Me.n.KHOF4SH said:
Hey guys, I have an otg cable for my tab 2. I also running cm 12.1 on my tab. (ps, I also updated my ROM and didn't workout)
Now, the wired thing is that when I connect a flash to otg it works perfectly fine, but when I connect my usb keyboard and gamepad it won't recognize it. (Both keyboard and gamepad work perfectly in G3 and SII)
I tried many apps, but nothing! Any thoughts guys?
Click to expand...
Click to collapse
Try posting this problem in cm12's thread
Sent from my GT-P3100 using Tapatalk
Maybe it's because we have a 3.0.31 kernel on CM. We're working on a new omap based 3.0.101 kernel. Hope we'll get it done this year... Samsung don't make it easy...
Related
Please, I want to know which kernel and custom roms which allow me to connect a USB OTG, I am with kernel Siyah 3.4.1 and two ROMs: Hydra and Resurrection Remix (in dual boot) and I can not connect pen drive in S2 he does not recognize.
I have to configure anything else? Or this kernel, these ROMs are not compatible with USB OTG?
I appreciate the help.
Siyah supports full OTG (mouse, keyboard, pendrives formatted in FAT/FAT32/NTFS). Problem is probably in your ROMs.
joaonds said:
Please, I want to know which kernel and custom roms which allow me to connect a USB OTG, I am with kernel Siyah 3.4.1 and two ROMs: Hydra and Resurrection Remix (in dual boot) and I can not connect pen drive in S2 he does not recognize.
I have to configure anything else? Or this kernel, these ROMs are not compatible with USB OTG?
I appreciate the help.
Click to expand...
Click to collapse
try ' stickmount' app from stores and see
przemcio510 said:
Siyah supports full OTG (mouse, keyboard, pendrives formatted in FAT/FAT32/NTFS). Problem is probably in your ROMs.
Click to expand...
Click to collapse
Thanks.
You recommend some ROM with this support ?
Sun90 said:
try ' stickmount' app from stores and see
Click to expand...
Click to collapse
Dont work...
Still same problem: USB OTG does not recognize pen drive.
I reinstalled the ROM (Resurrection Remix 2.6.1) and the problems remains.
I need help.
Hello, could you solve it?
Hello,
I have installed the AmatROM for Galaxy Tab 3 and I am still not getting USB charging. I would post in the ROM forum, but I do not have permissions yet.
kd7eir said:
Hello,
I have installed the AmatROM for Galaxy Tab 3 and I am still not getting USB charging. I would post in the ROM forum, but I do not have permissions yet.
Click to expand...
Click to collapse
Hey,
You could simply send me a PM about this ! :laugh:
Response to your notice:
The USB Charging is NOT normally implemented by the ROM itself
It's implemented by the Kernel and BinDroid Kernel have this feature.
Properly check your USB Cable and please, DON'T USE THE DEVICE WHILE IT'S CHARGING through the USB.
You can use Galaxy Current Charging (search in PlayStore) to check if it's charging or not.
Sent from my room mate's computer
Nonta72 said:
Hey,
You could simply send me a PM about this ! :laugh:
Response to your notice:
The USB Charging is NOT normally implemented by the ROM itself
It's implemented by the Kernel and BinDroid Kernel have this feature.
Properly check your USB Cable and please, DON'T USE THE DEVICE WHILE IT'S CHARGING through the USB.
You can use Galaxy Current Charging (search in PlayStore) to check if it's charging or not.
Sent from my room mate's computer
Click to expand...
Click to collapse
Thank you for the information. I reinstalled and it's charging via USB now.
kd7eir said:
Thank you for the information. I reinstalled and it's charging via USB now.
Click to expand...
Click to collapse
Good to hear
Hope u are enjoying the ROM
Sent from my room mate's computer
i bought a wired xbox360 controller and i wanted to pair it with my phone, a samsung galaxy s3 (GT-I9300), and on it i have android 4.3...
when i connect the pad with the otg cable, it lights up in the centre, but the smartphone desn't recognized it, like if it isn't connected. i tried to use the "usb/tb joystick" app, and also the "tincore keymapper" app, but my device doesn't recognized the pad... how can i pair it with my smartphone?
ps. i have a rooted device if it can help
pps. soory for my bad english, but it isn't my first language
danai97 said:
i bought a wired xbox360 controller and i wanted to pair it with my phone, a samsung galaxy s3 (GT-I9300), and on it i have android 4.3...
when i connect the pad with the otg cable, it lights up in the centre, but the smartphone desn't recognized it, like if it isn't connected. i tried to use the "usb/tb joystick" app, and also the "tincore keymapper" app, but my device doesn't recognized the pad... how can i pair it with my smartphone?
ps. i have a rooted device if it can help
pps. soory for my bad english, but it isn't my first language
Click to expand...
Click to collapse
You must find kernel compatible with controler and enable it
Custom kernel requieres root and custom recovery.
verny94 said:
You must find kernel compatible with controler and enable it
Custom kernel requieres root and custom recovery.
Click to expand...
Click to collapse
which kernel is compatible with touchwiz 4.3 (and cm11 m8) and the controller?
ps. sorry but i dind't see your answer XD
danai97 said:
which kernel is compatible with touchwiz 4.3 (and cm11 m8) and the controller?
Click to expand...
Click to collapse
Uhm... CM11 don´t know, because I don´t use it.
TW 4.3 means stock ROM? Its Boeffla kernel.
verny94 said:
Uhm... CM11 don´t know, because I don´t use it.
TW 4.3 means stock ROM? Its Boeffla kernel.
Click to expand...
Click to collapse
What's the difference from this kernel and the stock one?
And yes tw 4.3 was for the stock rom XD
Has anyone tried whether otg works after using a powered otg cable?
Just like it worked on Xperia L .
Thanks if anyone can reply.
:good::good::good:
I mean it is need kernel and software support or anything else? On my old ace 3 it worked from cm11 to 12.1 well
FirstMn said:
I mean it is need kernel and software support or anything else? On my old ace 3 it worked from cm11 to 12.1 well
Click to expand...
Click to collapse
well it works well for the xperia L stock rom no need of cm.
http://forum.xda-developers.com/xperia-l/general/guide-usb-otg-support-sony-xperia-l-t2427150
and for nexus 4
http://forum.xda-developers.com/nexus-4/orig-development/usb-otg-externally-powered-usb-otg-t2181820
and some other devices got otg using this method as well.
I don't know whether this will work for lollipop.
we should be able to get otg to m4 through this or similar method.but actually nobody seems to be interested.
I dont have a powered otg cable or usb hub to test it.
If anyone can test it please let me know.
thanks
why is nobody interested?
Its a software bug with M4, other phones work without having external power.
boylush said:
Its a software bug with M4, other phones work without having external power.
Click to expand...
Click to collapse
If it is a software issue, we should be able to make it.
but i think the cpu and hardware supports usbhost but sony haven't made it possible to power a device externally.
and files such as Android.hardware.usb.host is missing on the m4.
check usb host checker.
if we can add these required files and power the device externally. otg should work just like xperia L.
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
dushandiaz said:
If it is a software issue, we should be able to make it.
but i think the cpu and hardware supports usbhost but sony haven't made it possible to power a device externally.
and files such as Android.hardware.usb.host is missing on the m4.
check usb host checker.
if we can add these required files and power the device externally. otg should work just like xperia L.
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Should be a mapping issue
Hi all,
I am using Moto E 2015[XT1521] 4G variant with CM 12.1-20160104-NIGHTLY, unlike the stock lollipop ROM there is no option to mount OTG drives.
There are some scenarios of the problem :
1. Some other Moto E 2015 4G variants(e.g. XT 1524 & some other XT15XX models) claims to have OTG support with CM 12.1 by usuing ES file explorer or Chainfire Stickmount .
2. Some guys in the forum saying that it lacks OTG support but The stock ROM of this model supports OTG.
The Solutions I've Tried :
1. ES file explorer : nothing happens
2. Chainfire Stickmount : nothing happens
3. I have used some custom kernel (e.g. Squid Kernel): nothing happens
till now I'm facing the problem. Please Help !!!!
Same here bro......can't use my OTG Drive to flash ROMs
Sent from my XT1521 using Tapatalk
ayush rao said:
Same here bro......can't use my OTG Drive to flash ROMs
Sent from my XT1521 using Tapatalk
Click to expand...
Click to collapse
same here bro ! also the TWRP doesn't supports OTG.
* make sure its formatted with FAT32 as it only supports FAT32
To support OTG, the device needs a 5V amplifying booster. No version of Moto E have that booster. That's why a pendrive through OTG is not detected. But if you can supply an outside source of power to the OTG device, then your phone can mount it. This is according to @squid2
Dexter_S said:
To support OTG, the device needs a 5V amplifying booster. No version of Moto E have that booster. That's why a pendrive through OTG is not detected. But if you can supply an outside source of power to the OTG device, then your phone can mount it. This is according to @squid2
Click to expand...
Click to collapse
Then.. How can I do that?
but it supports otg on stock ROM....
satyajit161 said:
Then.. How can I do that?
but it supports otg on stock ROM....
Click to expand...
Click to collapse
Yes, that I saw for myself. Don't know. There are no official documentation for OTG support.
satyajit161 said:
Hi all,
I am using Moto E 2015[XT1521] 4G variant with CM 12.1-20160104-NIGHTLY, unlike the stock lollipop ROM there is no option to mount OTG drives.
There are some scenarios of the problem :
1. Some other Moto E 2015 4G variants(e.g. XT 1524 & some other XT15XX models) claims to have OTG support with CM 12.1 by usuing ES file explorer or Chainfire Stickmount .
2. Some guys in the forum saying that it lacks OTG support but The stock ROM of this model supports OTG.
The Solutions I've Tried :
1. ES file explorer : nothing happens
2. Chainfire Stickmount : nothing happens
3. I have used some custom kernel (e.g. Squid Kernel): nothing happens
till now I'm facing the problem. Please Help !!!!
Click to expand...
Click to collapse
I'm using the same Indian variant and otg does work..tried PDs and wireless keyboard and mouse. I'm using the latest LP Pac Rom with squid kernel 11e
Sent from my XT1521 PAC-MAN Rom using Tapatalk
Dexter_S said:
Yes, that I saw for myself. Don't know. There are no official documentation for OTG support.
Click to expand...
Click to collapse
If the stock android is giving the OTG support then THIS IS a official documentation of OTG hardware support.
rushabshah32 said:
I'm using the same Indian variant and otg does work..tried PDs and wireless keyboard and mouse. I'm using the latest LP Pac Rom with squid kernel 11e
Sent from my XT1521 PAC-MAN Rom using Tapatalk
Click to expand...
Click to collapse
I know ! but I'm searching support for Cyanogenmod . Anyways Thanks a lot for the information bro :good: ! It proves that there is hardware compatibility for OTG.
I think it depends on the ROM and kernel you use. I'm on the latest RR update with the squid kernel r14 and I have OTG. On most other roms I couldn't get any OTG things working.
calxk713 said:
I think it depends on the ROM and kernel you use. I'm on the latest RR update with the squid kernel r14 and I have OTG. On most other roms I couldn't get any OTG things working.
Click to expand...
Click to collapse
What is "RR update" ?
satyajit161 said:
What is "RR update" ?
Click to expand...
Click to collapse
Resurrection remix Rom update
Sent from my XT1521 PAC-MAN Rom using Tapatalk
rushabshah32 said:
Resurrection remix Rom update
Sent from my XT1521 PAC-MAN Rom using Tapatalk
Click to expand...
Click to collapse
Thank you for the information. but I am searching otg support for CM.
Apparently using a otg y cable solves the problem. This enables to add the charger to other point thus giving it the proper power.
Can anyone tell me if OTG will work on a stock XT1528 if I add external power?
I just tried it on my Boost Mobile XT1526 running CM12.1 and it works fine with a normal OTG cable. My USB flash drives and a USB mouse I have work fine.
I have to mount it manually with terminal though. I can't find anything in the Play store that'll mount it except for two file managers, which isn't ideal. Because I'd rather use the CyanogenMod file manager.
I tried using normal Mounters from the Play store but they didn't do squat.
Debdude1986 said:
I just tried it on my Boost Mobile XT1526 running CM12.1 and it works fine with a normal OTG cable. My USB flash drives and a USB mouse I have work fine.
I have to mount it manually with terminal though. I can't find anything in the Play store that'll mount it except for two file managers, which isn't ideal. Because I'd rather use the CyanogenMod file manager.
I tried using normal Mounters from the Play store but they didn't do squat.
Click to expand...
Click to collapse
can u please elaborate with steps . Thank you !
Dexter_S said:
Apparently using a otg y cable solves the problem. This enables to add the charger to other point thus giving it the proper power.
Click to expand...
Click to collapse
but, it was working on stock android without any external power supply ...
satyajit161 said:
but, it was working on stock android without any external power supply ...
Click to expand...
Click to collapse
You are right, the stock ROM can mount it perfect without a external power source. CyanogenMod can to. I've done it a couple times now, by mounting it manually with a terminal app.
You need a rooted phone for this, CyanogenMod is already rooted.
Open a terminal app, doesn't matter which one. I use the terminal app that's built into CyanogenMod. Type this into the terminal app, pressing enter after each one:
su
mount -o rw -t vfat /dev/block/sda1 /storage/usbotg
For me my USB flash drive is /dev/block/sda1, yours should be the same, if not then change /dev/block/sda1 to whatever yours is.
After you mount it, the USB drive should be found under /storage/usbotg in a file manager.
Don't forget to type this into the terminal app before you unplug the USB drive, else it might corrupt it:
umount /storage/usbotg
Hope that helps!