Hi guys.I have a problem for a long time.When I plug the charger to phone charging very slowly.I tried many roms it not changed anything.I flashed boafella kernel and looked charge status.It showing charging with 100mA.I tried changing my charger first it worked but now slow again.My sister bought an S6 and S6 charger worse than normal charger.When Im using the boefella kernel (Im changing the charge rate to 1600ma and forcing it) I can charge in 3-4 hours.When Im not using its chargin in 22+ hours.What can I do?
Guess its time to get yourself a new battery.
New battery is not going to solve this issue as I too have the same problem & have an original new battery replacement.
I changed the charging port.I hope the problem will fix now.
ArdaCsknn said:
I changed the charging port.I hope the problem will fix now.
Click to expand...
Click to collapse
See if it resolves, else other could be an issue with charging ic.
Ok Its still same.Its charging on 1100ma when the plugin charger but after 10 min its dropping to 100ma and not charging anymore.Am I need new battery or what?
I have the same problem.. Charging is so ****ed up with my Galaxy S3 . I use Boeffla Kernel and crank the Input Volt to 1400 Mah. I think our Beloved phone is getting Old.
Animesh Singh said:
I have the same problem.. Charging is so ****ed up with my Galaxy S3 . I use Boeffla Kernel and crank the Input Volt to 1400 Mah. I think our Beloved phone is getting Old.
Click to expand...
Click to collapse
Yeah :/.I will wait until 4.5G comes to Turkey.But why its not charging Im really wondering.
If your charging current drops & don't want any hardware fix then you can use Boeffla Kernel & switch on the Ignore Unstable Power & Ignore Safety Margin, and keep AC Charging Current at 1000mah or above.
tariq2kn said:
If your charging current drops & don't want any hardware fix then you can use Boeffla Kernel & switch on the Ignore Unstable Power & Ignore Safety Margin, and keep AC Charging Current at 1000mah or above.
Click to expand...
Click to collapse
Yeah thats the only way.Thanks for your helps
Related
Hello,
I live in Australia and bought my I9300 from HONG KONG.
I had this charging issue from 2 weeks ago and I've searched many thread about i9300 charging issues.
Today I decide and just sent my s3 to repair shop and I asked them about change of charging port of my s3.
1. Sometimes my s3 charging alright but not fast as before it depends on time like 1% per 4 min or 1% per 9min. Sometimes not charging just discharging while A/C charger connected.
2. The charger as usb line + wall charger works alright without disconnect problem (but charge speed was slow).
3. The charger as like wall charger just line with wall charger not usb. (disconnect if connect wall charger)
I'm really confused this problem was related with hardware or software.
I'm not sure if the charging port replaced will solve the problem.
Please give me opinions.
Thank you for read and sorry for my English.
Regards,
Jin
First try to turn off your device and connect it to the wall charger, the device should start recharge without starting the android os.
second, is the wall adapter getting extremely hot while charging slowly?
third, try to charge with your computer usb port.
fourth, try to find someone with different phone and use his battery for a day. is it the same?
if you know a bit electronics, i suggest you to check your battery voltage using AVO-Meter, if it much lower then it should be (written on the battery itself) it means that somehow your battery reached end-of-life (maybe you bought used one?)
Thanks for reply.
I've already tried my sister's battery, too.
So I know the problem was not related with battery life.
This problem make me headache everyday.. I'm bit worried about phone repair will be completed well because I have to pay money...
PS: I have custom rom foxhound 4.1.2 jellybean ver. and I already downgrade to ICS Omega rom previous time. And this problem first happened when I used ICS Omega Rom.. so confused about hardware or software problem.. I just woke up 2 hours ago and can't go to sleep because very worried about repair phone thing..
if your concern is about software why wouldn't you just flash the phone stock rom? do you have any backup?
dont know if all of you having this prob. but my bro's device charging rate is very slow 4% charging in 20 minutes. this is not good if wanna go for travelling or any and full charging tooks 4+ hours. any suggestions ? and i tried wiping all system,data,cache but problem is not solved. please help me.
Check Kernel Settings
Maxx247 said:
dont know if all of you having this prob. but my bro's device charging rate is very slow 4% charging in 20 minutes. this is not good if wanna go for travelling or any and full charging tooks 4+ hours. any suggestions ? and i tried wiping all system,data,cache but problem is not solved. please help me.
Click to expand...
Click to collapse
Check the AC charge Current in ur kernel settings maybe uve accidently set it below default. Ideally it has to be 1100 but 1300 works without any issues for me.
Charging speed will also vary upon Output current of ur charger. Stock sIII charger outputs 1A Which should charge your phone in approx 3hrs. Time will reduce considerably if u purchase a 2A charger.
A bad Battery or Corrupt Charger can also be the issue. So try to experiment with different chargers. also check if Battery is swollen( Happend In My case)
lastly Miscalibrated Battery will also show u improper readings so try to callibrate it with battery calibrator
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
Mostly it has to be Amongst Kernel Settings or FAULTY charger
Stock standard charge time multiple answers about 3 hours .
use usb cable from Nokia phone:good:
My phone has to charge more than 24 hours to fully charge...I'm using the stock wall charger and i'm on KitKat 4.4.2 Teamsek unofficial v42 using Boeffla Kernel 2.2 beta1. What to do ?
Reyko97 said:
My phone has to charge more than 24 hours to fully charge...I'm using the stock wall charger and i'm on KitKat 4.4.2 Teamsek unofficial v42 using Boeffla Kernel 2.2 beta1. What to do ?
Click to expand...
Click to collapse
must be your charger. try an other charger ?
3 25338285
PAYload1976.dl said:
must be your charger. try an other charger ?
Click to expand...
Click to collapse
Will do but I also noticed that my wifi is always on even if I turn it off.
reset your battery info
Reyko97 said:
My phone has to charge more than 24 hours to fully charge...I'm using the stock wall charger and i'm on KitKat 4.4.2 Teamsek unofficial v42 using Boeffla Kernel 2.2 beta1. What to do ?
Click to expand...
Click to collapse
root your phone ,and reset you battery info,and take a deep charge
Reyko97 said:
Will do but I also noticed that my wifi is always on even if I turn it off.
Click to expand...
Click to collapse
Maybe the charger or just the cable may be faulty so you need to check first.
Second, if you are turning off wifi from the toggle, then try turning it off from the settings manually. If you think this is related to the ROM, then you can ask in the relevant thread for assistance.
~ RazorMC
chujung24 said:
root your phone ,and reset you battery info,and take a deep charge
Click to expand...
Click to collapse
How do i reset my battery and deep charge ?
1. Slow charging is because bad charger (if you have root and for example Boeffla kernel, you can force fast charge).
2. Wifi always on is because you have set in wifi -> advanced ->always allow searching for accurate location.
The names of path and settings are probably wrong, because i have Czech language, so i dont know how it is called in English.
Solution:
1. buy new charger
2. turn off searching wifi for location purposes.
Before buying a new charger altogether, you can just test what happens if you try to charge it via usb port, you should have a microsd cable lying around somewhere. USB ports only give 500mA but it should still charge in a few hours.
If it still doesnt charge, it might be either the charger module in the phone or the battery. I had a faulty microusb input in my old i9100, it prolonged charging hours.
charge to 100%，open rootexploer ，find /data/system/ba tterystats.bin,delet it,never charge it until it drains completely。
Switched chargers and now it charges in 3 hours...
Since you're on Boeffla Kernel, you can download and use "Boeffla-Config" and increase the AC charging current from 1100 mA to a higher number and turning off Ignore Unstable Power and Ignore Safety Margin.
And increase USB charging current from 475 to 500 mA this will provide you with faster charging speeds.
P.S Increasing USB Charge Current To anything beyond 500 mA has no effect on USB 2.0 ports since these ports provide only 500 mA output current no more.
Hi.
I have my razr almost one year and from last few months I have problem with battery. My soft is slim kat.
When I'm charging with orgiginal charger battery is charging to 100% and than charger making nosie (whistle) and I think it's not normal so I changed charger and using now a little bit different (lower volate but just a little bit) that I got from last phone... but when charging and let say is 40% and than will unswer the call or disconnect from charger than bettry jumping to 100% but when going to recovery than is showing that 40% but when reboot again to system than system is showing 100%... how to fix it ? why it's like that ?
and one more think before I tried to calibrate bettery so download soft plug my phone to old charger and was charginf to 113% !! why ?
Regards,
siamer
siamer said:
Hi.
I have my razr almost one year and from last few months I have problem with battery. My soft is slim kat.
When I'm charging with orgiginal charger battery is charging to 100% and than charger making nosie (whistle) and I think it's not normal so I changed charger and using now a little bit different (lower volate but just a little bit) that I got from last phone... but when charging and let say is 40% and than will unswer the call or disconnect from charger than bettry jumping to 100% but when going to recovery than is showing that 40% but when reboot again to system than system is showing 100%... how to fix it ? why it's like that ?
and one more think before I tried to calibrate bettery so download soft plug my phone to old charger and was charginf to 113% !! why ?
Regards,
siamer
Click to expand...
Click to collapse
You should use the original moto charger. Might be that yours faulty, should get a new one.
Also, once let the battery discharge completely. Then turn it off and give it a full charge.
After that, try keeping your battery between 20%-80%..And once in a while, do that full discharge-charge cycle.
ok will try to find exactly same charger, didn't know that little bit different charger can make problems...
I always discharging my phone to 15-20% and than charging...
Will try to charge when is off as you said as well...
thanks,
siamer
Read this..
http://forum.xda-developers.com/showthread.php?p=52581013
Some posts at the last are about same..
Razr HD with Tapatalk Pro
for now I will use than charger from my asus meepad is stronger a little bit so maybe will be better
thanks again
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
vichucoolics said:
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
Click to expand...
Click to collapse
download amps app and check current rating feed to your phone, fast charge > 2500 mA, if lower, try change your charger.
vichucoolics said:
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
Click to expand...
Click to collapse
After the update mine also shows 3hr's to charge and slowly charging. I brought the phone 10 days back and updated to this 9.6.25 a week and facing this problem.
Have no problem at all with Poco f1 Miui 9.6.25. Charging time is around 1hr 45 to 2 hrs if not mistaken.
izharie said:
download amps app and check current rating feed to your phone, fast charge > 2500 mA, if lower, try change your charger.
Click to expand...
Click to collapse
Ive already tried it it shows almost 1450 ma
And ive tried with different cable ... different charger and even qc3 power bank no luck so far could it be a hardware issue in my phone?
vichucoolics said:
Ive already tried it it shows almost 1450 ma
And ive tried with different cable ... different charger and even qc3 power bank no luck so far could it be a hardware issue in my phone?
Click to expand...
Click to collapse
Try to charge below 50% from current battery level.my stock charger rating 5V 2.5A..can get around 2.2A reading from app.
Its starts slower then it gets faster , from 10% to 100 % in under 2h , so its working properly.
vichucoolics said:
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
Click to expand...
Click to collapse
Having the same issue, plz help regarding the same
Buncy said:
Having the same issue, plz help regarding the same
Click to expand...
Click to collapse
Don't worry its just a software issue I just flashed the miui 10 beta Rom and now everything is fine it shows the QC logo also
Me too facing the issue. In the screenshot, charging at 18% and showing 920 mAh
Me too facing the same issue and i am on Miui 9.6.25 as well.
I just had a chance to check it, as I recently upgraded to 9.6.25. Well, no changes for me - there is QC icon next to the battery and Ampere shows current reaching 2900 mA.
katoda_ltd said:
I just had a chance to check it, as I recently upgraded to 9.6.25. Well, no changes for me - there is QC icon next to the battery and Ampere shows current reaching 2900 mA.
Click to expand...
Click to collapse
Can you upload a screenshot of ampere while charging
Here you are.
Buncy said:
Can you upload a screenshot of ampere while charging
Click to expand...
Click to collapse
Please check it out
You guys don't use the search function on the thread and just keep on making new threads about the same issue.
It has been well documented now that the charging slows due to thermal throttling. The hotter the phone the slower the charging. If anyone wants to test this, charge your phone for 5 mins before an air conditioner and measure the charging speed using the app called 'Amps'.
You should see the charging speed at around 2700-2800mah provided your phone temperature is quite low.
Otherwise, take a chilled watter bottle from your fridge and pour it generously on a towel. Now place your phone on that towel and charge you phone. As soon as the temperature starts falling to around 32-34 degree celsius, the charging speed will increase.
This is built in safety feature. The charging slows when the battery temperature is around 36-37 degree celsius as per my observations.
Cool you battery to around 30 degrees using any method you can and then check the charging speed.
Not your charger, not your cable...its mostly the charging algorithm with built in thermal thresholds which is at play here.
DO TELL ME YOUR TEST RESULTS.
I just found this thread - I have similar problem but it's rather not connected with temperature.
After one of software updates I discovered that quick charge is not working. Maybe it wasn't connected with update but this is how I see this.
I was waiting for software updates and hoping that they will fix my problem but nothing was changing.
Recently I decided that maybe factory reset will help, but unfortunately no.
After this reset I was checking many chargers and it appeared that with laptop charger (with USB C output) quick charge works! I was checking parameters in application 'ampere' and there is information that this charger is AC, and rest is USB. So it looks like QC works but....
Please help, how can I make quick charge works again via standard quick charge charger.
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc
Iam in 11.0.5.0 global rom can any body confirm if its a rom issue or my specific issue
I want to clarify that my Poco on fully stock 11.05 charges as fast as any previous version of MIUI.
I take care of my battery. Charge till 80 and never let or go below 20.
If you can maintain the variables, and it still charges slow then you have issues with battery IC or the battery itself.
The highest I got without ceiling fan and without ac is 1590 mA. Maybe I got higher other times but I installed the app just for this post.
Don't rely on software reporting.
Do you have a multimeter?
Ambient temperature plays a HUGE role when it comes to battery, even if it's 1 degree more or less.