Just got it, but would like to watch movies on my TV. I have chromecast but i wanted a wired solution to eliminate any lag.
I know the phone has MHL 3.0, but I have a 5 year old Samsung non-smart TV.
which MHL cables can I use? My only requirement is that the MHL adapter should NOT need power. Basically looking for something like the iPhone HDMI/Lighting adapter, or the Samsung MHL 2.0 cables that didn't require power.
Thanks in advance.
Something like this: http://www.amazon.co.uk/LINDY-MHL-H...e=UTF8&qid=1445628106&sr=8-1&keywords=MHL+3.0
"Additional USB Micro-B female for charging & power"
In my experience, MHL requires power, I don't think the phone pumps out enough to power the HDMI without it. That might not be conceptually correct, but every lead I've ever tried will only work with power connected anyway.
somebloke said:
"Additional USB Micro-B female for charging & power"
In my experience, MHL requires power, I don't think the phone pumps out enough to power the HDMI without it. That might not be conceptually correct, but every lead I've ever tried will only work with power connected anyway.
Click to expand...
Click to collapse
MHL 3.0 do not require external power, the port is there for compatibility with MHL 2.0 & 1.0 phones or if you want to charge the phone while using the adaptor.
This adaptor works fine without external power on my Z5C
Somebody gave me this .
MHL Micro USB to HDMI HD TV Adapter Cable Samsung Galaxy S3 S4 S5 Note 2 Tab 3 (from ebay)
needless to say, it doesn't work with my Z5c, it even says so in the description. Is this because the cable is not MHL 3?
Samsung uses a different number of pins I think.
Also, doesn't the receiving device have to support MHL?
limduldk said:
MHL 3.0 do not require external power, the port is there for compatibility with MHL 2.0 & 1.0 phones or if you want to charge the phone while using the adaptor.
This adaptor works fine without external power on my Z5C
Click to expand...
Click to collapse
Good to hear MHL 3.0 doesn't require external power but it might be the power output on Z5c usb port is higher. Are you sure it doesn't has any problem because when I'm reading the customer reviews I found that.
"I'm usually a fan of Lindy products and have bought a lot in the past, but this adapter has a critical flaw and I'm appalled that they have decided to sell it anyway. When connected to either my Xperia Z1 or Z5 it creates so much interference with the mobile network signal that it the signal completely cuts out. Meaning I can still share the screen, but not stream any content. A quick look on Google confirmed that the adapter is the cause, and cheap knock-off active MHL adapters often do this."
TheEndHK said:
Good to hear MHL 3.0 doesn't require external power but it might be the power output on Z5c usb port is higher. Are you sure it doesn't has any problem because when I'm reading the customer reviews I found that.
"I'm usually a fan of Lindy products and have bought a lot in the past, but this adapter has a critical flaw and I'm appalled that they have decided to sell it anyway. When connected to either my Xperia Z1 or Z5 it creates so much interference with the mobile network signal that it the signal completely cuts out. Meaning I can still share the screen, but not stream any content. A quick look on Google confirmed that the adapter is the cause, and cheap knock-off active MHL adapters often do this."
Click to expand...
Click to collapse
I haven't used it that much yet, only to display content from the phone's SD card. I'll give it a test tonight, to see if there are any problems with network signal while using the adaptor.
TheEndHK said:
Good to hear MHL 3.0 doesn't require external power but it might be the power output on Z5c usb port is higher. Are you sure it doesn't has any problem because when I'm reading the customer reviews I found that.
"I'm usually a fan of Lindy products and have bought a lot in the past, but this adapter has a critical flaw and I'm appalled that they have decided to sell it anyway. When connected to either my Xperia Z1 or Z5 it creates so much interference with the mobile network signal that it the signal completely cuts out. Meaning I can still share the screen, but not stream any content. A quick look on Google confirmed that the adapter is the cause, and cheap knock-off active MHL adapters often do this."
Click to expand...
Click to collapse
3G and WiFi works fine with Lindy MHL adaptor, just tested it
Related
Did anyone receive the HDMI adapter in the box for the AT&T Galaxy S II ? I read that it should be included but did not receive it.
Nope. Not in the AT&T box
10 char xxxx
Nope. It doesn't come with AT&T version. AT&T version, all you get is the phone, battery, ac charger, usb cable, $25 media hub (tv shows only), manuals.
The infuse comes with one. The galaxy doesn't included one.
Sent from my SAMSUNG-SGH-I777 using XDA App
So a MiniUSB (or microUSB, whatever is ours) --> HDMI cable works from the phone?
only if your tv has MHL built into it
boondoc said:
only if your tv has MHL built into it
Click to expand...
Click to collapse
curoius, do most newer tv's have MHL built in? or probably not?
all i can find when i type my tv's model number and MHL into google is.. my tv with some hockey info (NHL) hehe..
google is too smart for its own good sometimes.
Based upon what I've seen, you need a MHL adapter for the phone. Its just a little box that plugs into USB, and had a USB port on it for power input and an HDMI port. There's cheap out there, like this one.
I have an MHL adapter and it does work but you need to plug the power into the thing in order for it to do anything. My receiver has usb and hdmi on the front so that works for me. It would be nice to have 1 cable, but this works.
Unfortunately I believe that's the case with any MHL device. There's a chip inside that box that transcribes the MHL signal (coming over the 5 pin USB connector) to a full HDMI signal, and it requires power. It's not all that bad though, as you would probably want to be charging your phone while playing a video anyways.
Exactly it is nice it does have power. Unlike the ipad to vga dongle lol.
Eventually most of the high end TVs will have the MHL. You will still need the adapter but you will not need to power it. The TV will not only power your phone but charge it.
I pocketed the HDMI MHL adapter from my infuse when I returned it under the 30 day ATT trial... The screen was pixelated in my infuse in the top left hand corner so they were more concerned with my device being defective than me just not liking it and only asked me if the charger was in the box.
Honestly, who actually hooks their phone to their tv? I never have.
yeahmon said:
Honestly, who actually hooks their phone to their tv? I never have.
Click to expand...
Click to collapse
The treadmills at my gym have lcd 's on them, I hook up my phone to it every single day and watch videos while exercising.
I wonder if anyone can report on this:
dealextreme.com/p/mini-usb-on-the-go-host-otg-adapter-2-pack-50944
USB->HDMI adapter for SGS2?
I'm inclined to give it try...
The above link is for connecting a USB device, such as a thumb drive or keyboard to a mini USB device. Useful for us? yes. Useful for hdmi output? No.
Hey guys,
Just wondering if there is a way to get the hdmi mirroring to work without the power cable plugged in.
A little about my phone: hboot 1.4, rooted. Im using Deck's sense ROM (i know it's old, but it is really stable) and using Ziggy kernel. Overclocked to 1.8ghz.
Yes and no. A tv supporting mhl will power your phone and just requires the mhl cable which is usb to hdmi. However, the mhl adapter, which is different than the mhl cable, does require power. What the difference is is the adapter is converting the signal so the tv sees it as hdmi. Because the adapter is doing the work, it needs a power source. Very few tvs support mhl natively. I think it just came out this year in consumer tvs. And when you do get a tv supporting mhl natively, you may have to ditch the adapter and use the normal mhl cable, but I'm not for sure. I'm sure you could still use the adapter, but it would probably still require power.
Sent from my PG86100 using XDA App
what he said
vt_hokie2008 said:
what he said
Click to expand...
Click to collapse
___________
gk1984 said:
Yes and no. A tv supporting mhl will power your phone and just requires the mhl cable which is usb to hdmi. However, the mhl adapter, which is different than the mhl cable, does require power. What the difference is is the adapter is converting the signal so the tv sees it as hdmi. Because the adapter is doing the work, it needs a power source. Very few tvs support mhl natively. I think it just came out this year in consumer tvs. And when you do get a tv supporting mhl natively, you may have to ditch the adapter and use the normal mhl cable, but I'm not for sure. I'm sure you could still use the adapter, but it would probably still require power.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
wow, thank you so much! That cleared up a lot.
I'm running into this problem, I had the 3D hooked up to the TV via mhl adapter, and the power plugged in. I was streaming netflix (wifi) to the TV. After 2 hours, my battery went from 98% to 23%.... Any idea as to what gives? When it comes to mirroring, OG Evo was far superior.
Thanks
nubie said:
wow, thank you so much! That cleared up a lot.
I'm running into this problem, I had the 3D hooked up to the TV via mhl adapter, and the power plugged in. I was streaming netflix (wifi) to the TV. After 2 hours, my battery went from 98% to 23%.... Any idea as to what gives? When it comes to mirroring, OG Evo was far superior.
Thanks
Click to expand...
Click to collapse
I think the power drain is from powering the mhl adapter. I'm not 100% sure of the amount but I think it's 5 volts you get through usb. Figure that's what the phone uses to charge. But now the adapter needs that power for the signal now too. So now you're splitting that 5 volts between the 2 devices. This wouldn't be such a big deal if the screen could be turned off the phone but that kills the mirroring. Because the screen is on, you're drawing mode power.
Another example of charging while using the phone. If I drive using Gps, Pandora, and leave the screen on, I may gain 1% battery increase in 30 minutes driving vs maybe 10% if the phone were just sitting there asleep. Both using Gps and mhl adapter involves the phone actually working, thus using power. The difference is the mhl adapter needs power too so a portion of the charge isn't going to the phone to begin with.
Sent from my PG86100 using XDA App
Picoprojector
Hello,
To use a pocket picroprojectors like the Microvision ShowWX+ HDMI on my galaxy note or S2 I need to power the converter. it's very bad iPhone can do video out without external power.
I guess the ship used inside this converter is the SiI9292 MHL-to-HDMI Bridge. I need to power it without power the phone (cut MHL VCC line on PCB ?)
The adapter is not expensive I want to check this... For me the power requirements of the cable is low, But if the phone require power to enable video out my hack is not possible
English is not my native language, so I'm sorry for mistakes.
Pascal
serveurperso said:
Hello,
To use a pocket picroprojectors like the Microvision ShowWX+ HDMI on my galaxy note or S2 I need to power the converter. it's very bad iPhone can do video out without external power.
I guess the ship used inside this converter is the SiI9292 MHL-to-HDMI Bridge. I need to power it without power the phone (cut MHL VCC line on PCB ?)
The adapter is not expensive I want to check this... For me the power requirements of the cable is low, But if the phone require power to enable video out my hack is not possible
English is not my native language, so I'm sorry for mistakes.
Pascal
Click to expand...
Click to collapse
Is there a question here?
And was there really a need to bump a 3 month old thread? And this is the Evo 3d section, not the Galaxy Note section.
HDMI out without Power IS Possible.
This is not a question this is search for solution, didn't notice the date (noob sorry). This thread is #1 referenced on google for :
mhl without power
hdmi without power
This is a generic MHL question, for all MHL phones.
I just realized a DIY tiny self powered MHL to HDMI adapter for my (showwx+ laser) picoprojector with PCB from a chinese adapter.
This could give some information to DIYer that want to make a self powered adapter for picoprojector.
The HDMI out work without charging the phone. I just unsoldered the VCC (red) wire from MHL side of adapter.
The hdmi bridge need 60mA on 5V (0,3 watt) and can work @ 3 - 3.3V. I used a very tiny LiPo (1 cell 200mA) to power it. Now it need a tiny charge and discharge controller. It work for >1 hour (deep discharge <3V can killl the small LiPo).
Pascal
Another, cheaper and easier, option is to use a portable battery. Preferrably one with an on-off switch so that it'll keep charging the adapter even when the phone is fully charged. The other variety will shut itself off when the phone itself is full.
I had bought a $10 portable battery from Newegg that I throw in my car for occasional use. When I use it for MHL when on the go - I use a retractable usb cable to connect it to the MHL adapter. The portability is pretty decent, since the battery itself is less than half the size of the phone.
Hey there, i have tried gathering information about this subject and it seems all threads always lead to this announcement:
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Short: Samsung have changed to an 11 Pin-out to enable USB OTG and MHL Hdmi out at the same time. I purchased an original HDTV Adapter (EPL-3FHUBEGSTD) which as far as i can reliably count indeed has about 11 connectors inside the USB connector that goes into the phone.
Now, i can get HDMI out just fine, but ONLY when i also connect the MHL adapter to a power source (a PC USB Port will do fine), however i have also read, that the phone is able to power the MHL adapter itself but obviously would not be charged then (no surprises there). This does not work however.
Further, connecting a USB OTG cable to the micro usb port on the MHL adapter does nothing. No notification and no devices connecting. No power either, since the LED on my USB Hub does not light up as it should. Connecting any devices to the hub does nothing to change that situation. If i leave out the MHL adapter and connect the USB OTG cable directly to the phone, everything works perfectly. I have tried this with 2 different OTG cables so they are not the problem.
This is an original genuine HDTV Adapter for our phones, which according to that post should be working fine with USB OTG.
AFAIK, this topic --does-- come up more frequently now as i can find a few more discussions about it, albeit none really helpful:
http://android.stackexchange.com/qu...-of-11-pin-mhl-connector-in-samsung-galaxy-s3
http://forum.xda-developers.com/showthread.php?t=1743128
http://forum.xda-developers.com/showthread.php?t=1803079
http://en.wikipedia.org/wiki/Mobile_High-Definition_Link#11-pin_MHL-USB_Connector
http://forum.xda-developers.com/showthread.php?t=1811435
That wiki entry is the most interesting link as it definitely states that using MHL and USB OTG simultaneously is possible and is also the reason why the 5 pin layout was changed to an 11 Pin layout.
Looking forward to reading your replies!
the ability to use MHL and OTG simultaneously would give the S3 so much more purpose. It is powerful enough to replace a desktop computer used only for light stuff like browsing and watching videos, and even simple gaming. If samsung made a dock like the one for the motorola atrix I'm convinced they will broaden their target group. The atrix got everything right with this but is inferior hardware wise. I love the idea of a one device for everything concept. Unfortunately it doesn't rhyme very well with the growth society.
Love the MHL and the OTG is even better only after I got the correct cables as the cables changed on S3 to the S2 version, unlimited space for watching films on my phone is now awesome and even better connecting it to to the TV just need a good dock,
is there perhaps any expert advise on this? According to multiple sources it should work but really doesnt. Did i buy the wrong mhl adapter?
I think they will only both work together when being used with an MHL enabled tv. That way the power comes from the tv and the usb on the adapter can be used for the usb-otg cable.
Sent from my GT-I9300 using Tapatalk 2
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
joysleep said:
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
Click to expand...
Click to collapse
I think you already got a reply in the other thread on this, you should use subscriptions.
mertzi said:
I think you already got a reply in the other thread on this, you should use subscriptions.
Click to expand...
Click to collapse
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
joysleep said:
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
Click to expand...
Click to collapse
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
mertzi said:
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
Click to expand...
Click to collapse
I have recently received an MHL connector (5 pin type) and the samsung 11 to 5 pin adapter for it. I can confirm that if I plug my OTG cable into it, and then into my powered USB hub, I can get the MHL to work just fine, both video and audio. The OTG cable powers it just fine, but does NOT allow me to use other devices attached to the USB hub.
I am still researching. I suspect you need to bring all 11 pins off the phone with a splitter of some sort, or possibly wire data lines through the MHL. Probably not with the 5 pin MHL connector and 11 to 5 pin adapter, but with the full 11 pin MHL adapter. I am not up to that level of hardware hacking. I suspect whoever does it first can sell a BUNCH of them!
Oh, and I have a Moto Lapdock for my Raspberry Pi, and would love to hook my S3 to it too!
Scott
I was under the impression that Note 3 supported MHL 2.0 but when I plug in the official HDTV adapter from Samsung (model number ET-H10FAUWEGWW) I still need to also use a USB charger to get it to show through the HDMI input on my TV?
If I don't I get a continual on-screen message on the phone "HDMI cable connected/disconnected" flashing/cycling until I plug-in the Micro USB charger cable on the side of the HDTV adapter.
Any thoughts appreciated
Your TV would have to have the MHL adapter which would mean you would have had to buy it most likely this year. If you are just plugging it into a regular HDMI slot there is not power available this is why you need to hook up the adapter.
arsmithsr said:
Your TV would have to have the MHL adapter which would mean you would have had to buy it most likely this year. If you are just plugging it into a regular HDMI slot there is not power available this is why you need to hook up the adapter.
Click to expand...
Click to collapse
Thanks, didn't see that anywhere in the small print or YouTube reviews. Looks like I need a new tv, lol.
Sent from my SM-N9005 using Tapatalk
optical10 said:
I was under the impression that Note 3 supported MHL 2.0 but when I plug in the official HDTV adapter from Samsung (model number ET-H10FAUWEGWW) I still need to also use a USB charger to get it to show through the HDMI input on my TV?
If I don't I get a continual on-screen message on the phone "HDMI cable connected/disconnected" flashing/cycling until I plug-in the Micro USB charger cable on the side of the HDTV adapter.
Any thoughts appreciated
Click to expand...
Click to collapse
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
optical10 said:
Thanks, didn't see that anywhere in the small print or YouTube reviews. Looks like I need a new tv, lol.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
You definitely do not need an MHL input when using this adapter. The whole point of the adapter is to go from MHL (the Note 3 output) to HDMI (the TV input). If you have an MHL input on your TV or receiver all you need is a cable (basically what's in the white box is built into your TV already).
I second the opinion that you got a knock-off. I have both adapters from Samsung and neither of them need external power to operate with a Note 3.
The only restriction with the MHL 2.0 adapter is that it requires that you plug it into a TV and not a receiver, and it will tell you in no uncertain terms if you don't plug it in correctly.
The only reason to plug in power is that it stops your battery draining so fast, the charger provides about 700mA charging current to the N3.
babyshanks said:
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
Click to expand...
Click to collapse
Could you post a link to the seller you got yours from, or PM me with the info if XDA doesn't allow that? I'd like to get one myself, and like that you have already tried and had good results with yours.
toddnbrown said:
Could you post a link to the seller you got yours from, or PM me with the info if XDA doesn't allow that? I'd like to get one myself, and like that you have already tried and had good results with yours.
Click to expand...
Click to collapse
http://www.samsung.com/us/mobile/cell-phones-accessories/ET-H10FAUWESTA
toddnbrown said:
Could you post a link to the seller you got yours from, or PM me with the info if XDA doesn't allow that? I'd like to get one myself, and like that you have already tried and had good results with yours.
Click to expand...
Click to collapse
Here's the link: http://www.amazon.com/VicTsing-Micr...e=UTF8&qid=1384305065&sr=8-4&keywords=mhl+2.0
Fair warning though; this adapter is not perfect by any means, you can read my review on amazon (the one that tested it out on the note 3). As noted in my review, I am still waiting on a replacement one (since the original one I got functioned but didn't charge when I hooked up my power adapter), and I'll let you guys know if it's better once I receive it. Even though it doesn't function perfectly, for $10 dollars it does the trick.
Edit: They are sending me an extra without having to return the original, so even if the second one doesn't charge, at $5 a pop I'm happy.
babyshanks said:
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
Click to expand...
Click to collapse
Thanks for alerting me to the counterfeit reasoning that shows this part must be a copycat, I contacted the supplier of this part to us for a partial refund as I will use this as a backup and try and buy an original and prices drop from the £39 or take advice of the other replies in this thread and find a genuine 2.0 MHL non-Samsung version. I'll report back if I have any trouble with the supplier claiming that it is a genuine part and see how far eBay support me.
babyshanks said:
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
Click to expand...
Click to collapse
CraigAmey said:
You definitely do not need an MHL input when using this adapter. The whole point of the adapter is to go from MHL (the Note 3 output) to HDMI (the TV input). If you have an MHL input on your TV or receiver all you need is a cable (basically what's in the white box is built into your TV already).
I second the opinion that you got a knock-off. I have both adapters from Samsung and neither of them need external power to operate with a Note 3.
The only restriction with the MHL 2.0 adapter is that it requires that you plug it into a TV and not a receiver, and it will tell you in no uncertain terms if you don't plug it in correctly.
The only reason to plug in power is that it stops your battery draining so fast, the charger provides about 700mA charging current to the N3.
Click to expand...
Click to collapse
Thanks babyshanks and CraigAmey for clarifying and also confirming that I don't need it new TV to take advantage of MHL 2.0's not requirement for external USB power. As I said in my previous reply and with this information and going back to the supplier on eBay to us for a partial refund as I will keep this version of the adapter until prices come down from the genuine parts for fine art genuine MHL 2.0 adapter non-Samsung version.
CraigAmey said:
You definitely do not need an MHL input when using this adapter. The whole point of the adapter is to go from MHL (the Note 3 output) to HDMI (the TV input). If you have an MHL input on your TV or receiver all you need is a cable (basically what's in the white box is built into your TV already).
I second the opinion that you got a knock-off. I have both adapters from Samsung and neither of them need external power to operate with a Note 3.
The only restriction with the MHL 2.0 adapter is that it requires that you plug it into a TV and not a receiver, and it will tell you in no uncertain terms if you don't plug it in correctly.
The only reason to plug in power is that it stops your battery draining so fast, the charger provides about 700mA charging current to the N3.
Click to expand...
Click to collapse
I've read that you need to plug into a TV but haven't had problems. But I am using a samsung mhl 1.0 with 11pin adapter. Didn't need power also. Waiting for Samsung to get on the ball so I can buy a genuine mhl 2 from them.
sent from my sm-9005.
I bought the Samsung one before it went out of stock and it works in any HDMI input also without the need to plug it to the power outlet, but I'm sure a full HD movie will drain the battery fast..
Sent from my SM-N900T using Tapatalk
I think for the price of the official one your better off just getting a wireless dongle, unless you plan to game with it.
Hi guys, here's the response from the eBay seller, "These items were purchased From Kondor Ltd who are one of the major UK Distributors of Samsung Accessories. I would be extremely surprised if they sold fake stock and risked losing there multi-million contract with Samsung over some cheap fake stock. I can only assume the item received has a manufacturing fault of some sort as this is the first problem we have encountered for this product sorry.", so as you can imagine I'm beginning to think there my be a fault with my phone if this message is to be believed, what do you guys think?
Sent from my SM-N9005 using Tapatalk
@rbiter said:
I've read that you need to plug into a TV but haven't had problems. But I am using a samsung mhl 1.0 with 11pin adapter. Didn't need power also. Waiting for Samsung to get on the ball so I can buy a genuine mhl 2 from them.
sent from my sm-9005.
Click to expand...
Click to collapse
The MHL 1.0 adapter doesn't care what it's plugged into, only the MHL 2.0 adapter has that issue.
I just bought a mhl cable through amazon. It has the USB connector for the phone on one side, and a HDMI connector on the other. Directly attached to the HDMI connector is a regular USB plug which I plugged into my power source for my phone (as this is how I understood it should work).
I don't get any messages on my phone that indicate that it is connected to my TV/Monitor and my phone also doesn't indicate that it's charging.
What I read from the product description was, that connecting this cable to my power source would also charge the phone. So could it be my phone is charging, even if the battery indicator doesn't say so? Like it would be charging just so much as that my phone doesn't drain? Or should it clearly indicate that the battery gets charged. Befor knowing this, I'm hestitant to send the cable back as defective.
Can any one advise?
Thanks
Mikegrmn said:
I just bought a mhl cable through amazon. It has the USB connector for the phone on one side, and a HDMI connector on the other. Directly attached to the HDMI connector is a regular USB plug which I plugged into my power source for my phone (as this is how I understood it should work).
I don't get any messages on my phone that indicate that it is connected to my TV/Monitor and my phone also doesn't indicate that it's charging.
What I read from the product description was, that connecting this cable to my power source would also charge the phone. So could it be my phone is charging, even if the battery indicator doesn't say so? Like it would be charging just so much as that my phone doesn't drain? Or should it clearly indicate that the battery gets charged. Befor knowing this, I'm hestitant to send the cable back as defective.
Can any one advise?
Thanks
Click to expand...
Click to collapse
The phone should indicate it is charging as it normally would.
NZtechfreak said:
The phone should indicate it is charging as it normally would.
Click to expand...
Click to collapse
Thanks. I really appreciate your straight answer
I'll be sending the cable back. I wouldn't bother too much if it wouldn't supply the full resolution and such, but I'd at least would expect some output on my TV.
Mikegrmn said:
Thanks. I really appreciate your straight answer
I'll be sending the cable back. I wouldn't bother too much if it wouldn't supply the full resolution and such, but I'd at least would expect some output on my TV.
Click to expand...
Click to collapse
You're welcome.
I love using MHL, but I really wish there weren't several varieties of MHL cables (5-pin, 11-pin, 1.0 and 2.0) and also such a large number of fakes and very low quality ones out there. Makes buying difficult, as all these threads about MHL demonstrate.
Does anyone know if you can physical see whether you have a 5 pin or 11 pin MHL 2.0?
Sent from my SM-N9005 using Tapatalk
Can the USB otg and HDMI be used at the same time?
My situation now is that I have the Moga Pro Power that I picked up at the pawn shop for $40
Noticed that it has quite a bit of lag using the A-mode, and still a noticeable amount of lag in B-mode, approximately 100ms.
So I'm wondering if it's possible to connect a wired controller via USB otg, and if that might have less input lag.
I'm also curious if I can output to HDMI while connected to a wired USB controller.
If I could create like a docking station on my TV that turns my phone into a mean little media station/console, that would be completely badass.
I saw this adapter on Amazon and eBay, it connects to the phone's microusb on one end, and has ports for HDMI, SD, Micro-SD, USB, and a Micro-usb for powering the phone and any attached USB device at the same time. You can find it by searching "otg slimport" on Amazon or eBay.. Selling for under $13 on eBay. Unfortunately, the same product on Amazon has only a 2 star rating. Reviews saying the charging port isn't working as advertised, and HDMI connection is touchy, and certain TVs are incompatible. So it looks like a no-go. China will manufacture and sell just about any hodgepodge of wires and plastic they think consumers will buy, that doesn't mean it will work.
So now I'm wondering if this sort of function is even possible, and if so, is there a product available that can provide it, and if there is no product like that, can somebody please make it?
So I did a bit of research, and it seems there's definitely some technical limitations as far as charging the phone wile in "host" mode. This means that while connected to USB OTG, the circuitry that is normally used to charge the phone, is used to supply power to the attached USB devices. I found a site that has a modified kernel for the Nexus 7 that enables charging the phone while connected to devices via OTG. https://mehrvarz.github.io/usb-host-mode-power-management-nexus7/
Maybe this could be implemented in the V10