Android 5.0.2 G850A - Samsung Galaxy Alpha

hi to every body
the Dark story of G850A firmware is come to end. i come with a legendary message.
this is 5.0.2 Rom
this is unlock factory ROM and dont lock device sim
this is link : https://mega.nz/#!iJoAVADD!FMcjbMV8FSMKQahd5f23SeHvTuzYpM3ymvvzFFbbaPU
don't copy my link and my work. please respect.
REGARDS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Downloading...
Thanks Amir!

Thank you for the time and effort you put into getting this for us!

Thanks Amir
Sent from my SAMSUNG-SM-G850A using Tapatalk

afficial rom
thanks amir_n71 for upload this rom it is perfect I download it install on my phone with Odin there are 4 files that any file after extract must be in same position and then click start and after 5 min and some restart you see the beautiful 5.0.2 android on it wow !!!!!! yes this is true or real or genuine and nice before this post i was :crying: for big problem because i can not update with other sim card with other country sorry at&t force user for used sim card and special position:laugh:

gracias amigo Amir por este gran aporte después de un largo dia pude descargarlo solo falta ubicar la nueva actualización que sacaron el 12 de agosto
Update summary
On August 12, 2015, AT&T released a software update for the Samsung Galaxy Alpha (G850A). The update will be available via Firmware Over The Air (FOTA). The file size is 387MB and requires a Wi-Fi connection.
Software Update Include
Device security improvements
User-Initiated Software Update
Ensure device is sufficiently charged
Select Settings from application tray or pull down menu.
Select More box in top right corner.
Select About Device.
Select Software Update and follow subsequent prompts.
Verifying the Update
Select Settings from application tray or pull down menu.
Select More box in top right corner.
Select About Device.
The following information displays:
Software Version: 5.0.2
Baseband Version: G850AUCU1BOC7
Kernel Version: 3.4.0-4486591 [email protected] #1
Build#: LRX22G.G850AUCU1BOC7
File Size: 378MB

thanks amir_n71 for uploading this

Can we get that update too 378MB

Used this to flash to 5.0.2 yesterday and it worked great. Thanks!

What to do
Can anyone please tell me what to do with the 4 files??????

HELPPPPPP
i successfully flashed this on my phone but the recent app soft button on my phone has stopped working

Wipe data after install
Warning : wipe all data will erase all data

hi can you tell me how to use odin to flash my phone not sure how to do it a step by step guide on what to do would be appreciated

I dont know its about me or lp bug..my camera cant focus quick as kitkat version...special in close range stuffs..must use flash to focus first..then capture..even in good light..someone can test it?
Sent from my SAMSUNG-SM-G850A using Tapatalk

recent app button not working
I formatted my phone but to no avail, the recent app soft button is still not working!!!!!!!!!

como es la instalacion
AnderGuzmanD said:
gracias amigo Amir por este gran aporte después de un largo dia pude descargarlo solo falta ubicar la nueva actualización que sacaron el 12 de agosto
Update summary
On August 12, 2015, AT&T released a software update for the Samsung Galaxy Alpha (G850A). The update will be available via Firmware Over The Air (FOTA). The file size is 387MB and requires a Wi-Fi connection.
Software Update Include
Device security improvements
User-Initiated Software Update
Ensure device is sufficiently charged
Select Settings from application tray or pull down menu.
Select More box in top right corner.
Select About Device.
Select Software Update and follow subsequent prompts.
Verifying the Update
Select Settings from application tray or pull down menu.
Select More box in top right corner.
Select About Device.
The following information displays:
Software Version: 5.0.2
Baseband Version: G850AUCU1BOC7
Kernel Version: 3.4.0-4486591 [email protected] #1
Build#: LRX22G.G850AUCU1BOC7
File Size: 378MB
Click to expand...
Click to collapse
Hola amigo me gustaría saber como hiciste la instalación, ya que estoy descargando....

flash again
shoaibjaved said:
I formatted my phone but to no avail, the recent app soft button is still not working!!!!!!!!!
Click to expand...
Click to collapse
hi went through the upgrade with no problem what i recommend to you to do is to flash again or downgrade to kitkat ang upgarde again

shoaibjaved said:
I formatted my phone but to no avail, the recent app soft button is still not working!!!!!!!!!
Click to expand...
Click to collapse
hahaha ! You should reset factory. It's delay but you try click reset. Wait 5 minutes . Your phone not yet wipe may be lag !!!
I succeeded !!!

shoaibjaved said:
I formatted my phone but to no avail, the recent app soft button is still not working!!!!!!!!!
Click to expand...
Click to collapse
It is a known bug of 5.0.2 update that affects certain 850As, not all. There is no real solution to it other than get a new phone or go back to 4.4.4.
There is a work around IIRC. You can turn up/down the touch sensitivity in settings and it may help.

Dorelys said:
Hola amigo me gustaría saber como hiciste la instalación, ya que estoy descargando....
Click to expand...
Click to collapse
Buenos días en lo personal hice un respaldo de toda la información que tenia en el teléfono, luego hice un factory reset desde la recovery del teléfono para entrar allí tienes que apagar primero el teléfono, segundo pulgar el botón de subir volumen mas home seguido de power los mantienes pulsados al mismo tiempo, luego entres a la recovery te va aparecer una serie de títulos pero la que vas a borrar primero es data y luego cache si tienes duda de como entrar fíjate de este vídeo.
https://www.youtube.com/watch?v=l-NZSgczPlo
Luego que hayas echo todo esto al reiniciar el teléfono procura que no inicie en su totalidad al darle reboot y que el teléfono se apague tienes que darle rápido al botón volumen abajo mas home y power al mismo tiempo para entrar en modo descarga fíjate como en este vídeo.
https://www.youtube.com/watch?v=r03Kkkbzkjo
finalizando todo esto lo mas importante flashear la rom por odin es sencillo la instalación tienes que flashear los 4 archivos BL - AP - CP - CSC al mismo tiempo es decir los vas incluir todo en el odin recuerda que tienes que tener instalado los driver del teléfono para que odin te reconozca el teléfono este vídeo te muestra como hacerlo
https://www.youtube.com/watch?v=ar_RR_86QJQ
Saludos
---------- Post added at 02:13 PM ---------- Previous post was at 02:12 PM ----------
Dorelys said:
Hola amigo me gustaría saber como hiciste la instalación, ya que estoy descargando....
Click to expand...
Click to collapse
http://es.tinypic.com/r/xfc0e9/8

Related

[FIRMWARE] e10a 2.1 baseband xx15 (Link is UP @ MF)

I have created the e10a 2.1 baseband xx15 firmware and i like to share with you!
i wanna thanks @tufadorin for the help!
This is a. ftf to flash with flashtool
put it in the firmware folder and flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS FOR LATIN AMERICAN USERS WHO LOST THEIR 3G CONNECTION TRYING TO MEET REQUIREMENTS TO INSTALL A ROM.
sorry for my bad english.
Saludos a todos los users de Taringa, Android comunidad oficial y Mini Xperianos Pro. atte ChavitoRottweila
Download:
http://www.mediafire.com/?36ohwdqhqnueah1
IF THIS WAS HELPFUL PRESS THANKS!
thnks
oye muchas GRACIAS la voy a provar xD
hlp
no me funciono el 3g vivo en honduras ayudame por favor
death_kiru said:
no me funciono el 3g vivo en honduras ayudame por favor
Click to expand...
Click to collapse
flashaste ese firmware? despues de flasharlo tenes que configurar el APN
??
AMIGO ya la prove y no me funciono el 3g. configuro el apn y todo siemrpre con la (E) alguna sugerecia! mira cuando lo compre ya venia con 2.1 ahorito lo ando con 2.3.5 http://forum.xda-developers.com/showthread.php?t=1068553 esta es la room que ando con el kernel personalizado pero me gustaria que se me activara el 3g sii saves de otra forma me dices gracias xDDD
tal vez solo no te llega la señal en donde estas, pregunta a la operadora,
cuando lo comprastes andaba el 3g?
death_kiru said:
AMIGO ya la prove y no me funciono el 3g. configuro el apn y todo siemrpre con la (E) alguna sugerecia! mira cuando lo compre ya venia con 2.1 ahorito lo ando con 2.3.5 http://forum.xda-developers.com/showthread.php?t=1068553 esta es la room que ando con el kernel personalizado pero me gustaria que se me activara el 3g sii saves de otra forma me dices gracias xDDD
Click to expand...
Click to collapse
Si estas en 2.1 Anda a configuraciones inalambricas y ponelo en modo WCDMA sólo, si te levanta señal asi ya podes tener 3g.
Si pusiste este firmware y arriba una ROM (MiniCM7 me imagino) Pone el widget de sólo red 3g.
no me entiendes
ChavitoArg said:
Si estas en 2.1 Anda a configuraciones inalambricas y ponelo en modo WCDMA sólo, si te levanta señal asi ya podes tener 3g.
Si pusiste este firmware y arriba una ROM (MiniCM7 me imagino) Pone el widget de sólo red 3g.
Click to expand...
Click to collapse
mira cuando compre el x10 mini venia con 2.1 de android bueno lo rootie le livere el kernel nAa-kernel04....... bueno vi tu post de del que tu room activa el 3G bueno la puse y no me dio nada configure el internet siempre me funcionaba en G......
aca donde vivo hay 3G en claro y tigo yninguna de las dos bandas me funciono! de todas formas gracias
si encuentras otro metodo de activar el 3g si flash seria mejor gracias
death_kiru said:
mira cuando compre el x10 mini venia con 2.1 de android bueno lo rootie le livere el kernel nAa-kernel04....... bueno vi tu post de del que tu room activa el 3G bueno la puse y no me dio nada configure el internet siempre me funcionaba en G......
aca donde vivo hay 3G en claro y tigo yninguna de las dos bandas me funciono! de todas formas gracias
si encuentras otro metodo de activar el 3g si flash seria mejor gracias
Click to expand...
Click to collapse
pero te levanta señal forzandolo a usar solo la red 3g?
Please write in the native language of this forum
sognare69 said:
Please write in the native language of this forum
Click to expand...
Click to collapse
sorry about that it wont happen again!
hey budy the link doesn´t work please revisalo para probar
no
ChavitoArg said:
pero te levanta señal forzandolo a usar solo la red 3g?
Click to expand...
Click to collapse
nooo no me levanta señal ni nada porq por logica si tienes señal3G deberia de conectarse ah dicha señal y si hay 3g aca pero no me da nada! tu que piensa que puedo hacer
The link is dead!
ppca. said:
The link is dead!
Click to expand...
Click to collapse
The link is working again, i dont know what happened!
Works just PERFECT
Thank you man
cfucci said:
Works just PERFECT
Thank you man
Click to expand...
Click to collapse
Thanks to you men!
Man, i'm experiencing some reboots when i turn on my phone, did u know why is that? since i flashed ur firm, it works, but when i turned my phone off and then on again, i've experienced a slowless or something, then the phone reboots, can u help me at all?
cfucci said:
Man, i'm experiencing some reboots when i turn on my phone, did u know why is that? since i flashed ur firm, it works, but when i turned my phone off and then on again, i've experienced a slowless or something, then the phone reboots, can u help me at all?
Click to expand...
Click to collapse
flasha again, the firmware is totally stable
Oh man, thank you so much! Because of your firmware I got install MiniCM7-2.1.3 ROM in my Xperia X10 Mini.
My phone was E10a version with 2.0 firmware and 005 baseband, running Android 2.1. Now it is using 2.1 firmware, 015 baseband and 2.3.7 Android.
Thanks!

Unable to Send / receive sms, on custom rom, Please help me!

Hi all, I have a problem and I would like they could help me, what happens is that you install the ROM "ArtModv2.0" and is very spectacular, i can do EVERYTHING (calls, internet, gps) but I have a big problem and I can not send any sms, not the stock app work, hangouts sms does not work, go sms pro does not work, Handcent SMS does not work, no longer do I love this ROM but obviously it is not something more to or receive sms, sms are the ones who receive the operator, I do not live in USA so do not use any carrier over there, it's very frustrating to know that I can not find any way to make it work, well no more hope enlighten me :good: Greetings! (sorry for the english)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gabriel18 said:
Hi all, I have a problem and I would like they could help me, what happens is that you install the ROM "ArtModv2.0" and is very spectacular, i can do EVERYTHING (calls, internet, gps) but I have a big problem and I can not send any sms, not the stock app work, hangouts sms does not work, go sms pro does not work, Handcent SMS does not work, no longer do I love this ROM but obviously it is not something more to or receive sms, sms are the ones who receive the operator, I do not live in USA so do not use any carrier over there, it's very frustrating to know that I can not find any way to make it work, well no more hope enlighten me :good: Greetings! (sorry for the english)
Click to expand...
Click to collapse
did you wipe data/chache and factory reset before installing the rom?
yes and not work
hello, if I did all the wipes, and install the ROM and the patch did not work, then went back to do the install the ROM wipes did all wipes and install the patch and not worked, and finally went back to do all the install wipes I wipe the ROM install patch again and went back to do wipe and still works :/'s a shame because everything else is very well (google traductor)
Gabriel18 said:
hello, if I did all the wipes, and install the ROM and the patch did not work, then went back to do the install the ROM wipes did all wipes and install the patch and not worked, and finally went back to do all the install wipes I wipe the ROM install patch again and went back to do wipe and still works :/'s a shame because everything else is very well (google traductor)
Click to expand...
Click to collapse
I asume you speak spanish so i'll speak in spanish too.
En que pais estas? yo estoy en honduras y no tengo ese problema. Te pasa con algun otro rom?
(what country are you in? im in honduras and don't have this issue. Does it happen with another rom?
hola, solo me pasa con esta rom que de verdad me gusto muchisimo, con todas las cosas que trae, en estos momentos instale la CM11 pero no se no me gusta la sencilles de todo, y le he preguntado a dos personas que la tienen y no tienen este problema de todas formas la estoy descargando otra vez, espero que funcione porque es una lastima que no la pueda usar yo soy de venezuela, a la persona que le pregunte es de colombia con el E970 y le funciona todo, y otra persona que es de venezuela tiene un E975 y le funciona bien ya que esta rom es portada de ese modelo. Saludos!
hello, only happens with this rom I really a lot like, with all that brings, right now install the CM11 but no I do not like sencilles all, and I have asked two people who have it and not have this problem anyway'm downloading again, hope it works because it is a shame that can not use it I am from Venezuela, the person is asked Colombia to the E970 and it works all and another person is in Venezuela has an E975 and it works well since this rom is the cover model. Greetings!
Gabriel18 said:
hola, solo me pasa con esta rom que de verdad me gusto muchisimo, con todas las cosas que trae, en estos momentos instale la CM11 pero no se no me gusta la sencilles de todo, y le he preguntado a dos personas que la tienen y no tienen este problema de todas formas la estoy descargando otra vez, espero que funcione porque es una lastima que no la pueda usar yo soy de venezuela, a la persona que le pregunte es de colombia con el E970 y le funciona todo, y otra persona que es de venezuela tiene un E975 y le funciona bien ya que esta rom es portada de ese modelo. Saludos!
hello, only happens with this rom I really a lot like, with all that brings, right now install the CM11 but no I do not like sencilles all, and I have asked two people who have it and not have this problem anyway'm downloading again, hope it works because it is a shame that can not use it I am from Venezuela, the person is asked Colombia to the E970 and it works all and another person is in Venezuela has an E975 and it works well since this rom is the cover model. Greetings!
Click to expand...
Click to collapse
Yo tambien tengo un E970 y no me pasa. (I have an E970 too and don't have this problem). Trata de hacer una instalacion limpia, borra la memoria interna tambien, guarda todo antes claro. (Do a clean instalation, wipe internal storage if necesary)
luisoman2000 said:
Yo tambien tengo un E970 y no me pasa. (I have an E970 too and don't have this problem). Trata de hacer una instalacion limpia, borra la memoria interna tambien, guarda todo antes claro. (Do a clean instalation, wipe internal storage if necesary)
Click to expand...
Click to collapse
Ok gracias voy a hacerlo! En un rato a ver espero que funcione!
Ok thanks will do! In a while to see hope it works!

[LGH340AR] Clean KDZ LG LEON LTE ARGENTINA No Carrier - Firmware limpio, sin compañía

[ENGLISH - ESPAÑOL MAS ABAJO!!]
ADVISE: First of all, remember that you are the only responsible for what you do with your phone. I'll always try to help you and share my knowledge and experience, just as others do. But please read as much as you can BEFORE trying it! Ok, let's go:
► KDZ DOWNLOAD LINK FROM LG SITE: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWC9W5Q132VMABR926A6DWJ/H340AR10a_04.kdz
I've searched a lot for this KDZ, and could finally find it at http://devtester.ro/projects/lg-firmwares/country.php?country=Argentina .
At that page it's stated as a CLARO variant, but I can confirm that it is a NO-CARRIER clean ROM for Argentina. I don't know if it works in other countries. Keep in mind that, even if everything is working perfectly (at least in my Leon), every time you boot your phone, you will receive a little advice saying "Warning! Current version is not available for user. Can't find matchest cust for NT-code..." that means that this is not a ROM meant to be used by users, but devs. That's true, but you can just dismiss that advice, by BACK button and everything work fine without carrier bloatware. Personally, I felt my device more responsive. And I'm (let's see the bright side) *happy* that I needed to try this firmware after a brick, and not having the original KDZ for my carrier. [/B]
-----------------
How to FLASH it?
You will need to install LG USB drivers, LG Mobile Support tool, download LG FLASH UTILITY 2014, and the KDZ.
I'll show a method taken from this site, the same I've followed: Note that you don't loose any data with this method, unless you factory reset.
INSTALL IN THIS ORDER:
1) LG Mobile Support Tool [atached to this same post]
2) LG United Mobile Driver 3.14.1 https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
3)LG Flash tool 2014 https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y [also atached to this same post]
After everything has been installed:
1. Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting the USB Cable to the PC
3. The Volume up button needs to be held until it reaches download mode (FIRMWARE UPDATE screen)
4. Open device manager in Windows and changed the LGE Mobile USB Serial port to COM 20
5. Open the LG Flash Tool 2014
6. Select Type: 3GQCT
7. PhoneMode: EMERGENCY
8. KDZ : Select the location where the KDZ has been downloaded
9. Click on Normal Flash
10. Click on START. And wait, it will open a new window.
11. On that window, click on "Clear update registry"
12. Country: different country
13. Language: English
14. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. WAIT UNTIL IT REBOOTS! It seems to be frozen at 100% or 99$%, but it is NOT!
Once your device is in Android, you can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Click to expand...
Click to collapse
----------------
How to avoid bricking it?
Root - In my case I could root it with KingRoot apk, the LATEST FROM THEIR SITE (not xda, not other.. but kingroot site. Others didn't work)
TWRP - Meh, I wouldn't mess with it, if you want to avoid flashing kdz. Everything started there, in my case. TWRP couldn't flash correctly.
SuperSUMe - DO NOT use this! After using it to remove kingroot app and install superSU , reboot & bricked. Another person here told me it worked for him. But in my case that was the 'root' cause for the brick. Maybe the method by W0lf works! At least you can read the script and see what does it do. And it does not cost money... meh
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[ESPAÑOL!]
AVISO: Recordá que sos el/la unico/a responsable por lo que hacés con tu celular. Siempre voy a intentar ayudarte y compartir mis conocimientos, como lo hacen el resto de los usuarios de la comunidad. Pero intentá leer lo más que puedas ANTES de intentarlo. Ok? Vamos!
► LINK DE DESCARGA DEL KDZ DESDE SITIO LG: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWC9W5Q132VMABR926A6DWJ/H340AR10a_04.kdz
Estuve buscando mucho este KDZ hasta que lo contré en http://devtester.ro/projects/lg-firmwares/country.php?country=Argentina . Ahí está listado como ser de Claro Argentina, pero puedo confirmar que es una version LIMPIA developer, la que usan luego las compañías para llenarlas de bloatware. Ehm, digo, de hermosas utilidades de la empresa. QUizá funcione para otros paises, no lo se. Tené en cuenta que, incluso si todo funciona perfecto (al menos en mi Leon) cada vez que reinicias el celular, vas a tener un pequeño mensaje que dice "Warning! Current version is not available for user. Can't find matchest cust for NT-code..." que significa que la ROm no es para usuarios finales sino developers, y es cierto, pero simplemente podes descartar ese mensaje con el boton atrás. Personalmente, siento mi dispositivo más rapido. Por un lado estoy (busquémosle el lado positivo a todo) "feliz" de haber tenido un softbrick y no tener la KDZ de personal, porque pude probar ésta.
-----------------
¿Cómo flashearla? (y me refiero al KDZ!)
Necesitás instalar LG USB drivers, LG Mobile Support tool, y descargar LG FLASH UTILITY 2014, y el KDZ.
Este método a continuación es el que yo encontré en este sitio y fue el que utilicé. No perdés ninguna data usando este método, salvo que hagas reseteo de fábrica.
INSTALAR EN ESTE ORDEN:
1) LG Mobile Support Tool [adjuntado en este post]
2) LG United Mobile Driver 3.14.1 https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
3) LG Flash tool 2014 https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y [también adjuntado en este post]
Luego de instalar todo:
1. Remover la batería y volver a colocarla
2. Conectar un extermo del cable USB a la PC y mantener presionado VOL+ mientras se conecta el otro extremo del cable al celular
3. VOL+ Tiene que mantenerse presionado hasta que aparezca la ventana de Firmware Update en el celular
4. Abrir administrador de dispositivos en Windows y cambiar el puerto COM de LGE Mobile USB Serial al COM 20
5. Abrir LG Flash Tool 2014
6. En Type seleccionar: 3GQCT
7. En PhoneMode: EMERGENCY
8. En KDZ : Seleccionar la ruta donde está la KDZ descargada (quiza sea óptimo tener todo en una carpeta en C:\, por si hay rutas largas)
9. Clickear Normal Flash
10. En la nueva ventana, clickear START. Y esperar... se abrirá una nueva ventana.
11. En esa ventana nueva, clickear "Clear update registry"
12. Country: different country
13. Language: English (yo lo hice así. Si está Spanish, quizá podes seleccionarla! O cambiar despues el idioma)
14. Clickear OK y esperar a que se abra LG MOBILE SUPPORT y reconozca el dispositivo. Esto puede tomar unos minutos, pero lo reconoce. Empieza a trabajar y al 99 o 100% parece que se frizea, pero tenes que ESPERAR a que se reinicie el dispositivo. Luego de reiniciar, ya podes sacar el USB cable. No antes de que salga de Firmware Update. Ya deberia estar funcionando sin problemas! Puede tardar un poco el primer boot.
Click to expand...
Click to collapse
----------------
¿Cómo evitar BRICKEARLO?
*Root - En mi caso lo rutié sin dramas usando el último KingRoot de SU SITIO WEB, no de xda, sino del sitio de ellos. Es una apk.
*TWRP - En mi caso no pude flashearla, y ahi empezó todo el problema. Pero no causó el root. Seguí el método "dd" y el de TWRP manager sin éxito.
*SuperSU Me - Éste guacho me lo brickeó. Un generoso compañero de XDA intentó ayudarme pasándome el dato, pero al correrlo, se brickeó. Quizá el método de W0lf funcione. Hay que probar. Al menos se puede leer el script para ver exactamente qué hace, y no cuesta dinero...
********************************** MUCHOS MÁS TUTORIALES EN MI CANAL EN YOUTUBE ******************************************
**************************** NUEVO APRENDIZAJE ► http://www.youtube.com/NuevoAprendizaje ************************************​
I find this very interesting. I wonder if it would work on my T-Mobile LG Leon LTE (H345n)...What carrier variant do you have of the phone... Also.. just out of curiousity... I'm wondering if this rom takes up less internal storage on the phone. Because that would be real cool considering most of the firmwares take up more than half of the 8 gb internal storage. Would you mind checking that out and getting back to me about it?
Yazuken1 said:
I find this very interesting. I wonder if it would work on my T-Mobile LG Leon LTE (H345n)...What carrier variant do you have of the phone... Also.. just out of curiousity... I'm wondering if this rom takes up less internal storage on the phone. Because that would be real cool considering most of the firmwares take up more than half of the 8 gb internal storage. Would you mind checking that out and getting back to me about it?
Click to expand...
Click to collapse
I guess the only difference in storage would be anything carrier-related. None of those apps are installed. That includes games, carrier apps, promotions... This is v10a-722-34 LRX21Y, Android 5.0.1
Hola leandeganis, muchas gracias man me vino de 10 el post.
Pudiste encontrar alguna rom modificada que funcione bien con el Leon?
nmastellone said:
Pudiste encontrar alguna rom modificada que funcione bien con el Leon?
Click to expand...
Click to collapse
Nope, but I'm posting all improvements I do to stock ROM in this thread: http://forum.xda-developers.com/android/development/fix-low-mic-volume-bad-quality-headset-t3270558
What model Leon do you have? I have an lgl21 which is a straight talk variant. Called LG Destiny. Do you know if in that rom there is the oem unlock option in dev settings? The reason why I'm asking is because I'm trying to figure out how to unlock my bootloader to attempt to flash the c50 recovery to my phone. Just in case I get a brick I'll try this KDZ. But once I figure out how to pull my device tree and then try to port the 5.1 KDZ for my variant. I've never dev before so this is going to be a learning experience for me.
Failbringer60 said:
What model Leon do you have? I have an lgl21 which is a straight talk variant. Called LG Destiny. Do you know if in that rom there is the oem unlock option in dev settings? The reason why I'm asking is because I'm trying to figure out how to unlock my bootloader to attempt to flash the c50 recovery to my phone. Just in case I get a brick I'll try this KDZ. But once I figure out how to pull my device tree and then try to port the 5.1 KDZ for my variant. I've never dev before so this is going to be a learning experience for me.
Click to expand...
Click to collapse
No oem unlock. Only in 5.1.1 versions
http://forum.xda-developers.com/showpost.php?p=62275619&postcount=461
Following these steps you'll be able to remove the warning. It worked in my sister's LG Spirit. Cheers
Siguiendo estos pasos van a poder sacar el cartel, funcionó en el LG Spirit de mi hermana. Saludos
Question
Hi, i have a LG Risio from Cricket, is the model -lg-H343 but i dont see this model in the list room, do you know if i can brick my phone if i install a open room of Argentina, like the H340?..What do you think?
roberto217 said:
Hi, i have a LG Risio from Cricket, is the model -lg-H343 but i dont see this model in the list room, do you know if i can brick my phone if i install a open room of Argentina, like the H340?..What do you think?
Click to expand...
Click to collapse
You can try I think it should either fail in the flash process or succeed. But I think you should better try an specific kdz for your model. lg-phone-firmware.com and devtester.ro have lot of firmwares listed. Try with your imei.
igna.98 said:
http://forum.xda-developers.com/showpost.php?p=62275619&postcount=461
Following these steps you'll be able to remove the warning. It worked in my sister's LG Spirit. Cheers
Siguiendo estos pasos van a poder sacar el cartel, funcionó en el LG Spirit de mi hermana. Saludos
Click to expand...
Click to collapse
Gracias! Probaste instalar este kdz en el spirit? O como llegaste aca?
do you have a good link for this kdz? the old one is down
Buenas gente! Podrían pasarme las especificaciones técnicas del h340 LTE ya que estoy viendo si es posible flashar al h320 una banda base para que levante LTE! Por lo visto en la pagina de LG este modelo (h320) tiene LTE pero para una compañía de México.
Hi people, can u share tecnical hardware from H340 LTE , im tinking to port an base band to H320 it seems capable but unly whit a mexican carrier..
Sorry for my bad english.
Enviado desde mi XT1045 mediante Tapatalk
Compré mi celular en musimundo. Pero aún liberado, la rom que tiene está llena de basuras y hace lento todo el sistema. Incluso tenía mal configurado el cpu con planificacion noop y governor en performance, trabajando de 1.21ghz a 1.21ghz. La batería se moría en menos de 5 horas. Horrible. Usé el Kingroot y habia aplicaciones como una tal "Aplicativos nacionails" o algo por el estilo, con una bandera brasileña en el ícono. Me pregunto para qué carajo estaba ahi consumiendo ram. Por supuesto la eliminé junto con play fotos/videos/musica, el antivirus inservible y otras pavadas que consumian recursos.
Voy a flashear esta y usar el tutorial que está por ahi que mejora el uso de memoria por parte del sistema operativo.
Se agradece el aporte.
help,ayuda para ser root LG Leon
hola como puedo rootear lg leon h340ar con android 6.0 (segui tu tutorial pero el kdz lo saque de aqui
http://forum.xda-developers.com/leon/how-to/how-to-update-lg-leon-h340n-to-android-t3393648
). cuando tengo apretado el boton de encendido + volumen bajo solo aparece la opcion de restaurar de fabrica.
¡¡¡¡¡¿¿¿¿¿Para ser root tengo que cargar el zip de superSU,pero para hacerlo necesito tener un recovery personalizado Y Para instalar un recovery personalizado tengo que ser root.!!!???
Gracias de antemano.
Ayuda!
Buenas! Necesito ayuda...estaba haciendo bien todos los pasos hasta que llegue al 10
"10. En la nueva ventana, clickear START. Y esperar... se abrirá una nueva ventana."
Cuando hago click en START se cierra la ventana, pero no aparece ninguna nueva...y se queda asi, no pasa nada...que puedo hacer?
El celu sigue en 0% y solo dice que no tengo que desconectar el USB hasta que termine el proceso.
Se agradece cualquier ayuda
Luego de hacer esto todos los datos van a ser borrados? Yo lo hice, el boot no me arrancaba, hice el flash y lo pude hacer prender pero las apps, fotos y demas datos seguían ahí
che, tengo dos problemas: No puedo bajar el kdz, me dice "no file found" y 2do: tengo el kdz de claro (justo el stock de mi cel) y cada vez que flasheo el kdz el cel se queda en la bootscreen y se reinica
Sabes como puedo fixearlo?
I CANT DOWNLOAD ROM!
never download the rom from site!
blank page from the link...
totto210 said:
I CANT DOWNLOAD ROM!
never download the rom from site!
blank page from the link...
Click to expand...
Click to collapse
Como puedo descargar el KDZ?

Como actualizar LG Leon H340N a Android M y desbloquear el Bootloader

Ante todo esta es una copia del post original de GethPrime, pero en español.
This is a copy of the original thread created by GethPrime, but this thread is in spanish.
1. Lo primero que necesitas es descargar el archivo zip que contiene la rom marshmallow y las herramientas que usaremos en este tutorial:
https://mega.nz/#!QgwDHYpB!7TCpc0_yc..._8XIXRJxoxOYHQ
2. Después de descargar y descomprimir los archivos, abre como administrador el programa llamado "LG-Mobile-Driver_v4.0.4.0.exe" e instalalo. A continuacion sigue estas instrucciones.
3. Apaga el teléfono y aprieta la tecla "Volumen arriba". Luego conecta el cable USB a tu LG Leon y espera a que aparezca la pantalla que dice "Firmware Update". Cuando aparezca esa pantalla suelta la tecla "Volumen arriba" y continua al paso 4.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Entra a la carpeta LG Flash Tool 2014 y abre el programa "LGFlashTool2014.exe".
Cuando el programa esté abierto, cambia Select type por "3GQCT", PhoneMode por "Emergency" y abre el archivo .KDZ llamado H340n20A_00_0512.kdz".
Luego haz click en "Normal Flash".
5. Una ventana emergente con el nombre "Read Phone Information" se va abrir. Haz click en el boton "Start".
6. Otra nueva ventana se abrira con el titulo "Select Country & Language". Haz click en "Clear phone Software update Registry". En la cajita "Different Country" elije el lenguaje español y hecho esto haz click en OK.
7. El programa ahora empezará a flashear tu teléfono con el nuevo firmware. Asegúrate de tener el teléfono bien conectado, en un lugar donde no se mueva y no toques nada hasta que termine. Luego de flashear el teléfono, este se reiniciará y es el fin del proceso.
Como desbloquear el bootloader después de flashear el nuevo firmware:
Ve a "Ajustes" -> "General" -> "Acerca del teléfono" -> "Información de software" -> y toca varias veces en "Número de compilación" hasta que se activen las opciones de desarrollador.
Vuelve atrás dos veces y verás un nuevo menú que se llama "Opciones de desarrollador". Entra allí y activa la casilla "Habilitar desbloqueo OEM".
Funciona, mas aqui no brasil meu chip so aparece emergency call only, tienes alguma ideia?
clave
cual es la clave de cifrado de Mega?
LA PASS?
hetereo69 said:
cual es la clave de cifrado de mega?
Click to expand...
Click to collapse
quie pasaa
alguien sabe como hace para poder utilizar la memoria sd como interna en 6.0 ?y si funciona bien?.. lei que era con comandos adb creo..pero no encuentro un tutorial
Podria rootear con esto del boot loader?
He.Art said:
Ante todo esta es una copia del post original de GethPrime, pero en español.
This is a copy of the original thread created by GethPrime, but this thread is in spanish.
1. Lo primero que necesitas es descargar el archivo zip que contiene la rom marshmallow y las herramientas que usaremos en este tutorial:
https://mega.nz/#!QgwDHYpB!7TCpc0_yc..._8XIXRJxoxOYHQ
2. Después de descargar y descomprimir los archivos, abre como administrador el programa llamado "LG-Mobile-Driver_v4.0.4.0.exe" e instalalo. A continuacion sigue estas instrucciones.
3. Apaga el teléfono y aprieta la tecla "Volumen arriba". Luego conecta el cable USB a tu LG Leon y espera a que aparezca la pantalla que dice "Firmware Update". Cuando aparezca esa pantalla suelta la tecla "Volumen arriba" y continua al paso 4.
4. Entra a la carpeta LG Flash Tool 2014 y abre el programa "LGFlashTool2014.exe".
Cuando el programa esté abierto, cambia Select type por "3GQCT", PhoneMode por "Emergency" y abre el archivo .KDZ llamado H340n20A_00_0512.kdz".
Luego haz click en "Normal Flash".
5. Una ventana emergente con el nombre "Read Phone Information" se va abrir. Haz click en el boton "Start".
6. Otra nueva ventana se abrira con el titulo "Select Country & Language". Haz click en "Clear phone Software update Registry". En la cajita "Different Country" elije el lenguaje español y hecho esto haz click en OK.
7. El programa ahora empezará a flashear tu teléfono con el nuevo firmware. Asegúrate de tener el teléfono bien conectado, en un lugar donde no se mueva y no toques nada hasta que termine. Luego de flashear el teléfono, este se reiniciará y es el fin del proceso.
Como desbloquear el bootloader después de flashear el nuevo firmware:
Ve a "Ajustes" -> "General" -> "Acerca del teléfono" -> "Información de software" -> y toca varias veces en "Número de compilación" hasta que se activen las opciones de desarrollador.
Vuelve atrás dos veces y verás un nuevo menú que se llama "Opciones de desarrollador". Entra allí y activa la casilla "Habilitar desbloqueo OEM".
Click to expand...
Click to collapse
as
Esto funcionaria con un LG H340AR? Es basicamente lo mismo pero la version de Argentina.
As per forum rules all posts must be in English or provide an English translation.
Thread closed
Thanks

Have a locked optus Mate 20 Pro, used Hiproxy to upgrade to EMUI 12, I rolled back and broke the OS

Hey guys im very new here take it easy on me.
I have a LYA-L09 model Mate 20 pro. For the life of me im not sure what i did wrong.
So i thought i would be clever and download EMUI 12 via the hiproxy plugin seen below and hisuite to my perfectly working stock Optus locked phone Australian version. It was great for a while and then i didnt like that gpay wasnt working so i tried rolling back and failed miserably, when it reboots a black screen with yellow text tells me the device has loaded a different operating system.
Maybe its screwed im not sure but i think you might be able to tell me. I tried All these stock roms seen below to downgrade using the Dload method with usb stick attached to phone using the updater in the recovery mode and no luck, lots of fails.
So now i have nothing but a stock recover mode with no usb debugging enabled i cant even fastboot adb even when im in fastboot mode holding power and down, Tried the wireless recovery method and failed,.
Is there a way to at least fix the EMU 12 and at least getting something to work if i cant rollback anymore, or do i pretty much have a bricked phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what i used with hiproxy to get emui 12, With my phone with no usb debugging enabled and no way for Hiproxy to connect anymore to my phone, is there a way to get these packages below so i can reinstall 12 if i can't rollback anymore or is this only done with hi proxy and enabled debugging. I have probably missed a bunch of information and i apologise hopefully someone get shed some light.
I have Eft pro but im not sure if this is going to do anything...
Oh man no good at all, I plugged mine in to update it and it won't find the emui 12 update. I also have the other version of the phone (LYA-L29) and it updated via this method zero problem was hoping for the same result with the (lya-l09) variant but can't find a version.
Have you tried to download one of the old AU firmware? sounds like your having trouble getting into recovery though which may not help
Glomas1 said:
Have you tried to download one of the old AU firmware? sounds like your having trouble getting into recovery though which may not help
Click to expand...
Click to collapse
I can pretty much get into recovery just no usb debugging, all those firmwares you see in my post ive tried.. I cant find any aussie firmware for my LYA-L09, pretty sure this is the reason why its not flashing, if anyone has for my phone would be great, i think its C432.
Bummer, have you tried recovery in fast boot with a flash drive instead of using the computer?
Also from memory I think from recovery or fast boot you use different drivers with the PC as it does not recognise the phone properly otherwise
Glomas1 said:
Bummer, have you tried recovery in fast boot with a flash drive instead of using the computer?
Also from memory I think from recovery or fast boot you use different drivers with the PC as it does not recognise the phone properly otherwise
Click to expand...
Click to collapse
Yeah i saved the firmware in a folder called dload on my usb to c thumb drive and then the firmware either fail or install and then it goes back to the "your device has loaded a different operating system" just constant loop
Zymdings said:
Sí, guardé el firmware en una carpeta llamada dload en mi memoria usb a c y luego el firmware falla o se instala y luego vuelve a "su dispositivo ha cargado un sistema operativo diferente" solo un bucle constante
Click to expand...
Click to collapse
Hello Zymdings, something happened to me, similar to my mate 20 pro LYA-L09, I had it with android 10 and EMUI 11, with carrier ROM (TIGO C045) I changed it in order to update it to emui 12 because I didn't get an update yet that many times the telephone operators block updates, so I looked for a stock ROM for my LYA-L09 model, and since I couldn't find a ROM with emui 11, which is what I was on, I decided to install a ROM with emui 10 but from EUROPE (C432 ) because this is the one that has the update to emui 12 (DATA I got it from the firm finder V2 servers, I leave you the link: https://professorjtj.github.io/v2/) “YOU MUST PLACE YOUR CELL PHONE MODEL IN THIS PAGE"
I clarify that the method I used was by "dload", I will look for the download link from where I downloaded the ROM with European emui 10, since my internet is slow to upload almost 5 gb, apologies.
The ROM has a folder called dload which contains 3 files.
When installing by dload dialing from the cell phone *#*#2846579#*#* good is the process by dload you can search in inter or if you can't find it ask me friend.
Initially it installed well because I got to 100%, but when I restarted the same thing happened to you, that is to say that I got "the device has loaded a different operating system".
Salio que falló, buscando en internet en XDA encontré que era porque la ROM era diferente a la que tenía instalada entonces lo que hice fue cambiar lo siguiente: (solo estos dos archivos los cambié, el “update_sd_base” lo deje asi)
update_sd_cust_LYA-L09_hw_eu POR update_sd_cust_LYA-L09_tigo_la
update_sd_preload_LYA-L09_hw_eu_R1 POR update_sd_preload_LYA-L09_tigo_la_R1
Cuando hice esto, estaba instalado y listo, pensé que todo estaba bien, ya no tenía el inicio de TIGO, que era la ROM del operador, pero luego me di cuenta de que mi batería no cargaba rápido a pesar de que tenía mi cargador con una super carga que mi computadora no reconoció. Teléfono móvil. Lo que pasa es que cuando averigüé más me enteré de lo siguiente:
- ALERTA: La actualización a la última versión de EMUI 11 desactiva la carga rápida, el arranque rápido, la conexión USB y TestPoint de su teléfono.
- La única forma de solucionarlo es actualizar vía OTA, Erecovery o Dload por tarjeta de memoria a la última versión de EMUI 11.
Todo lo demás creo que funciona bien, algo más les cuento que en mi celular no aparece el explorador de archivos por lo que tuve que instalar uno desde la play store.
NOTA: He probado por Erecovery, por OTA y no lo he conseguido, mi esperanza es encontrar una ROM stock para hacerlo de nuevo por dload pero hasta hoy y casi una semana no he encontrado nada. Si tienes alguna información, te lo agradecería.
My whatsapp Bolivia +591 63931217 I am Daniel.
Yeh im not able to boot into the mobile operating system im actuallyt unable to enable debugging forgot to switch it on, and now im screwed Do you know if im able to fix the emui 12 that i damaged.. I cant download it anywhere only via hiproxy which i have no access to now because no fastboot
Zymdings said:
Hey guys im very new here take it easy on me.
I have a LYA-L09 model Mate 20 pro. For the life of me im not sure what i did wrong.
So i thought i would be clever and download EMUI 12 via the hiproxy plugin seen below and hisuite to my perfectly working stock Optus locked phone Australian version. It was great for a while and then i didnt like that gpay wasnt working so i tried rolling back and failed miserably, when it reboots a black screen with yellow text tells me the device has loaded a different operating system.
Maybe its screwed im not sure but i think you might be able to tell me. I tried All these stock roms seen below to downgrade using the Dload method with usb stick attached to phone using the updater in the recovery mode and no luck, lots of fails.
So now i have nothing but a stock recover mode with no usb debugging enabled i cant even fastboot adb even when im in fastboot mode holding power and down, Tried the wireless recovery method and failed,.
Is there a way to at least fix the EMU 12 and at least getting something to work if i cant rollback anymore, or do i pretty much have a bricked phone.
View attachment 5716995
This is what i used with hiproxy to get emui 12, With my phone with no usb debugging enabled and no way for Hiproxy to connect anymore to my phone, is there a way to get these packages below so i can reinstall 12 if i can't rollback anymore or is this only done with hi proxy and enabled debugging. I have probably missed a bunch of information and i apologise hopefully someone get shed some light.
View attachment 5716997
Click to expand...
Click to collapse
Hi. I have an Australian Huawei Mate 20 Pro LYA-L29 (C636) and I'm stuck with Android 9, didn't get any updates for the last 3 years. Could you give detailed instructions how to flash EMUI 12 (C432) via HiProxy please? Thanks
Zymdings said:
Hey guys im very new here take it easy on me.
I have a LYA-L09 model Mate 20 pro. For the life of me im not sure what i did wrong.
So i thought i would be clever and download EMUI 12 via the hiproxy plugin seen below and hisuite to my perfectly working stock Optus locked phone Australian version. It was great for a while and then i didnt like that gpay wasnt working so i tried rolling back and failed miserably, when it reboots a black screen with yellow text tells me the device has loaded a different operating system.
Maybe its screwed im not sure but i think you might be able to tell me. I tried All these stock roms seen below to downgrade using the Dload method with usb stick attached to phone using the updater in the recovery mode and no luck, lots of fails.
Así que ahora no tengo nada más que un modo de recuperación de stock sin la depuración USB habilitada. Ni siquiera puedo iniciar el adb rápido, incluso cuando estoy en el modo de inicio rápido manteniendo presionado el botón de encendido y apagado. Intenté el método de recuperación inalámbrica y fallé.
¿Hay alguna manera de al menos arreglar el EMU 12 y al menos hacer que algo funcione si ya no puedo retroceder, o tengo un teléfono bloqueado?
View attachment 5716995
Esto es lo que usé con hiproxy para obtener emui 12, con mi teléfono sin depuración USB habilitada y sin forma de que Hiproxy se conecte más a mi teléfono, ¿hay alguna manera de obtener estos paquetes a continuación para poder reinstalar 12 si puedo? t revertir más o esto solo se hace con hi proxy y depuración habilitada. Probablemente me he perdido un montón de información y me disculpo, espero que alguien arroje algo de luz.
View attachment 5716997
Click to expand...
Click to collapse
al final que hizo?

Categories

Resources