Root method for 5.1.1 for the SM-G360T1 THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
Kernel set to permissive
Otherwise stock
So here's the deal. Stupid simple.
Before you do anything, go to settings/about device and tap Build Number til you unlock dev options. Go into dev options and make sure OEM Unlock is checked. Now you can continue.
1. Put Phone in Download mode
2. Open Odin
3. Connect Phone
4. Put Kernel in AP Slot
5.Flash it
6. Reboot and profit
Notes:
Download SuperSu from the Playstore. Its not included.
If at first it doesnt boot, pull the battery and reboot.
Video Tutorial of Installation Thanks to @TheDerekHarper
https://www.youtube.com/watch?v=RWm3auBSsU4
Download
Do NOT mirror this link. Period.
[FONT="Lucida Sans]links removed. It's outdated by years lol[/URL][/FONT]
[B][FONT="Lucida Sans Unicode"]Special thanks to:
@g.lewarne for the obvious reason of being awesome and his root method for the s6.
@bogarty for testing multiple tests
@Chainfire for SuperSU
[/B][/FONT]
Heres the kernel source that is set to permissive and will allow root if anyone wants to fork it and build a kernel:
Kernel Source Set to Permissive for the G360T1
Thank you for all your work!!!
Thanks For This Post And The Root For You And The Other Dude
ShinySide said:
Also mine
Click to expand...
Click to collapse
Glad It Works Just Tried It Out Hope We Get Some Roms And Other Stuff Like That
ShinySide said:
Also mine
Click to expand...
Click to collapse
2 in one day crazy!
please help m i could not root my samsung with this method
Deandre7452 said:
Glad It Works Just Tried It Out Hope We Get Some Roms And Other Stuff Like That
Click to expand...
Click to collapse
i could ot root mine,,root failed please help me:crying:
osk4rin said:
i could ot root mine,,root failed please help me:crying:
Click to expand...
Click to collapse
Hmmm...make sure that you have:
1) The "SM-G360T1".
2) The latest firmware: "G360T1UVU1AOFA".
3) Followed all the steps in the OP.
Sent from my SM-G360T1 using Tapatalk
osk4rin said:
i could ot root mine,,root failed please help me:crying:
Click to expand...
Click to collapse
Can't help if you're not actually going to explain how "root failed"
Root process fail (odin)
ShinySide said:
Can't help if you're not actually going to explain how "root failed"
Click to expand...
Click to collapse
Hi there!
I tried to root my Samsung g360t1 followed all the steps.
I have the latest firmware.,I attached the file on Odin and at the end at
The process fail.
Can I have your help please!!thanks
osk4rin said:
Hi there!
I tried to root my Samsung g360t1 followed all the steps.
I have the latest firmware.,I attached the file on Odin and at the end at
The process fail.
Can I have your help please!!thanks
Click to expand...
Click to collapse
Change usb ports, try different cable,make sure drivers are installed, disable/Uninstall kies if you have it installed on pc.
The flashing part went fine. then the reboot and I tried to install SuperSU. It wants to update the binary and has tried several times with no luck. then it reboots and now wont come back on..... I got this phone yesterday,
Longturd said:
The flashing part went fine. then the reboot and I tried to install SuperSU. It wants to update the binary and has tried several times with no luck. then it reboots and now wont come back on..... I got this phone yesterday,
Click to expand...
Click to collapse
Just dont update it. Su included is the absolute latest already. Its actually the 2.49 beta
ShinySide said:
Just dont update it. Su included is the absolute latest already. Its actually the 2.49 beta
Click to expand...
Click to collapse
root checker says its not rooted..... something went wrong but I have flashed a bunch of phones and Im pretty sure I did right.
.I have a notification that says "security notice" and some thing about unauthorized action. reboot to restore
Longturd said:
root checker says its not rooted..... something went wrong but I have flashed a bunch of phones and Im pretty sure I did right.
.I have a notification that says "security notice" and some thing about unauthorized action. reboot to restore
Click to expand...
Click to collapse
You are a G360T1 and not any other variant correct?
ShinySide said:
You are a G360T1 and not any other variant correct?
Click to expand...
Click to collapse
yes.... would not make that mistake
the phone is working but there is no root
Longturd said:
yes.... would not make that mistake
the phone is working but there is no root
Click to expand...
Click to collapse
Alright Ill look into it when I get a minute. Out of the 50 downloads over night no one else has mentioned.
ShinySide said:
Alright Ill look into it when I get a minute. Out of the 50 downloads over night no one else has mentioned.
Click to expand...
Click to collapse
does oem unlocking matter? in developer options
the phone is cool now. I killed the warranty and dont have root but there is hope
I'm getting an error message in download mode...
"Custom Binary(boot) Blocked by FAP Lock"
Sent from my SM-G360T1 using XDA Free mobile app
givo7192 said:
I'm getting an error message in download mode...
"Custom Binary(boot) Blocked by FAP Lock"
Sent from my SM-G360T1 using XDA Free mobile app
Click to expand...
Click to collapse
fix: open settings do a search for reavtivation lock and sign into your samsung account and disable it
error on dowload mode
ShinySide said:
fix: open settings do a search for reavtivation lock and sign into your samsung account and disable it
Click to expand...
Click to collapse
i have the same message!! on download mode
custom Binary(boot) Blocked by FAP lock
any help please master?
Related
MOD EDIT: Closed for violation of XDA Rules
Hello Everyone Sextape and the Gang Here,
This is a Root Solution For The Samsung Galaxy IV Verizon Variant:
Thanks to our source for this!
LINKREMOVED
Like our work go to our site and click an AD it helps
DO NOT MIRRROR ANY OF THE FILES PROVIDED BY OUR TEAM "NO MIRRORS ALLOWED" THANKS TO OUR SOURCES YOU GUYS ROCK!!!
Thanks! it worked! My GS4 is now rooted!
what about the bootloader?
jellydroid13 said:
Thanks! it worked! My GS4 is now rooted!
Click to expand...
Click to collapse
I'm getting "Unable to read directory" when I try to download Odin. Could someone mirror this? And will Odin 3.07 work as well?
wolfgrrl said:
I'm getting "Unable to read directory" when I try to download Odin. Could someone mirror this? And will Odin 3.07 work as well?
Click to expand...
Click to collapse
I used 3.07 and it worked fine -- You can also navigate to the updated rwilco12 repository, which is here: http://www.rwilco12.com/downloads.php?dir=Files/Misc Files
eiddor said:
I used 3.07 and it worked fine -- You can also navigate to the updated rwilco12 repository, which is here: http://www.rwilco12.com/downloads.php?dir=Files/Misc Files
Click to expand...
Click to collapse
I found that after I posted Thanks for the reply tho! How do you like your rooted S4?
wolfgrrl said:
I found that after Iposted Thanks for the reply tho! How do you like your rooted S4?
Click to expand...
Click to collapse
Well, I've only used it to run Root Explorer and to fire up Titanium Backup, but so far, so good!
jellydroid13 said:
Thanks! it worked! My GS4 is now rooted!
Click to expand...
Click to collapse
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
cjkacz said:
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
Click to expand...
Click to collapse
Here is the stock firmware: http://forum.xda-developers.com/showthread.php?t=2289325
---------- Post added at 07:54 AM ---------- Previous post was at 07:49 AM ----------
jellydroid13 said:
Thanks! it worked! My GS4 is now rooted!
Click to expand...
Click to collapse
Have you rebooted yet?
wolfgrrl said:
Here is the stock firmware: http://forum.xda-developers.com/showthread.php?t=2289325
---------- Post added at 07:54 AM ---------- Previous post was at 07:49 AM ----------
Have you rebooted yet?
Click to expand...
Click to collapse
Holy crap thanks man! Worked and I'm up and running. Scared me though! I guess I'll wait a while to root/unlock this thing
cjkacz said:
Holy crap thanks man! Worked and I'm up and running. Scared me though! I guess I'll wait a while to root/unlock this thing
Click to expand...
Click to collapse
You're welcome And I'm a lady :silly:
wolfgrrl said:
You're welcome And I'm a lady :silly:
Click to expand...
Click to collapse
I'm sorry should have known by the name. Duhhh Thanks again!
Sent from my SCH-I545 using Tapatalk 2
cjkacz said:
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
Click to expand...
Click to collapse
i got that as well, but only in between loading the kernal and flashing su. I didn't reboot like it asked, i just continued flashing su then let the motochopper script reboot for me, so i'm all good it seems for now.
Thanks so much for the info sextape!!!
edit. nm, it showed up again, but i'm not going to reboot until i have the stock firmware downloaded. I wonder if i freeze SEAndroid, if that would prevent the warning.
As I stated yesterday, I'd be very impressed if we had a working root method by today (when I should be receiving my device this evening). Low and behold, color me impressed. SXTP you are truly a legend good sir! :good:
cjkacz said:
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
Click to expand...
Click to collapse
By "unauthorized software warning" do you mean the little triangle in the notification bar and the message saying "Device detected an application attempting unpermitted access" and asking you to reboot? That is because you have USB debugging checked in developer options. There is another option below that says Verify apps via USB, it's grayed out so I can't uncheck it, BUT if you freeze SEAndroid 1.0 with TiBu the warning goes away.
mikebuck69 said:
By "unauthorized software warning" do you mean the little triangle in the notification bar and the message saying "Device detected an application attempting unpermitted access" and asking you to reboot? That is because you have USB debugging checked in developer options. There is another option below that says Verify apps via USB, it's grayed out so I can't uncheck it, BUT if you freeze SEAndroid 1.0 with TiBu the warning goes away.
Click to expand...
Click to collapse
Initially I got that but then the phone rebooted and a warning came in the screen and said that unauthorized software has been detected please take your phone to the nearest Verizon retailer. The phone would not go past that screen
Sent from my SCH-I545 using Tapatalk 2
i have the debug checked in development settings but when I plug it into the computer it does not say that debug mode is on like it did with the s3 so how do i know if it is or not.
cjkacz said:
Initially I got that but then the phone rebooted and a warning came in the screen and said that unauthorized software has been detected please take your phone to the nearest Verizon retailer. The phone would not go past that screen
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Odd, I've rebooted a few times and haven't had that happen. I tried rebooting with the warning and it took me to the samsung splash screen with the unlocked padlock and it said "recovery loading" and tried to do a software update. I managed to hit the power button and stop that from happening. Not sure WHAT would have happened if that had completed.
mikebuck69 said:
Odd, I've rebooted a few times and haven't had that happen. I tried rebooting with the warning and it took me to the samsung splash screen with the unlocked padlock and it said "recovery loading" and tried to do a software update. I managed to hit the power button and stop that from happening. Not sure WHAT would have happened if that had completed.
Click to expand...
Click to collapse
Yeah I was actually using the phone for about 10 minutes. Last thing i was doing was playing with goo app. I am coming from a gnex and rooted/unlocked via wugfresh toolkit. I assume that eventually someone will make one for this phone? (Once the bootloader is unlocked)
Sent from my SCH-I545 using Tapatalk 2
do i reboot in between installing the kernel and running the motochopper
I need some help I used to have my phone rooted then I got an update to 4.3 since this update I have not been able to get root back on my phone. It seems that KNOX is blocking this process. Instead I tried to simply put a ROM on using ADB. I cannot figure out what is going on when I tried to transfer the file it said "Signature Verification Failed" I have reset my phone. I turned on everything necessary in developer options. I have uninstalled all my phone drivers and kies completely then re-installed.
I have watched Tutorial video after tutorial video and I cannot figure it out. If someone can help me I would GREATLY appreciate it.
waaldron said:
I need some help I used to have my phone rooted then I got an update to 4.3 since this update I have not been able to get root back on my phone. It seems that KNOX is blocking this process. Instead I tried to simply put a ROM on using ADB. I cannot figure out what is going on when I tried to transfer the file it said "Signature Verification Failed" I have reset my phone. I turned on everything necessary in developer options. I have uninstalled all my phone drivers and kies completely then re-installed.
I have watched Tutorial video after tutorial video and I cannot figure it out. If someone can help me I would GREATLY appreciate it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2565758
That will root your phone.
Then install safestrap.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
http://forum.xda-developers.com/showthread.php?t=2565758
That will root your phone.
Then install safestrap.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I have actually followed the instructions on that thread before and have had no luck
waaldron said:
I have actually followed the instructions on that thread before and have had no luck
Click to expand...
Click to collapse
What went wrong specifically?
Sent from my SCH-I545 using Tapatalk
joshm.1219 said:
What went wrong specifically?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Not exactly sure I had supersu on my phone and it just talked about disabling knox then fails to disable.
Is it possible to get the USB drivers without samsung kies?
waaldron said:
Not exactly sure I had supersu on my phone and it just talked about disabling knox then fails to disable.
Is it possible to get the USB drivers without samsung kies?
Click to expand...
Click to collapse
IDK I didn't have to use that method since I'm on mdk. I would search that thread for answers though.
Sent from my SCH-I545 using Tapatalk
waaldron said:
Not exactly sure I had supersu on my phone and it just talked about disabling knox then fails to disable.
Is it possible to get the USB drivers without samsung kies?
Click to expand...
Click to collapse
Yea go over to that thread and ask k1mu . tell him exactly what the error is or what's happens and you'll get fixed up. You should get an answer pretty fast.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Yea go over to that thread and ask k1mu . tell him exactly what the error is or what's happens and you'll get fixed up. You should get an answer pretty fast.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
What do you mean mean by "that" thread could you link me?
waaldron said:
What do you mean mean by "that" thread could you link me?
Click to expand...
Click to collapse
He means the thread link that was posted in the first reply.
Sent from my SCH-I545 using Tapatalk
So I cannot post on that thread, but I did revisit it and reset my phone and went through the instructions carefully.(this time on a different computer) I actually managed to disable knox and get SuperSU back on my phone. It still says the binary needs to be updated and when I click continue, then click normal since I do not have a custom recovery. It attempts to install, but then I get the message- Installation failed Please reboot and try again. So I tried to reboot my phone a few times to see if it would work and no luck. Any ideas?
EDIT: I also tried to install SuperSU update using my sdcard and still no luck. Signature verification problem.
waaldron said:
So I cannot post on that thread, but I did revisit it and reset my phone and went through the instructions carefully.(this time on a different computer) I actually managed to disable knox and get SuperSU back on my phone. It still says the binary needs to be updated and when I click continue, then click normal since I do not have a custom recovery. It attempts to install, but then I get the message- Installation failed Please reboot and try again. So I tried to reboot my phone a few times to see if it would work and no luck. Any ideas?
EDIT: I also tried to install SuperSU update using my sdcard and still no luck. Signature verification problem.
Click to expand...
Click to collapse
What kind of phone is this you're talking about? And what do you mean about SuperSU update "using my sdcard"?
k1mu said:
What kind of phone is this you're talking about? And what do you mean about SuperSU update "using my sdcard"?
Click to expand...
Click to collapse
Samsung Galaxy S4 by Verizon. I found an updated version of SuperSU and tried to update using adb shell
I flashed twrp, and then flashed kingroot. All in the first boot, my bad but afterwards I didn't have a root and the wifi tries to turn on but fails every time. any idea what happened?
shours said:
I flashed twrp, and then flashed kingroot. All in the first boot, my bad but afterwards I didn't have a root and the wifi tries to turn on but fails every time. any idea what happened?
Click to expand...
Click to collapse
You need to give more information than this like your device and firmware. It may be something as simple as setting secure storage to false
sawdoctor said:
You need to give more information than this like your device and firmware. It may be something as simple as setting secure storage to false
Click to expand...
Click to collapse
Its a Galaxy S5 SM-G900W8 Android Version 6.0.1 it was twrp 3.1.0-0 And I used a recovery tar but the problem stays the same after a factory reset
it doesn't detect SIM, use mobile data and it tries to turn on WIFI but fails after a few minutes
Why are you using kingroot on a s5? You will probably need to Odin stock and then either use chainfire auto root or just flash su zip through twrp
Sent from my Mi Max using Tapatalk
sawdoctor said:
Why are you using kingroot on a s5? You will probably need to Odin stock and then either use chainfire auto root or just flash su zip through twrp
Sent from my Mi Max using Tapatalk
Click to expand...
Click to collapse
I had over confidence I guess, let that be a lesson for anyone reading this thread.
shours said:
I had over confidence I guess, let that be a lesson for anyone reading this thread.
Click to expand...
Click to collapse
I don't think kingroot or framroot work on sammy devices due to selinux issues
sawdoctor said:
Why are you using kingroot on a s5? You will probably need to Odin stock and then either use chainfire auto root or just flash su zip through twrp
Sent from my Mi Max using Tapatalk
Click to expand...
Click to collapse
defiantly helped
This is kind of storytime... I got the application by redeeming a code that was posted as a gift on their fanpage at Facebook. I had to sent them via Telegram the Google play ID order, something that I couldn't find. I explained that and they understood me and said that if I could send the code that I got the application, they are gonna send be the actual files. So I received the files and I'm ready to begin! I don't have much spare time so I'm gonna do this whenever I have the time to do so. Wish me luck! I'm gonna keep you guys updated and let you know what happened.
Andriano24 said:
This is kind of storytime... I got the application by redeeming a code that was posted as a gift on their fanpage at Facebook. I had to sent them via Telegram the Google play ID order, something that I couldn't find. I explained that and they understood me and said that if I could send the code that I got the application, they are gonna send be the actual files. So I received the files and I'm ready to begin! I don't have much spare time so I'm gonna do this whenever I have the time to do so. Wish me luck! I'm gonna keep you guys updated and let you know what happened.
Click to expand...
Click to collapse
knox to 0x0?
DaniPS2002 said:
knox to 0x0?
Click to expand...
Click to collapse
Yeah that's what the app suppose to do
Andriano24 said:
Yeah that's what the app suppose to do
Click to expand...
Click to collapse
the app name is knox reset 0x0 (0)?
DaniPS2002 said:
the app name is knox reset 0x0 (0)?
Click to expand...
Click to collapse
Yes
Okay, let we know!
MarcusBS said:
Okay, let we know!
Click to expand...
Click to collapse
I've stuck in a step. Sadly I cannot complete now the instructions given because I can't turn the systemless root into system mode
Andriano24 said:
I've stuck in a step. Sadly I cannot complete now the instructions given because I can't turn the systemless root into system mode
Click to expand...
Click to collapse
What do you mean you can't turn systemless root into system mode?
ashyx said:
What do you mean you can't turn systemless root into system mode?
Click to expand...
Click to collapse
https://android.stackexchange.com/q...om-systemless-root-to-system-traditional-root
Check that out
Andriano24 said:
https://android.stackexchange.com/q...om-systemless-root-to-system-traditional-root
Check that out
Click to expand...
Click to collapse
I actually meant what is preventing you from installing supersu in system mode, it's simple enough? Also which device is this?
ashyx said:
I actually meant what is preventing you from installing supersu in system mode, it's simple enough? Also which device is this?
Click to expand...
Click to collapse
I flash the super su, then try to full unroot, my phone reboots and I press the combination of keys to go to twrp recovery, go to terminal thingy, type the code and the last step I do is flashing again the supersu. But then I boot into system I stuck on the logo screen
Andriano24 said:
I flash the super su, then try to full unroot, my phone reboots and I press the combination of keys to go to twrp recovery, go to terminal thingy, type the code and the last step I do is flashing again the supersu. But then I boot into system I stuck on the logo screen
Click to expand...
Click to collapse
You've lost me Tbh. I don't understand what steps you are performing and why.
Type what code?
ashyx said:
You've lost me Tbh. I don't understand what steps you are performing and why.
Type what code?
Click to expand...
Click to collapse
Didn't you see the post I send you? The "code" is
Echo SYSTEMLESS=false > /data/.supersu
Andriano24 said:
Didn't you see the post I send you? The "code" is
Echo SYSTEMLESS=false > /data/.supersu
Click to expand...
Click to collapse
OK first things first. You have to reinstall SuperSu for that code to work AND a patched boot.img.
Second for what reason do you need SuperSU to be in system mode?
[Deleted by me]
ashyx said:
OK first things first. You have to reinstall SuperSu for that code to work AND a patched boot.img.
Second for what reason do you need SuperSU to be in system mode?
Click to expand...
Click to collapse
Thank you for your time. But can you wrote the full steps below? Because I'm tired of getting into a bootloop only because I am not able to understand the instructions! You can do it only of you want to!
Secondary, the Knox Reset app has a plugin to make the success rate bigger of turning the 0x1 back to 0x0 (as far as I know) and the plugin needs system mode root :/
Lol right now I'm not rooted because I'm tired of the bootloops while rying to system mode root
Andriano24 said:
Lol right now I'm not rooted because I'm tired of the bootloops while rying to system mode root
Click to expand...
Click to collapse
Easiest way is to reroot systemless. After rooting back up the boot partition with TWRP.
Unroot then install SuperSU in system mode.
Finally restore the boot.img from the backup.
Reboot.
Note also be aware that system mode root is hit and miss on devices running nougat.
You still haven't stated which device?
ashyx said:
Easiest way is to reroot systemless. After rooting back up the boot partition with TWRP.
Unroot then install SuperSU in system mode.
Finally restore the boot.img from the backup.
Reboot.
Note also be aware that system mode root is hit and miss on devices running nougat.
You still haven't stated which device?
Click to expand...
Click to collapse
Oh sorry I forgot about that! I have the Samsung galaxy A5 2017 running...... nougat.....
Andriano24 said:
Oh sorry I forgot about that! I have the Samsung galaxy A5 2017 running...... nougat.....
Click to expand...
Click to collapse
Then you have a 50/50 chance of root working in system mode.
Also tbh I think this knox app is fake or it just fakes knox to 0x0 the same way Magisk can.
***UPDATE***
To anyone who comes across this, I fixed the issue by following a guide by @AddictedA1 on this post . Note that your case might be different as in you might be locked out of device and unable to change OEM lock from settings. This was the case with me so I just follwed the FRP/Knox bypass guide, accessed settings, enabled OEM unlocking and the proceeded with the above guide.
If you have any questions then just message me.
***************
So today we were given Samsung Galaxy Tab A7 lites by our state government for promoting technology in the state (elections in a few months go figure).
The issue was that it comes with knox which has government agency as the admin.
I tried rooting by flashing magisk flashed AP following this guide (for samsung galaxy tab A7) but now after startup it asks me to connect to the Internet and, runs a few checks and says "cant create work profile because security policy prevents this on a custom os".
It's just stuck at that message and can't get out of there.
I've never had any Samsung device before so I might be doing something wrong. Any help on how to get out of this is appreciated. Thanks
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
alp47470 said:
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
Click to expand...
Click to collapse
same here bro yogiji , Knox is inside samsung cant get it out by adb , safemode, cant root magisk . Only option left flash twrp install lineage os.. but cant find exact twrp model tar one gta7lite .. any idea ?
AddictedA1 said:
same here bro yogiji , Knox is inside samsung cant get it out by adb , safemode, cant root magisk . Only option left flash twrp install lineage os.. but cant find exact twrp model tar one gta7lite .. any idea ?
Click to expand...
Click to collapse
Sorry, I couldn't find any TWRP so far. If i do will surely let you knoww.
alp47470 said:
Sorry, I couldn't find any TWRP so far. If i do will surely let you knoww.
Click to expand...
Click to collapse
Im trying to port TWRP , hopefully something will work main thing is configuring fstab right partitions
AddictedA1 said:
Im trying to port TWRP , hopefully something will work main thing is configuring fstab right partitions
Click to expand...
Click to collapse
That's great new. Good Luck ;-)
alp47470 said:
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
Click to expand...
Click to collapse
Hey can you share the link to download the firmware please
Insomniac05 said:
Hey can you share the link to download the firmware please
Click to expand...
Click to collapse
samfw site put exact name then select country
AddictedA1 said:
samfw site put exact name then select country
Click to expand...
Click to collapse
thanks man i'll see if i can get it to boot back with the flash
alp47470 said:
Well. I faced the same problem. After hours of hit and trail i finally managed to atleast boot back to my previous state i.e Yogi Ji's pic
Solution : I just relocked my bootloader via Download Mode and Flashed latest Firmware ( September Build ) with ODIN Tool. Untill some new development i.e custom ROMs for this device comes i think we are stuck with this lol
Click to expand...
Click to collapse
didn't work for me unfortunately
still shows the same can't create work profile
o
Insomniac05 said:
didn't work for me unfortunately
still shows the same can't create work profile
Click to expand...
Click to collapse
of course it will not work cause knox app is inside stock samsung os it will connect to internet and get to know
Im trying Magisk method it will work 80% confident by patching os file. will update soon.... building twrp mehod is not working is on hold.
AddictedA1 said:
o
of course it will not work cause knox app in inste stock samsung os it will connect to internet and get to know
Click to expand...
Click to collapse
Yeah I know Knox is a part of the os the dude did say his worked so I gave it a go
AddictedA1 said:
Im trying Magisk method it will work 80% confident by patching os file. will update soon.... building twrp mehod is not working is on hold.
Click to expand...
Click to collapse
U mean patching the ap file??
Insomniac05 said:
U mean patching the ap file??
Click to expand...
Click to collapse
yeh
AddictedA1 said:
yeh
Click to expand...
Click to collapse
Tried doing it that's what tripped knox for me unfortunately
I have tried flashing after patching the AP file with magisk and it still didn't work.
It's knox which is the issue. It'll only work If someone can remove knox successfully and please update here if you do so. Thanks
AddictedA1 said:
o
of course it will not work cause knox app is inside stock samsung os it will connect to internet and get to know
Click to expand...
Click to collapse
Insomniac05 said:
Hey can you share the link to download the firmware please
Click to expand...
Click to collapse
The Knox app only stop booting if it detects that bootloader was unlocked or somtheing of similar nature. You can go back to your old state by relocking and flashing stock fw.
i made a quick guide, hope it helps
FIX - "Can't create work profile because policy prevents custom OS"
Samsung Galaxy Tab A7 Lite was distributed by our state government for promoting technology in the state. (JUST ELECTION THINGS) Anyways, the Tabs are coming with Samsung Knox security which cannot be uninstalled, disabled, debloated with adb...
forum.xda-developers.com
Somebody get help or asked some experience in XDA to make a TWRP port for this device or else forget privacy in this.
LADIES AND GENTLEMEN I HAVE SUCCESSFULLY REMOVED KNOX FROM SAMSUNG OS AND WITH NEW WALLAPER LOOKS HEAVEN )))))