Have searched through the posts but could not find a solution.
Flashed 5.1.1 stock firmware via odin couple of times. Even changed Odin from version 3.10.6 to 3.10.7. Still stuck on the Samsung Galaxy S6 edge powered by android screen. Have tried the recovery mode reset and wipe cache but to no avail.
Flashing via Odin was successful, then it reboots and the blue screen comes on "Erasing....." I don't think the Erasing thing gets completed and it reboots to the boot screen and stays there.
At the moment downloading the 5.0.2 firmware. Any help would be appreciated.
Seems downgrading is not a possibility. Have flashed the 5.1.1 firmware. Still stuck at boot. The reboot after flashing shows the blue scree and a task bar slowly filling up, then the "Erasing..." part starts and reboots and stays at the Galaxy S6 edge screen. Seems the Reactivation is on, and there's a "dm-verity verification failed...." on the bottom of the recovery.
Could be a corrupted download. Try downloading the 5.1.1 firmware again.
Rosies said:
Could be a corrupted download. Try downloading the 5.1.1 firmware again.
Click to expand...
Click to collapse
Thanks, will give it a go. Previous was downloaded from Sammobile.....any other safe sites?
I am having the same problem. I have been trying to fix this for almost a month but nothing is working. I had to buy another phone. Could you post if you find a solution? Thanks
Sent from my SM-N920P using XDA Free mobile app
bcombel said:
I am having the same problem. I have been trying to fix this for almost a month but nothing is working. I had to buy another phone. Could you post if you find a solution? Thanks
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
I will do if it works out. At the moment it's still the same. Downloaded the firmware again and back to square one......if anyone can solve it it's the people here, so still hoping....
Nothing seems to work. Smart Switch and Kies3 say "not supported device". Tried flashing TWRP, have that activation lock error. For the moment have a $600 paper weight
Halfbaked156 said:
Nothing seems to work. Smart Switch and Kies3 say "not supported device". Tried flashing TWRP, have that activation lock error. For the moment have a $600 paper weight
Click to expand...
Click to collapse
on the same boat.
its just my 3 rd day got the phone.
let me know if you have any luck.
bought the phone this Wednesday from JB HIFI, Sydney, Australia, 64GB, on the first day i update the phone to the latest stock rom 5.1.1 which is LMY47X.G925IDVU2DOI2.
Firstly, i installed TWRP and rooted the s6 successfully using TWRP Recovery 2.8.7.1 and Root for G925F Android 5.1.1 (unofficial).
Then I was trying to install custom rom. but i format the data in TWRP without backup anything, like efs.
1.Flashed the stock rom (G925IDVU2DOI2_G925IXSA2DOI2_XSA.zip) from sammobile.com odin with no errors. (I downloaded twice from different sources)
after, reboot. it shows cant find /cache and /system.
It shows dm-verity verification failed.
and then shows the stock recovery mode
then i use odin and flashed the TWRP from the above post, and it shows internal storage 0MB.
Checked Samsung Galaxy S6/S6 Edge PAC Firmware/PIT File Collection
The pac and pit file is not released yet.
Adb & Fastboot not working, it cant detect the device.
Smart switch didnt work, shows unsupported device.
is it the partition messed up?
Halfbaked156 said:
Have searched through the posts but could not find a solution.
Flashed 5.1.1 stock firmware via odin couple of times. Even changed Odin from version 3.10.6 to 3.10.7. Still stuck on the Samsung Galaxy S6 edge powered by android screen. Have tried the recovery mode reset and wipe cache but to no avail.
Click to expand...
Click to collapse
Install Unikernel via Odin, and then install a ROM through TWRP.
Uzair40 said:
Install Unikernel via Odin, and then install a ROM through TWRP.
Click to expand...
Click to collapse
Unikernal flashing did not work....Custom...something...R/L was the message. So the problem is the Reactivation Lock on?
Halfbaked156 said:
Unikernal flashing did not work....Custom...something...R/L was the message. So the problem is the Reactivation Lock on?
Click to expand...
Click to collapse
I remembered that i saw the R/L message on my phone yesterday too, yes, it it about the reactivation lock,
i went to the security setting and switch off the find my mobile remotely. and that message disappeared.
Related
Hello,
i have a galaxy mega I9205 LTE, three weeks ago i have flashed the original 4.4 KK update from samfirmware, and from that moment i have no more boot logo (the one with the "Galaxy mega" words), and download mode screen. I have done a full wipe (clean cache, wipe data, and kalvin wipe) from CMW and original recovery, tried with CM11 rom, and other 4.4 roms (can't downgrade to 4.2.2 ), nothing, my boot logo don't come out.
I think the fault is the bootloader, but i don't know if it can be restore or something like that.
How can i fix the problem?
Up
Tried another time, wipes on cwm recovery, flash with odin 3.09, no logos. Damn
UP
Did you flash the i9200 KK ROM or the i9205 LTE ROM for the phone?
ianneo said:
Did you flash the i9200 KK ROM or the i9205 LTE ROM for the phone?
Click to expand...
Click to collapse
Obivously 9205 lte like my phone.
UP! :angel:
Same problem : http://forum.xda-developers.com/galaxy-mega/help/enter-odin-download-mode-stock-4-4-2-t2811866
Cmon! Up!
try to use a different odin version, like 1.85.
and/or try another firmware.
i know there are at least 2 versions out there on sammobile, ne4 and nf2.
Flashing I9200XXUDNF3 from sammobile with odin 3.09 didnt slove the problem. Should i try with odin 3.04?? (My phone is GT-I9200)
Yeah. I tried to update to Kitkat and have flashed with almost every version of odin and the results were all the same.
However, I didn't encounter problems like you did.
Only the system (rom), recovery, boot (kernel) were flashed, and the modem (radio) and bootloader weren't registered into the phone.
And since my bootloader was still the old one (Knox-free), I was able to downgrade and did OTA update.
So now, for your situation, I can only think of trying to update with Kies.
DO NOT AND NEVER try what I did since you don't have download mode to confirm whether you have the new Knox bootloader, so you might end up BRICKED.
Again. Try to update with Kies. DO NOT downgrade by odin flash old firmwares (4.2.2).
And if Kies works out for you, let the other member (who's having same problem) know.
jk0l said:
Yeah. I tried to update to Kitkat and have flashed with almost every version of odin and the results were all the same.
However, I didn't encounter problems like you did.
Only the system (rom), recovery, boot (kernel) were flashed, and the modem (radio) and bootloader weren't registered into the phone.
And since my bootloader was still the old one (Knox-free), I was able to downgrade and did OTA update.
So now, for your situation, I can only think of trying to update with Kies.
DO NOT AND NEVER try what I did since you don't have download mode to confirm whether you have the new Knox bootloader, so you might end up BRICKED.
Again. Try to update with Kies. DO NOT downgrade by odin flash old firmwares (4.2.2).
And if Kies works out for you, let the other member (who's having same problem) know.
Click to expand...
Click to collapse
:good:
This is the #1 thing I am seeing members doing, attempting to downgrade from KK 4.4.2 Kitkat. It's becoming a trend so to speak. Although I will say it is sometimes a hardware error/issue, not many are reading before installing/attempting to downgrade.......
To the others.......
Once there, there is no going back. Yes you can flash Custom Roms all you want as long as you do not attempt to successfully downgrade the KitKat Knox Bootloader and pass. The OTA even tells you so and this is on any Galaxy phone you buy, not just the Mega.
If you can get into Recovery, then recover one of your backups, only if you didn't update to the Official KitKat 4.4 with the Updated Knox Bootloader either thru OTA or Odin
If you can still get into download mode then you are somewhat okay and there is still some hope. You can try flashing the Official Firmware to recover. Only flash ( pre KitKat 4.4 ) Official Firmwares thru Odin if you didn't already update to the Official KitKat 4.4 with the Updated Knox Bootloader either thru OTA or Odin.
If you can not get into Download Mode and the phone does not boot up or plugging in the phone to the computer with no battery installed you get the qhsusb_dload mode, then the possibility that you are likely bricked is good.
From here you either send it for JTag or see if someone with the same Phone and Carrier can make you a debrick image for you to burn to a memory card so your phone can be able to boot off it into Download Mode and Odin the Official Firmware. You will need to search for this method.
corrystile said:
Hello,
i have a galaxy mega I9205 LTE, three weeks ago i have flashed the original 4.4 KK update from samfirmware, and from that moment i have no more boot logo (the one with the "Galaxy mega" words), and download mode screen. I have done a full wipe (clean cache, wipe data, and kalvin wipe) from CMW and original recovery, tried with CM11 rom, and other 4.4 roms (can't downgrade to 4.2.2 ), nothing, my boot logo don't come out.
I think the fault is the bootloader, but i don't know if it can be restore or something like that.
How can i fix the problem?
Click to expand...
Click to collapse
UP.
Tried to use odin 3.09, update bootloader, with new Italian firmware, nothing.
Restore the phone through Kies: nothing.
Galaxy MEGA and Download Mode screen don't appear.
What can i do?
Hello guys i got same problem like you after OTA updade to kitkat,
Now i using spirit ron by silesh, what i did is just flash cutom recovery with odin like a blind man!
Just verify you enter download mode.
Turn off your phon( after phone vibrate)
Press vol down+home+power, hold together until phone vibrate and wait about 2sec and then release all button
To verify you enter download mode, please wait about 3minutes if phone not boot to os, you are just one step to download mode, just press and relese volume up to enter download mode
Then connect your phone to pc with odin run in administrator privileges, if odin detect your phone youre ready for rumble LOL
Sent from my GT-I9205 using XDA Free mobile app
So flashing Spirit Rom by Silesh will fix my problem?
corrystile said:
So flashing Spirit Rom by Silesh will fix my problem?
Click to expand...
Click to collapse
No it wont i think this is bootloader issue and custom rom wont change your bootloader so just did like a blind man in download mode, download mode works just only no display. Need new bootloader or bootloader fix for this problem
Sent from my GT-I9205 using XDA Free mobile app
SkyQaz said:
No it wont i think this is bootloader issue and custom rom wont change your bootloader so just did like a blind man in download mode, download mode works just only no display. Need new bootloader or bootloader fix for this problem
Click to expand...
Click to collapse
Flashing using kies didn't solve the problem for me too... "Need new bootloader or bootloader fix for this problem"
Hello,
I have the same problem. I dont have boot logo, i can access to download mode but without any screen.
I tried everything i could but the problem is still here.
When i turn my phone on i have a black screen and nothing else after.
Sometimes the phone boot on the rom i installed but i works 1 times/5.
Someone can help me please, i can't use my phone since i did the OTA on 4.4.2.
Thanks a lot
Just received a phone (Samsung note 3) everything works (sound, led, touchscreen etc..) except the screen is not powering on. (No samsung boot logo)
what is the best thing i can do, trying to recovery by Kies or Odin?
Hi!
Phone finds the update, downloads the 600+ mb then restarts for installation then the Update Failed thingy comes up. And after this, while searching for updates it says " You have the latest version". Went to recovery more, reset the phone, then the same thing happens.
Any suggestions?
Or do I just download the 5.1.1 firmware and flash it with Odin?
Any help would be appreciated!
Halfbaked156 said:
Hi!
Phone finds the update, downloads the 600+ mb then restarts for installation then the Update Failed thingy comes up. And after this, while searching for updates it says " You have the latest version". Went to recovery more, reset the phone, then the same thing happens.
Any suggestions?
Or do I just download the 5.1.1 firmware and flash it with Odin?
Any help would be appreciated!
Click to expand...
Click to collapse
Download the latest stock firmware, and flash it with Odin.
Uzair40 said:
Download the latest stock firmware, and flash it with Odin.
Click to expand...
Click to collapse
Thanks for the reply. I guess that's the only alternative before I root. But there's this message in recovery mode "dm-verity verification failed....Need to check DRK first"
No idea what this is, have googled and it is not related to the problems shown on the web. Phone is not rooted, still official firmware.
So, is it safe to flash the latest firmware through Odin or will it brick my phone?
Halfbaked156 said:
Thanks for the reply. I guess that's the only alternative before I root. But there's this message in recovery mode "dm-verity verification failed....Need to check DRK first"
No idea what this is, have googled and it is not related to the problems shown on the web. Phone is not rooted, still official firmware.
So, is it safe to flash the latest firmware through Odin or will it brick my phone?
Click to expand...
Click to collapse
It's safe.
Uzair40 said:
It's safe.
Click to expand...
Click to collapse
Another obstacle. Odin or Win 10 doesn't recognize my phone in Download Mode. Have tried everything that I know of.....maybe it is win 10?
Halfbaked156 said:
Another obstacle. Odin or Win 10 doesn't recognize my phone in Download Mode. Have tried everything that I know of.....maybe it is win 10?
Click to expand...
Click to collapse
Got it working. Flashed the file..now it's stuck on the Samsung Galaxy S6 edge powered by Android screen.
Have tried factory reset, wipe cache, re-flashed....still stuck on it. Any help please?
Hi everyone, please help me with this problem. My phone is a J5 Sm J500m, with 6.0.1 andrioid and root with Odin and CF Autoroot.
The phone was working great (root and system all working smoothly) until I F***ed Up by deactivate in the menu de feature "OEM UNLOCK" and restarted the phone and i got a message saying "Custom binary blocked by FRP".
I have tried to re-root with odin and of course i cant do it beacause of the FRP block, my question is: how can i bypass this block because the system works well i just cant fix this issue.
Thanks to everyone
tryser said:
Hi everyone, please help me with this problem. My phone is a J5 Sm J500m, with 6.0.1 andrioid and root with Odin and CF Autoroot.
The phone was working great (root and system all working smoothly) until I F***ed Up by deactivate in the menu de feature "OEM UNLOCK" and restarted the phone and i got a message saying "Custom binary blocked by FRP".
I have tried to re-root with odin and of course i cant do it beacause of the FRP block, my question is: how can i bypass this block because the system works well i just cant fix this issue.
Thanks to everyone
Click to expand...
Click to collapse
Go to SamMobile download the firmware for your device and flash it with Odin.
After that just check OEM unlocking and re root.
PalmCentro said:
Go to SamMobile download the firmware for your device and flash it with Odin.
After that just check OEM unlocking and re root.
Click to expand...
Click to collapse
Hello there, i follow your directions, went to sammobile and download the firmware (choose de correct country) and i flash it with Odin,everithing went as it should and got the "PASS" on odin, but at the restart of the phone it got stuck in he samsung logo forever, i restarted the phone but it keeps getting stuck in the samsung logo.
¿What should i do? thank you for your help men
tryser said:
Hello there, i follow your directions, went to sammobile and download the firmware (choose de correct country) and i flash it with Odin,everithing went as it should and got the "PASS" on odin, but at the restart of the phone it got stuck in he samsung logo forever, i restarted the phone but it keeps getting stuck in the samsung logo.
¿What should i do? thank you for your help men
Click to expand...
Click to collapse
I would say you should boot into recovery and wipe cache, if it doesn't help make a full wipe.
It can sometimes take time till it boots....
PalmCentro said:
I would say you should boot into recovery and wipe cache, if it doesn't help make a full wipe.
It can sometimes take time till it boots....
Click to expand...
Click to collapse
I did everything you said and it work! thank you so mucho.
ONE last question, the firmware is running andrioid 5.1.1, so i tried to update the the software. when i click, on "software update" it says "registering device" and then it pops out processing failed.
I teliminated the data of "software update" from application manager but i still cant update the software.
thanks a LOT men :good:
tryser said:
I did everything you said and it work! thank you so mucho.
ONE last question, the firmware is running andrioid 5.1.1, so i tried to update the the software. when i click, on "software update" it says "registering device" and then it pops out processing failed.
I teliminated the data of "software update" from application manager but i still cant update the software.
Click to expand...
Click to collapse
You can manually do it via sammobile or via Samsung Kies.
PalmCentro said:
You can manually do it via sammobile or via Samsung Kies.
Click to expand...
Click to collapse
I fix everything! Thanks men:good::good::good::good::good:
Hi everybody,
Yesterday I decided I wanted to root my S6 Edge phone (SM-G925F, International Version) and flash a custom ROM onto it. I managed to root it successfully and install a working version of TWRP.
I began installing the XtreStoLite Custom ROM onto my S6 Edge. Around the 10% mark of installation, my phone suddenly booted. I read online that I should boot back normally and install an app which reduces my CPU power or something like that, can't really remember. But when I tried to boot back normally, it was stuck in a boot loop with only the Samsung S6 Edge logo appearing.
During installing TWRP I bricked my phone a couple of times because I installed wrong versions of TWRP. I flashed a stock firmware a few times to get rid of the brick (a similar bootloop), which worked every time like a charm.So I figured that with this "Custom ROM bootloop", I can just flash the stock firmware, boot everything back and try again. But after flashing the previously so glamorously working stock FW, I was stuck in a bootloop way worse than before.
This time the phone starts, I get the S6 edge logo, I get a "installing software update" screen for about a millisecond and then a "no command" screen. After the latter, it repeats. Once repeated for - I don't know - a 1000 times, it boots into stock recovery.
I tried factory resetting, which only gets rid of "software update" and "no command" screens. The bootloop stays.
What do you suggest I do? Can I do anything? Could it possibly work with 'another' stock firmware file?
Thanks in advance :good:
Probably you end up with dm verify verification error, drk issue, try to flash back stock firmware using repartition and a pit file to see if will fix your issue
Thanks for the quick reply mate. Just to get this right, I don't want to mess anything else up: first, I download a new firmware from lets say, SamMobile. When flashing with Odin, I check the box re-partition. What do I do with the pit file? If I download the FW from SamMobile, I'm supposed to get a CSC file right? With the pit file inside of it? Will Odin recognize it just like that (from the CSC file)?
you must download pit file and add in pit file, depending on your csc code of firmware you want to flash search that pit file on google
Okay, thanks. I googled and found this website: droidviews.com/download-pit-files-for-galaxy-s6-edge-all-models/
You figure I could just use a pit file downloaded from there? Or should I worry about 32GB / 64 GB pit files?
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
jalle65 said:
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
Click to expand...
Click to collapse
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Ok so, I flashed the FW callumbr1 suggested, with the required pit file. Something happened! The phone now boots from the S6 Edge screen all the way to the next screen, the one with 'Samsung' text on it. The logo keeps flashing, with it never going away. So still in bootloop, but a little different one.
What now? Thanks for all of the advice thus far!
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
jalle65 said:
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
Click to expand...
Click to collapse
It's because the glowing Samsung logo is not actually a bootloop.
It's just on that logo while the phone builds the firmware. Usually takes about 10-20 minutes on that logo screen. Glad I could help and it's all working :good: thanks the posts if you can
Is your s6 edge bootloader unlocked? If so, how?
I am unable to load TWRP as my bootloader is locked, and can't find a solution anywhere. Any pointers?
callumbr1 said:
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Click to expand...
Click to collapse
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
razenxd said:
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
Click to expand...
Click to collapse
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
callumbr1 said:
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
Click to expand...
Click to collapse
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
razenxd said:
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
Click to expand...
Click to collapse
See if you can manually boot to recovery. If so then wipe data and cache and reboot
callumbr1 said:
See if you can manually boot to recovery. If so then wipe data and cache and reboot
Click to expand...
Click to collapse
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
razenxd said:
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
Click to expand...
Click to collapse
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
callumbr1 said:
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
Click to expand...
Click to collapse
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
razenxd said:
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
Click to expand...
Click to collapse
Only check repartition if you flash a pit file. Don't select nand erase
callumbr1 said:
Only check repartition if you flash a pit file. Don't select nand erase
Click to expand...
Click to collapse
That's what i did.
Fingers crossed
Edit: Now stucked in galaxy s6 edge screen before samsung logo.
Edit 2 : Tried to access recovery, phone got again in system update screen and then stuck on erasing
rebooted then tried to access recovery again and got the no command screen again.
Edit 3 : After several attempts to access recovery it got me to the black screen before the wipe options of recovery appeared and phone hang up.
It has the following
No Support SINGLE-SKU
Supported API: 3
#MANUAL MODE v1.0.0#
Appling Multi-CSC
Applied The CSC Code :XEO
Succesfully applied multi-csc
Hum, just noticed in download mode that the device has on the reactivation lock.
Could that be one problem that i face?
I tried to root my Samsung Galaxy S6 Edge, installed TWRP & tried to install SuperSU 2.79 and it got stuck on creating image, so I rebooted my phone and it didn't boot.
At this point i could only access TWRP and Donwload mode, I got worried and decided to flash stock recovery via ODIN but I think i forgot to uncheck auto-reboot box (Don't know if this step could cause the problem but I think they are related), and I know it's trying to open recovery mode because when I flash TWRP again, some red letters appear on the top-left corner of the screen, same as when I opened TWRP custom recovery, so at the moment I can only open Download mode.
The things I've tried:
ADB reboot recovery: It won't recognise the device anymore
Flash Stock Firmware/Recovery: After sboot.bin it fails (I have the Firmware for my specific model and region)
Also, I'm new to the forums stuff so forgive me if I do something wrong
I hope someone could help me,as I've searched all over the internet and found close to nothing about this thread
Afganito said:
I tried to root my Samsung Galaxy S6 Edge, installed TWRP & tried to install SuperSU 2.79 and it got stuck on creating image, so I rebooted my phone and it didn't boot.
At this point i could only access TWRP and Donwload mode, I got worried and decided to flash stock recovery via ODIN but I think i forgot to uncheck auto-reboot box (Don't know if this step could cause the problem but I think they are related), and I know it's trying to open recovery mode because when I flash TWRP again, some red letters appear on the top-left corner of the screen, same as when I opened TWRP custom recovery, so at the moment I can only open Download mode.
The things I've tried:
ADB reboot recovery: It won't recognise the device anymore
Flash Stock Firmware/Recovery: After sboot.bin it fails (I have the Firmware for my specific model and region)
Also, I'm new to the forums stuff so forgive me if I do something wrong
I hope someone could help me,as I've searched all over the internet and found close to nothing about this thread
Click to expand...
Click to collapse
Flash stock firmware it will work.
The reason it fails at sboot.bin is because your flashing a firmware with an older bootloader than you currently have.
Flash a newer/newest firmware and it will work.
callumbr1 said:
Flash stock firmware it will work.
The reason it fails at sboot.bin is because your flashing a firmware with an older bootloader than you currently have.
Flash a newer/newest firmware and it will work.
Click to expand...
Click to collapse
I tried with Nougat 7.0, still have the same problem, it keeps failing at sboot.bin
Afganito said:
I tried with Nougat 7.0, still have the same problem, it keeps failing at sboot.bin
Click to expand...
Click to collapse
Needs to be a newer firmware with a newer BL. Your still trying to downgrade BL.
callumbr1 said:
Needs to be a newer firmware with a newer BL. Your still trying to downgrade BL.
Click to expand...
Click to collapse
When I last checked my Android versión was 7.0 and I think that was the last update the galaxy s6 had, but if you can tell me where can I get a newer firmware that would be great, also thanks for the help you have given me until now.
Afganito said:
When I last checked my Android versión was 7.0 and I think that was the last update the galaxy s6 had, but if you can tell me where can I get a newer firmware that would be great, also thanks for the help you have given me until now.
Click to expand...
Click to collapse
So the BL is like G925FXXU-S4.... G925FXXU-S5.... flash one which is higher.
https://updato.com/firmware-archive-select-model?record=FE9175C4876911E89F15FA163EE8F90B
Try this one.
Sorry for late reply