This happens every time I flash any lollipop ROM, it seems to work with Kitkat ROMs though. What should I do? And yes, I wiped dalvik.
Before installing any rom at first flash stock rom.
Go to cwm or any recovery Wipe data, cache, dalvik cache. flash rom & reboot system.
Sureshtuty said:
Before installing any rom at first flash stock rom.
Go to cwm or any recovery Wipe data, cache, dalvik cache. flash rom & reboot system.
Click to expand...
Click to collapse
I did that and it still doesn't work.
Radu Florin said:
I did that and it still doesn't work.
Click to expand...
Click to collapse
first boot will take 10 min
Sureshtuty said:
first boot will take 10 min
Click to expand...
Click to collapse
Yes, I know. This isn't the first time I flash a ROM, but this is the first time I get a bootloop even after I wipe dalvik cache.
Radu Florin said:
Yes, I know. This isn't the first time I flash a ROM, but this is the first time I get a bootloop even after I wipe dalvik cache.
Click to expand...
Click to collapse
u have to Wipe data, cache, dalvik cache Not only dalvik cache
Sureshtuty said:
u have to Wipe data, cache, dalvik cache Not only dalvik cache
Click to expand...
Click to collapse
I did that the first time you told me.
Related
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
hi i have galaxy sii gt i9100 everytime i flash a new rom or or update a rom using cwm and restart it my phone hangs at startup everytime and starts only when i wipe my data...any idea whats happening? plz help
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
jiffer1991 said:
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
Click to expand...
Click to collapse
happens with almost every rom...i've tried everything wipe data/factory reset, wipe cache, wipe dalvik nothing works!!
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
olawp said:
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
Click to expand...
Click to collapse
done that doesn't work!
Does it start normally after you wipe after you flashed?
I would try to flash stock 2.3.5 GB or 4.0.3 ICS with stock recovery and the flash cf root with odin.
Try this and then try flashing some roms
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
NocNoc9595 said:
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
Click to expand...
Click to collapse
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
bungknees said:
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
Click to expand...
Click to collapse
Is that considered a FULL wipe?
NocNoc9595 said:
Is that considered a FULL wipe?
Click to expand...
Click to collapse
No, full wipe is when you delete all user data as well.
bungknees said:
No, full wipe is when you delete all user data as well.
Click to expand...
Click to collapse
Ok I found the definitions of what a full wipe and no wipe is:
Full Wipe Install means:
- Wipe Data / Factory Reset
- Wipe Cache and Dalvik Cache
- Format System partition
- Install
No Wipe Install means:
- Wipe Cache and Dalvik Cache
- Install
Just a question, in the FULL WIPE listed above, where would I find "Format System Partition?" I don't recall seeing that..which category do I enter to do it?
CWM recovery mounts and storage format system .
jje
JJEgan said:
CWM recovery mounts and storage format system .
jje
Click to expand...
Click to collapse
Thanks, is there any harm if I do a full wipe EverytimeI upgrade an Omega ROM? I just want to stick to one way of things to minimize any issues.
hey guys i wanted to know if i had to wipe everything when there is an update for a rom? or just wipe cache and dalvik?
thanks
It's a case-by-case thing. Sometimes you only need to wipe caches, but others you'll need to do a full wipe. Usually a ROM developer will note what you have to wipe when they post the update, so make sure to check.
You could always just do a nandroid and then try flashing after a cache wipe. If that doesn't work, you can either restore or do a full wipe and reflash the update.
SoraX64 said:
It's a case-by-case thing. Sometimes you only need to wipe caches, but others you'll need to do a full wipe. Usually a ROM developer will note what you have to wipe when they post the update, so make sure to check.
You could always just do a nandroid and then try flashing after a cache wipe. If that doesn't work, you can either restore or do a full wipe and reflash the update.
Click to expand...
Click to collapse
ohh i see, i have the mean rom but i looked and didnt see anything to full wipe when installing the new update, i wasnt sure if to full wipe or just cache and dalvik
the architeck said:
ohh i see, i have the mean rom but i looked and didnt see anything to full wipe when installing the new update, i wasnt sure if to full wipe or just cache and dalvik
Click to expand...
Click to collapse
I always factory reset. Wipe cache, then dalvik. Twice in that order. But you can get away with just wiping cache and dalvik. As most will tell you
Sent from my EVO using xda premium
Steven 1 said:
I always factory reset. Wipe cache, then dalvik. Twice in that order. But you can get away with just wiping cache and dalvik. As most will tell you
Sent from my EVO using xda premium
Click to expand...
Click to collapse
thanks! :good:
the architeck said:
ohh i see, i have the mean rom but i looked and didnt see anything to full wipe when installing the new update, i wasnt sure if to full wipe or just cache and dalvik
Click to expand...
Click to collapse
Note that the MeanROM installation will wipe cache and dalvik cache for you, so no manual wiping is necessary actually.
Sent from my EVO using xda app-developers app
the architeck said:
hey guys i wanted to know if i had to wipe everything when there is an update for a rom? or just wipe cache and dalvik?
thanks
Click to expand...
Click to collapse
When I upgraded Stock Rom with Goodies i didn't need to wipe the cache's, smooth upgrade.
If I wipe Dalvik / ART Cache, System, Data, Cache in advanced wipe option in TWRP before flashing new ROM for clean flash, Will it remove TWRP too from my phone?
rajveer7827 said:
If I wipe Dalvik / ART Cache, System, Data, Cache in advanced wipe option in TWRP before flashing new ROM for clean flash, Will it remove TWRP too from my phone?
Click to expand...
Click to collapse
No it shouldnt.
Yuvch122 said:
No it shouldnt.
Click to expand...
Click to collapse
You sure? What partition does TWRP or other recoveries get installed in?
To the recovery partition, the one you usually dont ever wipe unless you flash a new one.
Yuvch122 said:
To the recovery partition, the one you usually dont ever wipe unless you flash a new one.
Click to expand...
Click to collapse
Ok thank you man