How To Deodex Your A3,A5,A7 ROMS
Things You'll Need:
1) ADB On Your PC ( http://forum.xda-developers.com/showthread.php?p=48915118#post48915118 )
2) JoelDroid Batch Deodexer (http://forum.xda-developers.com/and.../script-app-joeldroid-lollipop-batch-t2980857)
3) TWRP
4) Brain
This Is A Step By Step Tutorial :
1) First Enable Developers Options By Clicking On The Build Number 6-7 Times.
2) Turn On USB Debugging From The Developers Mode
3) Connect Your Device To Your PC
4) Go To The Directory Where You Installed Your ADB Drivers
5) Hold Right Shift And Right Click Then Click 'Open Command Window Here'
6) Then Type ' adb devices ' , You Will Be Prompted On Your Mobile Whether To Trust This PC Or Not Click OK
7) Then Type 'adb pull /system/app app/' Wait For The Process To Complete
8) Then Type 'adb pull /system/priv-app/ priv-app/' Wait For Process To Complete
9) Then Type 'adb pull /system/framework framework/' Wait For Process To Complete
10) you Will Have 3 Folder Framework , priv-app and app . Make a new folder named 'system' , then copy these folder in the 'system' folder
11) Deodex This Folder Using JoelDroid Batch Deodexer
12) Then Add This DEODEXED Folder To The .zip File Attached To The Thread
13) Copy This .zip To Your Mobile
14) Enter TWRP Recovery
15) Wipe Cache And Dalvik Cache
16) Finally Install/Flash This .zip
17) FIRST BOOT WILL TAKE TIME ABOUT 10 MINUTES
18) Wait For It To Boot
19) Done. Your ROM Is DEODEXED Now.
UPDATE:
I Have Tested This On A5 , Note 4 , S5 And Note 3 And All Of Them Work . :laugh:
fahadasad said:
How To Deodex Your A3,A5,A7 ROMS
I Am Posting A Tutorial On How To Deodex Your ROM . The Guide Will Be Understandable By Noobs :silly:
Things You Need Are :
1) ADB On Your PC ( http://forum.xda-developers.com/showthread.php?t=2588979 )
2) JoelDroid Batch Deodexer (http://forum.xda-developers.com/and.../script-app-joeldroid-lollipop-batch-t2980857)
3) TWRP ( http://forum.xda-developers.com/galaxy-alpha/help/to-port-twrp-to-galaxy-a5-a500fu-t3150843 )
4) Brain
This Is A Step By Step Tutorial :
1) First Enable Developers Options By Clicking On The Build Number 6-7 Times.
2) Turn On USB Debugging From The Developers Mode
3) Connect Your Device To Your PC
4) Go To The Directory Where You Installed Your ADB Drivers
5) Hold Right Shift And Right Click Then Click 'Open Command Window Here'
6) Then Type ' adb devices ' , You Will Be Prompted On Your Mobile Whether To Trust This PC Or Not Click OK
7) Then Type 'adb pull /system/app app/' Wait For The Process To Complete
8) Then Type 'adb pull /system/priv-app/ priv-app/' Wait For Process To Complete
9) Then Type 'adb pull /system/framework framework/' Wait For Process To Complete
10) you Will Have 3 Folder Franework , priv-app and app . Make a new folder named 'system' , then copy these folder in the 'system' folder
11) Deodex This Folder Using JoelDroid Batch Deodexer
12) Then Add This DEODEXED Folder To The .zip File Attached To The Thread
13) Copy This .zip To Your Mobile
14) Enter TWRP Recovery
15) Wipe Cache And Dalvik Cache
16) Finally Install/Flash This .zip
17) FIRST BOOT WILL TAKE TIME ABOUT 10 MINUTES
18) Wait For It To Boot
19) Done. Your ROM Is DEODEXED Now.
Click to expand...
Click to collapse
Hi can u help me.. my phone is A7 Sm-a700fd android 5.0.2 My problem is this deodexing tools is not working always invalid room when i choose my file name.. what i need to do. and i try other deodexing tools but im end up in bootloop. any idea? thank you
@mattpogi if you followed my instructions you would be left with 3 folders priv-app ,app and framework after using adb . make a new folder named 'system' copy it to your D: Drive or C: Drive Make Sure Your Directory Has No Space And Where You Have Copied The System Folder Make A Folder 'JBD' or anything else that has no space copy joeldroid's batch deodexer in it run it as administrator MAKE SURE YOU HAVE JAVA SDK And Select That 'System' Folder And click start progress . if you don't know how to install java SDK try googling it hope it helps don't forget to hit the thanks button
fahadasad said:
@mattpogi if you followed my instructions you would be left with 3 folders priv-app ,app and framework after using adb . make a new folder named 'system' copy it to your D: Drive or C: Drive Make Sure Your Directory Has No Space And Where You Have Copied The System Folder Make A Folder 'JBD' or anything else that has no space copy joeldroid's batch deodexer in it run it as administrator MAKE SURE YOU HAVE JAVA SDK And Select That 'System' Folder And click start progress . if you don't know how to install java SDK try googling it hope it helps don't forget to hit the thanks button
Click to expand...
Click to collapse
Thank you for your reply.. i downloaded all the Requirements and i follow what u have said.. i dnt have any space in my file..i make C:Myrom/system/and put the 3 file but still invalid room..should not have space..what ineed to do?
@mattpogi You Need To Select The System Folder Not 'MYROM' Maybe, That's The Problem Try it and let me know if it works .
fahadasad said:
@mattpogi You Need To Select The System Folder Not 'MYROM' Maybe, That's The Problem Try it and let me know if it works .
Click to expand...
Click to collapse
Thank you sir i select the system but still d same problem.. maybe my computer i will try to other computer..then i will let you know..thank u
mattpogi said:
Thank you sir i select the system but still d same problem.. maybe my computer i will try to other computer..then i will let you know..thank u
Click to expand...
Click to collapse
Do You Have Java Path Setup ?
fahadasad said:
@mattpogi You Need To Select The System Folder Not 'MYROM' Maybe, That's The Problem Try it and let me know if it works .
Click to expand...
Click to collapse
i try to other computer and its working i don't know y its not working with my computer... now i have 2 error encounter with the tools...its safe to continue if this the error i attached the screenshot.. thank u for ur time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or..
Thank you , fahadasad
Very appreciate for this tool. I've tried to deodex my rom A700fd lollipop 5.02
The process went fine but there are some error ,
Maps - FAILED - Oat2Dex Conversion Failed
PlusOne - FAILED - Oat2Dex Conversion Failed
SecEmail_K - FAILED - Oat2Dex Conversion Failed
GmsCore - FAILED - Oat2Dex Conversion Failed
HancomOfficeViewer - FAILED - Oat2Dex Conversion Failed
SecGallery2014 - FAILED - Oat2Dex Conversion Failed
services - FAILED - Oat2Dex Conversion Failed
Is it safe to flashed my deodexed rom with this error.
@mattpogi don't flash this rom redo the process because it's an error with systemui try to redo the process
@theerachai did you use the latest version of joeldroid ? if you didn't use it and run the joeldroid batch deodexer as admin hope this fix's the problem . And I Have A Question Did You Delete These Apps From Your Mobile Using System App Remover ?
fahadasad said:
@theerachai did you use the latest version of joeldroid ? if you didn't use it and run the joeldroid batch deodexer as admin hope this fix's the problem . And I Have A Question Did You Delete These Apps From Your Mobile Using System App Remover ?
Click to expand...
Click to collapse
yes , i'm using the lastest version.
no i didn't remove these apps
I have tried the process twice and got the same error.
theerachai said:
yes , i'm using the lastest version.
no i didn't remove these apps
I have tried the process twice and got the same error.
Click to expand...
Click to collapse
Okay Then Flash It BUT MAKE A NANDROID BACKUP FIRST Incase Something Goes Wrong . Don't Worry If The First Boot Takes a lot Of time . Don't Forget To Make A Nandroid Backup And Tell Me How it goes
fahadasad said:
@mattpogi don't flash this rom redo the process because it's an error with systemui try to redo the process
Click to expand...
Click to collapse
i make 3 times but same problem..what i need to do? im using 2.4 and 2.5 version same problem
mattpogi said:
i make 3 times but same problem..what i need to do? im using 2.4 and 2.5 version same problem
Click to expand...
Click to collapse
Go to the system folder that you deodexed then to priv-app then systemui if you see a .odex file then don't flash this , if you don't see a .odex file then flash this file . MAKE SURE TO MAKE A NANDROID BACKUP BEFORE YOU TRY TO INSTALL THE DEODEXED ROM
fahadasad said:
Do You Have Java Path Setup ?
Click to expand...
Click to collapse
yes sir.. y i cannot used my computer i have java sdk but same problem invalid room should not have space...
mattpogi said:
yes sir.. y i cannot used my computer i have java sdk but same problem invalid room should not have space...
Click to expand...
Click to collapse
i don't quite understand what you said there but do what i said before look if there is a odex file in priv-app/systemui then don't flash it
fahadasad said:
Go to the system folder that you deodexed then to priv-app then systemui if you see a .odex file then don't flash this , if you don't see a .odex file then flash this file . MAKE SURE TO MAKE A NANDROID BACKUP BEFORE YOU TRY TO INSTALL THE DEODEXED ROM
Click to expand...
Click to collapse
i already delete my file. i try in my computer still prob i cannot used the joeldroid tools same problem invalid room
mattpogi said:
i already delete my file. i try in my computer still prob i cannot used the joeldroid tools same problem invalid room
View attachment 3492691
Click to expand...
Click to collapse
Rename the folder you have Joeldroid Batch Deodexer To 'JBD' or anything without space infact
make a folder in C:/ named JBD So It's Full directory Is C:/JBD . It Will Work
fahadasad said:
Rename the folder you have Joeldroid Batch Deodexer To 'JBD' or anything without space infact
make a folder in C:/ named JBD So It's Full directory Is C:/JBD . It Will Work
Click to expand...
Click to collapse
now it works many thanks to sir..
Related
Hi friends of XDA,
this tutorial is for friends who want to develope a rom from ftf file but are not able to decrypt the system.sin file successfully or having
problems with creating a simple zip file of the rom to flash with clockworkmod. i know there are a hand full of tutorials for this but this is my version.
very complete and extremely noob friendly (i think).
I have attached this guide as text file at the end of this post(suitable for offline reading)(use it with notepad ++ for
proper format)
#include
/*
* I am not responsible for bricked devices, dead SD cards or
* thermonuclear war.
* do some research if you have any concerns.
* YOU are choosing to make these modifications.
* yes, i copied this disclaimer from FXP because it is cool and i am lazy!
*/
okay now lets get started,
This tutorial assumes that you have a copy of the ftf file of the phone for which you want to create a flashable
rom (.zip) file.
steps for extracting the system.sin and decrypting it,
1. open the appropriate ftf file with any archive extractor application (7zip recommended).
2. you will find about 11 .sin files (number of files may vary).
3. we only want the system.sin file so extract it.
4. after extracting the system.sin file (for me after extraction it was around 341 mb)(it may vary for your phone).
5. there are two ways to decrypt the system.sin file
5.1 using a simple command line program (aiup.exe)(this method is simple and one step process).
5.2 using flashtool and unyaffs tool (claimed that this always works).
5.1 using a simple command line program (aiup.exe):
5.1.1 note: many of them are reporting that this method is not working with ics system.sin files but personally it always
worked for me with both gb and ics system.sin files.
5.1.2 create a folder and put just the system.sin file inside it. it is easier to use a simple path, for eg., create a folder
"c:\system" and put system.sin in there. in my case the path for the system.sin will be "c:\system\system.sin"
5.1.3 download the attached aiup.exe program (extract it from the attached zip) and place it with the already
extracted system.sin file (in my case i extracted as "c:\system\aiup.exe")
5.1.4 open command prompt by windows+r and typing cmd and press enter.
5.1.5 type the path for the aiup.exe in the cmd window and press enter (in my case i will type as "c:\system\aiup.exe")
5.1.6 you will get the aiup window now type "system.sin 4096 c:\system\system\"
(remember the aiup.exe and system.sin should be in the same folder)
5.1.7 the above step explained:
system.sin - we are typing system.sin in the aiup command window because we want to decrypt the system.sin, for
this to work the system.sin file and aiup.exe has to be present in the same folder. if system.sin file is
present somewhere else then in aiup.exe command window instead of typing system.sin you have to
replace it with the path to system.sin file.
4096 - it defines the page size of the system.sin file where it can be anything from 2048, 4096 or 8192
(if you get a page file parameter wrong error then try with another page file size as described above).
c:\system\system\ - it defines where the files has to be extracted it can be anywhere according to your
convinience.
if it is working then you will be having a blinking cursor in the aiup command window.
wait for some time as the system.sin file is being extracted. after extraction it will say done.
now go to the extracted folder which you defined above (in my case it is "c:\system\system\") and check whether
system.sin file is extracted to a seperate "system" folder.
5.1.8 if you find nothing there or a empty folder the try the step 5.1.6 with another page file size. if all page
file sizes fail with empty folder or with page file parameter error then you will have to use the alternative
method to decrypt and extract system.sin file (see 5.2)
5.1.9 upon succesful extraction of system.sin file using aiup.exe jump to step 6.
5.2 (alternative method) creating a system dump using flashtool and extracting the dump using unyaffs tool:
note: if aiup.exe method fails then we have to use flashtool and unyaffs to decrypt and extract the system.sin
file which is supossed to be always succesful unlike the aiup.exe method.
5.2.1 download latest flashtool from here and download unyaffs from here (if the links are broken search the forum)
5.2.2 now follow steps from 1 to 4 and and 5.1.2 (extract system.sin from ftf file)
5.2.3 open flashtool and click advanced>SIN editor.
5.2.4 sin editor window gets opened, type the path to the extracted system.sin fie in appropriate box
(in my case "C:\system\system.sin")
5.2.5 now click "dump data" in the sin editor window.
5.2.6 wait for it to dump the system.sin file data.
5.2.7 After completion of the process (check the flashtool log window) you will get two files created in the folder
(in my case "C:\system\") one will be "system.partinfo" and other will be "system.yaffs2"
5.2.8 now unyaffs tool has to be used on the system.yaffs2 file. download unyaffs tool and extract the files where the
system.yaffs2 file is present (in my case "c:\system\")
5.2.9 after extracting the two files in the unyaffs archive, the folder ("c:\system\") should contain the below files
cygwin1.dll
system.yaffs2
system.partinfo (not actually requiered)
unyaffs.exe
5.2.10 open command prompt (step 5.1.4)
5.2.11 type the following command "path_to_unyaffs_program\unyaffs.exe system.yaffs2"
(in my case "c:\system\unyaffs.exe system.yaffs2") and press enter.
5.2.12 wait for some time untill the process gets completed then you will find the extracted system files
in the appropriate folder (in my case "c:\system\")
5.2.13 now create two folders, parent and child (folder inside folder) . name the main folder (parent folder) as whatever you want
(in my case "working_folder") and the folder inside it (child folder) SHOULD BE COMPULSORY NAMED as "system" (all lower case letters).
5.2.14 now select all the extracted folders and files which were extracted by the unyaffs tool
(in mycase they are present in "c:\system\") and exclude "cygwin1.dll" "system.yaffs2"
"system.partinfo" "unyaffs.exe" (exclude all the files and folders which were not exracted by the unyaffs tool)
and move all the files and folders extracted by the unyaffs tool to the "system" folder created in step 5.2.13
Now as the system folder has been created from the system.sin let us shift our focus to "META-INF" folder.
6. here you will need to use a custom rom specific for your device (i recommend using the rom claimed to be popular for your
device).
7. after downloading the custom rom (.zip file) open the rom (.zip file) and extract ONLY the "META-INF" folder from the rom.
8. move the extracted "META-INF" folder to the "working_folder" created in step 5.2.13
9. now the "working_folder" should contain only the following two folders in it
system (collection of files and folders extracted by unyaffs tool as explained before)
META-INF (extracted from custom rom (step 6 - 8))
Creating flashable zip:
note: I strongly recommend going through the updater-script (using a text editor) (notepad++ recommended) present in
"META-INF\com\google\android" before creating the flashable zip because it may contain missing file permissions and/or
unwanted junk code for files which are not present in your rom because it was not created for your rom it was created
for the custom rom (remember extracting the META-INF folder from the custom rom?). the updater-script and the
update- binary has to be from the same rom as different updater-script and update-binary may throw errors in clockworkmod.
10. now select both the "system" and "META-INF" folder inside the "working_folder" and use 7zip (recommended) or winrar
to create a .zip archive and set the compression mode to STORE (very important).
11. The above created .zip can be readily used with clockworkmod for flashing the rom or with android kitchen by dsixda for
rooting the rom and modding etc.,
HAPPY FLASHING!
CREDITS:
authors of flashtool
authors of aiup.exe
authors of unyaffs tool and adridu52 for uploading it
dsixda for his awesome noob friendly kitchen!
FXP for the disclaimer!
(please pm me if i have missed you out!)
please post your comments and questions below..........
PRESS THANKS IF I HAVE HELPED YOU!
Nice tut my friend... Tha second method works I can confirm dat!! When I use tha first method den, it didn't work so I search for another method & I got tha second method & it works fine!!!
To save stress of typing path, goto tha folder created where aIUP.exe is present, hold shift key & right on blank area, yhu will see command prompt, click on it to open command prompt having tha folder path already!!! Guys if dis method works for yhu dnt hesitate to press thanks for OP.....
whalesplaho said:
Nice tut my friend... Tha second method works I can confirm dat!! When I use tha first method den, it didn't work so I search for another method & I got tha second method & it works fine!!!
To save stress of typing path, goto tha folder created where aIUP.exe is present, hold shift key & right on blank area, yhu will see command prompt, click on it to open command prompt having tha folder path already!!! Guys if dis method works for yhu dnt hesitate to press thanks for OP.....
Click to expand...
Click to collapse
thanks whalesplaho!
and about the right click cmd thing, it doesn't work with win xp so i mentioned a universal method to open the command prompt
gouthamthemostwanted said:
thanks whalesplaho!
and about the right click cmd thing, it doesn't work with win xp so i mentioned a universal method to open the command prompt
Click to expand...
Click to collapse
My pleasure buddy... Oooooooopsssss, didn't know dat!
gouthamthemostwanted said:
thanks whalesplaho!
and about the right click cmd thing, it doesn't work with win xp so i mentioned a universal method to open the command prompt
Click to expand...
Click to collapse
very nice tut..
.
some screenshots will make it much more better.
sandy7 said:
very nice tut..
.
some screenshots will make it much more better.
Click to expand...
Click to collapse
Or maybe video tutorial will be good
Sent from my Nokia 3310 using Tapatalk 2
right now i'm not havin my pc once i get it to work, i'll update my post with screen shots!
chepoz said:
Or maybe video tutorial will be good
Sent from my Nokia 3310 using Tapatalk 2
Click to expand...
Click to collapse
u will get video tut in this thread..http://forum.xda-developers.com/showthread.php?t=1661770
gouthamthemostwanted said:
right now i'm not havin my pc once i get it to work, i'll update my post with screen shots!
Click to expand...
Click to collapse
better, that will make tha tut more noob-friendly!!!
Good work bro
Sent from my MANGO using Tapatalk 2
bandarigoda123 said:
Good work bro
Sent from my MANGO using Tapatalk 2
Click to expand...
Click to collapse
Thanks friend
hit thanks if I've helped!
sent from my smultron
Help
pitchblack5691 said:
Thanks friend
hit thanks if I've helped!
sent from my smultron
Click to expand...
Click to collapse
I made a rom using system folder and it is flashable..
The problem is when i boot my rom doesn't detects my sim card...
When i see closely in my ftf i see boot folder and boot_delivery.xml
i suspect the reason is somewhere behind this...
Do you have any idea..
Its a new ftf for sony xperia M C1905
Here is a screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is my unlocked bootloader lose if i flash with this flashable zip?.
Sent from my Xperia Mini Pro using Tapatalk
Flashtool-No "Dump data" menu
Hello,
I'm using the latest Flashtool (0.9.18.5) and Sin Editor has no "Dump data" item.
The items are: "dump header", "Dump raw", "Extract data", "Advanced" (see attached picture)
I've tried all of them and was not able to generate any yaffs2 file.
Any idea ?
Thanks
This is a pre-rooted JB for Xperia P Only !!
How to get a rooted JB For XP, well follow this:
please press thanks for uploading the rooted FTF for pandemics here :- http://forum.xda-developers.com/showpost.php?p=40822979&postcount=223
1: Flash back to ICS with flashtool
2: Download this ftf file: [rom]Sony Xperia P_6.1.1.B.1.75_Generic World
3: Put the ftf file inside the firmware folder of flashtool
4: Turn Usb Debugging on inside your phone
5: Shut down your Xperia P
6: Press the lightning icon inside flashtool
7: press FLASHMODE 'NOT FASTBOOT"
8: Choose the 75 ftf file for XP
9: Tick or untick nothing, stands all good
10: reboot your device, you are back on ICS
Root now the ICS, Follow this:
[ROOT][Including .54 and .75 update]
Install CWM:
[CWM][ICS]CWM Recovery 6.0.1.2 for Locked Bootloader
Well now install the pre-Rooted JB
Download this JB Kernel zip:
http://d-h.st/oBB
and this Pre-rooted JB zip rom:
http://d-h.st/aze
and put it on your SD card
Well Now shut down you Xperia P
Turn it on
Enter CWM Recovery by pressing volume down
Mount System
Mount Data
Mount Cache
Till you see its all unmounted
Flash the JB Kernel Zip
Again
Mount System
Mount Data
Mount Cache
Till you see its all unmounted for sure, otherwise you get aborted
Flash the JB_prerooted_6.2.A.0.400.zip
Do Not Reboot !!
Wipe Data/Factory Reset
Reboot !!
It take some minutes, But just wait with patience
For the 1st time you may get FC from Thememanager and Timescape
No worries, its gone and all works good
Enjoy Rooted JB !!!
Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Guide By Pandemic
credits :-
Pandemic for writing this awesome guide
OLD INSTRUCTIONS
ROM LINK:-
JB pre-rooted TW firmware 6.2.A.0.400 (confirmed working)
JB pre-rooted Generic firmware 6.2.A.0.400(confirmed working fine thanks to [url=http://forum.xda-developers.com/member.php?u=2902434]Pandemic) [/URL]
GREAT thanks to s4tch
1.Go to CWM recovery
2.mount data,system and cache
3.flash jb kernel(see attachment)
4.mount data,system and cache again if not mounted
5.flash the JB_prerooted_6.2.A.0.400.zip
6.wipe data and reboot
TUTORIAL FOR MAKING FLASHABLE ZIP
First of all download any JB firmware FTF .
You will need the follows tools for making flashable zip
1.flash tool from binary4
2.usb cable
3.winrar software (which i recommend )
4.superuser.zip
5.ext4 unpacker
steps:-
1.Now open JB firmware FTF with winrar software
see image
2. right click system.sin and extract it
see image
3.open flash tool and go to tools ---sin editor ---open system.sin---dumb data and you will get two files system.ext4 (important) and system partition.bla(this one not needed)
see image
4.open ext4 unpacker and browse system.ext4 ----extract it
see image
5.now download superuser.zip from attachment and extract it (don't ask me how to).
6.copy bin/su and app/superuser.apk to system/bin and system/app of JB firmware respectively ,which you extracted in step 4.
7.download JB.zip from attachment and open with winrar
8.browse through system folder of it and drag and drop files it JB.zip (JB.zip should be opened in winrar)
see images
9.now you are done with system files
10.flash it with CWM recovery
11.turn off the device
12.now kernel part,open flash tool
13.select flash mode
14.select JB firmware FTF u have and exclude system,baseband ,fota and partition(tick these four)
see image
15.click ok
16.press volume down key and connect the usb(which should be connected to PC) to device
18.done and now reboot
19.wait for it will take a long time
I dont get it.. there is no CWM recovery so how can we flash the file ? Also we just change the files of the system on the PC, not in phone
DavidMKD said:
I dont get it.. there is no CWM recovery so how can we flash the file ? Also we just change the files of the system on the PC, not in phone
Click to expand...
Click to collapse
See the requirements
U should be on ics ,rooted and cwm installed.
Also we just change the files of the system on the PC, not in phone
What u saying
Sent from my LT22i using Tapatalk 2
percy_g2 said:
See the requirements
U should be on ics ,rooted and cwm installed.
Also we just change the files of the system on the PC, not in phone
What u saying
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
Maybe I cant understand... Its not clearly explained
DavidMKD said:
Maybe I cant understand... Its not clearly explained
Click to expand...
Click to collapse
steps are clear ,u should know how to use sin editor in flashtool .
there is a link in 1st post check that
it's a tedious process, any other simple method like the one for .54 and .75
Aravinth_sm said:
it's a tedious process, any other simple method like the one for .54 and .75
Click to expand...
Click to collapse
wait for devs to come in and do it in short way
From common sense, its logical that a rooted rom will obviously work So if anyone still has doubts, go through with it and have no worries It will work just fine
[ps : This is the same method I described so dont get confused ]
I already got it, you need to make a flashable CWM update.zip archive.
This is problem I have very few free space on SDcard.
Would it B so hard if anybody made pre-rooted ftf file for locked BL?
bflmpsvz said:
I already got it, you need to make a flashable CWM update.zip archive.
This is problem I have very few free space on SDcard.
Would it B so hard if anybody made pre-rooted ftf file for locked BL?
Click to expand...
Click to collapse
the problem is my data connection,otherwise i would have uploaded flashable zip for LB
btw can anyone provide me updater script of stock ICS rom?
I'm at step 12, but noob question is coming: where should I place kernel.elf in the flashable zip?
Now I have the following folders in my zip:
\META-INF
\system
...and all the files from step 8 in the system folder.
s4tch said:
I'm at step 12, but noob question is coming: where should I place kernel.elf in the flashable zip?
Now I have the following folders in my zip:
\META-INF
\system
...and all the files from step 8 in the system folder.
Click to expand...
Click to collapse
place it in the root of the zip
give me your updater script i will modify it and give it to you or give me the zip without system folder in it ?
percy_g2 said:
place it in the root of the zip
give me your updater script i will modify it and give it to you or give me the zip without system folder in it ?
Click to expand...
Click to collapse
i send you the updater script.
percy_g2 said:
place it in the root of the zip
give me your updater script i will modify it and give it to you or give me the zip without system folder in it ?
Click to expand...
Click to collapse
OK, I'll do that. I attached the updater.script.
s4tch said:
OK, I'll do that. I attached the updater.script.
Click to expand...
Click to collapse
pandemic and s4tch try with this updater script
put kernel.elf in root of zip
zip should be like this
\META-INF
\system
\kernel.elf
percy_g2 said:
pandemic and s4tch try with this updater script
put kernel.elf in root of zip
zip should be like this
\META-INF
\system
\kernel.elf
Click to expand...
Click to collapse
what? i dont understand you, just folders and als a folder called root?
Pandemic said:
what? i dont understand you, just folders and als a folder called root?
Click to expand...
Click to collapse
root of the folder means in zip not in any folder/directory
replace the updater script with mine which i gave in above post
make a flashable zip
which will look like
\META-INF\com\google\android:- replace my updater script here
\system:- super user app as i mentioned in my steps in 1st post
\kernel.elf :- kernel.elf here
^Thanks! Flasingh back ICS now, I'll report results in 30-40 minutes.
percy_g2 said:
root of the folder means in zip not in any folder/directory
replace the updater script with mine which i gave in above post
make a flashable zip
which will look like
\META-INF\com\google\android:- replace my updater script here
\system:- super user app as i mentioned in my steps in 1st post
\kernel.elf :- kernel.elf here
Click to expand...
Click to collapse
sorry man i dont get you !
your english is bad, a zip need folder you know map/folders
how must i all them?
be clear please
s4tch said:
^Thanks! Flasingh back ICS now, I'll report results in 30-40 minutes.
Click to expand...
Click to collapse
great waiting :good:
While flashing a rom, sometimes we get a "status 7 error". This Guide helps you to get out from it, and flash your favourite rom. Let's get started.
Move to META_INF > COM > GOOGLE > ANDROID by extracting the rom.
Here you will find a file "updater-script". Rename this file as updater-script.doc (microsoft word format) or use notepad++ (preferably)
(in some pc, extensions are nor visible. to make them visible, follow these steps)
Open Folder Options by clicking the Start button , clicking Control Panel, clicking Appearance and Personalization, and then clicking
Folder Options.
Click the View tab, and then, under Advanced settings, do one of the following:
To display file extensions, clear the Hide extensions for known file types check box, and then click OK.
Double click to open it( microsoft word preferred)
delete text, starting from "assert ....... till the semicolon ( of the last getprop command).
(See the image in the attached file for carefully deleting the lines. Click this link.)
Save the file now.
Again rename the file, and delete the .doc extention
Now go back and zip these files again. and you will get a zipped rom.
And the status 7 error has now been removed!
---
Siddharth121 said:
hey!
while flashing roms, many times we get a "status 7 error". while searching in many threads, we do not get how to resolve it. i will tell you each and every thing step by step
so i made a NOOB FRIENDLY WAY TO RESOLVE STATUS 7 ERROR
make sure that the rom you have downloaded matches your phone model, if you flashed some other rom, you may hard brick your device.
1. First extract your rom (for example using 7-zip)
2. Go to the folder META_INF > COM > GOOGLE > ANDROID
3. Here you will find a file "updater-script"
4. Rename this file as updater-script.doc (microsoft word format)
(in some pc, extensions are nor visible. to make them visible, follow these steps)
Open Folder Options by clicking the Start button , clicking Control Panel, clicking Appearance and Personalization, and then clicking
Folder Options.
Click the View tab, and then, under Advanced settings, do one of the following:
To display file extensions, clear the Hide extensions for known file types check box, and then click OK.
5. Double click to open it( microsoft word preferred)
6. delete text, starting from "assert ....... till the semicolon( of the last getprop command. (see image in attached file-lines to delete)
7. Now save the file
8. Again rename the file, and delete the .doc extention
9. now go back to the main rom folder where you extracted the 3 files. zip these files again. and you will get a zipped rom.
and the status 7 error has now been removed!:good:
happy flashing :victory::victory:
at last, as you read in every post, i am not responsible for any bricked device.
Click to expand...
Click to collapse
have you already try to cook rom using android kitchen?
I saw android kitchen. But it didn't supported my p3100. Ive rooted my htc day before yesterday. I'll try that surely :thumbup:
But why?..
Sent from my HTC One X+ using xda premium
Siddharth121 said:
I saw android kitchen. But it didn't supported my p3100. Ive rooted my htc day before yesterday. I'll try that surely :thumbup:
But why?..
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
because every time i use that to cook rom for my samsung galaxy gio the installation is aborted and error status 7 when i am flashing it
Do the above mentioned, actually the recovery checjs for the device version and all before flashing.
Sent from my HTC One X+ using xda premium
Siddharth121 said:
Do the above mentioned, actually the recovery checjs for the device version and all before flashing.
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
yeah maybe that is the main problem dude it is really hard to work with kitchen
Yepp. It is, but it reduces your harwork.
Sent from my HTC One X+ using xda premium
Siddharth121 said:
Yepp. It is, but it reduces your harwork.
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
maybe in deodexing a stock rom should the first one that really helps
flash the zip ,go to advanced option "show logs"
delete the lines which shows error like no file or directory in updater script
simple way
percy_g2 said:
flash the zip ,go to advanced option "show logs"
delete the lines which shows error like no file or directory in updater script
simple way
Click to expand...
Click to collapse
is that method is tested and proven?
badagila said:
is that method is tested and proven?
Click to expand...
Click to collapse
Yeah
Sent from my LT22i using Tapatalk 2
percy_g2 said:
Yeah
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
have you try to cook rom using dsixda kitchen?
so the advice is to remove the device check?
How about a tip on how to use the proper device id or name?
So where do I look in the device to use the name that works?
That would be better imho.
I did try to use the values in the build.prop file from the running device, but that did not work eiter.
Now i'm getting status 4 error
i was getting status 7 error. Searched the forum and found this thread. I followed the directions to take off the lines from updated script files, but now i'm getting status 4 update. Can anyone recommend me how i can take care of status 4 error?
I can't flash any custom rom from recovery. Please help.
nulfinis said:
Hi,
I still get status 7 after using this guide.
any advice?
Click to expand...
Click to collapse
My Android Solutions
[27] Problem:- ClockworkMod Recovery giving Status 7 error "Installation aborted".
Solution:- One or some of the prerequisite requirement for the needed upgrade is missing or corrupted . So you may need to identify and replace that requirement for the installation to continue. Most likely could be due to wrong bootloader, wrong CWM, Wrong IMEI, Wrong Radio etc
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Error 7
xsenman said:
My Android Solutions
[27] Problem:- ClockworkMod Recovery giving Status 7 error "Installation aborted".
Solution:- One or some of the prerequisite requirement for the needed upgrade is missing or corrupted . So you may need to identify and replace that requirement for the installation to continue. Most likely could be due to wrong bootloader, wrong CWM, Wrong IMEI, Wrong Radio etc
I have had Error 7 due to delete many apps and unnecessary files in the rom. I resolved my problem flashing again the rom (previous rom) that I was removing apps and files. Then, I flash the new rom and problem resolved. Regards.
P.D. I have FXP238 CM10 installed and running ok.
Click to expand...
Click to collapse
Siddharth121 said:
1. First extract your rom (for example using 7-zip)
2. Go to the folder META_INF > COM > GOOGLE > ANDROID
3. Here you will find a file "updater-script"
4. Rename this file as updater-script.doc (microsoft word format)
(in some pc, extensions are nor visible. to make them visible, follow these steps)
Open Folder Options by clicking the Start button , clicking Control Panel, clicking Appearance and Personalization, and then clicking
Folder Options.
Click the View tab, and then, under Advanced settings, do one of the following:
To display file extensions, clear the Hide extensions for known file types check box, and then click OK.
5. Double click to open it( microsoft word preferred)
6. delete text, starting from "assert ....... till the semicolon( of the last getprop command. (see image in attached file-lines to delete)
7. Now save the file
8. Again rename the file, and delete the .doc extention
9. now go back to the main rom folder where you extracted the 3 files. zip these files again. and you will get a zipped rom.
Click to expand...
Click to collapse
hi, i follow all the instruction, but im still getting error, this time its "status 6"
wrong thread lol
thx for good work
Hello,
I need some professionals to help me to fix this problem ! (if it is possible ).
I red (like a lot of persons) this marvelous post : 'http://www.xda-developers.com/android/sony-ps4-remote-play-ported/'.
And i decided to do it !
Well,I saw that it need a CWM Recovery on my phone but to do it i must have a bootloader unlocked !
But, with my Xperia Z2 (Android 4.4.2) when i enter to the dialer *#*#7378423#*#* to access the service menu.
It show me that my device cannot be unlocked.
What i must understand ? Remote ps4 isn't for me ?
Thank you very much to answer me.
(and sorry for my english)
No need to unlock bootloader!!!
All you need is root
Instructions how to root are here:http://forum.xda-developers.com/showthread.php?t=2784900
After you rooted you can install recovery
Then follow http://www.xda-developers.com/android/sony-ps4-remote-play-ported to get PS4 remote going
Solution with common sense[Bootloader LOCKED]
Chino_953 said:
Hello,
I need some professionals to help me to fix this problem ! (if it is possible ).
I red (like a lot of persons) this marvelous post : 'http://www.xda-developers.com/android/sony-ps4-remote-play-ported/'.
And i decided to do it !
Well,I saw that it need a CWM Recovery on my phone but to do it i must have a bootloader unlocked !
But, with my Xperia Z2 (Android 4.4.2) when i enter to the dialer *#*#7378423#*#* to access the service menu.
It show me that my device cannot be unlocked.
What i must understand ? Remote ps4 isn't for me ?
Thank you very much to answer me.
(and sorry for my english)
Click to expand...
Click to collapse
Firstly make sure your phone is ROOTED(Bootloader LOCKED).
Download the attached files from this thread
Unzip and copy "PS4 Remote Play Port by Xperia PlayStation FOR ALL DEVICES (4.0+)" to your SDcard or phone memory.
Use a root explorer or enable root mode in ES Explorer and copy "system" files to the required folders(which will need to overwrite the old files)
Set permissions to "rw- r-- r--"
install the Playstation.apk and Voila we all waiting for Sony to release the Z3 so that we can use the app to the full potential...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hit the THANKS button if you find my post helpful:good:
Thanks a lot !
It must be only rooted ! Cool !
I will try your process.
:good:
And i will tell you the result !
:fingers-crossed:
jenge said:
Firstly make sure your phone is ROOTED(Bootloader LOCKED).
Download the attached files from this thread
Unzip and copy "PS4 Remote Play Port by Xperia PlayStation FOR ALL DEVICES (4.0+)" to your SDcard or phone memory.
Use a root explorer or enable root mode in ES Explorer and copy "system" files to the required folders(which will need to overwrite the old files)
Set permissions to "rw- r-- r--"
install the Playstation.apk and Voila we all waiting for Sony to release the Z3 so that we can use the app to the full potential...
Hit the THANKS button if you find my post helpful:good:
Click to expand...
Click to collapse
Hello !
Well, I followed your advices, my device is rooted now but after the unzip and copy of "PS4 Remote Play Port by Xperia PlayStation FOR ALL DEVICES (4.0+)" to my phone memory, i can't paste the "system" files to the required folders("system at the root").
When i paste, a message tell me "Copy operation failed".
I use the application "Root file explorer" to do it.
Do you have another method ? Did i wrong ?
Thank you...
Chino_953 said:
Hello !
Well, I followed your advices, my device is rooted now but after the unzip and copy of "PS4 Remote Play Port by Xperia PlayStation FOR ALL DEVICES (4.0+)" to my phone memory, i can't paste the "system" files to the required folders("system at the root").
When i paste, a message tell me "Copy operation failed".
I use the application "Root file explorer" to do it.
Do you have another method ? Did i wrong ?
Thank you...
Click to expand...
Click to collapse
Check under settings with root Explorer if System is writable. Otherwise just use ES Explorer and activate root mode.
Hit the THANKS button if you find my post helpful :good
jenge said:
Check under settings with root Explorer if System is writable. Otherwise just use ES Explorer and activate root mode.
Hit the THANKS button if you find my post helpful :good
Click to expand...
Click to collapse
Thank you but with ES Explorer (with root mode activated) i can't copy/paste to the system folder ! (operation failed) furthermore i can't change the setting with all writable too (like a chmod 7-7-7) to do it !
Damn ! Maybe my phone isn't well rooted !
I'm confused...
Chino_953 said:
Thank you but with ES Explorer (with root mode activated) i can't copy/paste to the system folder ! (operation failed) furthermore i can't change the setting with all writable too (like a chmod 7-7-7) to do it !
Damn ! Maybe my phone isn't well rooted !
I'm confused...
Click to expand...
Click to collapse
What SU manager are you using?
Install this recovery
Install dualrecovery by [NUT]
Download Z??-lockeddualrecovery2.7.XXX-BETA.installer.zip from http://nut.xperia-files.com/, run install.bat and select Option #2
And flash the zip from your SD card by pressing Volume down while your phone is booting
Hit the THANKS button if you find my post helpful :good
jenge said:
What SU manager are you using?
Install this recovery
Install dualrecovery by [NUT]
Download Z??-lockeddualrecovery2.7.XXX-BETA.installer.zip from http://nut.xperia-files.com/, run install.bat and select Option #2
And flash the zip from your SD card by pressing Volume down while your phone is booting
Hit the THANKS button if you find my post helpful :good
Click to expand...
Click to collapse
Thank you another time !
I've understood the beginning but when you say "And flash the zip from your SD card by pressing Volume down while your phone is booting"
You talk about what zip ? and i flash by the recovery or with my PC ?
(I'm sorry about my NOOB behaviour)
Wic
OK, OK, i'm progressing !
I make a recap :
Actually :
* my phone is rooted
* I installed "lockeddualrecovery" (but i don't use it, only Reboot-> power off)
* I modified the permissions (like 777) of the folder System (at the root of the phone) - with ES Explorer
* I copy/paste thes files from "etc" and "framework" (in my SD) to "etc" and "framework" in the system folder at the root with ES Explorer (and it's ok now ! thank you)
* I restart my phone
° I install the playstation app normally (by google play)
But when i run the App i don't see the new fonctionnality !!!
With what i'm wrong ?
New real recap :
1 * my phone is rooted
2 * I installed "lockeddualrecovery"
3 * I modified the permissions (like 777) of the folder System (at the root of the phone) - with ES Explorer
4 * I copy/paste thes files from "etc" and "framework" (in my SD) to "etc" and "framework" in the system folder at the root with ES Explorer (and it's ok now ! thank you)
* I restart my phone and Wipe Cache and Dalvik Cache (by
* I reboot by lockeddualrecovery -> power off
° I install the playstation app normally (by google play)
And nothing ! Am i dumb ? i failed something ?
Can you help me please !?
Dawn, sorry but in real i uderstood all badly... howewer :
NEW method, (but NEW problem !!!)
* Phone : Xperia Z2 rooted
* Z2lockeddualrecovery installed
* I download the "PS4..." zip and the apk files
* I flash the zip by the recovery
* I wipe cache, dalvik cache
* I reboot system
But when i want to run the apps (apk file download) it's ays there's a probem about package ...
(i did it another time with flash with zip verified signature, and the recovery told me about a problem with the zip)
Can you help me please ?
IMP NOTE : Use " python-2.7.xx" ,latest version otherwise extractor will led to undesired output like this one https://forum.xda-developers.com/showpost.php?p=72165633&postcount=295 and extractor supports android 7.1.2(updated on 18-May-2017)
Extractor of system.new.dat of Marshmallow and Lollipop ROM's
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
OLD
Extractor 1.0
or
Mirror
Extractor 2.0
Extractor 3.0
UPDATED
Extractor 4.8 (Updated on 18-May)
SOURCE
$GIT-HUB Contribute!
Changelog -> https://github.com/matriex/System_Extractor-WIN/commit/4b94cde74f63f6f1ff21b8c745b306326b15cb5a
Alternative of repack, if the repack script doesn't works with your system folder then try this script SCRIPT / GUIDE
How to
Extract ext4-Image files
Download Imgextractor.exe binary from the link
https://github.com/matriex/System_Extractor-WIN/blob/master/bin/Imgextractor.exe
1. Create a folder named ext and copy the binary to ext folder
2. Copy your image file ,say "system_1.img" to ext folder
3. Select the ext folder , hold the shift (right) click RMB
4. Select "Open command window here"
5. Then type this command on CMD
Code:
Imgextractor.exe system_1.img -i
6. The files will be in "system_" named folder.
NOTE:You should rename IMG file to system_1.img before doing anything
Extract *.DAT files
Users, The extractor works with nought 7.0.0 and 7.1.1 perfectly (tested with CM14.1-2016-12-12 & aosp_7.0_2016-09-19), If you encounter errors then please install python and then try extracting again
Method I
Download and run the extractor .
METHOD II (command line)
Use python 2.7.xx
1. Download zip and extract sdat2img.py binary from the link
https://github.com/xpirt/sdat2img/archive/master.zip
2. Create a folder "ext"
3. copy "sdat2img.py", "system.transfer.list" and "system.new.dat" to ext folder
4. Open cmd on "ext", (by selecting and holding shift , you will find "Open command window here")
5.Type this on command window
Code:
python sdat2img.py system.transfer.list system.new.dat system.img
6. After that you'll find system.img on that folder, that image file is ext4 image file and can be extracted by this guide
http://forum.xda-developers.com/showthread.php?t=2285831
END OF SUPPORT I DON'T HAVE ANY METHODS LEFT AND PLESE ASK PROBLEMS RELEATED TO ANDROID 6.0 ONLY
Repack *.DAT
/*Repack will or will not work, Don't panic if it not worked, You can still use folder =) */
For flashing xyz_ROM.zip with dat files , you need to modify updater-script
Script, "of some roms" , b'coz some roms contains a link b/w updateR-script
and system.transfer.list. The link includes following : There is a line in
updateR-script script called
Code:
if range_sha1("/dev/block/platform/msm_sdcc.1/by-name/system", "36,0,32770,......,307199") == "0b20303394271424267e36a0ce7573f1b62ddc0d" then
if you found this in
updateR-script then from here follow the guide Repack_INFO.txt otherwise
directly copy system.new.dat and system.transfer.list to ROM folder and
repack/zip it and flash it.
Repack ,select from script, then choose manually (option 1)
Copy all your ROM files/subfolders(bin ,app ,build.prop etc) to system folder
Everything is expalined in extractor, read it carefully
If you found "range_sah1()" on your updateR-script then continue below, else only you have to replace system.new.dat and system.transfer.list of "xyz_ROM"
CONTINUE ONLY IF YOU FOUND RANGE RANGE_SHA1
After repack a SHA1_VALUE of system.new.dat is generated and file is created as "SHA1_VALUE.txt" with "system.new.dat" & "system.transfer.list"
And follow this guide Repack_INFO.txt (attached end of this POST)
OR GIT ATTACHEDhttps://github.com/matriex/System_Extractor/blob/master/Repack_INFO.md
That's all if you need help feel free to comment
Thanks for using this method I can't say it will work , but what's wrong in trying , I tried 10 to 20 times to make it work
A LITTLE ADVICE
1. If the script failed to work ,please take a look at this post again I'm sure I've posted enough resource which will help you out in extracting and repacking .DAT files .
2. Please keep this thread clean.
3. Please don't quote whole thread(use tags).
4. I take no responsibility of repacking system.img!
5. For Linux users :https://github.com/matriex/System_Extractor-Linux/blob/master/README.md
6. Use Python 2.7.x or otherwise extractor will not work Do not use python 3.0 or update sdat2img.py binary!
Thanks to @xpirt for sdt2img
Repack_INFO.txt (GIT-HUB, clear view)
Any possible way to put it back?
? if possible Or why don't you flash it directly by folder
matrixex said:
Wait comming soon if possible
Or why don't you flash it directly by making some changes in updater-script
Click to expand...
Click to collapse
I am in no dire need of it right away, I am just asking for any future need.
nicesoni_ash said:
I am in no dire need of it right away, I am just asking for any future need.
Click to expand...
Click to collapse
Hi
I have successfully created repack script for system to dat , download it and reply worked or not
Deleted
Deleted
Works well on new Nutella OTA images. Thx
tweakradje said:
Works well on new Nutella OTA images. Thx
Click to expand...
Click to collapse
Cool please give me the link to android N OTA
Sure. Here you go http://developer.android.com/preview/download-ota.html
Cheers
tools not working broo
Source
Tools not working bro
Thanks. Tested and it worked.
v3ndul said:
Tools not working bro
Click to expand...
Click to collapse
Impossible i have tried it with marshmallow and Lollipop system.new.dat files several times(truly 4-5 ROMS more than 10times) it worked without any issues please be sure that you have copied your files as stated and also match the names as stated in extractor.
Don't copy whole post just use HIDE
v3 doesnt work. when I open it (with admin rights) I see the copyright and warnings then it closes and opens a new windows. it does that again and again sort of like a loop
Abaddon said:
v3 doesnt work. when I open it (with admin rights) I see the copyright and warnings then it closes and opens a new windows. it does that again and again sort of like a loop
Click to expand...
Click to collapse
same here
edit: solved using this version
View attachment 3692066
kenzolo said:
same here
edit: solved using this version
View attachment 3692066
Click to expand...
Click to collapse
Abaddon said:
v3 doesnt work. when I open it (with admin rights) I see the copyright and warnings then it closes and opens a new windows. it does that again and again sort of like a loop
Click to expand...
Click to collapse
I am really sorry this is because i converted bat file to exe file
Just uploaded a new version of v3.0 just download it
And you will get two things
1 bin
2 system_extractor.bat
Just run system_Extractor and enjoy
v3ndul said:
Tools not working bro
Click to expand...
Click to collapse
Don't quote the op.
Hi,
I've managed to extract, but repacking is giving the following error:
Found System FOLDER
Creating filesystem with parameters:
Size: 2147483648
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8192
Label:
Blocks: 524288
Block groups: 16
Reserved block group size: 127
error: ext4_allocate_best_fit_partial: failed to allocate 584 blocks, out of space?
Click to expand...
Click to collapse
I double checked, and I haven't ran out of disk nor RAM.
Can you help me?
Thanks
pacacc said:
Hi,
I've managed to extract, but repacking is giving the following error:
I double checked, and I haven't ran out of disk nor RAM.
Can you help me?
Thanks
Click to expand...
Click to collapse
No bro you haven't ran out of disk or RAM :silly:
This problem persist due to size of your system folder i.e it must be greater than 2GB
Right?
Don't worry jusy edit my batch file code using notepad ++
Here which line you have to edit
Search this line
bin\make_ext4fs.exe -s -l 2048M system.img system
Now replace 2048M with 4096M
After that the line will look like
bin\make_ext4fs.exe -s -l 4096M system.img system
And after that save it.
Done
Reply it worked or not
EDIT ON 30/5/2016
Use new version 4.0 IT CAN CALCULATE SIZE AUTOMATICALLY NO NEED TO EDIT SCRIPT
thanks for sharing this
i'm done the following
1. unpack
2. editing system file content(replace & delete)
3. repack (without error)
4. copy 2 file (system.new.dat & sistem.transfer.list) through 7zip
is that the correct steps? i mean, after that i can flash it like other rom zip