[64-bit][KERNEL][UBER-TC][15 Oct]Spirit.Kernel r3 [CAF]
Spirit Kernel
This kernel works on all the latest roms available which require new kernel source.
Statutory Warning: This kernel is not a feature bloated kernel like other kernels available, if you like tons of govs/io and hotplugs all in one and if you like to blow up your device, then you are at the wrong spot. This kernel will be minimal and only necessary features will be added.
A while back my users requested me to make a kernel which supports new ROMs(as few of them fail to). So I have decided to make a kernel which contains essential features along with stability and smoothness.
I will update this regularly as I have time and will add new features and fixes as well.
If you have any feature requests, don't hesitate to post it here!! I will consider if I like it
PLEASE READ
How to report a bug?
Include the following in your bug report:
The ROM you are currently using + a link to the ROM's thread
A log, preferably dmesgs or kmsgs (use Google to find out how to pull these from your device)
The version of SpiritKernel you use (=rx, e.g.r3)
Bug reports not meeting these requirements will be ignored.
NO BUG REPORTS ON EXPERIMENTAL BUILDS!
Features
This Hybrid kernel contains features from great kernel devs with like faux,franco etc, optimized for tomato to make it work.Initially there are less features but I will add much more soon
[*]Based on the Latest CyanogenMod sources
[*]CAF Patches by Abhinav
[*]Governors: stock for now
[*]Hotplug: ThunderPlug 2.5
[*]KCAL Driver by savoca
[*]Powersuspend by faux123
[*]FRandom module
[*]Adreno Idler by arter97
[*]Advanced TCP Congestion
[*]Built using UBER TC
[*]LMK Optimizations
[*]Graphite flags
[*]ANY Kernel zip
[*]And other opts
[*]TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD
TO-Do List
New Govs and I/Os
GPU OC and UC
* Recommended app for tweaking the kernel: FauxControl,Kernel Auditor or TricksterMod
How DO I flash this?
Reboot to recovery.
Install zip from SD Card.
Choose the Spirit.Kernel-rx-tomato.zip
Install and Reboot.
Changelog:
Click Me
Downloads:
Basketbuild
Source:
Github(branch:cm-12.1-amss-1.0.2)
Wiki containing changelogs,settings and more
Credits goes to these SUPERHUMAN for Inspiration and support (In no specific order)
Varun Chitre
Abhinav Jhanwar
arter97
faux123
yank55lu
savoca
cyanogen
And my supporters
And more
XDA:DevDB Information
Spirit.Kernel for YU Yureka, Kernel for the YU Yureka
Contributors
DC07
Source Code: https://github.com/DC07/spirit_msm8916
Kernel Special Features: CAF,KCAL,ThunderPlug,Adreno Idler and much more
Version Information
Status: Stable
Created 2015-10-10
Last Updated 2015-10-15
Does it support miui
DC07 said:
and if you like to blow up your device
Last Updated 2015-10-10
Click to expand...
Click to collapse
What do you mean ?
Does a bloated kernel 'blows up' device ?
baratheon16 said:
What do you mean ?
Does a bloated kernel 'blows up' device ?
Click to expand...
Click to collapse
adding unnecessary features and modifying codes without knowing anything does.
for eg. adding 4-5 hotplugs (enabled by default) and all working at once does.
Regards
Update is live.
Changelog
Dynamic FSync
ThunderCharge Control from Varun Chitre
Added Darkness governor
-OFast flags for more opt
Arch Power
vegas tcp tweak
Removed wlan.ko which was accidentally added
For more check github.
Enjoy.
Update is live
======r3=====
What's new?:
* F2FS and NTFS Support
* SWAP Support
* Enable all CPU cores while boot for quick boot
* kill some logspam
Changelog:
a47e11c spirit: use all cores on-boot for faster bootup
184bd1a moar changes
addc11d spirit: rework build script and bump to r3
9d5f29e spirit: add changelog.sh
52fcf5b spirit: Add NTFS Support
031757e Revert "dts : use all cores on-boot for faster bootup"
19b2c34 spirit: enable swap
701bcef mm: page_io.c: remove write error messages for swap devices
db6f10b mm/zswap: NUMA aware allocation for zswap_dstmem
122a852 mm/zswap.c: remove unnecessary parentheses
a37407a mm/zswap: support multiple swap devices
fa8792d mm/zswap.c: update zsmalloc in comment to zbud
58374d9 mm/zswap.c: fix trivial typo and arrange indentation
b1a1ec6 mm/zswap.c: change params from hidden to ro
2d81f29 mm/zswap: refactor the get/put routines
a664710 vnswap: integrate vnswap from Samsung
0a12121 mm/zswap: bugfix: memory leak when invalidate and reclaim occur concurrently
431421d mm/zswap: avoid unnecessary page scanning
4eeb42b mm/zswap: bugfix: memory leak when re-swapon
9a8de22 mm/zswap: use postorder iteration when destroying rbtree
65a7d5a mm/zswap.c: get swapper address_space by using macro
8af692f dts : use all cores on-boot for faster bootup
10b0414 spirit: updates to build.sh
699223a tomato: Enable f2fs
7986854 arm64: Kill logspam
Download: https://basketbuild.com/filedl/devs?dev=DC07&dl=DC07/Spirit/tomato/Spirit.Kernel-r3-20151015.zip
=====r3=====
Enjoy.
can we flash this on stock yureka rom! cm 12.1??
rishivg said:
can we flash this on stock yureka rom! cm 12.1??
Click to expand...
Click to collapse
It won't work on stock COS.
It works on AOSP and CM based roms
does it work for yureka plus?
does it work in blisspop rom
adamnp2000 said:
does it work in blisspop rom
Click to expand...
Click to collapse
Yea... It does... I am using it right now with blisspop
kdhupar0 said:
does it work for yureka plus?
Click to expand...
Click to collapse
yes, it does
Can you give us a daily usage setting for the kernel, please?
fanatic75 said:
Can you give us a daily usage setting for the kernel, please?
Click to expand...
Click to collapse
Check op
Work with cm13 ?
Any update @DC07?
Sent from my AO5510 using Tapatalk
This kernel is good but yureka plus is too damn slow on darkness governer.. Have to keep it on performance.. Any settings for a balanced usage without lags and good battery backup??
Thanks for the kernel.. ??
Does it supports MIUI 7?
Pls add 2.0ghz oc
DC07 said:
It won't work on stock COS.
It works on AOSP and CM based roms
Click to expand...
Click to collapse
So not compatible with Stock CM12.1 rom
Correct
Related
** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi Guys!
Thanks to one of my coworker at work which had no further usage for his Note 8 GT-N5110 i had recently the possibility to call it my own! I was very happy about that but what i instantly missed after powering on the device for the first time was the great boeffla kernel which runs very well on my S3 for quite some time now. So i decided to "route" some spare time into porting the boeffla kernel for n801x devices to n51x0 devices. After a „couple of days“ and after fighting around with git, merging things and stuff i can enjoy now the power of boeffla on this device too! Finally i want to share this kernel with the ones who maybe missed boeffla on a Note 8 too and of course with all others which maybe want to give it a try.. As it is pretty much complete and i didn't want to reinventing the wheel i did (in agreement with Lord Boeffla!) a shameless copy of his text from the n8x0 thread and changed the relevant parts for this version. It is and it should stay a Boeffla Kernel so i think it's not that “blasphemic” if i copy the Lord himself. btw. all credits to him!!
This is the thread about the ported version of the Boeffla-Kernel for Galaxy Note 8 n51x0 devices
Some of you might know Lord Boefflas kernel already from the Galaxy S3 area.
If you want to learn more about the kernel, it's features and how to configure what, I would recommend you to visit the Galaxy S3 thread of the kernel.
Notes:
This kernel (provided in separate images) should work on the following devices:
GT-N5110 (Wifi only), GT-N5100 (G3 modem) and GT-N5120 (G4/LTE modem) Only GT-N5110 versions are tested by me as i have no possibility to test the others! So feedback about how the kernel is working on a GT-N5100 and GT-N5120 would be highly appreciated, thx!
The kernel images are only for Samsung based Jelly Bean (Android 4.2.2) or Kit Kat (Android 4.4.2) roms!!! Do not install it on CM or AOSP based roms!!!
Kernel versions 1.x are only for Samsung based Jelly Bean 4.2.2 roms!!!
Kernel versions 2.x are only for Samsung based Kit Kat 4.4.2 roms!!!
Custom Roms:
This Kernel is not compatible with the yNote ROM because of modifications related to init process and removing SELinux!! But it should work for example with stock based custom roms like civatos CivZ roms!
WARNING: Be sure that u flash the right kernel for the right device !! Images are named accordingly so double check that u use the right one! Flashing a wrong version may brick your device !!
If you have questions to settings, presets, others configuration and wanna share your configuration, head over to the unofficial Boeffla-Config App Config sharing thread: http://forum.xda-developers.com/show....php?t=2621308
Support
First read the FAQ section on the Homepage (offline, project EOL) !!!
Click here (offline, project EOL) to learn about all possible kernel settings in the config app.
Click here (offline, project EOL) to learn about using the config app.
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Features
* To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from here: DOWNLOAD (offline, project EOL)
* Upstreamed to Linux 3.0.101 (www.kernel.org)
* Based on Samsung source code GT-N5110_JB_Opensource_Update2/GT-N5110_KK_Opensource.zip and current CM12.x sources
* Initramfs from XXCMK1 (for all JB builds) stock kernels
* Initramfs from XXDNI2 (for KK n5110 builds) stock kernel
* Initramfs from XXDNH3 (for KK n5120 builds) stock kernel
* Initramfs from XXDNL5 (for KK n5100 builds) stock kernel
* Initramfs from official CyanogenMod roms for all CM versions (in "pre-anykernel" images)
* CPU under/overclocking to from 100 Mhz to 1920 MHz
* CPU undervolting interface
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Configurable charger rate for AC and USB (default increased to 1100 mA for ac charging)
* Charge info display support
* Configurable zRam
* Configurable touch boost frequency
* Configurable early suspend time (for screen off animations, 100ms default)
* Boeffla-Sound engine V1.6.7 to unleash the power of the audio hub wm1811
* Additional governors: ZZMoove 1.0 beta8, pegasusqplus,smartassv2, intelliactive, lulzactiveq and wheatley
* Governor profiles for pegasusq, pegasusqplus and zzmoove for performance, battery saving etc.
* Additional schedulers: ROW, ZEN, BFQ (v7r8) and SIO
* Schedulers configurable separate for internal and external SD memory
* Hardcore speedmod sharpness fix implemented (default is off)
* SD card read ahead buffer configurable separate for internal and external SD memory (default increased to 256 kB)
* Ext4 File system tweaks (default to on, can be disabled)
* System Tweaks predefined supported (default is off)
* WIFI Multicast filter for better battery life
* WIFI wakelock times reduction
* Proportional rate reduction for TCP
* TCP congestion changed from Cubic to Westwood
* Wifi mac address change support
* Dynamic fsync 1.2 implemented
* Timeout for external SD card changed to improve handling of crappy SD cards
* Custom boot animation support
* Swap supported (but not recommended, use zRam instead)
* init.d support (in /system/etc/init.d - set correct permissions! No support for Zipalign scripts for good reasons!)
* NTFS (read-only access only!) compiled as a module
* CIFS compiled as a module
* NFS compiled as a module
* XBox controller support as module
* USB OTG Ethernet (Asix) support as module
* exFat support switchable (switch it off if you do not need it)
* Battery monitor wakelocks reduced
* Kernel can root if required (create file "autoroot" on internal sd and reboot)
* Android logger can be disabled
* Kernel logging can be disabled
* Disabled various debug logs and traces
* Frandom compiled as a module (for mods like Crossbreeder)
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Compiled with Google arm 4.8 toolchain
* Internal kernel busybox version 1.24.1
* Added support for broken m5c73m3 camera firmware
* Fixed non-working MDNIE negative mode (change in v2.x for KK only)
* WiFi working on JB bootloader! (related to v2.x for KK only)
* Support for external USB web cams enabled
* Mali driver updated to r3p2 rel4 (related to v2.x for KK and all CM12.x, CM13.x, LOS14.1)
in addition added by me ZaneZam (partially taken from civatos SphereEngine and SphereKat projects – thx and credits to him!):
* Configurable touch to wake with S-Pen Support (JB+KK+CM12.x+CM13.x+LOS14.1)
* Implemented double-tap-to-wake (aka knockon - this is NOT how the LG G2 works, it just replaces
the single tap in existing touch wake by a double tap) (JB+KK+CM12.x+CM13.x+LOS14.1)
* Strip the Wireless modules of debugging for size (JB+KK+CM12.x+CM13.x+LOS14.1)
* Brought back Triangle Away Support (JB+KK)
* Added intelligent writeback (JB+KK+CM12.x+CM13.x+LOS14.1)
* Update battery driver to work correctly on JB bootloader (fixed LPM mode - change in v2.x for KK only and might not work on every system!)
* SELinux included full compatibility and set to enforcing like in stock roms as default (change in v2.x for KK and all CM12.x+CM13.x+LOS14.1)
* Mobicore included (change in v2.x for KK only)
* Added new GPU control interface (5 frequencies and voltages) for new mali drivers (change in v2.x for KK+CM12.x+CM13.x+LOS14.1 only)
* Added support for 'fun with resistors' (http://forum.xda-developers.com/showthread.php?t=820275) (JB+KK+CM12.x+CM13.x+LOS14.1)
* Added missing Samsung SideSync USB Gadget (JB+KK+CM12.x+CM13.x+LOS14.1)
* Added Support for USB keyboard app (CM12.1+CM13.x+LOS14.1)
* Added Intelli Plug and use that instead of native kernel hotplug support for legacy governors (JB+KK+CM12.x+CM13.x+LOS14.1)
(=Hotplug support for all non-hotplug-able governors via included intelliplug v1.6 and this will be enabled when switching to such a governor)
Special Note 8 Info:
* S-Pen Alignment fix included (By original JB Samsung/CM Sources and also added to KK Sources)
* Memory Leak fixes included (By original JB+KK Samsung and CM Sources)
* Added Security fix CVE-2013-6282 (CM12.1)
* Added Security fix CVE-2015-3636 (CM12.1)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de (offline, project EOL)
want to live on the edge?
checkout Unoffical Boeffla Kernel Linaro Builds
Lord Boefflas Objective
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
I will, also in future, only add features that make sense to me personally as well and are not against my initial objectives. You can always raise your wishes and requests, however there is absolutely no guarantee it will be implemented.
Quote Lord Boeffla:
This said, I will definitely NEVER implement:
dual boot (I do not need it)
f2fs - it is known to cause various issues and compatibility problems
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it. Everything else I am happy to check and decide.
Click to expand...
Click to collapse
So i (ZaneZam) won't do that either but all the things Lord Boeffla decides to implement in the future will of course find their way into this kernel as long as it is possible to implement them plus/minus some little things i might find useful for the Note 8 devices but at the end always respecting Lord Boefflas Objective!
Compatibility
To reiterate it again: This kernel is only for Samsung based Jelly Bean (Android 4.2.2) and Samsung based Kit Kat (Android 4.4.2/GT-N5100 4.4.4) firmwares. Since 26.04.15 there are also CM12.x,CM13.x,LOS14.1 versions available. It is not designed to run on AOSP based roms!
SPECIAL NOTE ABOUT NEWER STOCK ROMS: to be able to use the KitKat kernel builds with newer roms like XXDNH2 or XXDNH3 stock roms or based ones u will need to patch your rom beforehand. due to mali API changes in these roms booting with custom kernels isn't possible. so you can now checkout and install civatos fix HERE (many thx and credits to him!) after patching the rom the kernel should boot fine! <-- 10.04.15 since kernel version 2.2 obsolete as it has been "fixed" in the kernel itself. nonetheless if u still face issues with newer roms then u can use civatos method in addition but for now it's not needed to boot the kernel on newer roms.
Kit Kat 4.4.4:
Since version 2.1 stable this kernel is compatible with the XXDNL5 rom for GT-N5100 devices.
CM12.x:
Since 26.04.2015 there are also CM12.0 and CM12.1 versions for GT-N5100 and GT-N5110 devices available. these are compatible with offical CyanogenMod 12.x roms and based ones.
CM13.x:
Since 17.04.2016 there are also CM13.0 versions for GT-N5100 and GT-N5110 devices available. these are compatible with offical CyanogenMod 13.0 roms and based ones.
Since 01.05.2016 there are also CM13.0 versions for GT-N5120 devices available. these are compatible with offical CyanogenMod 13.0 roms and based ones.
LineageOS 14.1:
Since 13.01.2017 there are also LineageOS/CM14.1 versions for GT-N5100, GT-N5110 and GT-N5120 devices available. these are compatible with offical LineageOS 14.1 roms and based ones.
Note: You need at least version 2.4.19 of Boeffla-Config V2 to allow all functionalities to be available.
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from here: DOWNLOAD (offline, project EOL)
Donation
If you like my work, feel free to donate via XDA developers: Donation-Link or via link on Homepage (offline, project EOL)
Or, just purchase the donation version of the Boeffla-Config app, which also gives you some extra features.
Yeah go on folks donate for this great Dev!! :good:
Source code
All sources can be found in my Github repository: https://github.com/zanezam
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* Andip71
* Yank555
* Hardcore
* Chainfire
* DerTeufel
* Harunjo
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Supercurio
* Mialwe
* Entropy512
* Faux123
* civato
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
And special thanks from me to my friend Andi for letting this kernel-port exist „under his hood“ by providing it on his homepage and for supporting it in his Config App! Appreciate that much!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in CWM recovery and safely store your personal data before you flash a new kernel.
One last important note from me ZaneZam:
This is a contribution to the Boeffla Kernel project and not my own project! This port was made in agreement with Lord Boeffla but not by himself! I will support this ported version as good as i can, Lord Boeffla will not as he doesn't support versions for devices he doesn't own! So please if you have device specific questions ask them here and not in any other boeffla kernel thread, thanks!
Cheers and now enjoy the power of Boeffla on the Note 8!
ZaneZam
reserved 1
reserved 2
reserved 3
Give this guy his cookie, can't wait till Samsung releases the KK kernel source to try this baby out.
yeah i'm waiting too to be able to start from scratch
Been waiting for this thank you.....tested kernel on civatos rom, works great no issues at all.battery life and performance are great. Boffella sound is awesome and the boffella config gives a little more control over audio than just boffella sound. Would love to see a aosp kernel with these features since no current 4.4.2 aosp or cm kernels have boffella sound working. I downgraded from 4.4.2 for this kernel and happy I did.... Thanks
Have flashed it on my N5100 running latest X-Note ROM.
After first flash, my screen was flickering.
Then I did cache and dalvik wipe and flashed again.
Now no flickering any more, but my GSM doesn't work any more.
So back to civz kernel.
Gesendet von meinem GT-N5100
blowy666 said:
Have flashed it on my N5100 running latest X-Note ROM.
After first flash, my screen was flickering.
Then I did cache and dalvik wipe and flashed again.
Now no flickering any more, but my GSM doesn't work any more.
So back to civz kernel.
Gesendet von meinem GT-N5100
Click to expand...
Click to collapse
first of all thx for your braveness *gg* and thx for the report!
as said unfortunately i cannot test versions other then the N5110, so i rely on your reports.
but maybe i can pinpoint the problem with your help at least if you still are willing to help,
that would be great but also isn't a problem if u refuse
another one with such a problem on GT-N5100 or GT-N5120?
ZaneZam said:
first of all thx for your braveness *gg* and thx for the report!
as said unfortunately i cannot test versions other then the N5110, so i rely on your reports.
but maybe i can pinpoint the problem with your help at least if you still are willing to help,
that would be great but also isn't a problem if u refuse
another one with such a problem on GT-N5100 or GT-N5120?
Click to expand...
Click to collapse
One thing I noticed that is very important to me is docking mode is no longer supported with this kernel. Switch to civatos kernel it works again.dock mode supports USB host charging and HDMI at the same time all u need to do is place a 65k resistor between Id pin and ground on ur USB host cable.....very important to me since tablet is used in my car as a head unit... I'd appreciate any help.Maybe s3 uses a different resistance?
b3ltazar said:
One thing I noticed that is very important to me is docking mode is no longer supported with this kernel. Switch to civatos kernel it works again.dock mode supports USB host charging and HDMI at the same time all u need to do is place a 65k resistor between Id pin and ground on ur USB host cable.....very important to me since tablet is used in my car as a head unit... I'd appreciate any help.Maybe s3 uses a different resistance?
Click to expand...
Click to collapse
actually to be as near as possible to boeffla kernel I didn't activate it in config but will check that for u and maybe we have an beta 2 soon!
I appreciate that . I really want to get into kernel dev. I built a few windows 7 moded os. But seems u need Linux experience I only have some backtrack experience. Thanks for the reply. I'm always open to testing
b3ltazar said:
Been waiting for this thank you.....tested kernel on civatos rom, works great no issues at all.battery life and performance are great. Boffella sound is awesome and the boffella config gives a little more control over audio than just boffella sound. Would love to see a aosp kernel with these features since no current 4.4.2 aosp or cm kernels have boffella sound working. I downgraded from 4.4.2 for this kernel and happy I did.... Thanks
Click to expand...
Click to collapse
So you know my JB kernel also support Boeflla.
Second I'm test building Kitkat kernel.
Already working is:
Exfat
Cifs
Wifi
Cpu OC up to 1.92GHz and UC to 100MHz
CPU voltage control
S_Pen alignment fixed
RTL28.. USB modem support
Various Fixes in memory leaks
DynamicFsync
ZZmoove & lulzactive governor added
row, vr, sio shedulers added
and all of this without samsung source thanks to a help full eye of one of my users
More to come...........public release?
civato said:
So you know my JB kernel also support Boeflla.
Second I'm test building Kitkat kernel.
Already working is:
Exfat
Cifs
Wifi
Cpu OC up to 1.92GHz and UC to 100MHz
CPU voltage control
S_Pen alignment fixed
RTL28.. USB modem support
Various Fixes in memory leaks
DynamicFsync
ZZmoove & lulzactive governor added
row, vr, sio shedulers added
and all of this without samsung source thanks to a help full eye of one of my users
More to come...........public release?
Click to expand...
Click to collapse
thx for the info civato, i think he knows that already as he used/uses your kernel btw i was going to contact you about your JB sources as i missed an updated repo in your github account, or am i blind? could u please give me some hint? and here again: thx for all your work! :good:
[*]and all of this without samsung source thanks to a help full eye of one of my users
Click to expand...
Click to collapse
-> very interesting!
ZaneZam said:
thx for the info civato, i think he knows that already as he used/uses your kernel btw i was going to contact you about your JB sources as i missed an updated repo in your github account, or am i blind? could u please give me some hint? and here again: thx for all your work! :good:
-> very interesting!
Click to expand...
Click to collapse
Yep sorry I noticed that 4.2.2 kernel source hasn't been updated, just no time.
When I finish my KitKat kernel I will upload the source to github.
Will try to do that this weekend.
yeah i know that "time thingy" very well! thx looking forward to your update.
ZaneZam said:
yeah i know that "time thingy" very well! thx looking forward to your update.
Click to expand...
Click to collapse
Still running this kernel working good. Battery life is amazing. Hopefully u can get docking mode figured out when u have time.
I'm surprised there aren't more people interested in this kernel. Give it a try with civs 4.2.2 build u won't regret it.
New Version v1.0 beta2 available!
Hi Guys,
a new beta is available!
as usual you can get it HERE or via Load & Flash functionality in Boeffla Config App
Changelog:
Version 1.0-beta2
22.06.2014
Update to zzmoove 0.9-beta2 (ZaneZam)
Speedup late resume for faster wakeup of the device (credits to Yank555)
A few performance tweaks (Lord Boeffla)
Fix n_tty_write crash when echoing in raw mode (Lord Boeffla)
Update su to version 2.00 (Lord Boeffla)
Update to latest changes in Boeffla ramfs (ZaneZam)
Fix compatibility issues by changing Samsung ramfs to the original n5100/n5120
(XXCMK1) rom versions (ZaneZam for n5100 and n5120 builds)
Enable audio/smart dock mode for MAX77693 chip to support 'fun with resistors'
(http://forum.xda-developers.com/showthread.php?t=820275) (ZaneZam)
enjoy!
ZaneZam said:
Hi Guys,
a new beta is available!
as usual you can get it HERE or via Load & Flash functionality in Boeffla Config App
Changelog:
Version 1.0-beta2
22.06.2014
Update to zzmoove 0.9-beta2 (ZaneZam)
Speedup late resume for faster wakeup of the device (credits to Yank555)
A few performance tweaks (Lord Boeffla)
Fix n_tty_write crash when echoing in raw mode (Lord Boeffla)
Update su to version 2.00 (Lord Boeffla)
Update to latest changes in Boeffla ramfs (ZaneZam)
Fix compatibility issues by changing Samsung ramfs to the original n5100/n5120
(XXCMK1) rom versions (ZaneZam for n5100 and n5120 builds)
Enable audio/smart dock mode for MAX77693 chip to support 'fun with resistors'
(http://forum.xda-developers.com/showthread.php?t=820275) (ZaneZam)
enjoy!
Click to expand...
Click to collapse
Just to make sure, this still doesn't support TW KitKat Roms? I read in the OP that is for jellybean roms.
DedS v2
Note:
I'm not responsible if your phone explodes due to overheating or you have to take your phone to the service centre,because it got bricked. You are willing to try this kernel:good:
Click to expand...
Click to collapse
DedS v2 is the second release of DedS kernels. This time it's more tweaked,fast and best-in-class performance
FEATURES:
*CPU Governorserformance,Powersave,Conservative,Interactive,Ondemand,Hybrid, adaptive,Intellidemand,Intelliactive
*CPU I/O Schedulers:Noop,Deadline,CFQ,Sio,FIOPS,BFQ
*GPU Governors:Simple Ondemand,Performance,Powersave,Userspace,Adreno TZ
*GPU Overcloked @533MHz
*F2FS filesystem support
*Asynchronous FileSync ported from HTC One(Thanks to @faux123)
*IntelliPlug Hotplug driver.
*Kernel compressed with LZ4.
*Powersuspend kernel driver (read FAQ)
*Dynamic management of dirty page writebacks
*Frandom.Read more about it here
*O3 Optimizations
*Many performance tweaks
*Kernel version 3.4.98
Click to expand...
Click to collapse
DOWNLOADS:
From v2.2 onwards there will be 2 versions, m-mainline and e-experimental
From v2.0,all downloads will be available here:
http://www.androidfilehost.com/?w=files&flid=16993
Click to expand...
Click to collapse
Sources:
https://github.com/Ateekujjawal/DedS_4.4_ms013g
If anyone wants to add this kernel in their rom, they are free to do so,but please post the sources and a link to this thread!!!
If anyone wants to revert back to stock kernel, flash this through ODIN.
Credits Section:
@leo811: For informing me of the kernel sources on time
@shabbypenguin: For his 4.4 dtb files
@h0rn3t: For performance control app
Changelogs on post #2
FAQ on post #3Enjoy the kernel everyone!!! I hope you like it
XDA:DevDB Information
DedS kernel v2, Kernel for the Samsung Galaxy Grand 2
Contributors
##W4TCH0UT##
Kernel Special Features: Here is the second release of DedS kernel
Version Information
Status: Stable
Current Stable Version: 2.2
Stable Release Date: 2014-07-27
Created 2014-07-24
Last Updated 2014-08-06
Reserved
CHANGELOGS:
|======================|
VERSION v2.3e:
*Added Intellidemand,Intelliactive governors
*Added IntelliPlug Hotplug driver
*Added F2FS filesystem support(Read FAQ)
*Asynchronous Fsync ported from HTC devices
*Kernel compressed with LZ4
*Linux 3.4.99
=============
VERSION v2.2m:
*Added sweep2wake and doubletap2wake(Read FAQ)
*GPU tweaks
*Add adaptive governor
*Add BFQ I/O Scheduler.
*Added UKSM(Read FAQ)
*Removed CPU OC(CPU UC is still included)
VERSION v2.2e:
*Added sweep2wake and doubletap2wake(Read FAQ)
*GPU tweaks
*Add adaptive governor
*Add BFQ I/O Scheduler
*Added UKSM(Read FAQ)
*Removed CPU OC(CPU UC is still included)
*Added powersuspend(Read FAQ)
*Dynamic management of dirty page writebacks
*Some performance tweaks
================
VERSION v2.1:
*Added CPU Overclocking upto 1.6Ghz and CPU Underclocking up till 96Mhz
*GPU Overclocked @533mhz
*Added Simple GPU Algorithm for better performance
*Added many performance tweaks
================
VERSION v2.0:
*Initial release
|======================|
Reserved
FAQ:
Q:What is the performance control app?
ANS:I have included this app to tweak the kernel settings efficiently. You can enable everything you want.
Q:What's the difference between m(mainline) and e(experimental) versions?
ANS:M builds are made for performance and battery and only include necessary features. E builds are meant for experimentality and they include M features+Many experimental features. E builds have many tweaks but it might drain your battery. E builds might not even boot, so flash at your own risk and take a backup before flashing.
Q:What is F2FS?
ANS:F2FS is a file system exploiting NAND flash memory-based storage devices, which is based on Log-structured File System (LFS). The design has been focused on addressing the fundamental issues in LFS, which are snowball effect of wandering tree and high cleaning overhead.
Q:What is UKSM?
ANS:UKSM is the highest version of KSM available for kernel 3.4, which deals with merged pages effectively. Kernel SamePage Merging (KSM)lets the hypervisor system share identical memory pages amongst different processes or virtualized guests.
Q:What is sweep2wake/doubletap2wake?How to enable/disable it?
ANS:Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the screen. This feature might not work at all times, so please don't complain.
To enable sweep2wake, go to sys/android_touch/sweep2wake from any root browser and enter whichever value you want(values given below):
Code:
0=disabled
1=enable sweep2wake (default)
2=enable sweep2wake with backlights
To enable doubletap2wake, go to sys/android_touch/doubletap2wake from any root browser and enter whichever value you want(values given below):
Code:
0=disabled
1=enable doubletap2wake (default)
Q:What is LZMA/XZ/LZ4...compression method?
ANS:It is basically the algorithm used for compressing the kernel. For now, I use LZMA.
Q:What is powersuspend?
ANS:It is a new kernel driver which replaces Earlysuspend and works without it.
Click to expand...
Click to collapse
Hope I cleared everything, Any questions left out, just ask them, Cheers!!!
does it have bln and swipe2wake support???
manan001 said:
does it have bln and swipe2wake support???
Click to expand...
Click to collapse
I'm quite busy with other kernels right now, so I'll add it by tomorrow or day after tomorrow, and adding those features is not so easy. And I already told you bln needs ROM support also.
Sent from my GT-I9082 using Tapatalk
Rom is already supported
##W4TCH0UT## said:
DedS v2
Note:
DedS v2 is the second release of DedS kernels. This time it's more tweaked,fast and best-in-class performance
FEATURES:
DOWNLOADS:
Sources:
https://github.com/Ateekujjawal/DedS_4.4_ms013g
Credits Section: @leo811: For informing me of the kernel sources on time.
@shabbypenguin: For his 4.4 dtb files
Changelogs on post #2
Enjoy the kernel everyone!!! I hope you like it
XDA:DevDB Information
DedS kernel v2, Kernel for the Samsung Galaxy Grand 2
Contributors
##W4TCH0UT##
Kernel Special Features: Here is the second release of DedS kernel
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2014-07-24
Created 2014-07-24
Last Updated 2014-07-24
Click to expand...
Click to collapse
Does it supprts otg cable?
vipulm15 said:
Does it supprts otg cable?
Click to expand...
Click to collapse
Nope and please don't quote whole op.
VERSION v2.1 released:
*Added CPU Overclocking upto 1.6Ghz and Underclocking up till 96Mhz
*GPU Overclocked @533mhz
*Added Simple GPU Algorithm for better GPU performance
*Many net speed and performance tweks
Now,i'm working on s2w/dt2w. Enjoy the new release.
Wifi is not working and also the max freq is set to 1.19Ghz only
++1
anadarco7 said:
Wifi is not working and also the max freq is set to 1.19Ghz only
Click to expand...
Click to collapse
anadarco7 said:
Wifi is not working and also the max freq is set to 1.19Ghz only
Click to expand...
Click to collapse
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Stock kernel, if anyone wants to revert, simply flash through ODIN.
Stock kernel
##W4TCH0UT## said:
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Click to expand...
Click to collapse
As discussed with khasim wifi was working in 2.0 perfectly..
I did not have wifi so couldn't test..
manan001 said:
As discussed with khasim wifi was working in 2.0 perfectly..
I did not have wifi so couldn't test..
Click to expand...
Click to collapse
I made one commit to improve WiFi speed, so I think that's affecting it. I'll revert it.
Sent from my GT-I9082 using Tapatalk
Frankly speaking these all does not affect speed as after all it all depends on once internet speed.. ?
wifi
##W4TCH0UT## said:
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Click to expand...
Click to collapse
1) In the previous release (2.0) it working perfectly.
Instead, with new release (2.1), I can't turn on the wifi.
##W4TCH0UT## said:
1)Was it working in the previous release?
2)Also is under clock working?
I didn't add settings for over clock, I thought it would work.. I'll see to the overclock thing.
And please attach a logcat, when reporting these issues.
Click to expand...
Click to collapse
Wifi working in 2.0 .Let me know how to get the logcat
Sent from my SM-G7102 using XDA Free mobile app
from playstore you can use logcat builder
https://play.google.com/store/apps/details?id=org.jtb.alogcat&hl=en
logcat for Wif issue
l0rdelric said:
1) In the previous release (2.0) it working perfectly.
Instead, with new release (2.1), I can't turn on the wifi.
Click to expand...
Click to collapse
From Logcat Extreme:
E WifiHW: ######### set firmware type 0 ######
return of insmod : ret = -1,Exec format error
WifiStateMachine: Failed to load driver
WifiStateMachine: sendErrorBroadcast code: 10
E WifiController: Wi-Fi driver is unstable. Received CMD_STATEMACHINE_RESET
Features:
Based on Chroma Kernel (special credit for TomorrowLand_Ace work)
Blu_active Default Governor
Blu_plug - CPU Hotplug (removed Franco hotplug)
FIOPS I/O Scheduler
Enabled Overclocking CPU & GPU
Undervolted GPU
Build on Ubuntu 14.10
Kernel is secure
Compiled with lastest UBERTC 4.9.3, -O3 flags (GPU included), Graphite, hardfloat, and many other otimizations
FauxSound
PowerSuspend Driver
MSM Sleeper
Battery Life eXtender
LCD KCAL (Last version from @savoca, can't be tuned from any kernel manager for now)
Init.d Support
USB OTG
LZ4 (for a faster boot)
S2W / DT2W
Wake Gestures (huge thanks to @flar2)
Stereo Call Recording
Removed a lot of debug
Some Features from 3.7+ linux kernel
Upstream with Linux kernel .00
Full F2FS support (need to mod ramdisk to make it work, will make it automatic later)
Lots of optimizations from CAF, CM, and other kernels around xda
Main idea: Greatly patched kernel with the best governor, I/O scheduler and hotplug built with UBER toolchain.
Download for Lollipop 5.1
MOD EDIT, Download removed, rule 12 @gregbradley
Credits:
@TomorrowLand_Ace
@eng.stk
@franciscofranco
@faux123
@flar2
@show-p1984
@neobuddy89
@savoca
@RIPng
Source
If you want to support student and his work:
XDA:DevDB Information
Crystal Kernel, Kernel for the Google Nexus 5
Contributors
mastero9017
Source Code: https://github.com/mastero9017/hammerhead
Kernel Special Features:
Version Information
Status: Stable
Created 2015-04-03
Last Updated 2015-04-03
Reserved.
Where is the download link.? Can't open
Zonkoprince said:
Where is the download link.? Can't open
Click to expand...
Click to collapse
Fixed, link is under clickable Mediafire.
What app i should use to customise?
Zonkoprince said:
What app i should use to customise?
Click to expand...
Click to collapse
I suggest Kernel Auditor.
Kinda wondering could you maybe add some features from this kernel thread?
http://forum.xda-developers.com/showthread.php?t=2845768
It has nexus 5 kernel too but the devs mainly focused on n4 so maybe you could make the n5 version of it especially the 5.1 version. If it is allowed by the devs. Since the last commit is 2 months old and no new updates for 2 months
JJsevol said:
Ah makes sense now.
@mastero9017 are there any other changes you made from chroma besides the blu changes and toolchain? Liking the kernal so far :good:
Click to expand...
Click to collapse
Everything is listed in OP. I'm not sure yet about future of this kernel. TomorrowLand_Ace will provide great patches for kernel itself and i will try to port changes to blu modules from shamu and tweaks some values, flags, etc
Thread temporarily closed whilst I look in to the multiple reports made
@eng.stk has explicitly said that you have not got permission to share his work.
Download removed, thread remains closed
This is my Caramel Kernel for the Redmi 2/Pro Xiaomi. It's based off the CM kernel available on CyanogenMod's GitHub. Flash it using TWRP. Bug reports and contributions are welcome.
Disclaimer:
This kernel is provided AS-IS, with no warranties. I am not responsible for bricking your device. Flash at your own risk.
Features:
Increase zRAM devices
Improves on square root algorithm
Compiled with Linaro 4.9 GCC generic
Fixes and improves on ipv6 protocol
Optimized some operations for the good xperience
Some patches from CAF for fix issues
Use lz4 zRAM
Special clean up
VFP and neon optimizations
MSM Hotplug
Shed optimizations
Silence log spam
Add optimized SHA
Minor cleanups
Some improves for performance
Faux Sound Control 3
Kcal control
Release history:
Code:
r1: March 25, 2016
- Initial public release
r2: March 27, 2016
-Special improves in zRAM
-Use of lz4 zRAM
-Added MSM Hotplug
-Added support for Neon Mode
-Clean up some dead code
-Removed obsolet code from zsmalloc and zRAM
r3: May 11, 2016
-Shed optimizations
-Silence log spam
-Add optimized SHA
-Minor cleanups
-Some improves for performance
r4: May 13, 2016
-timer: apply_slack() optimization
-qpnp-vibrator: Add Vibrator Control
-Add Faux sound control 3
-Asynchronous I/O latency to a solid-state disk greatly increased
-fs: reducing vfs cache pressure
-mdss : add MDSS Advanced Color Control (formerly KCAL)
r5: May 14, 2016
-cpufreq: Add lionfish governor v1.1
-Reduced wakelocks
-Speed up console framebuffer imageblit function
-sched/rt: Reduce rq lock contention
-Writeback: Fix occasional slow sync
-usb: add usb fast charge
-sched/fair: Fix fairness issue on migration
-Added SIO ioshed
r6: May 18, 2016
-sched: enable HMP-aware task placement
-improves on CRC
-sched/fair: Implement fast idling of CPUs
-Optimized ARM RWSEM algorithm
-Support of GCC 5
-Fixed some problems with GCC 5
-Building with Uber 5.3
Download:
Lastest release
XDA:DevDB Information
Caramel Kernel, Kernel for the Xiaomi Redmi 2
Contributors
TechnoAnder
Source Code: https://github.com/Ander-Alvarez/android_kernel_cyanogen_msm8916
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r6
Stable Release Date: 2016-05-18
Created 2016-03-25
Last Updated 2016-05-18
have you tried it?
I don't tried it buy my tester yes. He says that it works perfect and He don't found issues. Enjoy!
Works on what ROM? Cyanogenmod only? If so, what CM? 12.1 or 13? Give at least details about it.
hardsonic said:
Works on what ROM? Cyanogenmod only? If so, what CM? 12.1 or 13? Give at least details about it.
Click to expand...
Click to collapse
sorry, i forget say it. this kernel work on cm-13.0 and may be on aosp mm.
remember that you contributions are welcome, any issue that you have with this kernel report from here for find the fix, enjoy!
Please build kernel in miui or cm11 ??
where is the hotplug section in kernel audiutor??
add some hotplug..phone heat up pretty fast..
ibal97 said:
where is the hotplug section in kernel audiutor??
add some hotplug..phone heat up pretty fast..
Click to expand...
Click to collapse
In the next release I will add hotplug.
TechnoAnder said:
In the next release I will add hotplug.
Click to expand...
Click to collapse
nice..waiting for the next build..I can be a tester if you want..
Caramel Kernel r2
In this release im focused on the good performance of Android MM. Some features as the use of lz4 increase the speed and increase the battery performance; also the clean up of multiple dead code help to delete the lag on Android, some optimizations as Kernel mode neon and VFP optimizations give to Android an good xperience, the r2 works perfect, if you have any issue tell me here, ah and other good feature added is the MSM Hotplug from Qualcomm, enjoy it users!!!
DOWNLOAD: here
TechnoAnder said:
Caramel Kernel r2
In this release im focused on the good performance of Android MM. Some features as the use of lz4 increase the speed and increase the battery performance; also the clean up of multiple dead code help to delete the lag on Android, some optimizations as Kernel mode neon and VFP optimizations give to Android an good xperience, the r2 works perfect, if you have any issue tell me here, ah and other good feature added is the MSM Hotplug from Qualcomm, enjoy it users!!!
DOWNLOAD: here
Click to expand...
Click to collapse
everything looks good now ...less heat produced in gaming..less lag butter smooth ui...nice improvement bro
requesting usb fast charge
tested with 1gb variant ,tesla rom
ibal97 said:
everything looks good now ...less heat produced in gaming..less lag butter smooth ui...nice improvement bro
requesting usb fast charge
tested with 1gb variant ,tesla rom
Click to expand...
Click to collapse
Awesome!! In the next Release I will add fast charge
TechnoAnder said:
Awesome!! In the next Release I will add fast charge
Click to expand...
Click to collapse
waiting for perfection.. great work bro
cant flash on cm13 latest build. successfully flash tru twrp but not sticking...
wakaranay said:
cant flash on cm13 latest build. successfully flash tru twrp but not sticking...
Click to expand...
Click to collapse
What issue is?
wakaranay said:
cant flash on cm13 latest build. successfully flash tru twrp but not sticking...
Click to expand...
Click to collapse
try to mount /system
ibal97 said:
try to mount /system
Click to expand...
Click to collapse
can you pls guide me on how to do
wakaranay said:
can you pls guide me on how to do
Click to expand...
Click to collapse
go to recovery (kumajaya built twrp 3.0. is recommended)
mount /system
install(search the kernel.zip)
swipe to flash
clear dalvik/art cache
reboot the device
then open setting ,about phone to confirm the installation
ibal97 said:
go to recovery (kumajaya built twrp 3.0. is recommended)
mount /system
install(search the kernel.zip)
swipe to flash
clear dalvik/art cache
reboot the device
then open setting ,about phone to confirm the installation
Click to expand...
Click to collapse
mount and then select/choose system only?
then go to install? am i right?
This project is now "End-of-Life" (EOL). Thanks to all of you for the kind support...
Proudly presenting, Boeffla-Kernel (unofficial) for Lineage OS-15.1/16.
/* Introduction */
This is an unofficial port of the well-known Boeffla-Kernel which is developed by the recognized developer @Lord Boeffla. Since the original developer decided to end his support with Nougat, I decided to port his awesome work to Oreo. With the permission of the original developer, here I'm sharing my builds for anyone interested.
/* Warning */
This kernel is no way supported by Lord Boeffla. Please do not bother him with anything related to this Kernel.
/* DISCLAIMER! */
Code:
I am not responsible for any damage to your device. Everything you are doing on your device is at your own risk.
I only own kltelgt (Korean variant). Hence, kernels under the category 'kltekor' are only tested by myself.
Please note that flashing any custom Kernel including mine will void your warranty.
/* Supported devices */
klte: SM-G900F, SM-G900V, SM-S902L
kltekor: SM-G900K/L/S
kltedv: SM-G900P/I
klteduos: SM-G900FD, SM-G900MD
kltekdi: SCL23
/* Compatibility */
This kernel is only meant to work on Lineage-OS 15.1/16 and nothing else. However, it may work on other LOS 15.1/16 based Oreo/Pie ROMs (Please try at your own risk).
This kernel will NOT work in Samsung Stock and other TW ROMs.
/* How-to-Install */
i. Download Kernel
ii. Go to recovery (TWRP recommend)
iii. Flash Kernel
iv. Reboot and enjoy
/* Features */
Built from Boeffla-Kernel 14.1 source code.
Merged with latest LineageOS 15.1 source code.
Built using Bleeding edge toolchain (GCC 8.2).
Added blu_active CPU governer.
All the standard features of Lineage-OS 14.1 Boeffla-Kernel
Support of anykernel concept - flash stock kernel before flashing Boeffla
Additional governors: zzmoove (Note: not considered stable at the moment, you might face reboots!!!), intelliactive, intellidemand, wheatley, smartmax, slim, intellimm, nightmare, lionheart, pegasusq Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Wake up gestures implemented (double-tap-to-wake, swipe to wake) Removed from beta-v4 onwards.
Boeffla-Sound engine (Headphones and speaker volume configurable)
Configurable vnswap
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency configurable, touch boost switch
CPU Overclocking up to 2.84 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support
Show GPU frequency usage per frequency in Boeffla-Config
Color control to adjust RGB color space + inverted mode
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported (default is off)
Android logger (logcat) configurable
Kernel logger (dmesg) configurable
Charge rates for AC charger, USB and wireless charging separately configurable (set charge rate to 0 to have stock charge logic back)
Charge information display support via Boeffla-Config V2 app
CIFS support
NFS support (module) Removed from beta-v9 onwards.
NTFS support
XBox support
OTG-Ethernet support
TCP Congestion changed to Westwood
Swap supported (but not recommended, use zRam instead)
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Insecure kernel (adb has root privileges)
Automatic EFS backup
Kernel survival mode by Boeffla-Config app to survive CM rom flashes
Full support for mpdecision for best compatibility and smoothness
(Important: use Boeffla-Config to configure min/max CPU frequencies + governors + schedulers only - or explicitely allow other apps/processes to overwrite this in Boeffla-Config settings, but expect weird side effects)
Integrated full busybox 1.23.1 (own compilation)
Auto-Root by kernel possible by request, not recommended for CM however (latest su included)
Kernel initialization log file (with the history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Always using latest Initramfs
Always based on latest Galaxy S5 sm-g900f kernel sources by CM
Kernel runs with SELinux enforcing by default, just as CM12 stock kernel for S5 - but can be configured to work in permissive mode in Boeffla-Config settings
/* Downloads */
https://smartpack.github.io/downloads/
Mirror
/* Special note to ROM developers */
You are allowed to include my kernel in any ROMs. Giving proper credits to the original developers (including me, if you considered me as one among them) are, however, highly appreciated. Feel free to contact me, if you need any assistance from my side.
/* Donations */
For those who wish to donate to the original developer (Lord Boeffla), here I'm copying his own words.
Code:
If you like my work, feel free to donate: [URL="http://www.boeffla.de/index.php/donation"]Donation-Link[/URL]
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
If you like to appreciate my (sunilpaulmathew) work, please consider a donation as it is helpful to continue my projects more active, although it is not at all necessary.
/* Acknowledgements */
@haggertk for LineageOS 15.X for Galaxy S5
@Lord Boeffla for Boeffla-kernel for LOS-14.x
@franciscofranco
@Sultanxda
@arter97
@faux123
@Saber
@nathanchance
@ZaneZam
@osm0sis for AnyKernel project
Many other XDA developers
XDA:DevDB Information
Boeffla-Kernel (unofficial), Kernel for the Samsung Galaxy S5
Contributors
sunilpaulmathew, Lord Boeffla
Source Code: https://github.com/SmartPack
Kernel Special Features:
Version Information
Status: Stable
Created 2018-03-17
Last Updated 2019-01-10
Change-logs
Oreo
Pie
Reserved
So we are in the house
Kernel works fine so far... No probs with undervolting either. But never used this feature for daily use. Because it's not recommended.
Lg msprenger
Yass! Boeffla the legend, the only custom kernel which performance is faster than any other custom kernels and stock kernels combine.
All the best for you @sunilpaulmathew
You`ll wearing great shoes to continue Lord Boeffla`s legacy
Checked first beta ... fine fine
Cool! Let's check it out!
msprenger said:
So we are in the house
Kernel works fine so far... No probs with undervolting either. But never used this feature for daily use. Because it's not recommended.
Lg msprenger
Click to expand...
Click to collapse
Welcome
The_Voice_70 said:
All the best for you @sunilpaulmathew
You`ll wearing great shoes to continue Lord Boeffla`s legacy
Checked first beta ... fine fine
Click to expand...
Click to collapse
Thanks friend....
kvsjxd said:
Cool! Let's check it out!
Click to expand...
Click to collapse
All good?
Hello, my device is kltekor but after I flashed your kernel the second sim signal appears on the status bar, is that a feature or a bug?
Blackburn119 said:
Hello, my device is kltekor but after I flashed your kernel the second sim signal appears on the status bar, is that a feature or a bug?
Click to expand...
Click to collapse
its a bug. unless your device is a dual-sim variant .
KazuDante said:
its a bug. unless your device is a dual-sim variant .
Click to expand...
Click to collapse
I'm sure Kltekor is a Korean device with single sim
Blackburn119 said:
I'm sure Kltekor is a Korean device with single sim
Click to expand...
Click to collapse
so yeah its def a bug and not a feature.
No such issues in my kltekor (SM-G900L):Lineage-OS 15.1 latest build. See screenshot attached. Maybe some other issues on the ROM side?
Blackburn119 said:
I'm sure Kltekor is a Korean device with single sim
Click to expand...
Click to collapse
for @all,
I'm now testing a new version of Kernel, which is built using UBERTC-8.x (latest toolchain). If anyone wants to test for me, plz pm me or contact me at Telegram.
sunilpaulmathew said:
No such issues in my kltekor (SM-G900L):Lineage-OS 15.1 latest build. See screenshot attached. Maybe some other issues on the ROM side?
for @all,
I'm now testing a new version of Kernel, which is built using UBERTC-8.x (latest toolchain). If anyone wants to test for me, plz pm me or contact me at Telegram.
Click to expand...
Click to collapse
what's the difference between ubertc and old boeffla?
sunilpaulmathew said:
Welcome
Thanks friend....
All good?
Click to expand...
Click to collapse
Yeah works fine as expected. Keep up the good work.
sunilpaulmathew said:
No such issues in my kltekor (SM-G900L):Lineage-OS 15.1 latest build. See screenshot attached. Maybe some other issues on the ROM side?
for @all,
I'm now testing a new version of Kernel, which is built using UBERTC-8.x (latest toolchain). If anyone wants to test for me, plz pm me or contact me at Telegram.
Click to expand...
Click to collapse
Runs well, undervolting works in this kernel now, thank you! Havent noticed anything else thus far exept undervolt is working which is really nice!
Edit: Seems like GPU underclock (27mhz) is also added, great job, thanks!
Boeffla-Kernel (unofficial) v2
New kernel version (v2), which is built using UBERTC-8.x (latest) toolchain, is now available to download.
Detailed change-logs are always available here.
Download links can be found here.
Enjoy...
Thank you very much for the New build.. Works perfectly with the boeffla App. The change to the New Toolchain goes without any probs
No malfunctions since Installation
Great job
Lg msprenger
Sorry friends, I made some accidental mistakes while preparing the last build and it makes the modules unaccessible (do anyone noticed?). The download links are now updated with proper builds. If you are not worried about modules, just avoid this message. Otherwise, update to the newly uploaded builds (Please note: there is absolutely no change in the file name).
Sorry for the inconvenience...
Downloads
https://sunilpaulmathew.github.io/downloads/
Did not notice any inaccassebility to any Module. Which Mods do you mean??