Related
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
cybrkada said:
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
Click to expand...
Click to collapse
How are you installing it ???
Via flash tool??
And nope your phone won't brick
I disconnected the cord. Turned on the phone and noticed that USB Debugging is ticked/checked. So I repeated the process but I am still getting..
< waiting for device >
What should I do?
soulhackereborn said:
How are you installing it ???
Via flash tool??
And nope your phone won't brick
Click to expand...
Click to collapse
Yes, via Flastool. Yeah my phone did not get bricked! :good:
cybrkada said:
Yes, via Flastool. Yeah my phone did not get bricked! :good:
Click to expand...
Click to collapse
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
soulhackereborn said:
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
Click to expand...
Click to collapse
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
cybrkada said:
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
Click to expand...
Click to collapse
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
soulhackereborn said:
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
Click to expand...
Click to collapse
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
cybrkada said:
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
Click to expand...
Click to collapse
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
soulhackereborn said:
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Click to expand...
Click to collapse
I dont see PM here, i think I am still restricted.
see if the link helps, i removed w w w
android.gs/install-clockworkmod-recovery-sony-xperia-s
i'm rebooting them after this.. thanks
LiveSquare said:
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
Click to expand...
Click to collapse
Which drivers? I have already downloaded SDK and I believe the S1 driver is installed yesterday when i unlock the bootloader.
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
cybrkada said:
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
Click to expand...
Click to collapse
Dude as far as I know there is no need to check/ tick USB debugging for fastboot... It's just for flashtool..
Try re -installing the drivers again manually or let windows search over internet...
Finally, i made it! thanks to both of you!
fastboot.exe seems to be corrupted!
Problem solved!
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
cybrkada said:
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
Click to expand...
Click to collapse
Yes ur rooted!!
Thanks!
I'm currently downloading Cyanogenmod ver 9.1. Hopefully it works! Thank you so much buddy! You have been very helpful! If I get problems on flashing CM9.1, i'll contact you , hehe
One of the reminders on isntalling CM9 is:
Make sure that your Xperia S is already running a rooted firmware, and that it has the ClockworkMod Recovery properly installed.
How do I know I have a rooted firmware? Do I still need to flash FTF file?
By the way, I am getting a boot loop from CWM recovery, I cant go to the homescreen, no option to turn off! It only reboots the CWM.
(Still downloading CM9 as of the moment)
hi folks,
tomorow should be getting my hands on the Ulephone power 2.
its the 5.5 screen 4gb ram 64gb rom.
all looks good until i have seen that the normal duel sim is one is hybrid for sdcard which is the norm right,
ant
but............
usually its sim 1 is for 4g cards and the hybrid is for 2g/3g/sdcard. yeah?
well the power 2 looks like its sim slot 1 is a 2g/3g slot and the hybrid is 4g or sdcard??????????
so will have to choose 4g or sdcard??? that cant be right?
I don't try this device with sim.
I know you can use the older power (1) have a sim 4g and SD card
So i believe the power 2 have the same method.
My first steps: How to root this device? i don't find a twrp.
I try to root with kingroot kingoroot, no results
Please?
The power 2 is the same as the power wrt the sim/memory card tray; both sim slots support 4g, but only one at a time. So if you put two 4g sims in, only one of them will have 4g (you choose which one), with a sim and a memory card the 4g should default to the inserted sim, but you might have to check this in settings.
Received my power 2 a couple of weeks ago after having it on pre-order for a month and I love it (sold the original power towards the cost).
I haven't tried rooting it yet, but was thinking of trying to flash twrp for the original power and seeing if that works. The great thing about these phones is that they're very hard to brick as you can always flash them as long as they still switch on.
Slàinte
mmidders
Hello my friends. I just bought the ulefone power 2 and i try to root it. Can anyone help me pls ???
mmidders said:
The power 2 is the same as the power wrt the sim/memory card tray; both sim slots support 4g, but only one at a time. So if you put two 4g sims in, only one of them will have 4g (you choose which one), with a sim and a memory card the 4g should default to the inserted sim, but you might have to check this in settings.
Received my power 2 a couple of weeks ago after having it on pre-order for a month and I love it (sold the original power towards the cost).
I haven't tried rooting it yet, but was thinking of trying to flash twrp for the original power and seeing if that works. The great thing about these phones is that they're very hard to brick as you can always flash them as long as they still switch on.
Slàinte
mmidders
Click to expand...
Click to collapse
I'm sure it's not working the twrp from the power (1).
If you have troubles with bootloops you can flash again the facatory rom and SP flash tools.
Press the power volume + and - and SP flash tools gonna flash.
The only way is to made a twrp from the k6000 http://fvknl.pro/k6000-plus-root-guide/
I don't know how, that device is almost the same...
There has been 2 ulefone Updates since launch
Android 8.0 is scheduled for end of the year.
Updates are fine, who can create a TWRP? So we can finally root the device
geheimke said:
Updates are fine, who can create a TWRP? So we can finally root the device
Click to expand...
Click to collapse
up
TWRP please!
Not so easy to do it. It will take very long time to port or build twrp
It sucks that power 2 still doesn't have root or twrp. I refuse to touch unrooted phones. I just received it as gift. I will keep it in a drawer and check next month or so.
I find that it lacks optimisation, kinda laggy in 3D/games ..
On Antutu, scores is 44000. I tested a galaxy S5 of a friend, it was 72000. For a phone that is several years older than Power 2.
I understand that it comes not with high end cpu/gpu but still..
I will copy my post from needrom website.
I have successfully rooted my two Power 2 phones. I had to port the TWRP recovery from Oukitel k6000 plus using Carliv Image Kitchen and following some online tutorials.
The only issue is, TWRP is semi functional, that is, touch doesn't work. I had to connect a mouse to my phone via OTG usb port and using some dongle to make USB smaller to fit the port. Also it comes with Russian language as default, but can be changed to English or any other as the original TWRP from Oukitel k6000+ (3rd button from second column, then click on Globe tab at the top right then choose English and the only button at the bottom to accept the change).
I am trying to fix this with no luck so far. But at least I am rooted and I was able to flash "SR1-SuperSU-v2.82-SR1-20170608224931.zip" which is the latest as of writing this. SuperSu functions properly and I am able to use AdAway.
If anyone is interested in the recovery image, I will post it. I flashed it using fastboot though after unlocking the bootloader using "fastboot oem unlock"
Click to expand...
Click to collapse
Rebel_X said:
I will copy my post from needrom website.
Click to expand...
Click to collapse
I would very much like to give this a go with my ulefone power 2!
Here you go, TWRP for Ulefone Power 2
What you need to do before you start flashing:
0) You need to have ADB installed on your computer, if you have Windows, the easiest way is by using 15 Seconds ADB Installer v1.4.3.
1) Your bootloader must be unlocked, otherwise flashing recovery will fail using fastboot command. PLEASE NOTE: When unlocking the bootloader, your phone will do a factory reset automatically, so backup all your important files beforehand.
To unlock the bootloader:
a) Go to Settings -> About Phone -> Build number (tap on it 7 times to unlock Developer Options) -> Tap on back to Settings menu then Developer Options.
b) Now move the slider for "OEM Unlocking" to enable it, say yes to the warning message.
c) Enable "USB Debugging"
d) Connect your phone to your computer via USB cable, say Yes for the dialog on your phone to trust your computer for debugging using USB.
e) Run command prompt and type
Code:
adb reboot bootloader
Then press enter
f) Once in bootloader, type
Code:
fastboot oem unlock
Then press Volume UP on your phone to allow OEM Unlock. It shouldn't take long, just few seconds and a message will appear on command prompt saying success or OK.
g) Type
Code:
fastboot reboot
To reboot your phone, it might reboot twice, it will do a factory reset and you will have to "Enable Developer Options and USB Debugging" again. As a side note, you will also notice that OEM Unlocking is grayed out. It will remain like that unless you do "fastboot oem lock" or erase the entire phone (might erase imei, but can be restored using SN Writer Tool) and/or flash bootloader using SP_FLASH_TOOL, but I digress.
2) Before you flash TWRP recovery, you must have SuperSu zip file on your phone beforehand, otherwise, your phone will not boot to Android. It has to do with something about the original TWRP for Oukitel k6000+, since the author of that TWRP port said so in the instructions about how to flash the recovery.
So download SR1-SuperSU-v2.82-SR1-20170608224931.zip from this link or the original SuperSu thread on XDA, and copy the file into your phone, say inside the Download folder in the internal memory of your phone.
3) Open command prompt again if it is not already open, type
Code:
adb reboot bootloader
4) Once in bootloader, type
Code:
fastboot flash recovery C:\TWRP-recovery-20170618-1340.img
Note: You replace the path for the TWRP recovery to where you have the file, to make it easier, just put it in the root of C drive.
Also, if you don't already know, while in command prompt, you can type C:\TWRP then press TAB to auto-complete the file name for you, so you don't have to type lengthy file names. Keep pressing TAB to cycle between similar occurrences, that is, if you have more than one file that their names start with TWRP
5) Press power button until phone shuts down. Then press Volume UP + Power and keep holding until you see super tiny text with 3 options to cycle between. Release your fingers from Volume Up + Power, then cycle between the options using Volume Up only, choose "RECOVERY" which is the first in the menu, then press Volume DOWN to select.
6) Wait a few seconds, you will be inside TWRP, connect your phone with a mouse since touch doesn't work here. Once you do, you will see a mouse pointer appear. I used a wireless mouse with bluetooth dongle, with an adapter to change USB port size.
7) Slide the slider to the right, to enable modifications to System partition. Don't press anything else, unless you know Russian, I don't .
8) To change the language to English or your own language, click on the third button of the second column. Then click on the Globe tab on the top right corner, change language, then press the only button at the bottom to accept. Language of the UI is changed.
9) Click "Install", browse for the SuperSu zip file you have downloaded to your phone, for example inside the Download folder. And then select it.
10) Slide to the right to flash SuperSu.
11) From the TWRP menus, you can reboot your phone.
12) Enjoy your rooted Power 2 phone. :good:
---------- Post added at 04:47 AM ---------- Previous post was at 04:47 AM ----------
alpsayin said:
I would very much like to give this a go with my ulefone power 2!
Click to expand...
Click to collapse
Check the post above :good:
hello , i got a ulefone power 2 but unfortunately its not powering on. As i am from india and returning or replacing is costly and timetaking process, i need you guys to help me. I tried to flash it with software available on the website but stuck. I need some checksum.ini file which is not there in the firmware file provided. So anyone please help me. the phone doesnt even show the ulefone logo. i can just see the charging percentage when the charger is connected, then keeping it connected i tried to turn on but didnt work. keeping the charger connected ,after some time the display goes off and no mater how long you press the power button , the display doesnt show up. I can only see the notification bulb.
Soft bricked :laugh: trying to recover the phone, official ulefone guide is useless. Getting some error about a missing checksum.ini file. Will keep this thread updated
All went well until step 9, where I realised factory reset deleted the supersu zip. So I tried to reboot into system to download it again. It never booted. Doesnt even go into adb mode.
Fastboot mode and TWRP intact (TWRP needs a mouse). I was able to flash original recovery via fastboot, getting "cannot load system.img" error when I try to flash system (it appears I might need to update my adb/fastboot version).
UPDATE: was able to flash the stock rom. And tried to follow the guide again, and faced the same symptoms. If i have working TWRP, then the system doesnt boot. And vice-versa. Will keep updated, i'm a persistent mf
Rebel_X said:
Here you go, TWRP for Ulefone Power 2
What you need to do before you start flashing:
0) You need to have ADB installed on your computer, if you have Windows, the easiest way is by using 15 Seconds ADB Installer v1.4.3.
1) Your bootloader must be unlocked, otherwise flashing recovery will fail using fastboot command. PLEASE NOTE: When unlocking the bootloader, your phone will do a factory reset automatically, so backup all your important files beforehand.
To unlock the bootloader:
a) Go to Settings -> About Phone -> Build number (tap on it 7 times to unlock Developer Options) -> Tap on back to Settings menu then Developer Options.
b) Now move the slider for "OEM Unlocking" to enable it, say yes to the warning message.
c) Enable "USB Debugging"
d) Connect your phone to your computer via USB cable, say Yes for the dialog on your phone to trust your computer for debugging using USB.
e) Run command prompt and type
Code:
adb reboot bootloader
Then press enter
f) Once in bootloader, type
Code:
fastboot oem unlock
Then press Volume UP on your phone to allow OEM Unlock. It shouldn't take long, just few seconds and a message will appear on command prompt saying success or OK.
g) Type
Code:
fastboot reboot
To reboot your phone, it might reboot twice, it will do a factory reset and you will have to "Enable Developer Options and USB Debugging" again. As a side note, you will also notice that OEM Unlocking is grayed out. It will remain like that unless you do "fastboot oem lock" or erase the entire phone (might erase imei, but can be restored using SN Writer Tool) and/or flash bootloader using SP_FLASH_TOOL, but I digress.
2) Before you flash TWRP recovery, you must have SuperSu zip file on your phone beforehand, otherwise, your phone will not boot to Android. It has to do with something about the original TWRP for Oukitel k6000+, since the author of that TWRP port said so in the instructions about how to flash the recovery.
So download SR1-SuperSU-v2.82-SR1-20170608224931.zip from this link or the original SuperSu thread on XDA, and copy the file into your phone, say inside the Download folder in the internal memory of your phone.
3) Open command prompt again if it is not already open, type
Code:
adb reboot bootloader
4) Once in bootloader, type
Code:
fastboot flash recovery C:\TWRP-recovery-20170618-1340.img
Note: You replace the path for the TWRP recovery to where you have the file, to make it easier, just put it in the root of C drive.
Also, if you don't already know, while in command prompt, you can type C:\TWRP then press TAB to auto-complete the file name for you, so you don't have to type lengthy file names. Keep pressing TAB to cycle between similar occurrences, that is, if you have more than one file that their names start with TWRP
5) Press power button until phone shuts down. Then press Volume UP + Power and keep holding until you see super tiny text with 3 options to cycle between. Release your fingers from Volume Up + Power, then cycle between the options using Volume Up only, choose "RECOVERY" which is the first in the menu, then press Volume DOWN to select.
6) Wait a few seconds, you will be inside TWRP, connect your phone with a mouse since touch doesn't work here. Once you do, you will see a mouse pointer appear. I used a wireless mouse with bluetooth dongle, with an adapter to change USB port size.
7) Slide the slider to the right, to enable modifications to System partition. Don't press anything else, unless you know Russian, I don't .
8) To change the language to English or your own language, click on the third button of the second column. Then click on the Globe tab on the top right corner, change language, then press the only button at the bottom to accept. Language of the UI is changed.
9) Click "Install", browse for the SuperSu zip file you have downloaded to your phone, for example inside the Download folder. And then select it.
10) Slide to the right to flash SuperSu.
11) From the TWRP menus, you can reboot your phone.
12) Enjoy your rooted Power 2 phone. :good:
---------- Post added at 04:47 AM ---------- Previous post was at 04:47 AM ----------
Check the post above :good:
Click to expand...
Click to collapse
mbs.yaswanth said:
hello , i got a ulefone power 2 but unfortunately its not powering on. As i am from india and returning or replacing is costly and timetaking process, i need you guys to help me. I tried to flash it with software available on the website but stuck. I need some checksum.ini file which is not there in the firmware file provided. So anyone please help me. the phone doesnt even show the ulefone logo. i can just see the charging percentage when the charger is connected, then keeping it connected i tried to turn on but didnt work. keeping the charger connected ,after some time the display goes off and no mater how long you press the power button , the display doesnt show up. I can only see the notification bulb.
Click to expand...
Click to collapse
Yeah, I had the same issue with the software that comes from Ulefone, it was asking for Checksum Generator that I have to download separately, it was like 150kb stand alone executable, you put it in the same folder of your stock ROM and wait forever for it to build the Checksum, which unfortunately didn't work since it complains about multiple RECOVRY images. So scratch that.
What you need to do, is as I did, download SP FLASH TOOL, it works great, no shinanigans or bullsh!t. It flashed the stock ROM in less than 2 minutes (around 1:30 seconds, to be exact) and revived my phone. There are plenty of youtube tutorials on how to use it. It is easy, just load the scatter file, for the other file, you can use the same all in one mtk file that comes with SP FLash Tool (I did this) or use the one from your STOCK ROM.
I hope that helps :good:
---------- Post added at 02:33 PM ---------- Previous post was at 02:27 PM ----------
alpsayin said:
Soft bricked :laugh: trying to recover the phone, official ulefone guide is useless. Getting some error about a missing checksum.ini file. Will keep this thread updated
All went well until step 9, where I realised factory reset deleted the supersu zip. So I tried to reboot into system to download it again. It never booted. Doesnt even go into adb mode.
Fastboot mode and TWRP intact (TWRP needs a mouse). I was able to flash original recovery via fastboot, getting "cannot load system.img" error when I try to flash system (it appears I might need to update my adb/fastboot version).
UPDATE: was able to flash the stock rom. And tried to follow the guide again, and faced the same symptoms. If i have working TWRP, then the system doesnt boot. And vice-versa. Will keep updated, i'm a persistent mf
Click to expand...
Click to collapse
All I can think of, you did something wrong. Initially, while I was trying to port TWRP, I had the same issue, I was trying to save some steps by flashing the recovery after I unlocked the bootloader without rebooting, the result was TWRP was not able to see any partitions.
Flash Stock-ROM and redo the steps. If you flash the preloader you might have to OEM Unlock your phone again.
I mentioned that if you "do not flash SuperSu, the system will NOT boot to Android". Also mentioned that after you unlock the bootloader, you have to RE-ENABLE USB Debugging, and while you are at it, check to see if your bootloader is unlocked inside Developer Options.
Edit: BTW, try not to unlock the bootloader if it is already unlocked. If it is unlocked, then skip the steps for unlocking the bootloader. It might cause an issue.
These are the steps I used to flash TWRP and I was able to flash SuperSu, all rooted apps are working fine, AdAway, Lucky Patcher...etc!
This:
Rebel_X said:
Here you go, TWRP for Ulefone Power 2
2) Before you flash TWRP recovery, you must have SuperSu zip file on your phone beforehand, otherwise, your phone will not boot to Android. It has to do with something about the original TWRP for Oukitel k6000+, since the author of that TWRP port said so in the instructions about how to flash the recovery.
Click to expand...
Click to collapse
And this combined:
Rebel_X said:
Here you go, TWRP for Ulefone Power 2
9) Click "Install", browse for the SuperSu zip file you have downloaded to your phone, for example inside the Download folder. And then select it.
Click to expand...
Click to collapse
Apparently if you dont flash the supersu first time you go into TWRP then it gets messy. Got the root working now. Thank you for the help and of course for the TWRP build!
Also if anyone's wondering it's possible to restore the system via fastboot. Extract the rom zip (can be downloaded from http:/ulefone.com/download/power2.html ) and flash boot, recovery and system;
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
link for sp flash tool u used.
Rebel_X said:
Yeah, I had the same issue with the software that comes from Ulefone, it was asking for Checksum Generator that I have to download separately, it was like 150kb stand alone executable, you put it in the same folder of your stock ROM and wait forever for it to build the Checksum, which unfortunately didn't work since it complains about multiple RECOVRY images. So scratch that.
What you need to do, is as I did, download SP FLASH TOOL, it works great, no shinanigans or bullsh!t. It flashed the stock ROM in less than 2 minutes (around 1:30 seconds, to be exact) and revived my phone. There are plenty of youtube tutorials on how to use it. It is easy, just load the scatter file, for the other file, you can use the same all in one mtk file that comes with SP FLash Tool (I did this) or use the one from your STOCK ROM.
I hope that helps :good:
---------- Post added at 02:33 PM ---------- Previous post was at 02:27 PM ----------
All I can think of, you did something wrong. Initially, while I was trying to port TWRP, I had the same issue, I was trying to save some steps by flashing the recovery after I unlocked the bootloader without rebooting, the result was TWRP was not able to see any partitions.
Flash Stock-ROM and redo the steps. If you flash the preloader you might have to OEM Unlock your phone again.
I mentioned that if you "do not flash SuperSu, the system will NOT boot to Android". Also mentioned that after you unlock the bootloader, you have to RE-ENABLE USB Debugging, and while you are at it, check to see if your bootloader is unlocked inside Developer Options.
Edit: BTW, try not to unlock the bootloader if it is already unlocked. If it is unlocked, then skip the steps for unlocking the bootloader. It might cause an issue.
These are the steps I used to flash TWRP and I was able to flash SuperSu, all rooted apps are working fine, AdAway, Lucky Patcher...etc!
Click to expand...
Click to collapse
ok what should i select there? formal all+download or download only or firmware upgarade???
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
Solutions:
1. Boot into recovery (Power + VolUp) and restore last backup (I really do hope you have a backup). It should be enough to restore just boot image. Mine ended in eRecovery few days ago after messing with Magisk and I've successfully recovered my device from there
2. Download original firmware, extract it, boot into fastboot (obv., try fixing it first, but you've flashed TWRP so it must work for other stuff, too) and just reflash original boot image
3. Download original firmware, extract it, boot into fastboot and reflash original recovery, then try eRecovery (this will probably wipe all your data, though)
There are tons of manuals how to extract Huawei/Honor firmware images (even a nice little program to do it for you), so I'd suggest searching around for that SW instead of asking how.
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
what recovery do you have now?? can you access twrp? or you are left with emui recovery??
if you have emui recovery, just perform a dload flash
Looks like he solved it.
adriansticoid said:
Looks like he solved it.
Click to expand...
Click to collapse
We need his solution , the one he tried
gopinaidu77 said:
We need his solution , the one he tried
Click to expand...
Click to collapse
Let's wait for his post.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Let's wait for his post.
Click to expand...
Click to collapse
Its been long he replied. Omg ,what is going ?
Stop. Spamming. The. Thread. For. Points.
IMPORTANT: It appearance that Huawei is no longer going to provide bootloader unlocking services for their devices. Because of this, this guide is of no use unless you can find a way to get a code or you just held onto the code.
Hello, this is a guide for unlocking the bootloader and rooting the Huawei Ascend XT. I am writing this because the current guide is not very well written and does not contain bootloader unlock instructions. This will be split into two parts: Part 1, unlocking the bootloader, and Part 2, rooting the phone.
PLEASE NOTE THAT FOLLOWING THESE INSTRUCTIONS WILL WIPE YOUR DEVICE. I AM NOT RESPONSIBLE FOR AND DAMAGE DONE TO YOUR PHONE!
THINGS YOU WILL NEED:
1. A Huawei Ascend XT with at least 60% of battery left
2. A computer with adb drivers, fastboot drivers, and the Huawei USB drivers
3. A Micro-SD card for your backups (THIS IS VERY IMPORTANT! PLEASE MAKE BACKUPS!)
4. TWRP for this phone. This can be found here: https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933 (credits to enigma2446)
5. The ZIP containing SuperSU. This can be found here: https://forum.xda-developers.com/android/general/huawei-ascend-xt-h1611-t3507933
6. The SDK Platform Tools. These can be found on the android studio website.
PART 1: UNLOCKING THE BOOTLOADER1. Geting the Bootloader Unlock Code: You need to get your bootloader unlock code. You can get this by going to https://emui.huawei.com/en/plugin.php?id=unlock
(EDIT: It appears that this website is down. I have read that if you PM Huawei on Twitter or call them and provide all the details of your phone, they will give you a code. I have not tested this method, bit people have said it worked with the mate 10.) and signing into your Huawei ID. If you dont have one, create one. Then, follow the instructions given to you by Huawei to get the code.
2. Enabling the Enable OEM Unlock Option: To enable this option, you must enable developer options. To do this, go to Settings>About Phone and tap the Build number until it says "You are now a Developer". back out of About Phone, and go to Developer options. turn on "Enable OEM unlock" and press Enable.
3. Enable USB Debugging: While you are still in Developer options, enable the option 'USB debugging" and press OK.
4. Booting Into the Bootloader: once you have completed the first three steps, you can now boot into the bootloader. Connect your phone to your computer, and open the Platform Tools folder you should have downloaded and extracted. Shift-Right click, and press "Open Command Window Here" or "Open Powershell Window Here", depending on your version of windows. Once it is open, make sure your device is detected by typing "adb devices". If it displays your device, you are good to continue. If not, something is not set up right on your computer or phone. Once you verified that your phone is detected, type "adb reboot bootloader".
5. Unlocking the Bootloader: Once your phone has booted into the bootloader, you can now unlock the bootloader. YOUR PHONE WILL BE WIPED ONCE YOU TYPED THIS COMMAND. You can unlock it by typing "fastboot oem unlock <your bootloader unlock code>". Once it has finished, you can reboot your phone, and just run through the setup fast, because you will still have to wipe it again.
PART 2: ROOTING YOUR PHONE1. Move the TWRP image you downloaded (called
Xtrecovery) to your Platform Tools folder and rename it to "TWRP.img"
2. Insert Your Micro-SD Card
3. Move the SuperSU Zip you downloaded to the SD card
4. Re-Enable USB Debugging: Enable Developer options by going to Settings>About Phone and taping the Build number until it says "You are now a Developer". Back out of About Phone, and go to Developer options, and enable USB debugging, and press OK.
5. Boot Into the Bootloader: Type "adb reboot bootloader" into your open CMD window or Powershell window.
6. Verify That your Phone says that the Bootloader is unlocked
7. Type "fastboot boot TWRP.img"
8. TWRP should boot. Tap "Keep Read Only"
9. You should now be in TWRP. Go to Backup>Select Storage and choose your Micro-SD card and tap OK. Uncheck everything and check "Recovery". Then, Swipe the slider to back up your stock recovery partition.
10. Once it has finished backing up, reboot your phone to the bootloader.
11. Once it is in the bootloader, type "fastboot flash recovery TWRP.img" to flash TWRP as your recovery. (I believe this is the point where your warrenty will be invalidated by Huawei, so be careful.)
12. When it finishes flashing TWRP, reboot your phone to TWRP by holding down the power button and volume up
13. It should boot to TWRP. Tap "Keep Read Only", then go to (YOU ARE ABOUT TO WIPE IT AGAIN)Wipe>Format Data and type yes, and hit the enter button.
14. Once it finishes, go to Backup>Select Storage, select your SD card and hit OK, then check every box to backup all six partitions, and swipe to back them up. (At the end, it may seem to get stuck at 98-99%, DO NOT STOP IT! It is generating an MD5 checksum)
15. When it finishes backing everything up, go back to the home screen of TWRP, then go to Install, navigate to where you stored the SuperSU ZIP, select it, then swipe to flash it.
16. When it finishes flashing the SuperSU ZIP, tap "Clear Cache/Dalvik" and swipe to clear them.
17. Reboot your phone. IT WILL REBOOT MULTIBLE TIMES AND APPEAR TO BE STUCK SOMETIMES, BUT DONT TOUCH IT! This is normal and it will eventually boot like normal.
That's it!
Your phone should now be rooted and have SuperSU installed. Please note that this is a Systemless root, and will be removed if you factory reset your phone.Thanks to divineBliss for creating the original instructions.
What do we do after we get root to install custom ROMS? please advise
nedfred0 said:
What do we do after we get root to install custom ROMS? please advise
Click to expand...
Click to collapse
To install a custom ROM, you need the ROM you want to install, gapps depending on the ROM, and the proper firmware. The firmware you are on can be found under about phone and is the last 4 digets of the build number (in the format of B1xx). Once you are on the proper firmware, have your ROM and other things it may require, (every ROM is different), and a backup (just in case), you can flash the ROM from TWRP. Follow the instructions provided by the creator of the ROM to properly flash it.
Where do you get the USB driver at because I am not seeing it at http://consumer.huawei.com/us/support/phones/ascend-xt/
BTJustice said:
Where do you get the USB driver at because I am not seeing it at
Click to expand...
Click to collapse
The drivers come with HiSuite. Download it and you should be good to go.
randomness725 said:
The drivers come with HiSuite. Download it and you should be good to go.
Click to expand...
Click to collapse
Thanks. I tried that but couldn't get it to go so I downloaded these instead which did the job:
https://www.androidfilehost.com/?fid=817550096634745788
does this work on the new h1711 huawei assend xt2
xaneth201 said:
does this work on the new h1711 huawei assend xt2
Click to expand...
Click to collapse
It will not. The TWRP recovery image is device specific and might brick your device if you flash it to your phone.
bricked 1711
randomness725 said:
It will not. The TWRP recovery image is device specific and might brick your device if you flash it to your phone.
Click to expand...
Click to collapse
Well I did not see that, so yeah, I have bricked it. IT comes up and says it is unlocked, it used to sit there then boot into the system.
So I downloaded the TWRP, tried to reboot to recovery and nothing.
Now, it just gets to the yellow warning screen, then goes black. Just bought this today on a black friday sale for 49.00
But did it for a reason. Now I would like to be able to recover it....
I was able to run adb and fastboot, so know that the drivers work, but it looks like it won't even get there now.
And it won't even go to the recovery, so I guess this phone is a real brick.
Can't seem to get the back cover off to remove the battery either.
You need a copy of the stock H1711 recovery image to use
"fastboot flash recovery H1711-stock-recovery.img" to restore the stock recovery. Until someone creates a working H1711 TWRP, I don't know where you'll find a stock H1711 recovery image file.
scrungydoolittle said:
Well I did not see that, so yeah, I have bricked it. IT comes up and says it is unlocked, it used to sit there then boot into the system.
So I downloaded the TWRP, tried to reboot to recovery and nothing.
Now, it just gets to the yellow warning screen, then goes black. Just bought this today on a black friday sale for 49.00
But did it for a reason. Now I would like to be able to recover it....
I was able to run adb and fastboot, so know that the drivers work, but it looks like it won't even get there now.
And it won't even go to the recovery, so I guess this phone is a real brick.
Can't seem to get the back cover off to remove the battery either.
Click to expand...
Click to collapse
download hisuite, enable oem unlocking and usb debbuginig, you gotta also get tha password or the unlocking, denn u run cmd and type:
adb devices
i hope i helped
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
BTJustice said:
Where do you get the USB driver at because I am not seeing it at http://consumer.huawei.com/us/support/phones/ascend-xt/
Click to expand...
Click to collapse
Here is the site for USB drivers for all Huawei models:
http://huaweiadvices.com/download-huawei-usb-drivers/
Good luck....
Does the phone even have a fastboot mode?
RomLord14495 said:
Does the phone even have a fastboot mode?
Click to expand...
Click to collapse
Sure it does
Notes on booting up the phone (from power off)
Bootloader (fastboot) = power + volume down + USB hooked to pc
eRecovery = power + volume up + USB hooked to PC
TWRP = power + volume up
Click to expand...
Click to collapse
Optionally you put phone into bootloader/fastboot or recovery modes by typing from an adb prompt "reboot bootloader" or "reboot recovery"
Hi there. The website link for submitting your imei to get the unlock code doesn't work. Does anyone know how to get this code now?
dominoes20 said:
Hi there. The website link for submitting your imei to get the unlock code doesn't work. Does anyone know how to get this code now?
Click to expand...
Click to collapse
You'll have to use DC Unlocker and pay to unlock until the page returns
Since unlocking the bootloader is no longer supported, I have a suggestion but am afraid to try myself.
So, download stock version of rom (aka fastboot rom). Extract, replace recovery.img with twrp (renamed to recovery.img). Restart phone in EDL mode, flash. In theory, edl is working fastboot mode so it shouldn't matter if bootloader is unlocked, correct?
ezopantyd said:
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
Click to expand...
Click to collapse
Imma try this out, I’m stuck in a weird situation where my sd card slot broke. When I sent it in for service, they said it was rooted and refused to fix it. I specifically did not root it so that I could send it in for warranty service. So it’s mission to try and root, unlock boot loader etc so that I can have more storage space
---------- Post added at 11:50 AM ---------- Previous post was at 11:36 AM ----------
ezopantyd said:
there is easy way to get unlock bootloader pass for all huawei
just by IMEI search on google "hardreset24 unlock bootloader" there is full info how to do it
Click to expand...
Click to collapse
Can you be a little more specific? I didn’t get that info on google
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step
lets get to it
place the magisk.apk and the stock boot.img
in the internal memory of your phone (downloads)
if you like to keep stuff organized :good:
3-step
follow the vídeo tutorial and use magisk manager
to patch your stock boot.img it will output a new
boot.img that includes magisk Root (patched_boot.img)
https://www.youtube.com/watch?v=BF4_hnKgjFA
ps: major ty to hovatek team for this great tutorial
step-4 use Google drive or usb OTG to get the patched_
boot.img to your PC and place it in the ADB folder
once you have oem(bootloader) unlocked just
rename the patched_boot.img to boot.img
step-5
unlock oem, these qilive devices wont unlock
the bootloader even if you enable it in DEV options
enable USB debug in dev options
you will need to use ADB commands
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot oem unlock
(MAJOR WARNING the fastboot
oem unlock will wipe/reset/factoryreset/delete your data)
after you give the command small letters will appear
on the phone screen(yes or no) hard to read dont be hasty plz
use VOLUME+ to select and VOLUME - to confirm
note: when my phone ended the unlock it whent back to
that black screen where you choose fastboot-recovery-restart
and was stuck there, side keys did nothing if this happens
just long press the power key for 10 sec it will shutdown
then press power again to turn on
first boot after unlock will take longer then normal dont freakout
after you unlock small letters will appear during boot up saying the device
is not safe unlocked ,you can later use ( fastboot oem lock )
step-6
flash the patched boot.img with ADB
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot flash boot boot.img
finished/ok
command- fastboot reboot
and voila you should now have magisk
installed in the app drawer, open it!!
step-7 run the install one final time from the
magisk manager and install magisk V16 using
recomended option it will verify/patch the boot image
Do NOT select the AVB 2.0 BOX it will bootloop the phone
and your done, enjoy your qilive rooted phone.
from this point on you can use the fastboot
command- fastboot oem lock
to remove the letters in boot up about the
device not safe unlocked
WARNING oem lock
will WIPE/FACTORY RESET again (god damn it!!)
ps: i had to install twice in a row,major pain in the ....
Repeat step 7 after Wipe/Reset
here is the stock boot for 2 qilive models
you can get the stock firmware for any qilive
at this site www.doc-doapi.com/EM/qilive/smartph...te_3m-fdd-cs_mul_20170818-110645_songlixin_PC
and get the recovery or boot from the unpacked firmware file
ps:my phone is the Q8SIN4GP AND ITS WORKING FINE
A VERY SPECIAL TY to topjohnwu (magisk creator), this man is nothing
short of a God damn genius!! , and if you can donate to him.
hope this helps other qilive users to root:highfive:
quick note on the qilive models, they have two model names
the cliente name in my case Q8SIN4GP
and the factory name in my model its 882912
in order to download the right firmware for your model
you need the factory model witch is what appears in the qilive
site above, it will be in the back of the phone or the original
box on a sticker just bellow the bar code, full model exempl
:Q8SIN4GP/882912 my firmware serves several models,
these Q8 models all start with 88xxxx WARNING
dont try this using the wrong firmware/boot file or you will DAMAGE your phone
Help with BOOTLOOP problems, if you find your self stuck in a bootloop
the phone wont go past the qilive logo and just stays there, dont freak out
you will loose your data but there is a way out
just keep pressing power + Volume up until a black screen with 3 options appears
when it does let go, use Volume + to select option and Volume - to confirm
select Fastboot or alternative select recovery and then select reboot to bootloader
both option will place your phone in Fastboot mode, once in fastboot mode
connect your phone to PC and use ADB commands to fix/bootloop
command- fastboot devices
serial appears
command- fastboot oem unlock (skip this if you use phone unlocked)
a confirm action option appears on the phones screen
use Volume up to say YES / or Volume Down to say NO
Warning oem unlock will WIPE/Factory reset your phone
once it finishes the phone will be stuck on the
Recovery/fastboot/restart screen just long press the power key
until the phone shuts down
start the phone again using Power + Volume up when the black
screen with the 3 options come up, let go and use Volume up to
select Fastboot mode and confirm using Volume Down
Once in fastboot connect your phone to PC and use ADB commands
command- fastboot devices
serial apears
Here you will flash the magisk patched_boot.img
the same image you used to root your phone
command- fastboot flash boot boot.img
it will say finished-ok (or similar)
command- fastboot reboot
the boot up time will be longer than normal
but the phone should now complete the boot
and present the inicial setup screen, select language
enter your mail, the usual bla bla...
any way at this point just repeat step 7
to get root running again
sp flash tools v5.1716.
phonedriller said:
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step....
Click to expand...
Click to collapse
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
Awsome work congrats, as for the recovery so far no luck so try not to go 2 crazy until a working recovery is up and working , install stericsons busy box this is always the first root app i install
If possible buy sterics busybox pro and titaniumbackup pro if you want to install apps to sd card apps2sd pro all of these can be tested in free
Version,again nice work congrats enjoy you rooted phone :highfive:
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
phonedriller said:
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
Click to expand...
Click to collapse
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
xdacktheresianum said:
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
Click to expand...
Click to collapse
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
phonedriller said:
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
Click to expand...
Click to collapse
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
xdacktheresianum said:
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
phonedriller said:
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
Click to expand...
Click to collapse
thank you, phonedriller
everything worked perfectly via SPFlash Tool.
and, referring back to our above questions re the possibility of getting TWRP onto the phones, a developer friend of mine writes me this:
>try to flash TWRP:
>Download following files from this link:
>https://mega.nz/#F!qZIgnJRK!5apBfYo1je0ytg-wmA6JMQ
>- Odin3 v3.12.3 (Complete folder)
>- twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>1. Start your Phone into download mode
>2. Start Odin (Odin3 v3.12.3\Odin3.exe)
>3. Click on Options and unmark Auto Reboot
>4. Click AP and select twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>5. Press Start and wait until finished (Reset or OK!)
>6. Restart your phone immediatly to recovery mode
>7. In TWRP Recovery click on mount
>8. Set the checkbox checked at system (that system is mounted)
>9. go back and click on advanced
>10. Open file manager
>11. navigate to system/build.prop and click on build.prop
>12. Click on chmod
>13. type: 0644 and hit the accept button on screen or at the virtual
>keyboard on your phone
>14. restart your phone
i haven't tried this, but am wondering whether it might seem "reasonably possible" when reading through it.
thanks
ckth
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
tommo1982 said:
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
Click to expand...
Click to collapse
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
I had issues with adds being displayed at home screen and I was not able to close them. I had to use NetGuard to find that FOTA talks to 'adsup' and it is a known malware provider. I learned that some of the system apps try to talk with Alibaba servers and AdOppo (whatever it's called). Kaspersky might not be wrong, actually.
I'm trying to download stock firmware, but I don't know the file name. The website with it is locked, so unless I know exactly what I need, I cannot download it.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
phonedriller said:
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
Click to expand...
Click to collapse
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
Ps use root + apps2sd or titaniumbackup to stop/disable the bad apps and replace them with playS app,not possible on all apps of course
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
tommo1982 said:
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
Click to expand...
Click to collapse
Flashing is super easy use spflashtools or. Odin compiling a Rom is not , were you able to get the original firmware? You will need the original firware to get the boot and partition info from what i read so far
Unfortunately not. I will ask at the shop where I bought it how to contact tech. It should be freely available. I don't understand why Qilive restricted access to firmware.
I'll post when I learn anything.
Well, you can download the firmware if you know the file name. The bad news is, it seems the stock firmware has malware preinstalled. If there is anyone who could help confirm it. I have the ROM, and I can upload it to Google Drive if needed.
Hi all,
I'm coming back to a question lingering since the very first post here and mentioned again in post #9:
Is there a successful way to install TWRP on this Qilive model?
Re this topic:
- has anybody tried/has anybody been successful with the procedure described in post #9?
and
- has anybody seen the following TWRP builders' version (do an in-page search on Q8S55IN4G2)
https://twrpbuilder.github.io/fr/downloads/twrp/
with the download belonging to it
https://androidfilehost.com/?fid=890129502657591798
???
any successful installations to report???
Wouldn't THAT be great!!??
thanks
xdack