Related
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
mazi_v said:
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
Click to expand...
Click to collapse
i have the same problem as u !!
i have huawei u8950-1 . i used an offline unlock bootloader , it worked and i rooted my device but the problem is bluetooth doesnt work anymore !!
i surfed all the net and there is no official firmware for u8950-1 !!
so we have no other option , we have to wait till releasing official firmware via huawei website .
HELP ME
plaese
rom official huawei g 600 u8950-1
costum rom huwei g600 u8950-1
ronaadinho said:
i have the same problem as u !!
i have huawei u8950-1 . i used an offline unlock bootloader , it worked and i rooted my device but the problem is bluetooth doesnt work anymore !!
i surfed all the net and there is no official firmware for u8950-1 !!
so we have no other option , we have to wait till releasing official firmware via huawei website .
Click to expand...
Click to collapse
hey buddies !!
i have found these 3 firmware for u8950-1 but i cant put their links here because my posts are below 10 .
i have downloaded all 3 ones but i havent tried them yet . i think all 3 are official firmwares , the first one is used in Czech Republic and i have found 2 guys from Czech Republic in xda who have this verion on their 8950-1 and its working all fine . have u tried them ????
versions are :
1. V100R001C326B953
2. V100R001C00B941
3. V100R001C00B942
they have been uploaded on a uploadcenter ( ulozto) from Czech Republic u can google u8950-1 ulozto and find them easily .
i got my phone to huawei service center and they flash it to ver 957 and its all ok now.
if you tried one of this rom let us know.
but rooting problem still last and suffering:crying:
roms link
h t t p:/ /w ww.ulozto.net/hledej?q=u8950-1
mazi_v said:
i got my phone to huawei service center and they flash it to ver 957 and its all ok now.
if you tried one of this rom let us know.
but rooting problem still last and suffering:crying:
Click to expand...
Click to collapse
Hey buddy , thank u for helping . Could u let us know , did u pay money for ur phone to be flashed or not ? Because as u know rooting phone voids its guarantee . By the way , i havent tried them because after that i need unlock code and huawei hasnt sent me any code yet . So i prefer my phone to be rooted instead of having my bluetooth working and unfortunately there is no solution for rooting u8950-1 yet . Im wondering why they dont email us any unlock code for u8950-1 but they have sent to people unlock code for u8950d . Did u ask huawei service about unlock code ?
U8950-1
hi xda
please official rom huwaei G600 U8950-1
thank you very much
HELP ME
my phone U8950-1V100R001C00B948
nothing rom by phone please official rom my phone
ronaadinho said:
Hey buddy , thank u for helping . Could u let us know , did u pay money for ur phone to be flashed or not ? Because as u know rooting phone voids its guarantee . By the way , i haven't tried them because after that i need unlock code and huawei hasn't sent me any code yet . So i prefer my phone to be rooted instead of having my Bluetooth working and unfortunately there is no solution for rooting u8950-1 yet . I'm wondering why they don't email us any unlock code for u8950-1 but they have sent to people unlock code for u8950d . Did u ask huawei service about unlock code ?
Click to expand...
Click to collapse
i didn't paid anything.i think they were so kind with me and didn't avoid my guaranty.
you can unroot your device then take it to service center.
or flash one of that ROM on my previous post.
ronaadinho said:
hey buddies !!
i have found these 3 firmware for u8950-1 but i cant put their links here because my posts are below 10 .
i have downloaded all 3 ones but i havent tried them yet . i think all 3 are official firmwares , the first one is used in Czech Republic and i have found 2 guys from Czech Republic in xda who have this verion on their 8950-1 and its working all fine . have u tried them ????
versions are :
1. V100R001C326B953
2. V100R001C00B941
3. V100R001C00B942
they have been uploaded on a uploadcenter ( ulozto) from Czech Republic u can google u8950-1 ulozto and find them easily .
Click to expand...
Click to collapse
Hi everybody,
I try also to find an original firware for my u-8950-1, I downloaded the V100R001C326B953 firmware but it doesn't install on my phone (i have U8950-1V100R001WEC00B942).
The 3 firware versions are only work with Czech phones i think.
Anyone have link to other official firware? I try google and of course huawei website but couldn't find anything.
Thanks for your help guys.
jimibxl said:
The 3 firware versions are only work with Czech phones i think.
Anyone have link to other official firware? I try google and of course huawei website but couldn't find anything.
Thanks for your help guys.
Click to expand...
Click to collapse
http://consumer.huawei.com/en/mobile-phones/smart-phones/support/downloads/u8950-en.htm
Update failed
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
jag123123 said:
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
Click to expand...
Click to collapse
I received the problem too, but tried it on my U8950N-51
I will give this firmware a go:
http://www.mediafire.com/download/2jxf7v81ra60pw7/U8950-1-V100R001C326B953-CZ.rar
Otherwise, I might try these ones:
http://www.ulozto.net/hledej?q=u8950-1
Is u'r Problem fixed..?
jag123123 said:
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
Click to expand...
Click to collapse
hey I'm also in the same situation Step 2/2 "Update failed".. Please tell how to Fix this..
mailtomeesubash said:
hey I'm also in the same situation Step 2/2 "Update failed".. Please tell how to Fix this..
Click to expand...
Click to collapse
Hi. i have a serious problem on my huawei u8950n-51. I need the original firmware. thanks
Please
mazi_v said:
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
Click to expand...
Click to collapse
Please can u till me which program had u used to unlock boot loader of huawie u8950-1 cz i tried dc unlocker and it has a problem.. it always says:
unknown error (231)
DBAadapter reserved Interface driver ver. 2.0.6.601 required, please download and install
and i downloaded that driver but the problem still exists>>
so please kindely tell me where is that file u used, or is there any program for that other than dc unlocker
hi:
mine is "u8950-1V100R1C00B963"
ANY firmwares to suggest?
8950-1 State 9008
Hello Hi Huawei 8950-1 brick when connected to a computer is defined as port 9008, how can it be restored prompt please?
You have to find UPDATE.APP file and try to reset by dload (you can find some instructions on internet)
9008 Huawei u8950-1
I was told that I can recover through the QPST That in the beginning it is necessary to restore the loader and it should go to mode 9006 and then restore the flash but it does not want to be stitched in the program QPST .And Dload is the program such? First time I hear
Hey guys;
First of all sorry for my english I have got huawei honor (u8860) but i have got big problem.My phone build number is v112 so i cant load any rom to my phone last day i change recovery.img but my phone cant start.it says image signification fail.I need 4.0.3 turkcell rom or other solution for this. Anyone can help me ?
Peocawe said:
Hey guys;
First of all sorry for my english I have got huawei honor (u8860) but i have got big problem.My phone build number is v112 so i cant load any rom to my phone last day i change recovery.img but my phone cant start.it says image signification fail.I need 4.0.3 turkcell rom or other solution for this. Anyone can help me ?
Click to expand...
Click to collapse
Did retry to load correct recovery.img ..chk this if it helps
http://forum.xda-developers.com/showpost.php?p=44933473&postcount=3
Hello
I own a ZTE V967S, my first Android Mobile. Now I have some trouble with the phone, by mistake I deleted the file: com. android.phone. Now the phone doesn`t find my sim-card and so I have no adressbook and can`t dial any number.
I have tryed a lot of different Android Versions (all MaxFlavour and MIUI) but the problem is still the same, the phone can`t find my Simcard..........
Can anybody help me?
I`m writing from Germany so excuse my bad english
Flash A New Firmware
You got to flash a new firmware for your phone. Google for it & flash it..
Hi,
I have found no firmware download for my phone.
How big would the file because its about?
100-250 mB
Leonhardt666 said:
Hi,
I have found no firmware download for my phone.
How big would the file because its about?
Click to expand...
Click to collapse
Size may vary frm 100 mb to 250 mb..
Hi
Can someone help me?
I still have the same problem as in the beginning.
And i don`t find a firmware at the moment i have installed
the new max smart v3.
Everything works up but i can`t dial any number and the phone doesn`t find my sim-card!
Sorry for my bad English
Thanks for Help.
Hello,
I offer 25 Euro by Paypal
for who is able to help me that I can again make calls with my phone.
A guide would be helpful
The problem is described in this thread.
Thank you
Hi,
can someone send me a working Backup from a Zte V967s or 987s
for SpFlashtools or MtkDroidTools?
Thanks.
You still need help with your phone?
hy! i am new to xda so sorry if im posting in a wrong thread.on the official site of huawei i foud a package with emui 3.0 for huawei g535 (gova or ee).the file name is g535 kernel.tar.gz and i dont know how to apply this update.can anyone help me? sorry for my bad eng.
I also just found this.
I'm not 100% convinced that it's emui 3, but it's got me interested.
Not sure if it's possible to update the ROM using a tar.gz file? Can you apply it as a zip in the recovery?
I didn't try to flash.i have stock recovery and i have some doubts about this file.i research over the web and i think the file should be like you say a zis file.for pur devices a update.zis file.i tried to copy this file in dload folder and make manual update and file is not recocnised by my phone.i Hope to come some un update oficial for our devices.in my opinion its a good device to be stuck in jb.
Orange Gova Huawei G535
anyone who want stock firmware for Huawei G535 can contact me
please help me
bgdion said:
anyone who want stock firmware for Huawei G535 can contact me
Click to expand...
Click to collapse
Hello,
i am new in android problems, soft. and stuff.
Please help me out, i have a Huawei G535-L11, with customization from Orange Romania, his name Orange Gova, with Android version 4.3, Band version 100131, Software G535-L11V100R001C109B120. i whant to remove that version of software and put a custom or stock ROM, and unlock my network for all sim networks. I have allready unlock my bootloader with a password provided from huawei official site. What i have to do next and from where i can take a ROM and how to install him.
Thank you verry much and sorry for my english.
What is the code
Remus77 said:
Hello,
i am new in android problems, soft. and stuff.
Please help me out, i have a Huawei G535-L11, with customization from Orange Romania, his name Orange Gova, with Android version 4.3, Band version 100131, Software G535-L11V100R001C109B120. i whant to remove that version of software and put a custom or stock ROM, and unlock my network for all sim networks. I have allready unlock my bootloader with a password provided from huawei official site. What i have to do next and from where i can take a ROM and how to install him.
Thank you verry much and sorry for my english.
Click to expand...
Click to collapse
What is the code for unlock the bootloader of your phone?
I am romanian,sorry for my English.
Well, since P7, G6 4G and G535 are the same device (check here: https://www.gsmarena.com/compare.php3?idPhone1=6678&idPhone2=6168&idPhone3=6332), it shoud be possible to upgrade all to Lollipop...
Hi All,
I'm sorry to bother you all, but I really need you help. I live in Morocco and I bought a new Oppo R17 Pro from Aliexpress, I thought it was a global version, but I once I got my hands on it, I realised that the model is PBDM00 which is a Chineese model according to google and the tons of bloatware installed on the phone . I want to install the global firmware CPH1879 with international rom.
I attached 2 images showing all the details you might need to give a hand.
Could you please inform me on how to do that? I really need your help guys. Thank you so much
You're probably better off on the Chinese version. The latest Android 10 update for R17 Pro just came out a few days ago. It is only available for PBDM00 and PBDT00 variants (both Chinese). I'm on CPH1877 and don't have the Android 10 update yet.
@sghir ziane
The mentioned tons of bloatware installed aren't part of device's ROM: they are either installed as user apps or system apps / system-privileged apps and can all get deinstalled / frozen by you.
sghir ziane said:
Hi All,
I'm sorry to bother you all, but I really need you help. I live in Morocco and I bought a new Oppo R17 Pro from Aliexpress, I thought it was a global version, but I once I got my hands on it, I realised that the model is PBDM00 which is a Chineese model according to google and the tons of bloatware installed on the phone . I want to install the global firmware CPH1879 with international rom.
I attached 2 images showing all the details you might need to give a hand.
Could you please inform me on how to do that? I really need your help guys. Thank you so much
Click to expand...
Click to collapse
hey bro now can unlock the bootloader
need to make oppo acount
and donwload the appk
https://bbs.coloros.net/graphic?id=1498611
https://www.getdroidtips.com/unlock-bootloader-oppo-r17-pro/
i think when you donde it you can install any firmware
i got my oppo r17(pbem00) BL unlocked but i could not do anything after that since we don't have the suitable twrp and you will get stuck in the username and password of the msm download tools in the stock rom files.