for while unpack it gives errror
error: android magic header not found
hi there am from belguim i have a asus transformer tf103c
the first problem i had fastboot starting ... current firmware version 209.05
i search from the internet and found the solution :
- From official LP firmware unpack file esp.img
- Extract file: bootx64.efi
- Put all files (above file and firmware unpacked files), together with fastboot files in folder with adb files
In the folder with the unpacked files must be (among other files and folders) the following:
- bootx64.efi
- droidboot.img
- boot.img
- esp.img
- partition.tbl
i downloaded evry file .
Then go to »Fastboot starting« on TF103C and connect it to PC.
Open cmd and input one command at the time (wait for response for each):
- fastboot flash osloader bootx64.efi
oke finish
- fastboot boot droidboot.img
ok finish
- fastboot flash fastboot droidboot.img
but whit this command he says wating for device
i sleep 1u and stil the same
please help me i don't know what to do
and i wanna learn more about android
- fastboot flash boot boot.img
- fastboot flash fastboot droidboot.img
- fastboot oem start_partitioning
- fastboot flash /tmp/partition.tbl partition.tbl
- fastboot oem partition /tmp/partition.tbl
- fastboot erase cache
- fastboot erase userdata
- fastboot oem stop_partitioning
- fastboot oem wipe ESP
- fastboot flash ESP esp.img
- fastboot reboot
sorry for bad english
plaese help me i will never forget it
thanks anyway
I have the same problem.
I am trying to flash with Fedora Core (Fedora-Minimal-armhfp-26-1.5-sda.raw.xz)
[[email protected] Documents]# fastboot flashing get_unlock_ability
RESULT: FAIL(unknown command).
I have manged to get TWRP to compile without errors for my device (ZTE Nubia Z11 Mini - NX529J).
I generated the mk files and the pre-built kernel by extracting the boot.img with dd and running mkvendor.sh on it.
I then fixed up the files manually until it compiled.
However, I can't get it to boot.
Code:
~/android/twrp $ sudo fastboot boot out/target/product/NX529J/recovery.img
downloading 'boot.img'...
OKAY [ 0.394s]
booting...
FAILED (remote: dtb not found)
What are dtb files and how do I generate them?
If I use this repo for my device it compiles and boots fine.
However, it has a dt.img and a mkbootimg.mk file that I don't have.
I don't see these files mentioned in the compile guide by @Dees_Troy or this other step by step guide.
What is dtb and how do I generate it?
After flashing TWRP in my Realme X i got that message that i current image (boot/recovery) have destroyed and cannot boot.
Here is solution that worked for me.
1- Flash twrp
2-Download vbmeta.img (8kb in size)
3-Move it to Platform-Tools folder
4-Open cmd in Platform-Tools folder
5-Run this command
fastboot - disabled-verity - vbmeta flash-verification-enabled vbmeta.img
Note-this command is only working in command prompt not in Windows 10 shell.
And open cmd in Platform-Tools
Hi, i am trying to install a system.img to the system partition using fastboot using
Code:
fastboot flash system C:\Users\user\Desktop\system.img
but when i run the command i get this error:
Code:
Sending sparse 'system' 1/7 (460796 KB) OKAY [ 13.966s]
Writing 'system' FAILED (remote: 'sparse flash write failure')
fastboot: error: Command failed
i don't know if this is related to this other issue https://forum.xda-developers.com/t/...-cannot-flash-images-to-file-systems.4535981/
but i can't flash system images neither from recovery nor from fastboot (i have tried also other images).
it doesn't seem to be a memory issue because i have also used the -S option to split the image and it still doesn't work.
Help
Don't put your img file on desktop screen.Move the img file on the C drive and flash again with the right command.Hope it will be solved.
shaon121$ said:
Don't put your img file on desktop screen.Move the img file on the C drive and flash again with the right command.Hope it will be solved.
Click to expand...
Click to collapse
It still doesn't work as administrator and with the image in the C drive root.
Change your img file and try again..or download again... What is your phone model?
shaon121$ said:
Change your img file and try again..or download again... What is your phone model?
Click to expand...
Click to collapse
I have already tried different images, the phone is a Huawei P Smart FIG-LX1.
useless double posts
Can't flash system.img in TWRP - E:Cannot flash images to file systems
I am trying to install a custom ROM on a Huawei P Smart FIG-LX1. I have a system.img that i should flash to the system partition. So when i try to flash the image i have two system partitions: Ona named "System" and one named "System Image". If...
forum.xda-developers.com
Size of image is larger than the target device in TWRP
Hi, I am trying to flash a system image in TWRP. When i try flashing the system.img to the System Image partiton i get this error: Size of image is larger than target device How can i solve this error? I tried the resize partition option on the...
forum.xda-developers.com
slx23 said:
Hi, i am trying to install a system.img to the system partition using fastboot using
Code:
fastboot flash system C:\Users\user\Desktop\system.img
but when i run the command i get this error:
Code:
Sending sparse 'system' 1/7 (460796 KB) OKAY [ 13.966s]
Writing 'system' FAILED (remote: 'sparse flash write failure')
fastboot: error: Command failed
i don't know if this is related to this other issue https://forum.xda-developers.com/t/...-cannot-flash-images-to-file-systems.4535981/
but i can't flash system images neither from recovery nor from fastboot (i have tried also other images).
it doesn't seem to be a memory issue because i have also used the -S option to split the image and it still doesn't work.
Help
Click to expand...
Click to collapse
[Solved] Fastboot flash super error - FAILED (remote: 'failed to check sparse crc')
Hi, I'm getting an error trying to install stock rom from xiaomirom.com via fastboot. D:\Downloads\vili_eea_global_images_V12.5.21.0.RKDEUXM_20220224.0000.00_11.0_eea>fastboot flash super...
forum.xda-developers.com