I've searched trough the forums for days now but was unable to find the right solution, so I'm in need of advices and guiding.
I recently got a Huawei Mediapad S7-301u, which I think is soft bricked. It keeps restarting over and over again. I'm able to enter only into fastboot mode I think. Tried to get into recovery mode without success. Text on device screen: Entering fastboot mode, press power for more than 10 seconds to restart.
When I connect it to my PC -running Win10- , fastboot devices command lists it. (Installed Minimal ADB and fastboot software found in the forums.)
I'd like to just get it working again, a stock ROM is okay. It doesn't matter if data is lost or not.
As far as I know it's an almost unused tab, probably been running 3.2JB on it.
If somebody could kindly write the detailed steps to make it work again or point me to a guide how to exactly do it, I'd be glad.
Related
Hi!
First off let me say thanks to R_a_z_v_a_n for redirecting me and hope that I'll find my answer here ^^
So I Have this device called HP 7 VoiceTab 1321RA (not with Slate just HP 7 Voicetab), wanting to have a custom recovery then I tried to flash a CWM Custom Recovery for HP Slate 7 VoiceTab because I thought it was the same and ends up bricking my phone. It ends up in a bootloop which only shows HP sign for a few seconds and dead. But I managed to find out that I can access the recovery menu (or so I thought it is), but the options was choosing between Fastboot Mode, Normal Boot, Recovery Mode, and VART Mode.
I tried to enter Fastboot Mode before and tried to access it via PC but somehow I can't find the device by entering adb devices and fastboot devices. Anyways, I have downloaded a stock update.zip for it but not the original KitKat one which I get from the first time I bought it but rather the JB ones. I think by flashing this would help me recover the device but the only problem is I don't know which method should I use to Flash it. Since I don't have the Stock Recovery or ANY kind of recovery at all, I guess I'm stuck. And it won't start to the home page so I can't set the USB debugging options. Please guide me through this >.<
Thanks a lot!
Been fighting with it for 2 days now and still no result came.
So here's the update so far....
I tried on my other device in order to understand how my PC reads ADB and now I kinda gets it. But the problem is now can't get the device to enable USB Debugging because I can't access options at all.
Secondly, since I left it on for the night because charging seems to trigger the bootloop too, now I can't access the fastboot mode like I was last night. And it constantly repeating this sequence: [battery scene with the "charging battery" symbol] > [HP Powered by Android screen] repeated for 2-3 times > [low battery need charging screen] > repeat. And once I tried to connect to the PC, it goes to the same sequence too. When I tried to access the boot options (the screen which displays Fastboot Mode, Normal Boot, Recovery Mode, and UART Mode which I mention in Thread Starting post), it shows the low battery need charging scene and then repeating the same sequence as mentioned above.
I seem to figure out how to fix this but I still can't manage to access the fastboot mode yet. Will give update once I can try to.
Anyone can help me on this?
Thanks a lot!
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
I found my self in a deadlock!
PLEASE HELP :crying:
Could you unbrick yours
What service centre says about that problem i also ran in this problrm but i m trying to go to service centre for that
first off install drivers in your PC as admin
then use the official flashtool to flash ur stock firmware by entering fastboot or flashmode simple as that
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
Dude urs is a mtk device so sp flash tool should do the trick.... Just don't forget to install correct drivers....run both drivers and flash tool as admin..... Tell me when it's solved k
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
That is what im trying. To tell you urs is a mediatek device the official flashtool is sp flashtool
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
try to push the update.zip via adb sideload (Choose "update via ADB sideload" on recovery mode)using adb terminal on PC,as long as your tab can access the recovery mode.remember to backup all your data before u do it.
have a try it's 100% work on me
where I can download update.zip file? anyone can help?
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
can you explain how did you managed to charge the device??? please its a request......jst help me out :crying::crying:
I tried to install new ROM on my Huawei S7-301u, i used CWMR and delete everything i should and started installation of ROM. Suddenly, od 30-40% installation broke. Of course, everything is deleted, and when I press Power&Volume+ i get message "Enter into fastboot mode. You can press POWER key for more than 10 seconds to reboot device." My PC can not recognize tablet when I connect it with USB cable (only in tray i can eject Android).
Can I fix it and how? Can I start CWRM from SD card? Can I install ROM from my PC? Any solution?
Thanks for help.
You certainly can install from your PC! Do as it says and boot into fastboot, then download the firmware of your device. (I can't post links, but a quick search of "Huawei Mediapad S7 Firmware image" should get you what you need)
You'll also need adb and fastboot (another quick search will get you those too).
At that point you should have a device in Fastboot mode and a computer with fastboot installed.
You'll be able to use commands such as "fastboot flash system system.img" to reflash your phone back to normal, from which you can restart your Custom ROM installation.
Again, I can't post links, but googling "How to flash an android .img" may help you greatly.
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
I'm stuck with this problem too. The exact problem. Have you found a way to fix it?
I have exactly the same problem with my Huawei Tablet.
If I boot with the original ROM and look in the "/log" - directory with adb shell, there is a cust.log. The contents say, that the specific ROM is not original or factory.
I think even the bootloader is unlocked, there is a kind of signature checking.
EDIT: @Asdforcer: Have you tried to boot the original boot.rom with "fastboot boot" - command?
How to remove FRP on Huawei Y6 TIT U02
Hi,
Since I try to update firmware from HUAWEI website, my phone comes non stop booting (bootloop). Any one can help me how to fix my phone?
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Try to unlock your bootloader
Hi i recently got a M5 mediapad 8.4 at an auction but the device is locked to the energy company EE in the UK. When it powers on it asks to verify your google account. It says "To continue, sign in with a Google Account that was previously synced on this device".
Is there any way to reset this or bypass this so i can use the tablet? Or is the tablet unusable?
Sorry i'm a noob at all this. Any help would be appreciated.
Thanks
I'm not sure but if you restart the M5 in recovery mode, can you factory reset it??
Yeah i've restarted in recovery mode and what i mentioned is what happened. Is there any other possible solutions you can think of please?
And thanks for the quick reply too.
Perhaps you could try via fastboot, i found this.
Thanks again for replying.
I'm trying to factory reset my m5 to bypass the google verification to remove the frp protection so i can use the m5.
I bought my huawei mediapad m5 8.4 from an auction and i didn't realise it is locked to an energy company EE in the UK.
I've tried pressing volume up and power button to pull up the hard reset options menu but it desn't come up on this device. I have a huawei phone too and i can pull it up on my phone but not on the m5. When you power it on the huawei logo doesn't come up only the EE logo.
I've tried youtube videos but it doesn't work.
So i decided to reset it in Fastboot mode.
I've followed all your instructions and installed all the usb drivers and adb and fastboot drivers on my windows 10 for my huawei m5 mediapad and then typed in the prompts as shown on your web page but i get error: device '(null)' not found on the command prompt.
Is there any help you can give please so i can use my m5?
Thanks any help would be greatly appreciated.
Sorry i copied and pasted the msg i sent on droidrecovery.com where i found the instructions and the drivers to hard reset it in Fastboot mode.
I'm beginning to think that once it's been locked to a company you can't unlock it or hard reset it to use it without having the original users sign in info.
i can't pull up recovery mode to factory reset it
My idea was to use Hisuite to flash a full stock Huawei firmware, but the fastboot mode is important.
So if your M5 is off, push volume up then connect it to usb (PC), doesn't it go in fastboot mode?
massima said:
My idea was to use Hisuite to flash a full stock Huawei firmware, but the fastboot mode is important.
So if your M5 is off, push volume up then connect it to usb (PC), doesn't it go in fastboot mode?
Click to expand...
Click to collapse
Yeah it goes into fastboot mode. i then used command prompt to reset it that way but i just get the " error: device '(null)' not found "
I didn't try HiSuite yet. I'll give that a go tonight. thanks again, i'll keep you posted
i think the possible problem with the fastboot mode is possibly the m5 isn't in ADB Debugging mode which i can't access to change.
Hi again Massima, so funnily enough after installing Hisuite on my pc i was able to enter safe recovery mode and then factory resetted the tablet and cache. I then rebooted it and i still had the same problem, i was on the Google verification screen again, the FRP protection.
It was during this process i realised my tablet wasn't just an m5 it was a Harrier Tab from EE. I'm not even sure what that means and if the tablet is an m5. That was what is was advertised as, on the auction.
So i googled how to bypass google protection on Harrier Tab from EE. And a youtube video came up which i promptly followed step by step and hey presto i've bypassed the protection and can now use the tablet!!
Haha i've had this tablet for almost a year now and never knew to try youtube. I came across the xda forum last april and was meant to sign up so i could post this problem to see if i could get help. It took me this long to do it and finally because of the process i just went thru i finally unlocked it!
Tbh i didn't even need to come here. All i needed to do originally was google how to bypass google protection on Harrier Tab from EE and i could've had this working a year ago!!!
So to cut a long story short thanks to you for helping me go thru what i did to realise it was a Harrier Tab lol
Thanks for your help Massima i really appreciate you taking time to help
Hi everyone! So, I have an Huawei Mate 10 lite that suddenly stopped working. It isn't rooted and its bootloader is locked. It was working fine up until that point and then it turned off starting a bootloop that is still going on after a long a time.
Since going into fastboot&rescue is the only shortcut key that seems to be working, I tried doing what it said "Please connect USB cable to your computer and open Hisuite". However, HiSuite says that is cannot support system recovery in my phone which is simply hilarious...
I tried putting and update.app file on a dload folder in the root of the sd card after seeing some people suggesting that - but I can't access the upgrade mode (volume up and down + power does absolutely nothing). Also, since Huawei decided they should just turn their backs on this phone, all download links to the update roms are down and I had to download it from a Russian website - perhaps it not being the correct version is the problem with me not being able to go into upgrade mode, but I honestly have no idea how to even get another version.
I tried flashing through adb but since the bootloader is locked, it gives me a "command not allowed" message.
Going into recovery is impossible, it goes into bootloop also, just like upgrade mode.
I'm getting quite desperate since nothing seems to be working... Please, if you have any suggestions, HELP! I'll be throwing this damn thing against a wall if I'm not able to fix it soon