I've been following the development of so-called ROMs for the Vibrant (and other SGS devices), but I have yet to see a single AOSP ROM. Even when Samsung released the original kernel sources for 2.1, there were no AOSP 2.1 ROMs. Why not? Is it because they don't know which BLOBs to pull for insertion or the proper vendor overlays?
Some developers have done great work with SGS kernels (especially supercurio and his Voodoo kernels ... eugene373's tend to always wipe the internal SD card unnecessarily ...). But, a kernel does not a ROM make ... therefore I ask, what is truly missing to build an AOSP ROM. I've gone through the sources, but I don't follow makefiles too well.
I know we have another month or so before Samsung is obligated to release their 2.2 kernel sources, but that should have no impact on 2.1 AOSP ROMs. Therefore, I ask "what is the hold up?" What is missing, and what might I contribute ...
Need 2.2 source code...
2.1 is a dead horse--why bother when 2.2/2.3 are out?
The reason to bother is to at least get AOSP running. Once its on 2.1, it'll be easier to get 2.2 AOSP running on it. But claiming 2.1 is a "dead horse" is the wrong path ... the real question still stands: after 9 months on the market their still are no AOSP ROMs.
MIUI
Now that vibrant 2.2 source is released ... we finally have a REAL AOSP port and my all time favorite from my old HD2 the MIUI.... so keep your heads up and wait for it to get finished.
Get a custom rom. There are so many good devs doing them don't waste your time on AOSP....... until they release the actual source code...... on April 22
sarim.ali said:
Now that vibrant 2.2 source is released ... we finally have a REAL AOSP port and my all time favorite from my old HD2 the MIUI.... so keep your heads up and wait for it to get finished.
Click to expand...
Click to collapse
Except, the 2.2 source for the Vibrant has not been released. The SGH-T959D that shows Froyo sources on Samsung's site is for the Canadian Fascinate, not the US T-Mobile Vibrant. Samsung has yet to release the 2.2 sources.
oka1 said:
Get a custom rom. There are so many good devs doing them don't waste your time on AOSP....... until they release the actual source code...... on April 22
Click to expand...
Click to collapse
Except the so-called "custom ROMs" are just modifications on the stock theme, a replacement kernel and a change of some of the supplied applications.
There is nothing close to a full "custom ROM" such as CyanogenMod or MIUI because we don't have Samsung's sources. What is passing for a "custom ROM" for the Vibrant are just repackaged files. It is akin to the "ROM cooking" that took place for the WinMo phones, not a truly ground-up build from source that is possible with Android.
EDT/Devs4Android has the MIUI build. From Source.
TW has a 2.2.1 in testing.
EDT has a 2.2.1 Beta released.
TW has a 2.3 AOSP in testing. From Source.
EDT has 2.2 AOSP in testing. From Source.
What you want is out there for you.
Watch the forums and reply when a call for Alpha testers is posted.
Hopefully it won't be long before you see a full TW/EDT/Devs4Android collaboration!
I think what the original poster is trying to ask (and I have the same question) is why were there never any real 2.1 AOSP, cyanogen5 for the vibrant. The source for 2.1 has been around for many months. Were some other proprietary bits missing, was the released source code such a mess that it was unbuildable, something else? With those questions in mind, why will things be any different when the 2.2 source comes out?
mattb3 said:
I think what the original poster is trying to ask (and I have the same question) is why were there never any real 2.1 AOSP, cyanogen5 for the vibrant. The source for 2.1 has been around for many months. Were some other proprietary bits missing, was the released source code such a mess that it was unbuildable, something else? With those questions in mind, why will things be any different when the 2.2 source comes out?
Click to expand...
Click to collapse
Yes, this is more towards what I was getting at. We do not have Samsung's kernel sources for 2.2. And, we do not have a Samsung provided vendor overlay.
When we receive these two pieces, then a true AOSP build will be possible. However, we do have the 2.1 kernel sources, so why wasn't a true AOSP build possible then? What was missing, and can we actually expect Samsung to release the overlay that's needed?
Actually, that's true. I know it was old but why didn't anyone build a 2.1 cyanogen or aosp rom? (Not to say its easy.)
Sent from my SGH-T959 using XDA App
A noob question, kindly can someone explain what is the vendor overlay stuff?
Many thanks!
Where have you been?
rpcameron said:
I've been following the development of so-called ROMs for the Vibrant (and other SGS devices), but I have yet to see a single AOSP ROM. Even when Samsung released the original kernel sources for 2.1, there were no AOSP 2.1 ROMs. Why not? Is it because they don't know which BLOBs to pull for insertion or the proper vendor overlays?
Some developers have done great work with SGS kernels (especially supercurio and his Voodoo kernels ... eugene373's tend to always wipe the internal SD card unnecessarily ...). But, a kernel does not a ROM make ... therefore I ask, what is truly missing to build an AOSP ROM. I've gone through the sources, but I don't follow makefiles too well.
I know we have another month or so before Samsung is obligated to release their 2.2 kernel sources, but that should have no impact on 2.1 AOSP ROMs. Therefore, I ask "what is the hold up?" What is missing, and what might I contribute ...
Click to expand...
Click to collapse
Dude theres been a true AOSP ROM for the Vibrant since like december and thats CM 6.1
Im running it now
rpcameron said:
I've been following the development of so-called ROMs for the Vibrant (and other SGS devices), but I have yet to see a single AOSP ROM. Even when Samsung released the original kernel sources for 2.1, there were no AOSP 2.1 ROMs. Why not? Is it because they don't know which BLOBs to pull for insertion or the proper vendor overlays?
Some developers have done great work with SGS kernels (especially supercurio and his Voodoo kernels ... eugene373's tend to always wipe the internal SD card unnecessarily ...). But, a kernel does not a ROM make ... therefore I ask, what is truly missing to build an AOSP ROM. I've gone through the sources, but I don't follow makefiles too well.
I know we have another month or so before Samsung is obligated to release their 2.2 kernel sources, but that should have no impact on 2.1 AOSP ROMs. Therefore, I ask "what is the hold up?" What is missing, and what might I contribute ...
Click to expand...
Click to collapse
For probably the same reason that many phones with non AOSP firmware running 1.5/1.6 did not bother with AOSP 1.5/1.6 when they were released around the time 2.1 source hit. Why bother developing at all for what is essentially an "out of date" OS.
The only people it seems who actively continue to develop for existing (as opposed to new) firmware are manufacturers and carriers. This stupidity should be left to the manufacturers who still do this.
One of the larger snags way back then (sits in his rocking chair on the porch) was a lack of understanding of the phones proprietary aspects and how to work around them. But we have a fairly clear understanding of Samsung's boot process now, and RFS can now easily be turned into a distant memory.
I would wager a guess that the apathy towards 2.1 will not repeat itself once we have 2.2 source widely available and the low level similarities between 2.2 and 2.3 should have Gingerbread being more than the experiment it currently is. It's been barely more than a week since Eugene's little present manifested and there are already proper and stable kernels available.
Keep in mind that the devs we do have, have done a phenomenal job of cleaning up, speeding up, and drastically enhancing our existing 2.2 release. And perhaps to the point where many will not really care, though I know many would still like to see CyanogenMod6/7 properly on this phone.
Master&Slave™ said:
Dude theres been a true AOSP ROM for the Vibrant since like december and thats CM 6.1
Im running it now
Click to expand...
Click to collapse
Um, that's not quite true. The CyanogenMod.com website lists 0 files available for download for either experimental or stable files. The CM6.1 you must be running is not a true CM build.
Also, CM is not AOSP, but rather AOSP with modifications.
phrozenflame said:
A noob question, kindly can someone explain what is the vendor overlay stuff?
Many thanks!
Click to expand...
Click to collapse
The vendor overlay tells the AOSP build system which proprietary files are needed from the device that are not available in source form. This includes things like GPS and video drivers, baseband firmware for wireless radios, &c.
hi everybody !
a month age i decided to compile a new rom for my Galaxy S absolutely from AOSP source ( branch 2.2.1_r1 ) after some compile-time problem and many painful steps to resolve ,eventually the rom successfully built and can boot it up flawlessly on emulator.
i create a nandroid backup of current rom and installed the compiled one. but i am facing new problem :
1- the phone successfully boots but after short while screen began
flicking several time and the phone go in deep sleep and never wakeup
( power button or menu button does not do any thing )
2- touch screen works only for some second that I can unlock the
phone
3- there is no network available
4- I have downloaded samsung opesource package for GT-I9000. it
contains a folder named 'platform' but when i merge these files to
AOSP , the compile process stops and fails again. if there any one can
help me which files from samsung source should i merge and how ? if
you now the answer and dont have spare time then some internet link or
online document is really useful .i have no problem studding and
reading and searching . reaching to target is my only hope .
I am really disappointed why there is not a good and complete step2step tutorial to compile an AOSP rom for galaxy s (GT-I9000) !!
such docs is available for phones like dell streak , desire , dream , magic , .... . i really want to to active these aspect on XDA forum and with help of all you ( mods and masters ) try to create such tutorial that any one in world can use to refer . i think XDA is the only reference on net to collect and create such help and document. please help me and leave PM or comment to agree ot disagree and from where can i start ?!! thank in advanced .
edit :
there is a google groups post that i send my question in Android-platform . if you prefer please join this group and active that post to ask any question related to 'galaxy s compile from source ' .
post located at http://groups.google.com/group/android-platform/browse_thread/thread/da5d6f18f3bd3c9b
Hello,
So my brother bough a chinese smartphone. Many chinese apps where preinstalled and I have been able to remove them, so you wouldn't notice it is a chinese device. However it would be neat if this phone would have proper AOSP.
The current ROM is almost AOSP, minor modifications have been done. This made me curious, would one be able to compile AOSP from source, and use the original kernel (if compatible)? Is a kernel extractable from a ROM to be used in another? Do you need the sources from the manufacturer in order to succesfully build AOSP?
Please note I'm not trying to do this, I'm just curious if it could be done. I have done a fair amount of research but most of the tutorials are about compiling kernels, something I DON'T want to do.
_Roysten said:
Hello,
So my brother bough a chinese smartphone. Many chinese apps where preinstalled and I have been able to remove them, so you wouldn't notice it is a chinese device. However it would be neat if this phone would have proper AOSP.
The current ROM is almost AOSP, minor modifications have been done. This made me curious, would one be able to compile AOSP from source, and use the original kernel (if compatible)? Is a kernel extractable from a ROM to be used in another? Do you need the sources from the manufacturer in order to succesfully build AOSP?
Please note I'm not trying to do this, I'm just curious if it could be done. I have done a fair amount of research but most of the tutorials are about compiling kernels, something I DON'T want to do.
Click to expand...
Click to collapse
It is definitely possible, but will take many hours of work of you want to achieve a stable daily driver state. Usually the kernel will need modifications to make it work with the AOSP ROM.
Sent from my SGH-T999 using Tapatalk 2
Say the rom uses a kernel that works with AOSP, can one build the Android OS using the already compiled kernel from the device?
I know Its pretty dumb to ask after seeing a lot of tutorial here, But I really can't understand! My Device is a huawei ascend y300. I have lots of custom rom on various forums. So I wanna built one myself! One of the developer built cm 11 from source and he is rolling out nightly on a daily basis. My interest is to build the cm11 too on my own computer based on his device specific changes he has done. and he has done a lots of changes for our device. Also if I can make any other rom from its source based of his work like mokee rom, or slimbeam etc. ANy help is appriciated. thnk you
I know it's not as simple as it looks, otherwise everybody could do it, but at least can someone point me in a vague direction?
Just out of interest, how do you upgrade a device tree to support newer Android versions? Anything in particular which might prevent Android from functioning correctly?
I've acknowledged SELinux as a problem already.
I'm new to running device trees and kernels but I do know my way around Linux (I know how toolchains works, and I can build Android and kernels, for example) and I know C++, C and Java.
I've 'Google-d' the matter, but to no avail – there appears no clear way to do it.
+1 this question
i want its answer too:good:
Hello everyone.
Im new here.
I just want to ask something.
When porting roms can my base ROM and my port ROM have different android version?
Looking forward to having responses
P/s: sorry for bad engrisk )
XdaNeko said:
Hello everyone.
Im new here.
I just want to ask something.
When porting roms can my base ROM and my port ROM have different android version?
Looking forward to having responses
P/s: sorry for bad engrisk )
Click to expand...
Click to collapse
It has been a looong time since I knew about those things but if I remember your base ROM should have that same Android version as your port ROM.
And if you want an advice, please consider building a ROM from source. Troubleshooting is hell with ported ROMs. Building ROM is scary because it has commands that you don't know yet, but it's way more easy than porting. Trust me.
Here is a guide on how to build ROM from source :
https://forum.xda-developers.com/chef-central/android/guide-android-rom-development-t2814763
@XdaNeko
It's NOT the version of Android what does matter. If that would be the case then an upgrade via OTA never would be possible.
A Stock ROM always at 100% matches phone's hardware ( CPU, GPU, RAM, storage memory, etc.pp ) - it's built by OEM's / Carrier's R&D department, the guys who know best of.
Whereas a Custom ROM necessarily does NOT because it gets built by 3rd-party companies/programmers associations - who think they can do it better, but don't always have the specific Android device at hand.