hello,
part 1
I will start by that the LG G3 I got from a neighbor and she did not exactly know what her boys do to the device :angel:
I do not know if the device was in debugging mode and ROOT so I will describe the current situation:
1 If you turn on the device is stuck the logo of LG
2 he can get into a normal recovery, but after I perform Clear / Reset is back to being stuck in the logo.
3- When I try to enter download mode he entered to fastboot mode Started and wait for fastboot Processsing command.
4- My computer installed SRKtool_2.1 droidth and SRKtool_1.0.5_droidth, as well as SDK is updated.
5- I tried to make various adjustments through SRKtool and via fastboot command, the file (*.bin\*.img) send to the device from the PC but faild to write them, and I get messages:
sending laf "okay"
writing laf "failed (remote: flash write failure)
all file have the same masssage.
I try to perform repair to:
A- fastboot mode Started
B- recovery mode
from srktools and I got the same write fail massage !
He's trying to re-write the BIN files taking off from the original rom,
again he can transfer files but does not actually write the on the device,
then the device restarts and then he stuck the logo of TWRP, the expense of battery re-enters the regular recovery mode.
part 2 Updated!
From time to time the device did not enter the FASTBOOT MODE and gets to the firmware update, I install a new ROM, but !!!
the operating system install LGE Android MTP Device driver,
when I flash the rom he stack on 3% and the hardware driver turn to yellow with code 10 (device not work properly).
does LGE Android MTP Device have to be install to do the FLASH ???
the MPT can be damage and that cause the problem ?
the same problem on 2 different PC & OS (xp/7/10) with different drivers for MPT,
after you restart the mobile it returns to FASTBOOT MODE
Related
Hello,
a few weeks ago i flashed cwm and cyanogenmod 10.2 nightly to my L9. I wanted to use Link2SD to move some apps from internal memory, so i had to repartition the sd-card. Unfortunaly the phone would not let me remove the sd-card (seems like it is stuck because the eject-mechanism is not working). So i tried to repartition the memory with Aparted from within the phone and of course i accidentally removed the phones internal partition, instead of the sd-card partition. Now the phone won't respond to almost anything i have tried. That includes:
- turning the phone on
- booting to recovery
- s/w upgrade mode
With Lelus tool i am able to get a fastboot connection, it even looks like i am able to flash another recovery image (i have the omap drivers still installed from flashing the phone the first time). But in the end the phone itself does not respond to anything. When trying to install ics x and u boot with Lelus script it fails after complaining about a missing partition.
Do you know another way to restore internal partition(s)? Is there any hope to get the phone working again?
Thank you in advance
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
tawhid111 said:
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
Click to expand...
Click to collapse
Thanks a lot! Looks like LG Support Tool recognizes my phone now (there is no visual feedback on the phone screen in S/W Upgrade right?) But when i start to use the tool to recover from a failed upgrade, it always skips around 20-25% progress. For a moment the phone is not shown in my windows device manager and after that, it is recognized as Ti Board - Omap44xx every few seconds and then lost again, like the driver is not properly installed (is that possible after being able to get to fastboot and S/W Upgrade mode?). Any idea?
kidCurly said:
Thanks a lot! Looks like LG Support Tool recognizes my phone now (there is no visual feedback on the phone screen in S/W Upgrade right?) But when i start to use the tool to recover from a failed upgrade, it always skips around 20-25% progress. For a moment the phone is not shown in my windows device manager and after that, it is recognized as Ti Board - Omap44xx every few seconds and then lost again, like the driver is not properly installed (is that possible after being able to get to fastboot and S/W Upgrade mode?). Any idea?
Click to expand...
Click to collapse
The s/w mode from the unofficial fastboot is not going to work. I think you really messed up your phone doing that (aparted). You might be able to run a fastboot command to repartition it but I doubt it will work. Try this command select option 1 (just fastboot)
fastboot devices
fastboot oem format
You should have a look at this information as well http://www.omappedia.com/wiki/Android_Fastboot
Sent from my LGMS769 using XDA Premium 4 mobile app
my phone just LOGO,, try update offline error 4%
then i try with fastboot:
fastboot devices
fastboot erase u-boot
fastboot erase boot
fastboot erase recovery
fastboot flash u-boot 2.img
fastboot flash boot 3.img
fastboot flash recovery 4.img
now phone is dead,, i se on device manager omap4430 fastboot usb device only connect then disconect continuesly...
please helpp,,, #cry
This should help you fix it: http://forum.xda-developers.com/showthread.php?t=2119090
It will give you fastboot access again so you can flash the correct files.
I love omap devices, they seem to be difficult to hard brick with the exception of the high security models.
Sent from my Amazon Tate using Tapatalk
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
Download and install "minimal adb and fastboot"
Just type on the command line without pressing Enter:
Code:
[COLOR="Blue"][B][I]fastboot [COLOR="Plum"][STRIKE]boot[/STRIKE][/COLOR] recovery.img[/I][/B][/COLOR]
you should place your recovery image file in "minimal adb and fastboot" directory
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds - in my case the phone is restarting)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery command line
Click to expand...
Click to collapse
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
i must extract "flashrec TWRP v2.7.1.2 this file on phone or where? can u explain a
agsao said:
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
Click to expand...
Click to collapse
Please explain me. idont know how to do
prxzero said:
Please explain me. idont know how to do
Click to expand...
Click to collapse
What Is your problem?
Is your phone stuck on logo screen? what were you doing to get the problem??
agsao said:
First of all I would thank Crowds he is the best reference that I've to return in case of any problem I face. (He doesn't sleep - any time I ask he immediately supports)
I bought Lenovo K910 and I've managed successfully to install new ROM "VIBEUI_v2.0_1443" and Gapps with Crowds support.
I advised two of my friends to buy this good and cheap phone. For one of them I installed the latest rom successfully. But with the other I had a big problem The phone stuck on Lenovo Logo.
I was trying to install TWRP 2.7.0.0 batch before installing my new ROM, but during installation and after the phone rebooting the batch command screen shows <Waiting for Device> and the phone is stuck on logo screen.
I tried to connect the phone to PC many times, but PC doesn't recognize the phone. When I try to turn off the phone by pressing the power buttons, the phone restart on logo screen like the shown in this video.
I've read in many site that I have to do the following:
In my case when I press and hold power button the phone is restarting on logo screen so I have to wait for battery consumption
I tried many times with TWRP images but it failed...
I tried with CWM image and it succeeded to load, but I don't have otg cable to load recovery or ROM from usb storage (The problem was in installing TWRP and my ROM should has no problem)
I want to flash TWRP on phone not only loading by "minimal adb and fastboot".
I decided to flash TWRP 2.7.1.2 batch through modifying the batch file. I just used fastboot commands
Code:
[COLOR="blue"][I]fastboot oem device-info
fastboot oem unlock
fastboot oem device-info
fastboot [COLOR="Red"][U][B]flash[/B][/U][/COLOR] recovery data/recovery.img
fastboot flash aboot data/lock/emmc_appsboot.mbn
fastboot flash rpm data/lock/rpm.mbn
fastboot flash sbl1 data/lock/sbl1.mbn
fastboot flash dbi data/lock/sdi.mbn
fastboot flash tz data/lock/tz.mbn
fastboot reboot[/I][/COLOR]
Finally I succeeded to install Recovery and phone works well in the new recovery mode and the system mode that I've not update it yet
I want to share you the problem solution in brief:
Download and extract this file "flashrec TWRP v2.7.1.2" from here
Just select without executing "flashrec_Modified.bat" file from the extracted files.
The phone should be disconnected from computer and completely off (press the Power button for 10 seconds or wait for the battery to be almost empty)
Press and hold both volume buttons, then connect the cable to the PC.
Once the phone vibrate, press Enter to execute the recovery batch file
and as me the phone start the recovery mode in TWRP and can be rebooted in system without any problem
Click to expand...
Click to collapse
Hi..
i just try to install CM12 to this device, with twrp 2.8.6.1 from master lie.
First time its working well, but suddenly this device restarting and stuck on the "lenovo" logo screen.
Every time i presh power button always restarting (like ON-OFF-ON-OFF forever).
when i connectto charger also restarting....
i cant go to twrp using vol- & pwr, when i use minimal adb cannot detected..
Can you help me...
Help
hi.
i try to do something to enable notifications on my lenovo vibe z.
i install new rom from needrom, but it didn't help. So i try to install other one, but i wipe my phone and restart without installed system.
Now when i go to twrp have just flashing teamwin logo, and only when phone is in this mode i can communicate through adb
i have checked many forums and try allot stuff to fix it but nothing works
Please Help!
U are not alone I also in same stage
Is there any one plz help
As long as the hardware is not physically broken, your K910 is unbrickable
http://www.teamsuperluminal.org/unbrick-lenovo-k910/
I followed the guide to revive my K910. You can refer to this forum post in which I documented my experiences:
http://www.teamsuperluminal.org/forums/topic/flash-back-to-lenovo-stock-just-temporarily/
nowbo said:
Is there any one plz help
Click to expand...
Click to collapse
Thanks for your reply
I will apply today. Hope for the best.
Will inform you as soon as this applied..
Have you fixed that problem?
Still at same stage
EcoDan said:
Have you fixed that problem?
Click to expand...
Click to collapse
Hi,
I am still on same stage (Black screen with lenovo logo). Try several ways but can't get out of this. Please help me If any one successful to startup this device or can get on the boot screen where I can do factory reset.
---------- Post added at 07:25 AM ---------- Previous post was at 07:21 AM ----------
wxppro said:
http://www.teamsuperluminal.org/unbrick-lenovo-k910/
I followed the guide to revive my K910. You can refer to this forum post in which I documented my experiences:
http://www.teamsuperluminal.org/forums/topic/flash-back-to-lenovo-stock-just-temporarily/
Click to expand...
Click to collapse
I Try this method but can't get out from that black screen ( Lenovo logo and powered by android)
My device is Lenovo Vibe shot Z90a40. I also try with boot unlock-er but nothing sitll work. So its about 20 days can't use my Lenovo Vibe Shot.
Please help me If you know how to get out of this issue..
Thanks
[/COLOR]
I Try this method but can't get out from that black screen ( Lenovo logo and powered by android)
My device is Lenovo Vibe shot Z90a40. I also try with boot unlock-er but nothing sitll work. So its about 20 days can't use my Lenovo Vibe Shot.
Please help me If you know how to get out of this issue..
Thanks[/QUOTE]
You need to carefully follow each steps in the method - if you short that magic pin and then connect the USB cable (with battery disconnected), your computer will report seeing the device at either COM port 9008 or 9006. Then you can download the factory image to revive the phone. Of course you need to have the right device driver installed. Like I said, as long as the hardware is not broken, this procedure will succeed for sure.
I love you man!
I love you man! I wish you all the happiness and wealth!:victory::victory::victory::angel::angel::highfive::highfive:
I was using AOSPE rom and got new email id from office while adding new email got error saying can not add this email id without encrypting the device. For 3 hrs, it was stuck on 100% then the battery died I turn on the device again and promote screen for the password I didn't know which one to enter so I enter Gmail password. 'Encrypting unsuccessful Password is correct but data is corrupt reset phone to decrypt device' there was no any other options so I proceed like this
1) factory reset -> yes -> swipe
2) advance wipe /system /data /data/media /cache etc.
2) flash last rom I was using(AEX)
3) flash gapps
4) reboot the device.
after a reboot on the setup device screen, com.android.phone and google services framework stop working continuously so from step 2 I tried RR rom but no luck :crying: then flash stock rom and reboot device got in a boot loop :crying::crying: so holding vol. down and power button I am able to enter in bootloader screen but as I enter in recovery mode getting no command screen and adb not detecting the device.
what should I do? how can I get recovery mode back? teamwin or any other?
Hi , if your are able to boot into bootloader , just plug your device and write :
fastboot device
(just to make sure that your device is detected)
Now , from your stock firmware extract just recovery.img and put inside minimal adb & fastboot folder
now open terminal and write :
fastboot flash recovery recovery.img
(in order to flash back your stock recovery)
now write fastboot reboot
More explained you have here:
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
stock firmware:
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
XT1550 (Dual-SIM)
Good luck
Hello. I have a Moto G6 with cfw and it was running more or less fine. Recently I updated Magisk through Magisk Manager (it said the update partially failed) and now I can't boot, and when I try to decrypt /data in TWRP I can't even though I'm 100% sure the password is correct. The error I get on start is
Code:
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Invalid boot image header!
Error: failed to load kernel!
Fastboot Reason: Fall-through from charger boot mode
I've already tried running
e2fsck /dev/block/platform/soc/7824900.sdhci/by-name/boot
Can anyone help?
How and how to restore the smart, please tell me.
"Frankenstein" from 996. Unlocked the bootloader, but could not overcome the safety net in magisk .. I flashed 998 30b, and then blocked the bootloader. Immediately upon startup, it writes a message in red font "Your device has failed a routine safety check and will not boot". It enters fastboot mode, it is seen by the computer as an andoid fastboot device. The fastboot devices command does not detect the device ... It enters the download / update mode - the computer does not see it in any way. I reinstalled the drivers. It costs win 10 64bit. Lgup 1.14.3... Help please.
art1901 said:
How and how to restore the smart, please tell me.
"Frankenstein" from 996. Unlocked the bootloader, but could not overcome the safety net in magisk .. I flashed 998 30b, and then blocked the bootloader. Immediately upon startup, it writes a message in red font "Your device has failed a routine safety check and will not boot". It enters fastboot mode, it is seen by the computer as an andoid fastboot device. The fastboot devices command does not detect the device ... It enters the download / update mode - the computer does not see it in any way. I reinstalled the drivers. It costs win 10 64bit. Lgup 1.14.3... Help please.
Click to expand...
Click to collapse
I have a similar situation...
have you resolved the problem? Need a new firmware I think...