Did anyone had a problem with compass/accelerometer calibration, as described here:
http://en.miui.com/thread-161422-1-1.html
- camera app is upside down
- compass app asks for recalibration every now and than (from one minute to few hours) - sometimes it's enough to turn the compass off and on and it asks for recalibration
- my photos are upside down
- acceleration sensor seems to only catch Z accelerations and X sometimes, but mostly X and Y are flat
I've checked and it's ACCELEROMETRS FAULT, so
- when it lays on back the Z ACC is 9.8 m/s^2 which is fine
- when it lays on front the Z ACC is -9.8 m/s^2 which is fine
- when it lays on left edge the X ACC is 2 m/s^2 which is wrong
- when it lays on right edge the X,Y,Z ACC is 0 m/s^2 which is wrong
- when it lays on top edge the X,Y,Z ACC is 0 m/s^2 which is wrong
- when it lays on bottom edge the X,Y,Z ACC is 0 m/s^2 which is wrong
I've tried clearing data and cache and also upgrading to 5.9.17 but it didn't help.
How to fix it?
I have this problem too. Tried developer rom the accelerometer problem is still exist. Then I flash china stable 6.7.11 the problem is still remain.
Is it hardware issue?
Related
Ok in the galaxy s2. If you go to settings, display, then at the bottom, you have horizontal calibration and gyro sensor calibration.
If you choose horizontal calibration you get a little test thing with the dot in the middle and it moves as you tilt the device.
When I go to gyro sensor calibration the dot just stays in the middle and does not move. Is this normal ?
Can someone try the above please
yep i tried this before, same here, but i think it's normal
If you look two different calibrations .
jje
I know, but shouldn't the dot move when you tilt the device. I thought thats what the gyro does
Do it while you are in the car (as a passenger), and see if that move when the car accelerates or slows down
Why would one calibration act the same as another .
jje
I am having the same problem the gyro calibration was working till i click on calibrate as soon as i clicked it i no longer see the ball moving :/ tried wiping and everything nothing worked.
Mine doesn't move either.
I could of sworn mine was moving last time I checked! Very strange..
I cant get mine to move either.
Maybe this might help.
http://en.wikipedia.org/wiki/Gyroscope
the gyro problem is annoying .. every app just turn into landscape mode :/
hope someone fix it fast ;/
sorrowuk said:
Ok in the galaxy s2. If you go to settings, display, then at the bottom, you have horizontal calibration and gyro sensor calibration.
If you choose horizontal calibration you get a little test thing with the dot in the middle and it moves as you tilt the device.
When I go to gyro sensor calibration the dot just stays in the middle and does not move. Is this normal ?
Can someone try the above please
Click to expand...
Click to collapse
Before I root my Samsung, can you tell me what rom you have installed or what you did last?
Thx
Morichio said:
Before I root my Samsung, can you tell me what rom you have installed or what you did last?
Thx
Click to expand...
Click to collapse
Lite'ning rom , it was working untill i clicked on calibrate after clicking it it got stuck :/ well that me i don't know about the OP.
I have the same problem (indications for gyro callibration) but also a magnetic sensor problem (see this http://forum.xda-developers.com/showthread.php?t=1111355 threat)
I used an app called sensor test / plot which shows problems with the magnetic sensor and orientation.
Anyone having the same problem?
Try an App called GPS status, it displays the output of all the GS2s sensors on one screen, including satellites, compass, gyro and accelerometer, at least you can reassure yourselves that the various sensors are actually working
erikcornelisse said:
I have the same problem (indications for gyro callibration) but also a magnetic sensor problem (see this http://forum.xda-developers.com/showthread.php?t=1111355 threat)
I used an app called sensor test / plot which shows problems with the magnetic sensor and orientation.
Anyone having the same problem?
Click to expand...
Click to collapse
All the numbers move for me using the sensor test/plot app.
in sensor test everything is working but the phone just stay in landscape mode .. thats the problem that i have.
You can try *#0*# on your dialler and then use the Sensor test and check if everything is all right.
tested on *#0*#it says its working fine as well .. :/
Recently my magnetic sensor did not work. Yesterday suddenly it came to life exept I don't trust it.
Just to check if my sensors are OK I would like to compare some data. I use *#0*# and the SENSOR
My readings are (when on table):
ACCELEROMETER Sensor Raw Data
x:-10/10 y:-20/-40 z:3030/3060
Gyroscope Sensor
Y:-0.01/-1.00 P:0.01/0.80 R:0.01/0.90
Gyro self test OK, Graph shows normal plot with rotation around all axes)
Magnetic Sensor
Magnetic: x:-45 y:-600 z:1086 (values change with orientation but stay around the same range, exept for the z value, it stays at 1086.48 contantly)
Azimuth: 176 (changes just +/-2 degr with rotation and +/- 20 degr with roll)
Pitch: 0,050 (changes normal with pitch)
Roll: 0,40 (changes normal with roll)
Little compass indicates South (red line towards you) and does not change with rotation (just +/- 20 degr with roll). It also says need for calibration and the number 0.
I know values will be different with everyone but should be around the same range. I have values (Accelerometer) in the 10 / 30 and 3000 range depending on de axis. Same with the Magnetic sensor 50 /600 and 1080 range.
As the magnetic z-axis value is stuck I expect a faulty sensor.
the test is all good to me but the image test it failed to move from landscape to normal. hope someone can help :/
Hello,
Has anyone noticed a promixity (maybe ambient light) sensor issue? Often (more in the dark) I can see a weak red light blinking right where there is the proximity sensor(it stays there if automatic brightness is on). I tried disabling and closing one app per time but it seems more like a software bug...
Anyone else?
Sony Xperia X F5121
Hello ! Yes! (sorry for my language I'm French).
Tonight, after charging my phone at 100%, I have seen a red little light in the '' capter '' a the right (for automatic luminosity I think). It was a big bug who during ~ 30 minutes. And I have lost 20% of battery, I think, cause to this bug.. Do you already have the bug today?
daddu97 said:
Hello,
Has anyone noticed a promixity (maybe ambient light) sensor issue? Often (more in the dark) I can see a weak red light blinking right where there is the proximity sensor(it stays there if automatic brightness is on). I tried disabling and closing one app per time but it seems more like a software bug...
Anyone else?
Sony Xperia X F5121
Click to expand...
Click to collapse
I've een it also sometimes but i've no idea what it is
me too,but i've noticed that only blinks when its recieveing data when changing from wifi to 4g and viceversa,when its done,it doesnt blink anymore.
Does anyone have any idea for this problem please ? :'(
daddu97 said:
Hello,
Has anyone noticed a promixity (maybe ambient light) sensor issue? Often (more in the dark) I can see a weak red light blinking right where there is the proximity sensor(it stays there if automatic brightness is on). I tried disabling and closing one app per time but it seems more like a software bug...
Anyone else?
Sony Xperia X F5121
Click to expand...
Click to collapse
@Mr High Tech @kistigun @kalel29
Are you kidding me guys? :laugh::laugh:
It's not a red light.... It's barely visible because it's an Infrared Sensor Infrared light is usually visible only in very dark conditions.
Hint that will make your day - when it's dark and you barely see it, try pointing a camera at it! It flashes white now, doesn't it.
Sebi673 said:
@Mr High Tech @kistigun @kalel29
Are you kidding me guys? :laugh::laugh:
It's not a red light.... It's barely visible because it's an Infrared Sensor Infrared light is usually visible only in very dark conditions.
Hint that will make your day - when it's dark and you barely see it, try pointing a camera at it! It flashes white now, doesn't it.
Click to expand...
Click to collapse
more than wanting to know what it is, i think they want to understand why; why does the proximity sensor stay on?
i had this question too, before updating to the latest firmware (.292). after that, it seems the "problem" doesn't occur anymore, but i'm not that sure. i'll have to double check.
however, do some of you use "Smart backlight control" feature?
carlo93 said:
more than wanting to know what it is, i think they want to understand why; why does the proximity sensor stay on?
i had this question too, before updating to the latest firmware (.292). after that, it seems the "problem" doesn't occur anymore, but i'm not that sure. i'll have to double check.
however, do some of you use "Smart backlight control" feature?
Click to expand...
Click to collapse
Smart backlight control makes use of the accelerometer of the phone. Keeps the screen on by detecting movement. Neat feature.
Smart call handling on the other hand uses the proximity sensor. Also the style cover preinstalled software. And of course Call handling uses the proximity sensor.
I'm using a modified version of Gravity Screen for pocket mode. Proximity sensor flashes all the time in order to turn the screen on and off when it's in or out of the pocket. Also I use the proximity sensor so that the screen won't turn on when it's in the pocket - like when a call comes in and I don't want to accidentally answer.
One thing you should know about the proximity sensor is that it uses a crazy low amount of power (0.18mA). Now the software that uses the sensor might have many wakelocks but we also need features so it's a small price to pay haha. Also if you're planing on using gravity screen (which is a cool app), you can always add a on/off widget.
There's really nothing to worry about - none of those features/apps I mentioned register on power consumption.
Hi,
I just bought a chinese tablet BS109 from Aliexpress, for the price the tablet is really an excellent value.
However, I have a big annoyance with it:
The G-Sensor is off by 26° on X axis (and 7° on Y axis).
However, it seems accurate (gives the same values for the same position). It's just like if the component would have been bent on the motherboard.
I don't need accuracy on the G-Sensor, but this has 2 nasty effects:
- When in landscape mode, it won't switch to portrait mode without flipping it right by at least 25°
- It's impossible to keep a portrait mode when lying on a table. (Except by locking to portrait mode). It will return to landscape mode as soon as the tablet approach the horizontal lying position.
The "recalibration" tools did not help. (GPS Status or Clinometer for instance)
There is no settings menu for this sensor.
My questions:
- How can we fix such a huge miscalibration?
- Can a calibration fix such a difference?
- Should I consider a Hardware problem? In this case, could it be that the sensor is not properly placed on the motherboard, and that we could fix it by opening the tablet?
Thanks,
Hi,
after replacing the battery of my SGS6 Edge some sensors are not working.
1. Light sensor is not working when the brightness is set to automatic
2. Gyroscope sensor is not working when screen rotates
maybe other sensors are not working properly too.
I already tried to restart the phone but there is no effect.
On the hidden service menu the the light all sensors seems to work.
The light sensor is working 100% - when I cover it, it shows "0 lux"
The Gyroscope Sensor is working too, but what does the "OIS GYRO" mean? The value on X and Y does not change.
It's my business phone with a lot of data and apps. Thats the reason why I still don't try a hard reset.
Is there a solution whithout resetting the phone?
EDIT: Gyroscope seems to work... strange. But light sensor is still not working. Brightness does not change.
i've similar issue with mine, but I don't know if battery was changed before was given to me, I tried many roms nougat and marshmallow based, but the problem persist. with automatic brightness on, if I scroll the bar, it doesn't change anithing, I've to disable the automatism
Hello! I bought a huwaei media tab 3 for a car installation. i open the device to solder a cable to the power button. after that i noticed that the device oriantion is the opposite of what the divece is actually is. For example right landscape is now left landscape. Auto rotation works it detects the change of orientation and changes modes only they are inverted. I tried factory reset still the same problem. What can i try? sure i didnt touch or break anything cause sensor works it detects movements.