Hello guys i flashed a newer version of AMCHA ROM at my I9305 and below i describe everything. I know this is not the
right place to post but I had no reply since 25 August at i9305 help forum
The Link for approve is here: http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305-glitching-3-custom-flashes-t3185966
<25 AUGUST 2015> 0 REPLIES <2 OCTOMBER>
My GT-I9305 had AMCHA ROM V4.00 recently i tried to upgrade toAMCHA ROM V6.10 i had philz recovery
So i wiped data cleared cache and after CLEAN FOR NEW ROM option to be sure
After successfull installation my phone booted normally
But the BIG ISSUE After screen timeout or lock button screen turned to black forever but it made responsive sound when i touched the screen for sliding or clicking
So i tried again and again with other choices at Aroma installer to find another combination with no success
Then i tried to install with the same way and recovery 'philz" Ressurection Rom and i saw that i have a colour glitch at white colour only at boot and app logo not at pics or anything else
And finally i tried S6 rom and it make another reversed mirrored screen.So i tried to recover by kies and
now i have knox too with reversed screen and glitch
Any solution or a part of it will be helpfull thanks for your time{UPDATED AFTER SOME TIME PASSED} DEKNOX DONE NOW I AM ROOTED WITH CWM USED CFROOT WITH ODIN AND TITANIUM
PLS SOMEONE iF YOU CANT HELP WITH THAT.JUST TELL ME IF MOTHERBOARD OR LCD Digitizer must change I DONT KNOW WHAT TO DO FOR A LONG TIME.....
Related
Hi there..
Just want to ask, last time My P7500 (10.1/3G) is REPAIRED (Replace LCD & Mainboard) @ Samsung Service Center before that i use a few custom kernel plus install CWM but after REPAIRED i saw somethng strange on "Samsung Galaxy Tab Boot Logo" the something like a KEY @ @ the bottom "Samsung Galaxy Tab Boot Logo" at first i think it's normal cause i doesn't to root or isntall cutom rom yet but when the time i want to root or even install CWM the progress is OK but when i ENTERING CWM menu the screen suddenly is RUNNING UP SIDE DOWN so FAST so i cannot see the screen normaly but i still try to root & install custom rom on my Gtab & DONE...!! but when it's Boot the screen is far than normal it split into two screen & sometimes it running up side down again like on CWM menu does anyone know what happen to my Gtab P7500...?? is it cause My Bootloader is Locked by Samsung & how to Unlock it cause i cannot ask "them" about this condition cause it happen just when i try to root & install custom rom and when entering cwm menu but when i flash official rom from random release ALL is BACK to NORMAL & nothing stange happen to my P7500
Please advise..
Regard's
soomat said:
Hi there..
Just want to ask, last time My P7500 (10.1/3G) is REPAIRED (Replace LCD & Mainboard) @ Samsung Service Center before that i use a few custom kernel plus install CWM but after REPAIRED i saw somethng strange on "Samsung Galaxy Tab Boot Logo" the something like a KEY @ @ the bottom "Samsung Galaxy Tab Boot Logo" at first i think it's normal cause i doesn't to root or isntall cutom rom yet but when the time i want to root or even install CWM the progress is OK but when i ENTERING CWM menu the screen suddenly is RUNNING UP SIDE DOWN so FAST so i cannot see the screen normaly but i still try to root & install custom rom on my Gtab & DONE...!! but when it's Boot the screen is far than normal it split into two screen & sometimes it running up side down again like on CWM menu does anyone know what happen to my Gtab P7500...?? is it cause My Bootloader is Locked by Samsung & how to Unlock it cause i cannot ask "them" about this condition cause it happen just when i try to root & install custom rom and when entering cwm menu but when i flash official rom from random release ALL is BACK to NORMAL & nothing stange happen to my P7500
Please advise..
Regard's
Click to expand...
Click to collapse
Anyone can help me about this...??
cause right now i still cannot do anything with my p7500 ..
Thanks
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1555984
Sent from my GT-N7000 using Tapatalk 2
I bought my hipstreet flare 2 months ago, 1 night when i was using skype, it froze then i restarted it then it got a boot loop(android logo keeps on repeating its self) CAN ANY ONE HELP ME HOW I CAN FIX THIS ?? thanks
not an expert but just might work
Mussa34 said:
I bought my hipstreet flare 2 months ago, 1 night when i was using skype, it froze then i restarted it then it got a boot loop(android logo keeps on repeating its self) CAN ANY ONE HELP ME HOW I CAN FIX THIS ?? thanks
Click to expand...
Click to collapse
i know this might be a bit late but i came across your thread here and id like to kindly offer my two cents, boot the tablet into recovery mode, search online as too what buttons you will need to hold while booting to make it go into this mode; as its different for some devices. from there wipe the cache and such this should be a factory restore, it will leave your files such as photos but all apps and not pre installed software will be cleared from the system enabling a clean boot.
Rom
yeah, I followed a thread which was to install a new rom which is incompatible with the flare and it's now bootlooping on CWM. I think i need the stock rom to flash and then it should be fixed! I just need the .zip to flash, or just any rom compatible with the flare.
Good Evening/Hello/Hi,
I own a Samsung Galaxy S III GT-i9300 International Version. I recently started experimenting with roms and cwm and i think i ended up in a dark tunnel. I rooted my phone and installed clockwork (cf auto root) and then tried installing KitKat Rom 4.4 but kept failing each time i entered recovery and tries to flash it. by reading other posts it was suggested to use a higher version of cwm as i was using a 5.0.4.6 version. after trying a later version the rom flashed and also the gaps without any problem. however after booting i realized i had no service, but the phone seemed ok. i decided to flash modem_XXDME4 and Modem DDEMG2 in recovery after reading some posts to get signal back. that's when the trouble started, when the phone rebooted i could not get pass the setup screen to select language, touch is not responding up to this time, i reflashed stock rom, it booted and still no touch , cant get pass the start screen of the language selection. my phone never fell and the creen has no sign of falling. any help would be greatly appreciate.....:crying::crying:
Thank You
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
I had recently found out how to root my Galaxy S3 specificly the Sprint model since then I was messing with Xposed, and a few specific Modules having to do with the UI I encountered a UI crash when I rebooted the first time, then after that I attempted to wipe the device thinking that would fix the issue only to have it not boot into the device instead stick at the boot screen (I cant share links yet or Id show an image) I have flashed the Clockwork Mod Recovery tool into the device which worked I have access to Odin and CWM I just don't know how to fix this issue and it only looks like I make things worse if I try to look it up myself does anyone know what I should do???
Edit
I managed t get the device running by finding the original firmware update zip on the samsung website then ran it throught adb the situation resolved itself thanks though.