[cwm][untested][v.6.0.5.x][s7262] - Samsung Galaxy Star

Hi everyone ....
I will share CWM for samsung galaxy star 7262
I make to flashable zip
So​Steps to install​
1. Switch off your phone
2. go to recovery mode
3. install zip
4. install zip from sdcard
5. Select the files CWM Recovery 7262.zip
6. Turn on your phone
7. finish
DON'T MIRROR LINK​
Click to expand...
Click to collapse
REMEMBER THIS IS UNTESTED
SO
PLEASE REPORT TO ME IF WORKS OR DOESN'T WORK
DOWNLOAD
if you like my work please press like button ^-^​

Reserved

Info
Please would you like to share the device tree and kernel?

Related

[ROOT][RECOVERY][100%] ROOT +TWRP RECOVERY for samsung Galaxy Tab 4 t231

100%ROOT + TWRP RECOVERY ​
NOTE:This Was Tested By Me On TAB 4 t231 with Firmware Version T231XXU0ANG1_T231ODD0ANF3_INU ; It May Work With Latest Firmware Verions , But I Haven't Tested
REQUIREMENTS:
* PC
*TAB 4 T231
*DATA CABLE
*PROPER DRIVERS INSTALLED
*ODIN V3.09.zip HERE and Extract thanks to @thisisapoorusernamechoice
*Download TWRP from HERE AND EXTRACT
* DOWNLOAD SuperSU from HERE
INSTRUCTIONS:
RECOVERY :
Put your tablet in download mode by Pressing the Home button + Power + Volume Down; Release buttons ,wen u see a warning ; then you should press the volume up (vol +) to continue to download mode.
* Run Odin v3.09 and connect tablet, The box in odin will turn to light blue box ID: COM;
* Check The AP box and locate the unzipped file TWRP file recovery.img.tar.md5;
*Finally click on the Star button and wait for few seconds until Odin process and show you the notice Pass in green and completely restart the tablet, click Exit to exit Odin.
RECOVERY WAS SUCCESSFULLY FLASHED
ROOT
*BOOT INTO RECOVERY BY PRESSING POWER+HOME+VOL UP
*NOW SELECT INSTALL ZIP FROM SD CARD
* CHOOSE THE sUPERSU.ZIP
*CONFIRM YES BY SWIPING
REBOOT CHECK WITH ROOT CHECKER
SUCESSFULLY ROOTED Tab 4 t231​
Credits and drivers
DRIVERS
*INSTALL SAMSUNG USB DRIVERS FROM HERE HERE
*IF IT DOESNT DETECT MOBILE , TRY PDANET+ DRIVERS FROM HERE
CREDITS
*ALLAH(SWT)
*GOOGLE
*XDA
*TWRP & UNKNOWN COMPILER
* @Chainfire for Supersu.zip
*odin
*Myself(ofcourse)​
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
shawn718 said:
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i second this. will it work with the SM-T237P?
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
thisisapoorusernamechoice said:
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
Click to expand...
Click to collapse
updated !!! thank u
Worked like a charm on my T231
THANK YOU SOOO MUCH
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
C,
when you flash recovery with odin you must DESELECT auto restart.
when the flash is done [res-ok] disconnect your tab and manually reboot to RECOVERY.
then reboot as normal.
m
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tab-4/development/root-root-twrp-recovery-samsung-galaxy-t3021471
http://forum.xda-developers.com/tab-4/general/root-tab-4-sm-t231-gsm-wifi-t3010102
@Faiyaz5yaz
Thanks TWRP works great on my Tab 4 T231
:good:

[NOOB-GUIDE] How To Flash Custom Recovery In XOLO A600

HOW TO FLASH CUSTOM RECOVERY IN XOLO A600
Hey Guys!
*Rooted Your A600?
*Want To Flash Custom Recovery?
Than You Are At Right Place!!
Here I will Tell You How To Flash Custom Recovery In Your A600!
Let's get started!
PROCESS:-
1. First Of All Download Any Custom Recovery That You Want To Flash! But It Should Be According To Your Firmware Or Build Number!
CLICK HERE TO DOWNLOAD RECOVERIES FOR XOLO A600
2. Than Extract Zip Of Recovery (If In Zip File!) If Not Than Skip This Step!
3. Now Place recovery.img In SD Card But Not In Any Folder.
4. Now Download "Rashr" From Play Store!
5. Open Rashr.
6. Give Root Permission.
7. Than Click On "Update Recovery From Storage"
8. Now Navigate To recovery.img & Click On It! Yes or No Pop-up will come! Tap On Yes!
9. Again A Yes or No Pop-up Come! Tap On Yes! Now It Will Reboot You Into New Recovery! Which You Flashed!
Hurrraaaahhh! You Have Successfully Flash A Recovery!
Now You Can Make Backup Of Your ROM! And Can Flash Anything That You Want!
If You Found This Useful Than Please Hit Thanks! It Will Not Cost You Anything But It Will Motivate Me A Lot!
"Thanks" ​

ROOT Galaxy Grand Prime G531H 100% Work Without Prerooted Firmware.

Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Worked for me
Thanks
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Mahmoud11111 said:
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Click to expand...
Click to collapse
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
ndm4ompk said:
Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Click to expand...
Click to collapse
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
@Elie.G said:
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
Click to expand...
Click to collapse
flash stock rom tar via odine uncheck auto reboot, after flash pull battery and insert it now go stock recovery with press
volume up+home+power key and do factory data rest and cache and now in download mode and do it again..
(only do first not flash twrp 3.0..0.0)
(first u on g531h)
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
Click to expand...
Click to collapse
When i try the 3 step doesnt apeer the twrp recovery, on previous step seem to be all ok.
Thanks millomilky, my english is not good but u explain it very well, thanks again and i appreciate your work,,
Sent from my SM-G900V using XDA Free mobile app
In step 3 1st time apear a slide bar, slide it right to enter twrp,
Sent from my SM-G900V using XDA Free mobile app
ndm4ompk said:
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
Click to expand...
Click to collapse
Unfortunately , this custom kernel is not compatible with my device , my device stucked at boot and said "kernel is not seandroid enforcing"
So i restored my stock kernel again which i backed it up.
Please anyone have any ideas about changing SElinux mode to permissive on this phone SM-G531H don't forget me
I tried selinux mode changer app and terminal emulator but doesn't work for me
Ok i m trying find like u,,
Sent from my SM-G900V using XDA Free mobile app
Is this thread works on AOK2?
Finally, My phone has been rooted now
Now. I just need the touchwiz music player for this device.
Because This device doesn't have the default (music player).
If u have g531h then answer is yes,
Sent from my SM-G900V using XDA Free mobile app
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Zainelabdeen said:
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Click to expand...
Click to collapse
Thanks Zain
Does this method work in the sm-g531h/dl variant?
I ask because i have a problem recently with a recovery for the sm-g316ml/ds. I flash a recovery for the sm-g316ml and it didnt work. thanks in advance
thanks before
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
riefers212 said:
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
This picture might help. Screenshot is taken from G531H that I rooted using this guide.
Rooting on some other devices does not require turning-off FRP lock.
But it's always better to turn-off FRP lock (to check Manufacturer unlock).
Click to expand...
Click to collapse

Root & Install Recovery Grand Prime G531H New Method And Xposed Installer

Sorry For needs request permission BCZ I Forget .. Plz Check Now....
***********************************************************************
Root Samsung Galaxy Grand Prime G531H And Install Xposed
1. Download This Zip And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMVM2QjVQNFJmbGM
2. Copy UPDATE-SuperSU-v2.46.Zip In your SD Card
3. Copy xposed-v75.3-sdk22-tw-arm-custom-build-by-wanam-20151019 In SD Card
4. Copy XposedInstaller_3.0_alpha4_1_.apk In SD Card And Install But Don't Open
5. Power Off Mobile And Press VOLUME DOWN+HOME BUTTON+POWER BUTTON And After Volume Up Button
Now You In Download Mode
6. Open Odin_3.10.0 In download Folder , Uncheck Auto Start
7. Connect Your Mobile With PC ( First U Have Install All Samsung Drivers )
8. Press AP BUTTON
9. Select In Download Zip Folder TWRP_3.0.0.0_SM-G531H.tar.Md5 File
10. Now Click Start
11. After Get Pass Msg Pull Battery And Insert And Press VOLUME UP+HOME+POWER KEY
And Wait For Minute, Now U In TWRP Recovery
12. Now Flash UPDATE-SuperSU-v2.46.Zip and After Flash xposed-v75.3-sdk22-tw-arm-custom-build-by-wanam-20151019
13. Now Restart System And Check Root Status, Itz Done
14. Open Xposd Installer And Update Framework And Restart..
Thanks
If TWRP Is Not In English Plz Find Options In TWRP And Select English ,
Thanks,
For TWRP Language Change. Check Screen Shot...
Hi, my device is already rooted with twrp. What should I do to get xposed?
If u r rooted so u need to do only step 4 and then step 3 and flash with recovery xposed 75.3-sdk22 installer and restart ,,
Sent from my SM-G900V using XDA Free mobile app
Does this method work with the SM-G530T1 variant?
redeyezzjay4148 said:
Does this method work with the SM-G530T1 variant?
Click to expand...
Click to collapse
i test on only g531h, but u can try on ur mobile,
The url to the file needs the owner's permission to download!!!
Link needs request permission
ndm4ompk said:
root samsung galaxy grand prime g531h and install xposed
1. Download this zip and extract
https://drive.google.com/open?id=0b41td9n4b4iamvm2qjvqnfjmbgm
2. Copy update-supersu-v2.46.zip in your sd card
3. Copy xposed-v75.3-sdk22-tw-arm-custom-build-by-wanam-20151019 in sd card
4. Copy xposedinstaller_3.0_alpha4_1_.apk in sd card and install but don't open
5. Power off mobile and press volume down+home button+power button and after volume up button
now you in download mode
6. Open odin_3.10.0 in download folder , uncheck auto start
7. Connect your mobile with pc ( first u have install all samsung drivers )
8. Press ap button
9. Select in download zip folder twrp_3.0.0.0_sm-g531h.tar.md5 file
10. Now click start
11. After get pass msg pull battery and insert and press volume up+home+power key
and wait for minute, now u in twrp recovery
12. Now flash update-supersu-v2.46.zip and after flash xposed-v75.3-sdk22-tw-arm-custom-build-by-wanam-20151019
13. Now restart system and check root status, itz done
14. Open xposd installer and update framework and restart..
Thanks
if twrp is not in english plz find options in twrp and select english ,
thanks,
Click to expand...
Click to collapse
hey your link needs request permission hahahaa....and you are not responding is this for free? Hahahaha
Essam113 said:
The url to the file needs the owner's permission to download!!!
Click to expand...
Click to collapse
sorry i forget it, plz check now
redskin08 said:
hey your link needs request permission hahahaa....and you are not responding is this for free? Hahahaha
Click to expand...
Click to collapse
sorry hahahahah boss, i forget it, check now,
redskin08 said:
hey your link needs request permission hahahaa....and you are not responding is this for free? Hahahaha
Click to expand...
Click to collapse
and say thanks in comments

			
				
redskin08 said:
hey your link needs request permission hahahaa....and you are not responding is this for free? Hahahaha
Click to expand...
Click to collapse
i work only for yours thanks
i get error executing updater binary in zip ' ---xposed file----'
my device is already rooted but to do that i am not use TWRP_3.0.0.0_SM-G531H .
Is this the cause of the problem
thank u
Samsung grand prime sm-g530w
Is there a totorial on how to install xpose framework on this device running 5.1.1.?
Zainelabdeen said:
i get error executing updater binary in zip ' ---xposed file----'
my device is already rooted but to do that i am not use TWRP_3.0.0.0_SM-G531H .
Is this the cause of the problem
thank u
Click to expand...
Click to collapse
Yes zain 1st flash this twrp with odine.
ndm4ompk said:
Yes zain 1st flash this twrp with odine.
Click to expand...
Click to collapse
Thank you
If I flashed twrp again is it leads to a problem?
Is this a safe way ?
My current twrp v2.8.7.0
Zainelabdeen said:
Thank you
If I flashed twrp again is it leads to a problem?
Is this a safe way ?
My current twrp v2.8.7.0
Click to expand...
Click to collapse
Yes itz safe..
If any problem, flash stock rom with odine and do these all steps..
Jvirg said:
Is there a totorial on how to install xpose framework on this device running 5.1.1.?
Click to expand...
Click to collapse
Yes do this all steps, xposed will work nicely.
Jvirg said:
Is there a totorial on how to install xpose framework on this device running 5.1.1.?
Click to expand...
Click to collapse
I'm rooted using that kingroot and was wondering if there is a no pc way of installing xpose framework? My phone is grand prime sm-g530w
ndm4ompk said:
Yes itz safe..
If any problem, flash stock rom with odine and do these all steps..
Click to expand...
Click to collapse
Thank for good support
I flash twrp 3 but the language is not english.
I try to fix it by downloading twrp them manager but it's not fix this problem.
update : i fixed this problem without any other program
Installing xposed is done , first I get bootloop l power off phone and open it take around 15 minutes to update application and start normally.
Last I open xposed and click on softreboot.

All Guides For New Users[SM-G7102,SM-G7105]

For NewBie's​Hii Today Iam Going To Help All New Users Of Grand 2 SM-G7102,SM-G7105.
Basic​If U Want To Install New Custom Roms Or Any Type Of Custom Rom Then Follow The Steps.
●First You Need A Custom Recovery To Install A Custom Rom Or Any Zip Files
●There Are Many Custom Recovery Available For Grand 2 Both Varients(But I Recommend TWRP).
How To Install Custom Recovery ?​●First U Need To Download TWRP Recovery
●The Recovery Should Be In Tar Format(Odin Flashable)
●Then U Need To Download Odin Latest Version(I Added The Files Link Below)
●Then Extract Odin.zip In Desktop And Open Extracted Folder From There
●Now U Need To Access Your Phone Into Download Mode,To Access Download Mode U Need To Press(Volume Down+Home Button+Power Button Together)Then U Will See An Android Icon On Your Screen Press Volume Up Button To Continue,Now Connect Ur Device To Your PC Via An USB Cable.
●Ok Now Last Step Is Open Odin As Administrator By Right Click On Your Mouse.
●Now U Will See That Odin Is Opened And There Are Many Options Like AP,CP,Etc
●Now U Need To Select Ap Option And Find Ur Recovery.tar File Where U Placed It Then Click Start To Start The Installation.(Uncheck Auto Reboot Option If U Are On Stock Rom Means 4.4.2 Kitkat,This Will Bypass install-recovery.sh)
●It Will Take Some Seconds To Complete When U See Pass Message Then Look At Your Phone.
●Now Remove Battery And Reinsert The Battery And Press Volume Up+Home Button+Power Button) To Enter Into Recovery Mode.And U Will See That TWRP Is Written In Your Screen.
Congrats You're Successfully Installed Custom Recovery
How To Install Custom Rom Or Patches ?​●First Download The Rom.zip File To Your Internel Storage Or Externel Storage Wherever U Want.
●Then In TWRP Recovery
●Select>Wipe Option Then Tick 4 Options
●Data,Cache,Dalvik-Cache,And System
●Now Install Ur Rom.zip File From Ur Specific Storage Where U Placed The Rom.zip File And Wait For Installation Complete(If There Is No Patch Required For The Rom,Then Follow This Instruction Only)
●And If There Is Any Patch Required To Fix Any Bug Of Any Rom That You're Installing Then All U Need To Do This Just Follow Above Step But Before Start U Select 1 Option Add Zip Files (Which Is Came After U Select Any Zip File),And Select Your Patch Zip For Your Rom,Then Start The Installation.
How To Fix BootLoop On Your Current Rom ?​●Bootloop Is An Irritating Bug Of Any Device.
What Is Bootloop ?
●Look You're Using A Rom Such As Stock Or Custom Rom.And U've Powered Off Your Devicr Or U've Selected Restart,And Suddenly U're Saw That You're Phone Is Not Booting Or Stuck At Samsung Galaxy Grand 2 Logo Or In Boot Animation.And Not Booting Or Not Turning Up The Soft Key Lights.
How To Fix Bootloop ?
●If You've Did'nt Flashed Anything Then Select Wipe Dalvik Cache And Cache,After That Reboot Your Phone And Your Phone Will Start Within Some Minutes.
●If U Flashed Something That Is Not Supported By You're Device And U Dont Know What U've Done And U Saw Bootlooping Then Wipe All Partitions
System
Data
Dalvik-Cache
Cache
Then Reflash Your Rom With Patch(If U Remember How To Do This Then Ok Or Otherwise Follow My Step In This Thread Which I've Written Above.
How To Flash A Rom Without Loosing Any Of Your Personal Data Or Apps ?​If U Want To Flash A Custom Rom With All Your Personal Data And Apps Then Stay Chilled You're In Right Place.
●First Of All Go To TWRP Recovery Go To Wipe And Select Only System,Cache,Dalvik-Cache Do Not Wipe Data
●Then Flash Your Favourite Custom Rom With Out Loosing Your Apps And Personal Data. :good:
Anirban Ganguly​[email protected] Grand 2 duos,Lte(4G)​ Hit Thanks​●If U Need Any Help Then Feel Free To PM Me At Xda.
●More Guides Are Coming Soon.
●Iam Bit Busy In Development,So When I've Free Time I Will Add More.
Downloads​Downloads Link In 3rd Post.
How To Install Boot.img Or Recovery.img Without A Pc ?​●First You Will Need To Download Flashify From Play Store
●Open Flashify And Give It A Root Access
●Then Select Flash Img
●Then locate Your Img File Wherever You Placed It And Select Flash
●It Will Automatically Reboot
Thats It For Now More Guides Are Coming Soon​
Reserved
DOWNLOADS
●TWRP[ms013g][Grand 2 Duos SM-G7102]
http://forum.xda-developers.com/galaxy-grand-2/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3107535
●Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Anirban Ganguly said:
DOWNLOADS
?TWRP[ms013g][Grand 2 Duos SM-G7102]
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0
?TWRP[ms01lte][Grand 2 LTE SM-G7105]
https://www.dropbox.com/s/8lrh85ps62h2l8l/recovery.tar.md5?dl=0
?Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Click to expand...
Click to collapse
Bro Direct links of others work not allowed in xda... better give their thread link...so that no one will report to mod
....
Ok
Please, how do I flash recovery for Samsung Grand 2 without pc?
Billygent said:
Please, how do I flash recovery for Samsung Grand 2 without pc?
Click to expand...
Click to collapse
only possible only when a existing custom recovery installed on your device,if u want to flash zip but if u want to flash img file then follow my guide which is written above
This thread is really helpful for new users. Thx for this thread, really helpful.
Sincerely, NYT
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Flashing Recovery.IMG without PC
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
It is easy and convinient if you're gonna use this method somehow watch out for the bugs because it may cause u to get stuck on recovery booting or download mode (good news is it wont affect with ur memory).
Use flashify, select the downloaded recovery (Extract when needed) and wait for some few minutes to flash the file.
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
use flashify if you have root
To root without pc,you can use Kingroot

Categories

Resources