!! By far the best developer on a Samsung!! Thank you so much for your hard work brother!! Real Talk, i still have your rom on my Note 3! It runs flawlessly!! XD
Get your DeOdex on, guys! ;D
Thanks so much for this!!! I love the separate edge screen and have no reason to "upgrade" to the Note 5
Thank you freeza NICE WORK WITH THE KERNEL
When I saw you had been requested to come help this phone achieve root I knew great things were going to come to those who waited. I've had other devices where you were there to help gain root and again you came through. I purposely didn't take the OG1 update because I knew in time this device wasn't going to be ignored. IMO it is the best NOTE device out there and it will be mine until they make a NOTE EDGE 2 (With SD card and removable battery). Thank you for the quick response and the hard work you do to make this happen.
Cant get either one of them to boot. Both the odex and the deodex wont boot, they both flash fine and then after the phone reboots it stays on the yellow sprint screen Maybe for up to a minute then reboots and it cycles that way. Never boots. I've tried not wiping/Factory restarting as well as wiping/Factory resetting. Have also tried formatting through TWRP to no avail. Have also tried flashing the kernel and wiping caches after flashing but Nothing is working. Have also flashed the baseband.
Im currently on OF6 if that should matter.
Edit: md5 Sums have also match up. Have downloaded both from my phone and a pc to no avail.
Edit 2: tried both TWRP 2.8.6.0 and 2.8.7.0. Also tried clockworkmod recovery and that didn't work either.
I had success but it took some time. I downloaded the deodexed debloated rom, the kernel, and the baseband. I had a method to how I wanted to do this and here is how i got there.
I was running OC8 rom rooted.
1. I odened the baseband tar file and rebooted. But unfortunately it bootlooped on the initial splash screen (note edge) so
2. I ran TWRP recovery and installed the kernel file. Rebooted phone and it ran fine. I looked at the settings about phone and saw that the baseband and the rom all said OG1 but i had not installed the rom yet. So i figure it was a trick to get the baseband to install. So
3. I went back into recovery. Wiped dalvik cache and regular cache and installed the new rom. It installed fine and i waited the length of time for the initial boot up. But this time as it was "Android is starting" it rebooted and got stuck on the sprint splash screen and kept randomally vibrating. Having the ability to remove the battery
4. Rebooted back into recovery, wiped everything including internal storage, and reinstalled the deodexed rom. It installed fine and went to the initial startup screen where it tries to initialize and it rebooted one time, back to the initialize screen but continued without a hitch.
I currently am running OG1 5.1.1. With root.
At times during setting up the phone it would randomally vibrate for no reason...short bursts...but it hasn't yet again rebooted, restarted, or crashed. It is faster from what i see. Probably because there are almost no google apps installed. I've had to install chrome, youtube, and maps. But all seems fine. My signal and speeds are the same so the baseband didn't do much to change that. But so far so good.
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
I did try to install over my odexed OC8 with this new rom but because there is so much different about the files that are installed IMO formatting the phone was the only way to get this to work.
---------- Post added at 12:16 PM ---------- Previous post was at 11:30 AM ----------
One final thing just in case it isn't known: when you wipe everything in TWRP, excluding external storage, you have to restart the recovery before trying to install a rom. It will say you have no OS installed, but you are restarting the recovery not booting a rom, so that's fine, but you do lose root status when wiping. So the next screen gives you the ability to gain root again, but you have to restart TWRP to do that. In the past i tried to figure out why installing after wiping didn't work, and 99% of the time it was because of that. I also don't like installing new roms over older roms (even if they are the same base (touchwiz to touchwiz)) because i feel I would spend more time troubleshooting why something isn't working instead of just starting over. I find less hassle doing it this way.
I odin baseband .tar file, than reboot it to recovery, and flash kernal and odex room at the same time, saw some red messages when kernel was flashing, than odex rom was next but it was successful when it was done. (I did not know if kernel falsh ok so i reflash kernel again) reboot to system and after the android system updated all its ok. No problems so far.
Oh and i inclided the supersu at the same time i flash kernel, odex rom and supersu.
1. Odin baseband tar file.
2. Flash kernel, odex rom and supersu.
3. Re-flash kernel.
4. Reboot to system and profit.
(Maybe i did un necessary steps, but its working. )
Was running great but have been experiencing Google account and store issues. Tried odex and deodex versions with similar results. Anyone else having issues?
Johnny Halo III said:
Was running great but have been experiencing Google account and store issues. Tried odex and deodex versions with similar results. Anyone else having issues?
Click to expand...
Click to collapse
Just starting to have random freezing. And not able to select my apps froms the edge screen, i can only scroll through it. Will remove all the app shorcuts and re-add tham again.
**update 1.
I removed all shorcuts from the edge screen and added them back, all work but some i have to select them a few times before they open.
Maybe i have to reflash, reset, clean and wipe.
**update 2.
Clean install of odex rom, and kernal 1.1.
No more lagg but the edge screen does not work properly. Not able to select and open some of the favorite app shorcuts.
**update 3.
Factory reset, cleaned and wype, odin sprint lollipop update (uf something), downloaded OG1 update. Installed all apps from scratch. And the edge screen does not work. I can scroll, side to side, up and down, but when i select an app it does not open it.
** update (last one)
Foud the code to test the phone hardware.
*#0*# on dial screen. Tested all and it came out good. But i notice that some how the edge screen its not as whide as it used to be ( like its more to the right of the phone) so where i use to touch to select an app its now more to the right emd of the edge, thats why i was able to scroll but not select the app.
Its all good now. Now second round of flashing.
Will give it another try at the room.
Thanks Freeza and sorry about the problems i had and hopefully did not cause anyone from not trying this great work pr yours.
I left all the problems i had so tje next person trying this room does not get discureged from trying. But allways fallow direction.
:thumbup:
** last update
After setting and resetting, flashing and un-flashing, rooting and un-rooting. I can finally wrote that all is good. Running latest lollipop 5.1.1 and freeza's new 1.1 kernel, I can reprt that all is smooth as butter.
Thanks for the hard work.
Thank you so much for your hard work Freeza! So glad I'm finally running 5.1.1 on this beast :]
The ROM is working pretty well, but I have noticed that every now and then, the phone will be rather laggy. Turning the screen off and on again seems to fix the issue, making me think that the processor is being throttled while the screen is off (good) but isn't being sped back up when the screen is turned on..sometimes.
It's not a huge deal, but I was wondering if anyone was experiencing the same thing.
No issues here.
Starting on OG1 had to flash bootloader, kernel, deodex rom and supersu to make it stick. Two days now and battery, signal and speed seem improved.
Thanks freeza!
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Atronid said:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Click to expand...
Click to collapse
Thanks for your reply!
Yes, I do have used ROMs compatible with my device as they've all are made for espresso3g (which is my device).
I know it's not really the best way but I'll keep on trying with custom recovery for some more time and then perhaps try buying a new cable, and see if that works.
Tried installing Google Play Store from APK both on a clean ROM without GApps and with, but it still doesn't run and keeps on saying that either Google Play Store or "com.google.process.gapps" has stopped.
Alright...
I'm out of idea x/
lordquestionmark said:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
r&xp said:
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
Click to expand...
Click to collapse
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first seems to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
lordquestionmark said:
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
Click to expand...
Click to collapse
Ok...
This is what I would do if it was my device and I was facing what you are describing. It might take some time and a little patience to do everything described here, but it might also work.
1. Usin Odin, flash latest available official rom for the device. Let it boot and complete setup.
2. Use odin and use CF autoroot to root. Again boot and complete setup.
3. Flash Twrp. Enter Twrp and flash latest flashable supersu.zip. At this time I believe is version 2.82. Again boot and let it reach your welcome screen.
4. Enter Twrp. Enter advanced wipe. Wipe everything except external SD and usb at least 3 times. Do not exit twrp.
5. Install you rom. Do not exit Twrp.
6. After installing your rom, Twrp will ask you if you want to wipe cache/dalvik. "Yes" but DO NOT reboot.
7. Install correct version of gapps for your custom rom (correct both android version and architecture version). Again twrp will ask you to wipe cache/dalvik. "Yes" and this time reboot.
See what happens. If it gets stuck, try entering twrp again and do a factory reset only, only once and reboot again.
If that fails again... I will at a loss here myself too...
I did a quick search here on xda on P5100, I am providing some links that you can take a look at. You probably already searched yourself but you never know...
https://forum.xda-developers.com/ga...-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-blissmallow-t3312320
https://forum.xda-developers.com/showthread.php?t=1686514
https://forum.xda-developers.com/showthread.php?t=2581782
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-candy-5-v2-5-5-t3136904
If nothing else helps, perhaps the best way to go around this would be to find a custom rom with at least some google apps pre-installed, in order to save you the trouble you are currently facing.
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
did you find a solution
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hey, just try uninstalling Google play services and install them again. I faced the same issue and now it's all working on my Samsung Galaxy Core 2