output from terminal is:
sudo lsusb -> Bus 001 Device 027: ID 0e8d:0003 MediaTek Inc. MT6227 phone
P780 bought from aliexpress. Is that phone clone or it can by detected as MT6227? I'm having troubles with flashing this phone, so it can be the reason...
Thanks for any help..
joeedit said:
output from terminal is:
sudo lsusb -> Bus 001 Device 027: ID 0e8d:0003 MediaTek Inc. MT6227 phone
P780 bought from aliexpress. Is that phone clone or it can by detected as MT6227? I'm having troubles with flashing this phone, so it can be the reason...
Thanks for any help..
Click to expand...
Click to collapse
Try windows, with windows drivers. Linux drivers are faulty!
Related
hi guys:
i don't know how my a13 tablet have lost the IMEI but i tried to write it by the terminal emulator by this command:
echo 'AT+EGMR=1,7,"IMEI_NUMBER"' >/dev/pttycmd1 but when press inter it shows :
"the number i put " is not found .
and my tab rooted
any help guys???
noob adb said:
hi guys:
i don't know how my a13 tablet have lost the IMEI but i tried to write it by the terminal emulator by this command:
echo 'AT+EGMR=1,7,"IMEI_NUMBER"' >/dev/pttycmd1 but when press inter it shows :
"the number i put " is not found .
and my tab rooted
any help guys???
Click to expand...
Click to collapse
Seems like that command is only useful for MTK devices, not Allwinner ones. Looks like this tool might help: http://forum.gsmhosting.com/vbb/f606/jurassic-universal-android-tool-v-5-0-2-a-1789957/
Unfortunately I can't provide any more assistance because I've never used the tool. Good luck!
Mobile History is:
It was Locked By T-Mobile (2BTBUS1-R), Then Try to Unlock by Third Party Box but Unlock failed .
Then it was Hang on T-Mobile Logo. Then Flash with DUMP File Read from Same 5042T another Unlocked Mobile.
After that Mobile didn't Power on still now. I tried with different DUMP File from different 5042T Mobile phone and Flash it but it show this error....
ERROR: S_SECURITY_SEC_CFG_EXT_REGION_SPACE_OVERFLOW
Need Help to Power on This Mobile to Normal Mode. any File or Boot repair system for Power on this phone?
Code:
Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MTK USB Port (COM61))
Preparing to start flash mode;
Preparing to open COM61
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 862e84969b5928568780bbfd2774d6b3
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (DA USB VCOM Port (COM5))
TRYING TO OPEN COM5;
DEVICE INFO:
BB CHIP: MT6752_S01 [CA01, 01, 6752, 05]
HW_STORAGE_EMMC: 0x504E01FE 0x34394A31 0x6E7C124B 0xE7621E79 [SIZE=0xE9B00000]
IMEI1 [OTP 0001]: 014247-00-265515-8
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5042T-2BTBUS1-R
USRDATA INFO: 0x6C000000 SIZE: 0x66880000
Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
[COLOR="Red"]ERROR: S_SECURITY_SEC_CFG_EXT_REGION_SPACE_OVERFLOW[/COLOR]
Time needed - 00:04:43
up...........
Here it is. I made a guide since I gave it a shot on my Astro.
Hello guys!
I am trying to unbrick this device but no success for now, no dload, no fastboot, no recovery, not recognized by PC, just image "your device failed to pass verification and can't be trusted" and no reaction on any buttons.
Does anybody know how to unbrick it?
@Maxnrg
Such error messages typically addionally shows "Visit this link on another device: g.co/XYZ" for example what leads to Google's help center.
Have you already visited?
jwoegerbauer said:
@Maxnrg
Such error messages typically addionally shows "Visit this link on another device: g.co/XYZ" for example what leads to Google's help center.
Have you already visited?
Click to expand...
Click to collapse
Yes i have, but "This site can’t be reached".
Looking for EDL test point.
Maxnrg said:
Looking for EDL test point.
Click to expand...
Click to collapse
CPU is not Qualcomm
This model is based on cpu SPD
I will open a topic for this model and the way to connect the test point
hi,
I was running latest Xiaomi EU rom MI10_V12.2.2.0 on twrp 3.4.2b, rom was running fine. I restarted the phone and then it stuck in fastboot...
when connecting to the pc says .
I tried to update the drivers but I'm not able to since the VID and PID are not correct. can someone help?
I've forced the driver install but nothing changed.
Can someone help please?
hi,
When I connect to the PC, unknown device appears "device descriptor failure"
when clicking on the device at events appears
"Device USB\VID_0000&PID_0002\6&8979e7d&0&2 was not migrated due to partial or ambiguous match"
problem is that the MI 10 is not recognized perhaps because USB \ VID_0000 & PID_0002 is not the correct
Can someone help please?
Hey guys,
I think I found the solution with a Windows registry hack, but I need the correct vid and pid values to be able to try it.
Can someone please check the vid and pid values and share them here?
[FIX] Unknown USB device (Device Descriptor Request Failed) Fastboot Windows 10
First of all, I have a HTC Droid DNA. I was searching for about a year. Finally I got a solution for my problem and I know some of you are still out there with no solution. The Fail Code is: Unknown USB device (Device Descriptor Request Failed)...
forum.xda-developers.com
Thanks
mituga said:
Hey guys,
I think I found the solution with a Windows registry hack, but I need the correct vid and pid values to be able to try it.
Can someone please check the vid and pid values and share them here?
[FIX] Unknown USB device (Device Descriptor Request Failed) Fastboot Windows 10
First of all, I have a HTC Droid DNA. I was searching for about a year. Finally I got a solution for my problem and I know some of you are still out there with no solution. The Fail Code is: Unknown USB device (Device Descriptor Request Failed)...
forum.xda-developers.com
Thanks
Click to expand...
Click to collapse
Hardware ID of my Mi 10 5G are:
USB\VID_2717&PID_FF48&REV_0419&MI_00
Hope it helps
Edited: If i connect Mi 10 to PC in fastboot hardware ID change to:
USB\VID_18D1&PID_D00D&REV_0100
Hello. I have an European Huawei Y7 2018, and I want to unlock its bootloader and install LineageOS, but after trying SkyEmie's script and some other scripts, I still have not found the code(every time I try a code I get "Invalid key,unlock fail, error num: 7"). Does anyone know of a better way to get it and unlock it? My IMEI code is 867239033923307, I suppose it is needed to get it.
Also, could you tell me how to install a recovery and LineageOS on it? Thanks.
1. The mentioned script authored by SkyEmie isn't suitable to your phone.
2. Install matching Huawei "Android USB Driver" if not done yet. This Huawei Driver solves all USB connection issues between Huawei Android Smartphone / Tablet and Windows 10/7/8/8.1 PC. It addresses all connection issues, be it transferring files between Huawei device and PC, or debugging over ADB/Fastboot.
jwoegerbauer said:
2. Install matching Huawei "Android USB Driver" if not done yet. This Huawei Driver solves all USB connection issues between Huawei Android Smartphone / Tablet and Windows 10/7/8/8.1 PC. It addresses all connection issues, be it transferring files between Huawei device and PC, or debugging over ADB/Fastboot.
Click to expand...
Click to collapse
I am using Linux(Bunsenlabs Lithium), and I already got ADB and Fastboot working, I can run things like "fastboot reboot" or "adb shell". I do not think that is the problem. Thanks anyway.
jwoegerbauer said:
1. The mentioned script authored by SkyEmie isn't suitable to your phone.
Click to expand...
Click to collapse
Ok, so what do I have to do then?