canvas turbo hang at logo. and get heated. i can't turnoff it. but it open in recovery mode. plzz help me and tell how to flash new rom in it. sp tool not working because battery is inbuilt. tell me another way to flash a new rom in canvas turbo
Download A Rom For Your Phone
Nd Flash It If u Are Able To Go recoverY Mode
__________________________________
Sent From My N7100 UsinG ElephanT
Using Galaxy Y As ExperimenT
Always Press ThanKS IF I HelpeD
nothing happen still logo hang. canvas turbo doesn't support micro sd card so i can't flash it by recovery image. In recovery mode. I restore it and wipe dalvik cache but still logo hang problem.any other way to install new stock rom in it.
Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Flash stock firmware
With this tutorial
http://forums.droidbeans.com/microm...)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
ArshArora said:
Flash stock firmware
With this tutorial
forums.droidbeans.com/micromax-a116-canvas-hd-rom-index/(stock-rom)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Use traditional method (SP Flash Tool)
Raveesh Delhi said:
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Click to expand...
Click to collapse
Use sp flash tool... Video link for it
http://m.youtube.com/watch?v=7pCiWR_H7wc
Enjoy bro!! Hope it will help you.
Raveesh Delhi said:
Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Click to expand...
Click to collapse
OK so as the recovery is accessible by u
Flash som other ROM 4 nw
Nd thn download a flashable zip of stock Nd thn flash it
Rooted Canvas HD stuck on logo
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
You need to flash the files given in the thread using SP Flash Tools !!
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
Bheem I hope your problem has been solved.
As for my problem, my device is unsavable.
try wiping dalvik cache
otherwise reflash after clearing all the necessary things
Without working usb connection, you should not try flashing different roms. I lost Samsung galaxy i5000 due to same problem. I didnot have button combination option to go to recovry.
However your device can survive. 1. Turn off the phone by removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key . after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia z2(my choice only, you can try any stable rom) from your memory card.
This should work and get usb repaired aSAP.
Hey guys
I have Micromax A114. It just won't boot up. No logo nothing. When I connect it to my laptop it keeps connecting and disconnecting. Please help me guys. Can't even flash stock ROM as the phone keep disconnecting.
Can't go to fastboot or recovery. Its bricked
You can always go to the Service Center but they will not touch your mobile because your phone is rooted .. If you unroot it also it will have traces so going to service center is a bad idea
I am using a Micromax Canvas HD A116i. I rooted the device properly using KingoRoot.
While trying to flash a new ROM using Mobileuncle tools, the recovery mode won't come up properly.
The device gets stuck on the boot logo screen after trying to reboot normally and also wont go into recovery as the screen pixelates into lines and becomes hazy.
I tried to go into recovery using adb; all in vain.
Please help me.
Sir i got micromax canvas nitro a311 i was using my phone suddenly it started lagging so i rebooted so from tht day it jz keep rebooting every time i start it (boot loop) help i tried too much things now i m fed of it.
i tried it from YGDP tool to flash my phone in guide it says when i start flashing it cell one's icon will change to a download icon then after 80% it cancle automaticly ,sound like phone disconnect to computer plz help me.....
i copied the rom files which YGDP extracted and tried SmartPhoneFlashTool and i get this error.
s_brom_cmd_jump_da_fail (2035)
i tried all thing but while flashing stock rom ygdp tool stuck on entering download mode, what to do? phone have weird problem its almost bricked when i put battery and plug on charge it restart again and again continuously, i dont know what to do please help
Sent from my A310
im having same problem with A311 !! did you get any solution yet?