So I installed CM12.1 on this bad boy, and I stopped using it for weeks. Come time I found the tablet and started charging it, it just keeps restarting and doesn't seem to charge.
Occasionally I could get it to recovery, but I would at least want to get it to boot up so I could use it.... Any help appreciated!
Sent from my Nexus 6 using Tapatalk
EDIT: Solved, what I had to do was:
- During the infinite charge loop with the big battery and thunder symbol, wait for it to show the Sony logo, then let it load the CM12.1 battery (small one)
- Then hold the power button until it goes back to the Sony logo
- Boot into recovery using the volume key at orange light, then reboot into bootloader (a blue light will light up)
- Then let it charge in that mode.
- Wake up in the morning and you'll have enough power to boot up into the tablet.
Related
Hi. I recently bought 2 X10 Mini E10i, which I have both flashed with nAa 2.6.29.6 and MiniCM7 2.2.2.
Both seem to work fine, but one seems to have a problem booting when the charger is connected.
When I connect the charger while the phone is off, the following happens:
1 - Charger led turns on
2 - Charger led turns off
3 - Screen turns on and nAa animation starts
4 - Before nAa animation ends screen turns off and nothing more happens
5 - If I press the home button the screen turns on again and the nAa logo is shown. After a short while the screen turns off again
If I now try to press the power button, I end up in the CWM recovery menu, and if I select reboot phone, the same thing happens again when the phone boots.
The other phone, which is running the same software seems to work fine: When the charger is connected while the phone is off, the phone turns on and boots normally.
Is there any way to have both phones work in this way?
Thanks
Just an update: It seems that sometime when the charger is plugged in while the phone is off, a battery charging logo is shown instead of the nAa boot logo. Also I have some times seen that it changes fast between the charging logo and the nAa logo.
I this what is "offline charging"? Is there any way to disable this?
Hello XDA
I ran into a problem as a result of trying to get my Moto X to turn on (verizon). I used it until it died and then it would not take a charge even after being plugged for a couple hours.
What I did was hold the volume down and power button until the boot screen came on. I had the great idea to give In to my curiosity and boot into "BP Tools."
This brilliant decision caused my phone to start acting up: When it boots up now, there is a delay in the time it takes for my lock screen to load. The touch response has decreased, I get a Sim error on the top notification bar for some time, etc.
I tried about 10 times to go back into the boot menu and select a normal boot but the option screen (Normal, Recovery, BP, etc) stays up for a split second and then the phone proceeds to power on.
So I screwed up and now I don't know what to do. Help?
So I bought an S6 Edge today. Updated it OTA to 5.1.1
Fully charged it up.
Got off a 1 hour call, the entire UI was very unresponsive
Tried rebooting, it was stuck at the boot screen.
I can only get it to reboot by holding down vol+home+power, to the 'custom OS' screen.. and then pressing down to reboot
When it boots, it says 0% battery.. and turns off
Has anyone experienced this. When I hung up the call, I had 95% battery
Can I add this is the third phone I have received from Amazon
1st one - Wifi didn't work
2nd one - 4g didn't work
3rd one - Seemed fine, now this is happening!
So the phone is off and charging.
I got the battery to come up, it says 83%
But when I turn it on (hold vol down, power and home, press cancel).. it says 0% battery, and turns off after a few seconds
I can't even enter recovery normally (vol up, power and home, held down until the android appears)
I have to use the custom OS shortcut, click cancel, and then hold vol up, power and home
I decided to try a new charger. After a few seconds I get this:
http://i.imgur.com/eFejVLY.jpg
It said 98% a minute ago!
Could this be related to the issue?
http://forum.xda-developers.com/galaxy-s6-edge/help/battery-resets-to-0-reboot-t3143657
Can't use that app as I don't have root..
you tried just holding down the power button and volume down button for 10 seconds to soft reset it?
Mine didnt boot up at all yesterday died at 80% battery, did the above and been fine since
Hello
My Kurio TAB 2 got into an infinite boot loop. The battery got completely drained and when plugging the charger it will charge for a minute and then it will try to boot again. Afterward it's off (not enough battery), then again charging for 1 minute and trying again to boot, and so on. Looks like this tablet everytime it's connected to a charging source it will try to boot if turned off...
I had to unsolder the battery and charge it manually. After that tried to get into Recovery mode but it will not work. Every time it will try to boot like when normally switching it on, and after a minute, the screen goes black and then tries to boot again (boot loop). I tried to boot into recovery mode with Volume Down + Power button, then releasing the power button and holding the Volume Down button. Also the same with Volume Up + Power Button. Nothing made a difference. Every time it will just boot in an infinite loop until the batter is drained. To avoid this, I have to always disconnect and then connect back the battery.
Also tried to boot it into recovery mode using ADB tools (with "adb wait-for-device"), but without luck.
One "interesting" thing, is that when connected to the PC and booting (from itself), I can hear the sound of "New device connected" and after 1-2 seconds the disconnected sound. These connect/disconnect sounds will happen twice in the first ~10 seconds of one boot cycle.
The problem started from one day to another. My kid was playing with it as usual and after it was discharged and turned off, I plugged the charger and this loop started.
Would be great if anybody could help or has an idea of what I could still try to fix this.
Thank you!
Hello
I have the same problem here.
Is there already a solution for this?
After leaving the tablet to charge overnight, I found that it was stuck on the wave animation. Holding the power button fixed it and gave me the ability to use it again. Unplugged charger and thought tablet was ok. After a while I find that it's stuck in the animation again, so I figure a restart would do it good, after holding the power button for who knows how long I manage to restart it, but it gets stuck at the "restarting" message. After a while it falls asleep and when I wake it up, it is once again stuck in the animation. I hold power button, but this time nothing happens, so I open the micro SD thing next to the charger thing, and press the tiny red thing beside the black thing(sd card?) and it shuts down. Holding the power button to start it takes it first to the Sony text, then some more Sony text, but after that it gets stuck in the wave animation. Another thing to note is that I was using about 90% of it's storage so was thinking this is a reason.
Anyone know of a fix?
I'm open to installing a custom ROM or factory resetting it, don't really have anything important that I want to recover, just want to turn it into something usable again.
A link to one of these guides would be helpful.
When plugging it into PC via USB I cannot get it to show up in xperia Companion. It does show up in Devices I think, but I can't use it for anything.