I couldn't find much information on this case, so I went ahead and bought one. It was only $6.99 on Amazon so if I hated it I wouldn't be out much money. Please excuse the quality of the pictures. They were taken with my Note 3....
Here's a link to the case on Amazon if you want one:
http://www.amazon.com/Google-Nexus-...1442870153&sr=8-3&keywords=GMYLE+nexus+6+case
PLEASE NOTE:
I am NOT affiliated with GMYLE at all!!! I'm just trying to post some useful info for my fellow Nexus 6 owners that may be on the fence about this case.
First impressions:
The packaging was pretty uninspiring. It was in a cheap plastic bag with some GMYLE branding. Upon removal it felt very cheap and low quality, but what do you expect for $7? The piece that holds the phone felt pretty thin and flimsy and I was worried about cracking it when inserting my phone. After getting my phone in safely, I realized how much bulk this added to the phone. It feels twice as big and requires two hands to use safely. The cutouts in the case lined up properly for the buttons, headphone jack, microphone, USB port, etc.
Looks:
This case looks classy as hell. The world map design looks a lot cooler and than the plain brown design in my opinion.
Features:
The ID, credit card, and money slots are very handy, but after transferring the contents of my wallet (ID, three cards, and a five dollar bill) the case was about twice as thick as before and barely fit in my pocket. I watch a lot of movies on my phone so the stand feature is very handy.
Phone protection:
This case feels like it'll protect my phone from short drops onto carpet or the rubber floor at the gym. For drops onto concrete, hardwood, or tile I don't think it'l perform as well as my Ringke Max and may result in a cracked screen or dents/scratches.
Complaints:
There was a glue like substance on the "spine" of the case that wouldn't come off. Rubbing on it just discolored the fake leather and didn't phase the glue at all. The plastic bit that holds my phone feels very thin and like it will break if I try to remove my phone. If I use the flash while taking a picture it "bounces" off of the cutout in the case and causes a blur around the edges of the picture.
Conclusion:
This is a VERY nice wallet case for the money. It even comes with a one year warranty! I've only had it for a few days, but I like it a lot so far. I'll update this thread when/if this case falls apart. If you have any questions post them and I'll do my best to answer them.
Pictures:
The % of people that gave it a 3 or less is 43%. Not exactly confidence inspiring.
For those with $45 to spend on a wallet case, here's the real deal: http://www.ebay.com/itm/genuine-rea...ury-premium-/381110007692?hash=item58bbed378c
wolfen69 said:
The % of people that gave it a 3 or less is 43%. Not exactly confidence inspiring.
For those with $45 to spend on a wallet case, here's the real deal: http://www.ebay.com/itm/genuine-rea...ury-premium-/381110007692?hash=item58bbed378c
Click to expand...
Click to collapse
This is by no means a long term or high quality case, so the low ratings are understandable. I bought it just because the world map design looks boss and the stand feature is handy for watching movies.
To be honest I'm thinking about ditching this case. The flap is annoying, it barely fits in my pocket, and I have to remove my phone from the case if I want to take a picture with the flash.
The map pattern looks good for the low price, is it heavy? I don't want to add too much weight to the phone
atominvention said:
The map pattern looks good for the low price, is it heavy? I don't want to add too much weight to the phone
Click to expand...
Click to collapse
I have no idea of the exact weight, but it's definitely not light. It adds a noticeable amount of weight to the phone.
I got this one:
http://www.amazon.com/gp/product/B00STQD9PU?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
While I like the idea of having everything in one piece, it does add a significant amount of heft and weight to it, especially since it's a bi-fold wallet. I still use it occasionally.
I had the GMYLE case for a few weeks (plain brown, before worldmap was released), and I loved it. Combining the phone with wallet was pretty awesome. My main gripe with the case was that over time, small parts of the phone case part (plastic) would chip off, eventually to the point where the case would no longer hold my phone. Before this, I had the Spigen wallet case, which wasn't bad, just the magnet strap thing was getting a lot of wear (always hitting my pocket on the way in).
Now I am using the Vena that jbr05ki posted. I like it a lot. The magnet seems more durable than the Spigen one, and the tri-fold design is nice to have. Overall, I would prefer the GMYLE due to the strapless design, if only the phone case part of it was made of TPU.
*EDIT* Also, forgot to mention that I have had two glass screen protectors, and using the wallet cases seemed to crack both of them...not sure why though, since I put the phone in my front pocket and not my back...
jbr05ki said:
I got this one:
http://www.amazon.com/gp/product/B00STQD9PU?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
While I like the idea of having everything in one piece, it does add a significant amount of heft and weight to it, especially since it's a bi-fold wallet. I still use it occasionally.
Click to expand...
Click to collapse
I wanted a REALLY slim wallet case, so I went for the Nilkin sparkle black on Amazon. At $15 USD, it was cheaper than the $40 leather alternative that caught my eye...
Sent from my Nexus 6 using Tapatalk
Related
So when I first received the new Seidio Convert Case, I was pretty excited. I thought it couldnt get any better then the Active case Seidio makes but I was wrong, dead wrong. The Convert case is practically two cases in one. It’s a Seidio Surface, with an add on silicone inlay that goes over that, and then an exoskeleton that goes over that. O and if that isn’t enough, you’re getting a waist clip, which your phone goes into for easy access, and a Seidio Screen Guard. Providing the maximum in protection, this case makes the Otterbox weep in shame. I used the case as a the Surface case first for a day, and it is great, its light weight, easily removed and provides just the right amount of protection for the light weight and little size it adds to your phone.
The silicone overlay, covers all the ports to the phone, headphone jack, speakerphone, and volume rocker. The only access that is open to the elements is the screen and camera toggle switch. Even the back cameras are protected by a silicone cover, that covers the cameras while not using and while in use, can be clipped into the case, keeping it from moving around. Now I know most people have problems accessing the ports, while the are covered, but these port covers have little grips on the outside so you can easily pull them up from covering the ports themselves, this makes access extremely easy and quick. Now my biggest gripe with the Otterbox is that the covers for the ports always ripped or tore off within the first week, but with Seidios silicone there is no sign of ripping or tearing in sight, which is a major plus! This only confirms in my mind the quality of Seidio’s products.
The waist clip/holster is another bonus, once the phone is clipped into the holster, you can lock it in, so no matter what you cant unlock it, providing you with the comfort that the phone isn’t going to pop out, like so many of my phones have down before. This clip, on top of the surface, silicone and convert skeleton makes this case the most rugged and provides the most protection, the best of both worlds.
The screen guard on the phone, which no matter what, I always buy for my phones, is amazing as well. Clear and smooth as glass. Covers the whole screen including the four home buttons on the bottom, which the Sprint OEM guards don’t do. I really like how the screen guard covers the whole screen, because unlike most cases, the whole screen is open for use, none of it is covered from the case itself.
Since using this case, I have dropped my phone twice and unlike other people’s reviews on the Convert case for other phones, the exoskeleton is still in tack with no sign of abuse. My phone is completely scratch free, like I expected it to be.
However, after that, I used it as the Convert, and have been for the past week, and I will never use another case. Although, the only two down sides that I have with this case is that it adds a little bit of size and weight to the phone. But for the amount of protection you’re getting in return, it’s a fair and well worth trade. The second downside, which isn’t even that big, but, should be noted is that the silicone inlay does attract a little bit of lent, while in the pocket. besides that, I really see no downside to this case.
I would have to say after using this case; I would give it a 9.9/10. And would highly recommend it to anyone I know!
MORE PICS:
MORE PICS:
How much was this case ?
This case is retailing for $69.99 with the holster, without the holster it costs $49.99. For the protection your giving your phone its totally worth it.
Isn't this case similar to the platinum series case from bestbuy ?
Matty Mo said:
This case is retailing for $69.99 with the holster, without the holster it costs $49.99. For the protection your giving your phone its totally worth it.
Click to expand...
Click to collapse
Just an FYI, it is $49.99 for the case with a holster for the convert case, the $69.99 is if you want a holster for the smaller case too.
DarkManX4lf said:
Isn't this case similar to the platinum series case from bestbuy ?
Click to expand...
Click to collapse
It's the same thing. I bought mine at BB but it didn't come with a screen protector which was fine with me since I'm a fan of InvisiShield. I wish that it did come with a holster for the surface case though.
Good review!
That case is worth every penny.
Best prices I've seen
This is for the convert combo like the review above:
http://www.amazon.com/Seidio-BD4-HK...9LR0/ref=sr_1_1?ie=UTF8&qid=1311006177&sr=8-1
and this is for the convert combo value pack:
http://www.amazon.com/Seidio-BD5-HK...9LPC/ref=sr_1_1?ie=UTF8&qid=1311006177&sr=8-1
What makes the value pack different is that it comes with an extra surface holster so if you wanted to, you can rock the covert/holster for max protection or roll with the surface/holster for less bulk. Depending on what protection or mood you are in for the day.
For a couple of bucks more I went with the value pack. Oh and this bundle also includes 1 screen protector.
btw, nice review.
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
I used the Incipio Feather for a few months. I really liked the "low-profile" but it was very fragile. I ended up cracking two of them just from taking them off to do battery pulls. As far as grip goes, it was generally nice to hold but doesn't offer that much more grip then the phone by itself. I've also used the Ballistic SG and while it was too bulky for me it had excellent grip. I was able to put it on my lap, back facing down, while driving and it never moved.
Currently I use the Speck Candyshell and it holds up pretty well. Grip can become an issue if your palms get sweaty as the exterior is all hard plastic.
Maringer said:
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
Click to expand...
Click to collapse
I had the feather. After two drops on different corners, the case had cracks. I expected as much and the case did its job. I got the Incipio silicrylic case as a replacement, which has a silicon cover AND a hard cover. It's slightly bulkier than the feather, but it still looks good and is definitely more sturdy. Case is grippy but not overly grippy where you have a tough time putting the phone in your pocket. I can remove the case without fear of cracking it, unlike the feather.
I had one of the Incipio Feather's also. It lasted about 2 months before it completely fell apart. Is is a nice case and I really liked the feel and look of it and it will fit in the car dock with a little modification. But it is not rugged enough for me to recommend. I am using a TPC case now. Does the job. Easy to remove to put in my Car Dock, LapDock or Standard Dock. It feels much better than the Atrix does by itself. But it is kinda ugly. But I have dropped it a few times and it keeps my Atrix safe.
The Seidio Active was my choice and I like it a lot. Two pieces - rubber with hard shell skeleton protects it nicely.
I can remove it (to dock) in seconds and replace it quickly too. Got it at Amazon: http://www.amazon.com/gp/product/B004WKIEF2/ref=oh_o03_s00_i01_details
That's the sapphire blue one, but they have other colors.
I'm using the otterbox commuter case. I got it off of Amazon.com for only 20 bucks on Saturday. So far it's been amazing
Sent from my MB860 using XDA App
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Of all the experiences I have read about cases and their compatibility with docks, the only one that I have heard that works is the Incipio Feather (or somehting similar) when taking in the consideration of actually not removing the case.
troycarpenter said:
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Click to expand...
Click to collapse
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Yes, I have read that people just simply remove the insert that is in the docks and it fits just fine. I have seen pics before too but can't remember where I saw them. Maybe I can try to find them.
troycarpenter said:
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Click to expand...
Click to collapse
---------- Post added at 11:29 AM ---------- Previous post was at 11:16 AM ----------
Here is a thread about a mesh cover (which is essentially the Feather but with a mesh look) and the second link is a post of someone in that thread showing the Atrix in the car dock with the case on.
Thread:
http://forum.xda-developers.com/showthread.php?t=1194096
Post with pics:
http://forum.xda-developers.com/showpost.php?p=16704009&postcount=27
Here is another thread discussing (and maybe confirming) the Feather working with docks:
http://forum.xda-developers.com/showthread.php?t=982574
The Incipio feather will fit in the car dock with the cardock insert removed, but the latch wont close. It has a ridge that comes over the face of the phone, but sits on top of the feather case. It will work if you make sure you have it inserted firmly all of the way in. I take corners pretty fast and had it fall out a couple of times. I modified mine to make the latch close pretty easily. Put it in the cardock and marked the outline with a X-acto knife. Used diagonal cutters to cut the 2 short vertical cuts. Scored the Horizontal mark with the X-acto knife and snapped the piece off with some lineman pliers. Now that these are $10 apiece I am tempted to get another one (or 2). Just was not worth the 25 bucks I paid 6 months ago.
Thanks for the various comments about cases.
I've looked at the various recommended cases and think I'll probably have to give the Incipio Feather a miss if it is as fragile as others have mentioned. I'm based in the UK so I'd have to order the case from the US (can't locate a UK seller) and this would cost me the equivalent of around US $ 45.00 which is a bit too much for something which won't last long!
Various other hard cases aren't available in the UK either (or not at decent prices) and, for me, the most important thing is to have a case lacking in bulk.
The Otterbox Commuter is the only one I get can get reasonably cheaply from within the UK (about US $ 20) but I'm not taken by the look of this.
Therefore, I think I've settled on the Seidio Surface which looks to have good reviews and will hopefully be the sort of slimline case I can deal with. I can obtain this via Amazon UK from a US seller for a mere US 36.00!
Incidentally, in the monster "Ruggedized battery cover" thread, there was mention that the Seidio Surface fits the lapdock and can be easily removed for the car dock:
http://forum.xda-developers.com/showpost.php?p=16600986&postcount=379
I don't own either dock so this isn't really of relevance to me!
I started looking for a discrete case for the same reason (battery door is way too slippery.)
There were some Chinese-made rubberized battery door replacements that seemed popular a while back. Most of the mobile accessory sites that carried them sold out, though I found and ordered one on eBay. The seller seems to have more:
http://www.ebay.com/itm/Back-Cover-...ltDomain_0&hash=item415bd6c69c#ht_2880wt_1085
I just got my yesterday. Fitment is surprisingly accurate, no misaligned cutouts or anything, and the added bulk is acceptable. Feels much better in hand now, too, when typing in landscape mode. It takes a deliberate effort to free the phone from the case, as it has a couple of tabs that clip into the retaining slots used by the factory battery door. Haven't noticed it snagging or coming loose as it goes in and out of my pocket either.
edit:
I just noticed the "dock fitment" discussion going on in this thread. I can't say anything about this case + docks since I don't own any docks.
I fashioned a case out of 3M carbon vinyl wrap. Keeps that Carbon Fibre effect on the back case whilst making it much more grippy (never dropped it since) and much more aesthetically pleasing as it gives off a 3D carbon fibre effect.
I can post pics if you like
Also worth mentioning you can pick this stuff up dead cheap off eBay - http://www.ebay.co.uk/itm/30x20cm-G...arParts_SM&hash=item4cf189dd66#ht_1792wt_1163
This sheet will give you a few attempts at it. It took me 2 to get mine the way I liked it
If you are just looking for grip without affecting aesthetics the Zagg Total protection is a great option. Clear is nearly impossible to tell it is on there. It is the same material and install as the screen protector. So no residue when removed. Make sure you read/watch the install tips from Zagg. I have been using it since April without a drop.
I have; however, decided to get a case and am trying the Seidio Active. The wife got the Incipio Silicrylic. both indeed fit in the HD/Standard Dock with the insert removed, I'm curious about whether there is enough support from the back of the dock though. As mentioned, I'm guessing the car dock will not close due to the extra couple millimeters, but will try it out and reply if it does indeed work.
Well, the Seidio Surface winged its way across the Atlantic reasonably quickly and I received it earlier this week.
It is very slightly bulkier than I expected but it is still very slimline so this isn't a problem as it still fits in my pocket easily. A little more difficult to take the phone out of my pocket than previously but again, not really a problem.
The surface of case itself isn't as 'grippy' as I expected, either, but it is a great improvement to the usual slick battery cover and I haven't juggled with it yet this week! I can now operate the phone using one hand if necessary without fear that I will lose my grip and drop it.
There are a few small imperfections on the back of the case - it would seem as though there were a few specks of dust or some other substance on the case before it was covered with the rubberised coating as a few tiny bumps can be felt. Not enough of a problem for me to bother returning it all the way to the US, however!
It is slightly tricky to take the Seidio Surface off the phone - it seems to come off easily sometimes but remain stubbornly in place at others. I think I'll need to practice taking it on and off the phone a bit more until I get the knack.
Overall, I'm reasonably impressed with the case and would give it an 8/10. It would have received a higher score had it not been so ridiculously expensive for me to buy here in the UK - Amazon.com are selling it at approximately half the price I paid!
I am going to get a s4 soon, and I am wondering if I will need to get a case. Currently on the charge, and when I bought it I got the thicker case vzw offered. Within two weeks it was off, and I have used the phone naked ever since. I have dropped it countless times onto tile and concrete, and the only damage is a few scratches on the back cover and dents in the part of the bezel that extends past the screen (raised edge).
I have read that the s4 is quite fragile. Based on the above, should I get a case? If so, can I get the smallest one available, or should I opt for something bigger?
Sent from my SCH-I510 using Tapatalk 2
JihadSquad said:
I am going to get a s4 soon, and I am wondering if I will need to get a case. Currently on the charge, and when I bought it I got the thicker case vzw offered. Within two weeks it was off, and I have used the phone naked ever since. I have dropped it countless times onto tile and concrete, and the only damage is a few scratches on the back cover and dents in the part of the bezel that extends past the screen (raised edge).
I have read that the s4 is quite fragile. Based on the above, should I get a case? If so, can I get the smallest one available, or should I opt for something bigger?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
It's all going to be up to your personal preference. Based on what you said, I would highly recommend a case. The S4 is pretty damn fragile and it's just not worth the risk if you have a history of dropping your phone. As for the size of the case, that is going to be up to you. Obviously the smaller/minimal cases will offer less protection. I like as little bulk as possible so that's fine with me and I have the Spigen Neo Hybrid on my S4 right now. Also consider a screen protector (plastic, tempered glass, etc.). Costly purchases but worth the $250+ investment into your new phone imo. :good:
Dropped mine one time on flat tile from hip height and screen cracked and would not display an image.... Get a case.
Sent from my SCH-I545 using Tapatalk 4 Beta
I use a speck Candyshell and it doesn't add much bulk or weight to the phone at all, thats my recommendation. The smaller and light silicone cases just don't offer the kind of protection a hard case does. The Candyshells are on the more expensive side, but you can get them on Amazon cheaper than you can on Speck's website
dust. said:
It's all going to be up to your personal preference. Based on what you said, I would highly recommend a case. The S4 is pretty damn fragile and it's just not worth the risk if you have a history of dropping your phone. As for the size of the case, that is going to be up to you. Obviously the smaller/minimal cases will offer less protection. I like as little bulk as possible so that's fine with me and I have the Spigen Neo Hybrid on my S4 right now. Also consider a screen protector (plastic, tempered glass, etc.). Costly purchases but worth the $250+ investment into your new phone imo. :good:
Click to expand...
Click to collapse
How do you like that case? I have the white on order (as well as the glass screen protector) and was wondering if it looks as good as it does on Spigen's website.
If you're ever going to drop your phone than a case is a good idea.
If it doesn't offer protection to the four corners it's not worth it.
I saw a brand new GS4 dropped from waist height onto asphalt and it bent the metal rim around the screen and messed up the front facing camera.
The guy had a case on it, but it was a plastic sleeve with a stand that didn't cover the corners.
As far as screen protectors go I think they're a waste of money. The phone has gorilla glass. Unless you find yourself regularly working with materials that are actually hard enough to scratch the screen, it's just going to be another layer for glare and bubbling imperfections.
I had a Droid Charge for 2 years and only scratched it once, when I had some marble dust under my finger nail.
JIHAD MY BOI.
I currently have an Incipio DualPro Shine on my S4. Offers pretty decent protection without being stupid thick, like the otterbox.
Sent from my SCH-I545 using xda premium
Yeah I don't have any scratch problems and don't care about cosmetic damage. The main thing I'm worried about is functionality breaking, like screen shatter or sensor damage.
Sent from my SCH-I510 using Tapatalk 2
I found the phone without a case too slippery and knew it would be dropped. I got the urban armor gear case and love it. IMO it is the the best mix of protection, slimness, and cool factor
Sent from my Galaxy S4
probably a good idea
I have a screen protector and a casemate toughcase on mine. A week or so ago I dropped the phone onto concrete from thigh level. I was scared as all could be that it would be cracked cause it sound like it hit hard, and it hit bottom first. Nothing happened luckily. I was wondering about the protection quality of that case, so far so good. It's a two piece case, and can be had for around 20 something bucks on amazon. I recommend getting a case.
I use a combination of a screen protector with the Spigen Slim Armor series case. Phone fits in it like a glove and adds very little bulk. I've dropped it a few times and it's survived with no issues. The case is a double layered rubberized with a plastic cover for looks, and it looks very sleek. It's worth checking out for sure. They're also on sale on Amazon for $14.99 at the moment, add a screen protector (also on sale for 6.99 and comes with 2) and some other random item and you can get the free shipping on orders over $25. Leaving you a link for the case and protector.
NOTE: When I added the protector to my cart and went to check out I noticed it added a iPhone 5 protector even though I was on the GS4 page, I had to remove and add a few times before it correctly showed the GS4 protector. Just a FYI.
EDIT: Well I can't post links because I'm under 10 posts. Sorry, they're just a quick Google search away though!
Get a case. I love having my phone naked, especially with my S4 because of how slim and lightweight it is - but therein lies the problem. I use an Otterbox Commuter case at work. Previously - while the Otterbox cases are good quality - I have refused to use them due to the bulk they add. However the S4's Commuter Otterbox case is fairly slim for a rugged protection case, so I decided to give it a go. It's really not bulky. The Defender on the other hand it way too much bulk for my taste.
I work in a transportation hub - around extra hard concrete floors, moving belts and machinery, metal grating docks, etc. - basically a rough environment. The first day I got the phone I went without a case, but with how slim and lightweight it is all I kept thinking was "I'm gonna drop it, it's gonna break, I'm gonna drop it, it's gonna break". So after work, I went and grabbed the Otterbox from my local Verizon store. I use it at work, and when I get home to my nice, soft, carpeted environment - I immediately take the case off.
A little over 2 weeks after I got it, I woke up and rolled over to check the time on my phone. It slipped out of my hands, fell about a foot and a half, and as it fell it hit against the metal rail on my bed (the frame that your mattress sits on) and landed on my carpeted floor. Grabbed it thinking it would be perfectly fine - it was a very short fall, it landed on carpet, and just grazed the rail. Took a look at it and the frame around the front of the phone, the faux metal one, had a huge gouge in it. I was very disappointed by this, but figured it was a freak accident. About a week ago, I got the Samsung Wireless charging pad for my phone. Set it up next to my bed, and as I was testing it out, I lifted one end of the charging pad while the phone was still on it, creating a slope. The Samsung Wireless Charging Pad doesn't have much of a grip to it, so it slipped off and made that same 1 1/2 foot fall from my bed to my floor, again grazing the metal rail on the way down. Again, I have another gouge in it. While this is a metal rail, it does not have any "sharp" edges to it. The edge itself is rounded, so it's gentler on objects that it comes in contact with, and it is covered by a bedskirt, again, helping to soften the blow should anything hit it.
Having learning my lesson (kind of) with the same freak accident happening with my phone hitting my bed in just to right way during a foot and a half drop (I have never dropped any of my previous phones...from my bed), I am looking into lightweight Carbon Fiber Skins to hopefully add a small layer of protection and sadly, I am resorting to also wrapping the bed frame in foam because I am stubborn and still refuse to use a case when I am not at work.
The point of this long drawn out story is that in my experience - as beautiful as this phone is, and as much of a shame as it is - I highly recommend a case of some sort. Unless you want to be like me and start padding the environment around you. The phone does not seem to handle falls well, even over short distances.
---------- Post added at 03:30 AM ---------- Previous post was at 03:20 AM ----------
As an additional note, you don't need to go all out with a massively bulky case. I recommend something with dual layers though, the internal rubberized layer that helps absorb the shock from a fall and the outer plastic shell that protects against the dents/damage/etc.. While I have the Otterbox, I plan on making the jump to the Spigen Slim Armor Case, it looks much more beautiful than my Otterbox and slimmer too. I currently use their Glas.tR Screen Protector, having found that the glass gives it the naked feel that I love while still provided amazing protection for the screen. Their products really are top notch, high quality, slim, and don't take away from the aesthetic of the phone.
I'm using a blue android clone army case from cruzerlite
sigmaxaa said:
How do you like that case? I have the white on order (as well as the glass screen protector) and was wondering if it looks as good as it does on Spigen's website.
Click to expand...
Click to collapse
I really like the case so far. It adds a bit of bulk though on an already big phone so it can be a bit cumbersome at times to reach stuff on the screen with one hand (I have pretty small hands lol) but I think it looks great and I am very satisfied with my purchase.
I had mine naked for a week and was scared, it slid out of my pocket at the gym a couple times but onto a rubber floor, so no damage...got tired of being careful and threw on an otterbox commuter..loving it, feels more sturdy and i dont have to worry about it.
had a commuter on my s3 and that thing hit the pavement a good 3-5 times from about 5-6 feet up, no damage at all
Don't Hesitate
After about a week and a half of fretting about dropping it, scratching it, or otherwise, I was very relieved when I finally broke down and got a case. I'm using a semi-thick plastic/silicon case from CruzerLite.com. It's well worth it, looks cool (I actually get a lot of questions and compliments on it's design), and it's quite functional. It also doesn't add a lot of bulk! CruzerLite.com, check it out!
I have not used a case yet don't like the extra thickness. I've dropped it pretty good a few times but only dented the metal. Guess I been lucky
Sent from my SCH-I545 using xda premium
Heart Foxx said:
After about a week and a half of fretting about dropping it, scratching it, or otherwise, I was very relieved when I finally broke down and got a case. I'm using a semi-thick plastic/silicon case from CruzerLite.com. It's well worth it, looks cool (I actually get a lot of questions and compliments on it's design), and it's quite functional. It also doesn't add a lot of bulk! CruzerLite.com, check it out!
Click to expand...
Click to collapse
I got the bug droid exo from their website. There costumer is great
Sent from my SCH-I545 using Tapatalk 2
You need one
I got the otter box for mine, love it!
JihadSquad said:
I am going to get a s4 soon, and I am wondering if I will need to get a case. Currently on the charge, and when I bought it I got the thicker case vzw offered. Within two weeks it was off, and I have used the phone naked ever since. I have dropped it countless times onto tile and concrete, and the only damage is a few scratches on the back cover and dents in the part of the bezel that extends past the screen (raised edge).
I have read that the s4 is quite fragile. Based on the above, should I get a case? If so, can I get the smallest one available, or should I opt for something bigger?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
I too had a Charge before my Galaxy 4. I had a silicon case and I still dropped it all the time. It once hit the pavement with such force that it opened and the battery fell out....it still worked. I cannot imagine this kind of resilience on the s4.
However, I found what I think is a great case - it is made by Speck - a very thin harder plastic with a rim to protect the screen AND some kind of rubber ribs all over the back and the sides so you have plenty of grip. I've not dropped the phone yet and I know this case is a good part of the reason. I have the crummy plastic screen cover from Verizon and will be putting a better one on in the next day or two. I got the Speck case at Best Buy but have also seen it at Amazon http://www.amazon.com/Speck-Product...8-3&keywords=speck+case+for+samsung+galaxy+s4
[url]http://www.amazon.com/Speck-Products-CandyShell-Samsung-Galaxy/dp/B00C27R8MM/ref=sr_1_3?[/url]
ie=UTF8&qid=1373786228&sr=8-3&keywords=speck+case+for+samsung+galaxy+s4
Then I was still left without a clip for the occasional times when I don't have a purse or pockets. I found a Nitze black foldover case with a clip in the back. It is made with elastic in the middle so you can carry your phone and credit cards. I cut out the elastic and am now able to fit the S4 WITH the Speck case still on it. (Sorry but I can't find a link for that case now).
Hope this helps. As you can tell, I really love the Speck and it comes in several colors.
I could not find any reviews of this bumper. I was interested in getting it but I wanted to see if anyone had thoughts about it first.
http://www.casefanatic.com/samsung/luphie-metal-bumper-frame-samsung-galaxy-s7-edge/
http://www.aliexpress.com/item/For-...on-Aluminum-Frame-For-Galaxy/32625294136.html
Not for the S7, but I owned one for my Note5 up until last week, and man was it pretty. I got the Gold bumper to go with my White Note5. I also got a leather skin from DBrand and that phone was so pretty. It was nice quality, and I thought it was worth the cost. I purchased it from a stateside seller from Ebay who imported them from China for half the cost of casefanatic.com. The one thing I will caution is that only the very inside of the Luphie case is protected by a small line of foam, not the inside of the sides (if that makes sense). This means that the actual metal bumper of the phone itself will get scratched, metal on metal, leaving small lines all around the phone bumper. Also, my signal was affected just a little. I suppose that's due to the aluminum covering the antennas.
I don't know that I would buy it again, honestly. It did look very nice for sure. But, I think it takes away from the actual day-to-day function of the phone. I hope this helps!
actually, the brand of that bumper is Ginmic, not Luphie. These are 2 factories, design is the same but different logo.
here is the Luphie one. http://www.ipromarket.com/luphie-ra...er-case-for-samsung-galaxy-s7-edge-g9350.html
Quite expensive but damn, so pretty!
I own a silver aluminium Luphie bumper with the black leather backing for my s7. So far I'm pretty happy with it and it's not given me any hassles as of yet. One thing I was surprised by was the fact that the leather backing was not attached to the aluminium frame and was rather a sticky piece of leather that attaches to the rear glass of the phone. Not what I was initially after but it's been alright so far and it's very adhesive so that's good.
Very difficult to line up the leather backing when you first stick it on so take your time and start from the camera side heading down the phone. The backing makes the phone very grippy on surfaces so it's much safer to leave it on tables and stuff but the aluminium sides are a bit slippery and of course the phone feels slightly heavier. It does look aesthetically pleasing though and I can't fault the built in buttons on the Luphie bumper because they are excellent and haven't hampered the phone in any way.
I ordered them off eBay from a Chinese distributor and with post and packaging they came to $12 each.
Any other questions just ask and I will be happy to help..
zimcommando said:
I own a silver aluminium Luphie bumper with the black leather backing for my s7. So far I'm pretty happy with it and it's not given me any hassles as of yet. One thing I was surprised by was the fact that the leather backing was not attached to the aluminium frame and was rather a sticky piece of leather that attaches to the rear glass of the phone. Not what I was initially after but it's been alright so far and it's very adhesive so that's good.
Very difficult to line up the leather backing when you first stick it on so take your time and start from the camera side heading down the phone. The backing makes the phone very grippy on surfaces so it's much safer to leave it on tables and stuff but the aluminium sides are a bit slippery and of course the phone feels slightly heavier. It does look aesthetically pleasing though and I can't fault the built in buttons on the Luphie bumper because they are excellent and haven't hampered the phone in any way.
I ordered them off eBay from a Chinese distributor and with post and packaging they came to $12 each.
Any other questions just ask and I will be happy to help..
Click to expand...
Click to collapse
How was the signal reception? Has it dropped a bit due to the aluminum?
ejsoliveros said:
How was the signal reception? Has it dropped a bit due to the aluminum?
Click to expand...
Click to collapse
The signal reception seemed to stay normal. However the GPS was affected and would drop out every now and then when using google maps, waze etc.
zimcommando said:
The signal reception seemed to stay normal. However the GPS was affected and would drop out every now and then when using google maps, waze etc.
Click to expand...
Click to collapse
When GPS becomes glitchy, what quick fix do you usually do? Has it all been patience or have you discovered any workarounds aside removing the bumper? I could imagine having to switch cases when travelling I would be using a clear bumper case, all else I'd be using Luphie. Just ordered mjne for OnePlus 5t though.
When I realised that it was the case doing it, I was a bit bummed. Eventually I stopped using the case because it was not really simple to remove it each time. The screws make this a slightly more difficult task to do when you need it done on a regular basus. It's a real pity because it's an amazing looking case and I loved the protection it gave. I'm now using an abs plastic/slicon one instead, made by VRS design. No issues with GPS with this one and does the job of protecting everything well enough.
zimcommando said:
When I realised that it was the case doing it, I was a bit bummed. Eventually I stopped using the case because it was not really simple to remove it each time. The screws make this a slightly more difficult task to do when you need it done on a regular basus. It's a real pity because it's an amazing looking case and I loved the protection it gave. I'm now using an abs plastic/slicon one instead, made by VRS design. No issues with GPS with this one and does the job of protecting everything well enough.
Click to expand...
Click to collapse
That eventually would happen to me as well I guess. Still holding off order cancellation though haha! I ordered from Aliexpress and the seller has not shipped the product yet. I'm tempted to cancel but there is really no option of enjoying the feel of a skinned phone and a bumper since RhinoShield is too bulky for me I think and they have not released one for the OnePlus 5t yet.
A quick look at the UAG case for the fold
Considering its price tag... Do Not Buy
https://youtu.be/Hh3FxwK9Xk4
thanks for showing this, i had no idea this even existed. i thought the spigen ones were the only ones available.
this is clearly the worst possible case for the fold.
i completely agree with everything said in the video.
it scratched my fold. do not buy. stick to spigen
Saw this too late I'm afraid. Bought it via Amazon, it came from HK, needed to wait for customs to process (and charge an extra EUR17 or so) to then find out that the magnetic closure of the phone no longer works. Binned it. Shame.
After watching your video I actually bought the sockshock and using the fiber case
Worst case out there. I got one and not only does the spine keep it from laying flat but it won't stay closed. What a POS. Getting returned. I usually like UAG cases but this one needs a total redesign.
Why do you think the latter one is the better one in terms of the crash
I completely disagree with these opinions.
I bought this case due to an overwhelming fear of any damages or dust to a phone clearly more fragile than a normal one.
I'm right handed, and the hinge cover that protrudes out the back when the fold is opened becomes a great handle to dig my fingers into when holding it with my left hand so my right hand can do all the typing. It can also now be laid on a flat surface and asked upwards to watch a video hands-free.
The bumper protection is solid, the camera bump is well safe and it hasn't blown the size out so that the fold now feels clunky due to too much case.
The price is 30 dollars more than the spigen case, and for a lot of people I understand is prohibitive. But considering what we had to drop on the phone in the first place I wanted maximum protection. And I get it with this case.
However with both this and the spigen case I'm still taking it out once a day and checking for any dust that might get caught inside it and may work it's way into the hinge.
With or without a case there's the chance of foreign objects getting in, and that's no fault of the case design. We accepted this risk by buying a phone of this design and is up to us to be wary of all the issues.
Either way my vote is yes for this case. After a week it's quite solid, allows me to hold the fold a lot safer and I am confident in its protection.
I knew of the spine issue. If that was the only issue I would have kept it. The deal breaker for me was it would not stay closed. I agree it provides better protection that the Spigen thin armor. For the price, they could have done so much better. I have a UAG on all my other phones that one is available for. This is the only one I could not tolerate.
If it works for some, great! Just does not work for me.