My device does not boot into Recovery or Download mode.
I am pressing the RIGHT key combinations, at the right time(at the i9100 logo) but the device does not react.
Buttons are working just fine (the phone is new).
Comes with original unmodified firmware:
4.1.2
Baseband:
I9100XXMS2
Build number:
JZO54K.I9100XWLSS
I also tried booting into recovery from ADB, but ADB does not recognise my phone for some reason.
Can anyone help please?
SethPDA said:
My device does not boot into Recovery or Download mode.
I am pressing the RIGHT key combinations, at the right time(at the i9100 logo) but the device does not react.
Buttons are working just fine (the phone is new).
Comes with original unmodified firmware:
4.1.2
Baseband:
I9100XXMS2
Build number:
JZO54K.I9100XWLSS
I also tried booting into recovery from ADB, but ADB does not recognise my phone for some reason.
Can anyone help please?
Click to expand...
Click to collapse
So the phone(system) works?
If the phone works fine, you should be able to get into recovery and download mode. Turn the phone off, then press power, home and vol up at same time and release after the Samsung i9100 screen appears
I know but the key combination is not working. It just doesnt go into recovery at all. Any ideas?
Sent from my D5503 using XDA Free mobile app
SethPDA said:
I know but the key combination is not working. It just doesnt go into recovery at all. Any ideas?
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Does the phone boot?
Yes. Everything works normally, I just cant enter recovery with the key combination :-/
Sent from my D5503 using XDA Free mobile app
SethPDA said:
Yes. Everything works normally, I just cant enter recovery with the key combination :-/
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
This is one option. By doing this, you will have root access. You will have to get a usb jig to get into download mode, and I'm assuming you can connect to a pc and you have the correct drivers installed etc.
1. Download Odin from HERE
2. Download the philz kernel(XWLSS .tar.md5 version) from HERE
3. Run odin on a pc
4. Use the usb jig to enter download mode and connect phone to pc using a trusted data cord.It should say "added" in the box on the left
5. In "PDA" field, put the philz kernel. Press start, then wait for green box "PASSED"
6. The phone should automatically reboot.
7. Go to Play Store and install "Rom Toolbox Lite"
8. Run the app and go to reboot to recovery/download mode
I remember reading that ROM TOOLBOX was incompatible with the S2. From what I read it breaks recovery on the phone.
There is an alternative......you need root for it, but once you *do* have root, visit the playstore for this app.....
https://play.google.com/store/apps/details?id=com.vasily.powermenu
I have used it in the past......
It allows the user to boot into recovery & download modes from the homescreen.....no buttons required.....
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I remember reading that ROM TOOLBOX was incompatible with the S2. From what I read it breaks recovery on the phone.
There is an alternative......you need root for it, but once you *do* have root, visit the playstore for this app.....
https://play.google.com/store/apps/details?id=com.vasily.powermenu
I have used it in the past......
It allows the user to boot into recovery & download modes from the homescreen.....no buttons required.....
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
I use it and never had any issues, but that is another good option
SethPDA said:
My device does not boot into Recovery or Download mode.
I am pressing the RIGHT key combinations, at the right time(at the i9100 logo) but the device does not react.
Buttons are working just fine (the phone is new).
Comes with original unmodified firmware:
4.1.2
Baseband:
I9100XXMS2
Build number:
JZO54K.I9100XWLSS
I also tried booting into recovery from ADB, but ADB does not recognise my phone for some reason.
Can anyone help please?
Click to expand...
Click to collapse
you need push the buttons from start to the i9100 logo that it is the trick to boot ^^
Thanks guys for suggestions. The problem is, I cannot have root, without getting into recovery.
And I know the correct button combination, it just doesn't work.
I say it again: I check, the buttons function normally inside Android. But while booting, it does not do anything.
Is there any way to get ADB debugging to work on jelly bean firmware 4.1.2? From adb, I could reboot into download and recovery mode too.
Right now, ADB does not recognize my device.
Any suggestions?
As a previous poster said, buy a USB jig from eBay (or make one yourself)......
You plug it in to the usb socket (when the phone is switched off) and it forces the phone into download mode without having to press any buttons.....
http://i.imgur.com/rVnFwJM.jpg
Okay so I didn't wanted to buy stuff neither to make my own.
So here's what I did:
I downloaded KingRoot 4.5, and I rooted the phone with it. I downloaded the Quick Reboot app, and now I can enter recovery.
Thanks for your suggestions though. Have a nice day!
Related
Can I get into recovery mode without a working home button? My i9100 has a faulty home button, phone is stuck on a bootloop will not get pass the samsung logo screen. I can flash the phone in odin with a stock rom and finish with success but still get stuck on bootloop. I think if I can get into recovery to wipe data then the phone will boot all the way. Any help is appreciated. I've searched but have found nothing solid. Thanks!
Buy a usb jig off ebay. plug it in then turn your phone on and it will put it into download mode.
e.g.
http://www.ebay.com/itm/Samsung-Gal...445900?pt=PDA_Accessories&hash=item3cbb7b1e8c
tle05 said:
Can I get into recovery mode without a working home button? My i9100 has a faulty home button, phone is stuck on a bootloop will not get pass the samsung logo screen. I can flash the phone in odin with a stock rom and finish with success but still get stuck on bootloop. I think if I can get into recovery to wipe data then the phone will boot all the way. Any help is appreciated. I've searched but have found nothing solid. Thanks!
Click to expand...
Click to collapse
my home button is also broken, let me know if you find a miracle
RealityKill said:
my home button is also broken, let me know if you find a miracle
Click to expand...
Click to collapse
See above.
jayquinten510 said:
See above.
Click to expand...
Click to collapse
well i guess hes already got a jig. was wondering how he got in download mode with a broken home
I can get into download mode by pressing and holding volume down + pressing and releasing power but still holding volume down when turning the phone on. But my question is, how do I get into recovery without home button?
Flash a matching Chainfire CF root kernel via Odin (phone in DL mode). This with install his Cwm app. Once rebooted, run app (give su permission), and choose to boot into either clockwork recovery, dl mode, or reboot.
Edit: But once in recovery, how do you plan to actually select anything when the home button doesn't work? ? ?
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Flash a matching Chainfire CF root kernel via Odin (phone in DL mode). This with install his Cwm app. Once rebooted, run app (give su permission), and choose to boot into either clockwork recovery, dl mode, or reboot.
Edit: But once in recovery, how do you plan to actually select anything when the home button doesn't work? ? ?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
He cant boot up, he's stuck at boot logo so no way to use the cwm from chainfire
Oh dear without the home button it's hard to operate the phone. I think you can boot into recovery mode by using ADB, search on the forums or Google.
I would rather you have the home button replaced ot fixed.
Cheers!
Sent from my GT-I9100 using XDA App
Use can use QtADB to get into recovery - just tried, it works. But the option "flash zip" doesn't work, and of course,................
how do you plan to "select" anything if the home button doesn't work? ? ? Can't think of any way just yet.
---------- Post added at 03:11 PM ---------- Previous post was at 02:49 PM ----------
If you have adb setup, and know how to use it;
1. Copy the Custom ROM.zip to your sdcard folder on the phone
2. Rename to "update.zip"
3. Run CMD and navigate to the sdk tool folder where adb.exe is
4. Run "adb reboot recovery" to enter recovery mode
5. Phone to boots into recovery screen
6. "apply: /sdcard/update.zip"
7. After finish, reboot into new ROM
Haven't tried it myself though on the SGS2 ..............
tried it, didn't work..
Lost my Home button after odin flash HELP
I am stuck a i9100 that has no home working home button after i botched my first odin flash. I can not seem to get the device to be recognized by ADB or ODIN now that its messed up. I can boot into the Android Recovery System e3, and i can move up and down in the menu, but the 'home' button i used to select options no longer works. I can not get it to boot out of that menu.
This is a Sprint branded i9100 from the United States... tho when i got it, it was already 'rooted' with Gingerbread-Eg30 however it did not state the firmware version. So after i used ODIN to ref lash it... it rebooted and killed my home key... Now i am not sure what to do. ADB is not finding the device listed and I can't seem to get it to take a rom. Any suggestions?
Prior to flashing this rom in odin i had a working home key which was used as part of the 3 button combo to ender flashing mode or to select an option in the stock recovery menu.
Any help would be great!
Flash a full wipe rom like stock in download mode that should fix it.
shadowofdarkness said:
Flash a full wipe rom like stock in download mode that should fix it.
Click to expand...
Click to collapse
I am having the same problem. My I9100's home button doesn't work. I had cyanogenmod 10.1 and cwm recovery installed. Used the button saviour app to operate a virtual home button on screen. Updated to cyanogenmod 10.2. nightly yesterday. All seemed working. Today I found that some apps like Google Play and ROM Manager would crash on when started. So I thought I go back to cyanogenmod 10.1. Started the installation of 10.1 from the "about this phone" settings because ROM Manager crashed and I couldn't boot into recovery from the crashing ROM Manager.
So, I now flashed a stock firmware from samfirmware.com with ODIN (because I can get into download mode with the USB-Jig), but that stock rom stucks in a boot loop.
Any suggestions? I believe, I am stuck in boot loop because I couldn't wipe the phone before flashing. Is there any way to wipe it in download mode?
Or can you be more specific, how to flash a "full wipe rom" and post a link where I can download such a rom?
1. Don't use rom manager on i9100, sure way to screw things up /brick.
2. Get the hardware sorted before you muck around with software. As you have found out, it's easy to get into a situation where you need the hardware to function correctly.
3. Download JB leak (stock firmware) from samfirmware and flash it via Odin. It's a 3 part firmware, and will wipe as it flashes.
Sent from a galaxy far, far away
Hello everyone! Here is my problem.
The home button of my gs2 is broken. I knew that some rom have the function that rebooting into recovery mode when power on.
But somehow, I need to boot into recovery mode when power off.
In addition, I've got a item which can help me get into odin mode when power off. The item in Chinese we call it "Wa mei shen qi"~
I would like to know is it able for me to boot into recovery mode with this? Or any other possible way for gs2 from power off state.
Thanks!
saedrna said:
Hello everyone! Here is my problem.
The home button of my gs2 is broken. I knew that some rom have the function that rebooting into recovery mode when power on.
But somehow, I need to boot into recovery mode when power off.
In addition, I've got a item which can help me get into odin mode when power off. The item in Chinese we call it "Wa mei shen qi"~
I would like to know is it able for me to boot into recovery mode with this? Or any other possible way for gs2 from power off state.
Thanks!
Click to expand...
Click to collapse
The "Item" you are talking about could be a USB Jig? As you already said: it will take you into download mode but not recovery mode.
I don't know what you mean to say by
But somehow, I need to boot into recovery mode when power off.
Click to expand...
Click to collapse
Can you tell us why?
For a running device with USB debugging enabled you could run adb reboot recovery to boot into recovery mode. However this is for a running device, not for a device that is powered off.
I don't either fully understand what you're meaning by this.
But as far as i know the only way to access CWM when power off is Power+Home+VolUp, but then ofcourse i'm not a pro at this...yet there could be another way to access Recovery while power off which i haven't found out about.
I don't understand also why you must access Recovery while power off, in your situation (with the home butten broken) it would be easier to get ROM Manager. It has an option to reboot into Recovery mode. Or if you rooted with CF-Kernel, it come with a CWM app that let's you choose if you want to reboot normally, reboot into download mode or reboot into Recovery mode.
and if i may ask, what do you mean by Odin mode? Is it download mode?
fxrb said:
The "Item" you are talking about could be a USB Jig? As you already said: it will take you into download mode but not recovery mode.
I don't know what you mean to say by
Can you tell us why?
For a running device with USB debugging enabled you could run adb reboot recovery to boot into recovery mode. However this is for a running device, not for a device that is powered off.
Click to expand...
Click to collapse
Thanks for your informations.
The reason is that I flash a rom in Odin mode, but after that I can't get powered on, it always remains in the starting animation.
I've been in this situation many times, for every time, a wipe data / factory reset in recovery mode will fix the problem. However the problem arises, for this time, my home button is broken.
And I've tried a lot of other roms from Odin mode, it still remains in the starting animation. So I really need a wipe in recovery mode badly.
The "item" may be the same with USB jig from your description.
CashAndPotatoes said:
I don't either fully understand what you're meaning by this.
But as far as i know the only way to access CWM when power off is Power+Home+VolUp, but then ofcourse i'm not a pro at this...yet there could be another way to access Recovery while power off which i haven't found out about.
I don't understand also why you must access Recovery while power off, in your situation (with the home butten broken) it would be easier to get ROM Manager. It has an option to reboot into Recovery mode. Or if you rooted with CF-Kernel, it come with a CWM app that let's you choose if you want to reboot normally, reboot into download mode or reboot into Recovery mode.
and if i may ask, what do you mean by Odin mode? Is it download mode?
Click to expand...
Click to collapse
Yes, for Odin mode, I mean the download mode.
The reason that I need to boot into recovery mode is given in #4. And thanks for your information , but I really need to boot into recovery mode to do a wipe data / factory reset to save my gs2.
boot into recovery/download mode
..so u have a bootloop & ur home-btn is broken..
am i right?
the jig would bring you to dowload mode
install via odin ur rom with repartition..
u will need a 3-parted rom
that should solve your problem..cause i think theres no way to come into the recovery mode if u have a bootloop
[email protected] said:
u can use an app to boot into recovery/download mode
just look at the marketplace which you prefer
- i use stweaks from sieya kernel
the jig would reset the counter and bring you to dowload mode
Click to expand...
Click to collapse
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
probably this posting can help you..
fixing guide
I believe adb can be used when the animation starts, haven't checked it.
Click to expand...
Click to collapse
Yes, adb can be used during boot, but only if USB debugging was enabled before.
Spiralzz said:
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Umm~This may work if adb.exe can get connected with my phone in booting animation. I'll try it later.
You must press on button for a few seconds then click on reboot then take recovery.
Sent from my GT-I9100 using xda app-developers app
you can also use an app called [ Anreboot.apk ] but you must have a root permission ok
Spiralzz said:
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've tried this with adb tool in andriod development SDK.
However during the booting animation, even if Windows Device Manager detect Android ADB Interface, "adb devices" shows no adb connections.
Maybe the only way for me is finding a rom with auto wipe after flashing it by ODIN.
The only way you can get this fixed is get your phone-home button fixed in a samsung repair center ma8..
There's no other way you can go to recovery mode without the home button use...you can use th usb jig only to go into download mode!. Hope this helps.
saedrna said:
Hello everyone! Here is my problem.
The home button of my gs2 is broken. I knew that some rom have the function that rebooting into recovery mode when power on.
But somehow, I need to boot into recovery mode when power off.
In addition, I've got a item which can help me get into odin mode when power off. The item in Chinese we call it "Wa mei shen qi"~
I would like to know is it able for me to boot into recovery mode with this? Or any other possible way for gs2 from power off state.
Thanks!
Click to expand...
Click to collapse
is u r fone rooted. if yes u can use cwm recovery to boot into recovery mode
Bala_2668 said:
is u r fone rooted. if yes u can use cwm recovery to boot into recovery mode
Click to expand...
Click to collapse
Please read this before posting:
Spiralzz said:
He can't boot, so that is no option for him unfortunately.
I believe adb can be used when the animation starts, haven't checked it. If so, simply do adb reboot recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
He is simply not able to boot the device so how do you expect him to go into recovery with a broken home button?
Anyone got any idea how the hell I can flash stock rom onto my g/fs s2 i9100p without a working volume up button.
it doesn't connect to Kies either (suspect Orange bloatware blocking it.
fbunnyuk said:
Anyone got any idea how the hell I can flash stock rom onto my g/fs s2 i9100p without a working volume up button.
it doesn't connect to Kies either (suspect Orange bloatware blocking it.
Click to expand...
Click to collapse
Up button is for recovery. If you want to flash sammy stock rom you need to use volume down and enter download mode so you can flash via ODIN.
TheATHEiST said:
Up button is for recovery. If you want to flash sammy stock rom you need to use volume down and enter download mode so you can flash via ODIN.
Click to expand...
Click to collapse
yep volume down for recovery then asks you to press volume up to continue!
Think a usb jig bypasses the up to continue (cant be arsed checking though).
"noob ok...lazy noob not ok"
fbunnyuk said:
yep volume down for recovery then asks you to press volume up to continue!
Click to expand...
Click to collapse
Ah yeah, sorry forgot about that.
In that case your screwed, nothing you can do except get the button fixed.
There is one solution if you have root and that is to install Mobile Odin and start the flash of md5 via that.
depending on what rom, some developers have installed the 4 way menu which will allow you to access download/recovery mode through the power button, you will not need a working volume up button except to navigate up on non touch recoveries.
Cosmic Blue said:
depending on what rom, some developers have installed the 4 way menu which will allow you to access download/recovery mode through the power button, you will not need a working volume up button except to navigate up on non touch recoveries.
Click to expand...
Click to collapse
Good point. He could still navigate but will just need to keep going down until diverted back to top if needed.
There is plenty of apps in the store that can reboot into recovery/download modes like Hot reboot for example.
This is orange stock rom.
According to some websites I can use a command line ADB to push it into recovery even without root.
Going to try tonight when I get home.
tried it at home and works fine.
switch the phone into usb developement mode and then simply use adb to reboot it into recovery/download modde
adb reboot recovery
adb reboot download
ICS 4.04 now on the girlfriends S2 now
Hey guys, I really need help with my situation. I've been looking all over the forums for 2days straight trying to find solutions to my problem. I have a galaxy s2 i777 and I had the sho-stock3 rom. Then I decided that I wanted to back up my rom, so I used rom manager to do it. that's when the problem started. when the phone tried restarting it was stuck where it says "galaxy s2" with the yellow triangle. I put it into download mode and tried to flash siyah kernel..it worked..but when I tried to reboot my phones says "firmware upgrade encountered an issue, please select recovery mode in kies and try again. of course kies wont let the phone connect. and yes all the drives are installed for my phone. now i'm just stuck trying to flash stock firmwares for the phone and the stock rom but it always fails in odin. please help me!!!!!
Hours76 said:
Hey guys, I really need help with my situation. I've been looking all over the forums for 2days straight trying to find solutions to my problem. I have a galaxy s2 i777 and I had the sho-stock3 rom. Then I decided that I wanted to back up my rom, so I used rom manager to do it. that's when the problem started. when the phone tried restarting it was stuck where it says "galaxy s2" with the yellow triangle. I put it into download mode and tried to flash siyah kernel..it worked..but when I tried to reboot my phones says "firmware upgrade encountered an issue, please select recovery mode in kies and try again. of course kies wont let the phone connect. and yes all the drives are installed for my phone. now i'm just stuck trying to flash stock firmwares for the phone and the stock rom but it always fails in odin. please help me!!!!!
Click to expand...
Click to collapse
Don't use rom manager again
Sent from my SGH-I777 using Tapatalk 4 Beta
Can you get in either cwm recovery or download mode?
Sent from my SGH-I777 using xda app-developers app
Teknodad1974 said:
Can you get in either cwm recovery or download mode?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
yes i can get into download mode only by holding down on vol and plugging in the usb...no i cant get into cwm recovery
Try this page...
http://forum.xda-developers.com/showthread.php?t=1511906
Sent from my SGH-I777 using xda app-developers app
Teknodad1974 said:
Try this page...
http://forum.xda-developers.com/showthread.php?t=1511906
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
thank you, my phone is back again!!
Sweet enjoy your phone buddy!
Sent from my SGH-I777 using xda app-developers app
Hours76 said:
yes i can get into download mode only by holding down on vol and plugging in the usb...no i cant get into cwm recovery
Click to expand...
Click to collapse
this SAVED me...I couldn't get it into download mode for the life of me and that worked. I now have the correct i777 JB file (I accidentally flashed the wrong version). back in the game!
Help
sbello81 said:
this SAVED me...I couldn't get it into download mode for the life of me and that worked. I now have the correct i777 JB file (I accidentally flashed the wrong version). back in the game!
Click to expand...
Click to collapse
Hello
My friend just gave me I777 with this problem cause he bought a new phone, he couldn't tell me exactly when he got that "connect to kies". I never flashed anything or installed any rom's, I just want to get it back to life. Any solutions for me?
Fratula said:
Hello
My friend just gave me I777 with this problem cause he bought a new phone, he couldn't tell me exactly when he got that "connect to kies". I never flashed anything or installed any rom's, I just want to get it back to life. Any solutions for me?
Click to expand...
Click to collapse
Can you put the phone into download mode? I would assume the answer is yes if you still get the "connect to kies" message. Following are detailed instructions for getting into download mode.
Download Mode:
There are several ways to put the phone into download mode. You should try all of them that you can before you give up.
Recovery mode:
With the phone off (and not connected to the computer), and battery installed, hold all three buttons, vol- vol+ pwr continuously until the initial boot screen appears the second time.
Download mode:
1. With the phone off and connected to the computer via USB cable, and battery installed, hold all three buttons, vol- vol+ pwr.
2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.
3. With the phone off and battery installed, hold vol- (but not vol+ or pwr) while plugging in the USB cable.
4. Attempt each of the above three options with the battery removed from the phone. The computer will supply the power to the phone.
5. Use Android Debug Bridge (adb) which will only work if USB debugging has been already turned on in Developer Options, since you can't boot into the system to turn it on. With the battery installed and the phone connected to the pc via USB cable, use the command "adb reboot download".
6. Use a USB jig. With the battery installed insert the USB jig into the USB connector of the phone. Some have reported that this method works when no other method would work.
If the phone will go into download mode, you will need to use Odin desktop to flash the stock firmware. You should use the latest stock firmware. Go to the Download Repository and download Odin3 v1.85 from the link near the top of the page, and also download the latest stock firmware, "I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean)" from near the bottom of the page. It's the next to last item. Download both to your Windows pc, and then follow the detailed instructions below to flash it onto your phone.
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) When complete, you will get a PASS (or FAIL if unsuccessful).
The phone should boot up normally. If it does not, enter recovery (see instructions in the download mode section) and perform a wipe data/factory reset.
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...