[ROM][v500][AOSP] Android 6.0 Marshmallow - 20161018 - MOB31H - G Pad 8.3 Android Development

AOSP - Android 6.0.1 - MOB31H​
NO LONGER SUPPORTED​
This is a pure build of AOSP Android 6.0 Marshmallow, the goal is to have a pure AOSP rom, so it is not the objective of this project to include any functionality that is not native to Android AOSP.
And to make the experience more consistent and simplify some issues related to Android Marshmallow, this ROM has a basic versions of Google Apps (Gapps) pre-installed, additional apps can be installed via Play Store.
Download:
ROM: http://forum.xda-developers.com/devdb/project/dl/?id=20977
Instructions:
Install TWRP (download here)
Boot into recovery and flash the ROM.
For Root flash SuperSU (download here)
Note: Systemless supersu will not work with our device. The latest official release that will work is 2.52, but any system based version will work.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
AOSP Android 6.0 Marshmallow, ROM for the LG G Pad 8.3
Contributors
adrianom
Source Code: https://github.com/AdrianoMartins/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-10-29
Last Updated 2016-11-17

Changelog
2016-10-18:
Update to Android 6.0.1 Release 70 (MOB31H)
Fix audio output problem in specific apps
2016-09-17:
Update to Android 6.0.1 Release 66 (MOB31E)
Other minor changes in kernel and rom
2016-09-11:
Only a clean build
2016-08-04:
Update to Android 6.0.1 Release 61
2016-07-17:
Fix Skype error
Fix and optimization patchs
Build with new toolchain (optimization)
Fix audio and video bad quality (update adreno and audio blobs) - thanks to @Deltadroid
2016-07-08:
Update to Android 6.0.1 Release 52 (MOB30R)
2016-06-16:
Update Google Apps (fix 2016-06-12 error)
2016-06-12:
Revert 2016-05-05 file system and storage management changes
2016-06-10:
Update to Android 6.0.1_r46
2016-05-07:
Update Gapps and Fix Setup Wizard
2016-05-05:
Update to Android 6.0.1_r43
Internal updates and patches focused in file system and storage management
2016-03-25:
Update to Android 6.0.1_r17
Update kernel with some CAF patchs (should fix the forced unmount of sdcard)
2016-02-07:
Update to Android 6.0.1_r13
Build with a new toolchain (GCC 5.3 and cortex-a15 optimization)
Other minor changes to the kernel, framework and camera
2016-01-08:
Update to Android 6.0.1_r10
2015-12-22:
Fix Play Store apps displaying as incompatible
Fix exFAT mount Support (need test)
Add AOSP Camera and remove Google Camera due to problem in switch to video mode (can be install from Play Store)
2015-12-17:
Update to Android 6.0.1
Fix Camera HDR mode
Add exFAT mount Support (need test)
Other small updates and internal patches
2015-11-18:
Update Gapps and Fix Google Calendar Sync
Update Setup Wizard to Tablet Version
Remove some applications intended solely for phones.
2015-11-15:
Use OpenGapps as Gapps source
Wifi: re-add default country code (BR)
Tweak display gamma configuration
Other small or internal patches
2015-11-12:
Tweak Wifi Settings
Change Kernel Power Management (fix wifi drop on sleep mode and optimize power savings mode)
Other small or internal patches
2015-11-07:
Update/Rollback to Android 6.0.0_r5 (MRA58V): the r26 for now is only intent for Nexus 5x e 6p, and this was having some issue in other devices, including:
Microphone not be detected
High battery consumption
With the change to default release branch (and 6.0.0_r5) this problems was fix.
Update Adreno Driver (fix Antutu error)
Build with a 5.2 (ROM) and 4.9 (Kernel) Toolchain compile by me with A15/FPU optimization
Remove Exchange2 and AOSP Email (default to Gmail and Google Exchange version)
Update Gapps
Other small or internal patches (including sdcard)
2015-11-04:
Update to Android 6.0.0_r26 (MDB08M)
Optminizations
Build with UBER Toolchain 5.2 (ROM) and A15 optimized 4.9 (Kernel)
Enable Strict Aliasing, Krait Tunings, GCC Tunings, Graphite, A15/Neon-vfpv4 Optminizations
Kernel Update:
Enable dynamic wireless regulatory domain
Enable support for features that have been disabled in the first versions (BFQ, SIO, ZEN, INTELLIDEMAND and others)
Enable lcd color temperature calibration
2015-10-31:
Enable Offline Charger
Enable SD Card Adoptable Storage (and fix access problem)
Fix Native Tap To Wake Setting Option
Add Calendar Sync
Enable clear all recents button
Enable SystemUI Tuner
Cleanup duplicate ringtones/alarms
Update the default wallpaper
Show Optimizing app dialog on first boot
Other small or internal patches
2015-10-29:
First release
.

Download History
2016-09-17: http://forum.xda-developers.com/devd...t/dl/?id=20460
2016-09-11: http://forum.xda-developers.com/devdb/project/dl/?id=20358
2016-08-04: http://forum.xda-developers.com/devdb/project/dl/?id=19659
2016-07-17: http://forum.xda-developers.com/devdb/project/dl/?id=19369
2016-07-08: http://forum.xda-developers.com/devdb/project/dl/?id=19247
2016-06-16: http://forum.xda-developers.com/devdb/project/dl/?id=18909
2016-06-12: http://forum.xda-developers.com/devdb/project/dl/?id=18864
2016-06-10: http://forum.xda-developers.com/devdb/project/dl/?id=18842
2016-05-07: http://forum.xda-developers.com/devdb/project/dl/?id=18267
2016-05-05: http://forum.xda-developers.com/devdb/project/dl/?id=18239
2016-03-25: http://forum.xda-developers.com/devdb/project/dl/?id=17547
2016-02-07: http://forum.xda-developers.com/devdb/project/dl/?id=16689
2016-01-08: http://forum.xda-developers.com/devdb/project/dl/?id=16132
2015-12-22: http://forum.xda-developers.com/devdb/project/dl/?id=15825
2015-12-17: http://forum.xda-developers.com/devdb/project/dl/?id=15735
2015-11-18: http://forum.xda-developers.com/devdb/project/dl/?id=15277
2015-11-15: http://forum.xda-developers.com/devdb/project/dl/?id=15239
2015-11-12: https://www.androidfilehost.com/?fid=24269982086994042
2015-11-07: http://forum.xda-developers.com/devdb/project/dl/?id=15067&task=get
2015-11-04: https://www.androidfilehost.com/?fid=24269982086987956
2015-10-31: https://www.androidfilehost.com/?fid=24052804347851183
2015-10-29: https://www.androidfilehost.com/?fid=24052804347848935
.

To build from source:
Code:
repo init -u https://github.com/AdrianoMartins/aosp_manifest.git -b android-X (replace with desired version)
repo sync
. build/envsetup.sh
lunch aosp_v500-userdebug
make -j4 otapackage
Credits:
The kernel is base on @ckret, @Rick Roll and @fefifofum kernel source, with additional patches from all community.
The device repo is based on the @fefifofum source for CM with my changes to AOSP and Marshmallow.
.

...

great, Im gona try it, keep up the great work man, hats off !

Oh my days!!!!!!!!!!!gonna flash it and give feed back. Thank you

@adrianom
Thank you for MM sweetness for our G Pad. Downloading now. Will report back for any issues.

Does wifi have issues like on cm11/12 when download speed is not higher 50mbps

Okay i got a random RESTART during the first charge cycle of this rom.... Still a lot to test tho

takis said:
Okay i got a random RESTART during the first charge cycle of this rom.... Still a lot to test tho
Click to expand...
Click to collapse
In offline charge (powered off)? If so, it was not yet implemented and reboot to os is the standard.

It was while the device was on

So, what I just did:
- Full backup of apps with TB
- Download MM version and SuperSu 2.52
- Reboot into Recovery
- Wipe everything but data partition
- Install ROM
- Install SuperSu
- Reboot
- Restore all apps with TB
Wifi working, camera working, flawless victory so far !
regards, mistersixt

mistersixt said:
So, what I just did:
- Full backup of apps with TB
- Download MM version and SuperSu 2.52
- Reboot into Recovery
- Wipe everything but data partition
- Install ROM
- Install SuperSu
- Reboot
- Restore all apps with TB
Wifi working, camera working, flawless victory so far !
regards, mistersixt
Click to expand...
Click to collapse
Couldn't restore app with TB, had to it manually. Fortunately don't have a lot of apps.

One issue I have found is that apps are unable to detect my sd card but in MMs Settings sd card shows all fine and can even be able to browse.
I'm using sandisk class 10 64gb card. It was running all fine in previous 5.1.1 Aosp rom.

adrianom said:
In offline charge (powered off)? If so, it was not yet implemented and reboot to os is the standard.
Click to expand...
Click to collapse
i also exercised the device on reboots on your last lollipop rom.
20-80% everything is fine, then 80-95 ~7 reboots, I lately use twrp to charge.
so maybe not an MM specific issue.
i will flash MM tomorrow, if it happens again i will send a log

I have also tested most of the basic tablet functions if not all and they seem to work.... I have a feeling that only charge/reboot/storage problems will have to be fixed ....

Darkmasterhk said:
i also exercised the device on reboots on your last lollipop rom.
20-80% everything is fine, then 80-95 ~7 reboots, I lately use twrp to charge.
so maybe not an MM specific issue.
i will flash MM tomorrow, if it happens again i will send a log
Click to expand...
Click to collapse
This information is very important, this indicate that maybe is a heat alarm when the device reach this level.
One question, you are using the standard charger?
Test the Marshmallow version and if it occurs, report with a log, I'll check this.

adrianom said:
This information is very important, this indicate that maybe is a heat alarm when the device reach this level.
One question, you are using the standard charger?
Test the Marshmallow version and if it occurs, report with a log, I'll check this.
Click to expand...
Click to collapse
yes/no its the v3 edition shipped with my g4 but basically the same. (same power)
will try it with stock one tomorrow.

rshahzad17 said:
One issue I have found is that apps are unable to detect my sd card but in MMs Settings sd card shows all fine and can even be able to browse.
I'm using sandisk class 10 64gb card. It was running all fine in previous 5.1.1 Aosp rom.
Click to expand...
Click to collapse
Same here. Apps can't detect SD card.. But able to see and browse through settings. I have Sandisk 32GB Class 10 card.
Not a deal breaker to me.

Related

[ROM][v500][AOSP][5.1.1] Android 5.1.1 Lollipop - 20151012 - LMY48W (CLOSED)

AOSP - Android 5.1.1 - LMY48W​
This is a build of pure AOSP Android 5.1.x Lollipop, the goal is to have a pure AOSP rom, so it is not the objective of this project to include any functionality that is not native to Android AOSP.
THIS PROJECT WILL NOT HAVE MORE UPDATED​
Download:
ROM: https://www.androidfilehost.com/?fid=24052804347836083
Gapps: http://opengapps.org
Instructions:
Install TWRP (http://forum.xda-developers.com/lg-g-pad-83/orig-development/recovery-official-twrp-t3135886)
Boot into recovery and flash the zip of ROM and Gapps.
For Root flash SuperSU (http://forum.xda-developers.com/showthread.php?t=1538053)
Source:
https://github.com/AdrianoMartins/aosp_manifest
To build from source:
Code:
repo init -u https://github.com/AdrianoMartins/aosp_manifest.git -b android-5.1
repo sync
. build/envsetup.sh
lunch aosp_v500-userdebug
make -j4 otapackage
Credits:
The kernel is base on @ckret, @Rick Roll, @franciscofranco and @fefifofum kernel source.
The device repo for the newer version is based on the @fefifofum source.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
AOSP Android 5.1 Lollipop, ROM for the LG G Pad 8.3
Contributors
adrianom
Source Code: https://github.com/AdrianoMartins/
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-11-15
Last Updated 2016-02-07
Changelog:
20151012
Update to 5.1.1_r24 (LMY48W)
Several bug fix patches (see github)
Replace some AOSP apps:
Music by Eleven
MusiFX by AudioFX
Update some AOSP apps:
Browser
Launcher
20150823
Performance Improvement
New Kernel (see github)
Fix some problems
Update to 5.1.1_r10 (LMY48J)
20150719
Performance Improvement
New Kernel (see github)
Fix some problems
Update to 5.1.1_r8 (LVY48C)
20150628
Performance Improvement
20150627
Rebase the system based on @fefifofum repo device
Update blobs, kernel and other packages with many patchs (see github)
Update to 5.1.1_r5 (LYZ28E)
20150614
New Kernel (a merge of LG, @fefifofum, @Rick Roll and a my work, it is based on the Stock Lollipop kernel)
Update some blobs from Stock Lollipop
Update Wifi and Bluetooth configuration and firmware
Add OV5693 Camera Sensor Support (I don't tested this, I need someone to test and report)
Other changes to make use of the new kernel and for optimization
20150604
Build with personal toolchain (Basic the Google Toolchain with Cortex-a15 and others optimization flags)
Small patches to Framework (bugfix)
Boot image Bumped
Update to 5.1.1_r4 (LMY48B)
Enable Strict Aliasing, Mthumb-interwork and Graphite optimization flags
20150422
Update to 5.1.1_r4 (LMY47V)
20150419
Some minor memory leaks fixes
New Kernel:
Revert some changes made in 20150314 version
Build with 4.9 A15 Toolchain
Add graphite and cortex-a15 optimization
20150415
Update to 5.1.0_r5 (LMY47O)
Update Adreno Libs (from Mako 5.1)
20150327
Update to 5.1.0_r3
20150314
General Performance Improvement
New Kernel (performance e memory manager improvements)
Update Adreno Libs
20150311
Update to 5.1 version (LMY47D)
Rebuild with google toolchain (more stable)
20150106
New Kernel - Fix Gamma Calibration
20150104
Wifi Update (fix connection and speed problem)
New Kernel (rebuild with new toolchain and update gpu driver)
Updated adreno blobs (from mako lrx22c)
Optimization
20150101
Build with Sabermod Toolchain (4.8.5 with cortex-a15 optimization)
Build with 03 and some optimization flags specific for cortex-a15
Apply patchs from master repo to fix memory leaks
Tweaks to WiFi and Network config
20141227
Fix GPS
Fix bluetooth on secondary user
Enable silent and airplane mode in power button options
Optimization and small fixes
20141221
Update to 5.0.2 (LRX22G)
Optimization
20141205
Update to 5.0.1
Add off mode charger (now charge when the device is off)
Fix sensor instability (rotation)
Fix clock reset at reboot
Enable init.d scripts
Enable knock-on (thanks to @forfivo for the tip)
Fix Google Account Backup/Restore
20141123
Location fix (only with google service)
Update Adreno drivers
Several internal changes to fix and optimization
20141119
Update to Android_5.0_r7
Fix media playback (Youtube and other)
Enable Multiuser Support
Remove MPDecision & Thermald (test to fix random reboot)
Change installation to work with all recovery
20141116
Update to Android_5.0_r6
Fix Wifi, Bluetooth, Internal Storage, Sensors and other
20141115
First release
Old Versions:
2015-08-23: https://www.androidfilehost.com/?fid=24052804347800184
2015-07-19: https://www.androidfilehost.com/?fid=24052804347777166
2015-06-28: https://www.androidfilehost.com/?fid=24052804347766452
2015-06-27: https://www.androidfilehost.com/?fid=24052804347765783
2015-06-14: https://www.androidfilehost.com/?fid=24052804347759924
2015-06-04: https://www.androidfilehost.com/?fid=24052804347756835
2015-04-22: https://www.androidfilehost.com/?fid=96042739161891521
2015-04-19: https://www.androidfilehost.com/?fid=96039337900114132
2015-04-15: https://www.androidfilehost.com/?fid=95916177934542265
2015-03-27: https://www.androidfilehost.com/?fid=95916177934547199
2015-03-14: https://www.androidfilehost.com/?fid=95916177934541801
2015-03-11: https://www.androidfilehost.com/?fid=95916177934540292
2015-01-06: http://d-h.st/5DAl
2015-01-04: http://d-h.st/IUW
2015-01-01: http://d-h.st/rch
2014-12-27: http://www.mediafire.com/download/33f4u3cw3s2ic8g/aosp_v500-ota-eng.adrianomartins_20141227.zip - (mirror)
2014-12-21: http://www.mediafire.com/download/ucbt5fc5qh74dqn/aosp_v500-ota-eng.adrianomartins_20141221.zip
2014-12-05: http://www.mediafire.com/download/9bp40glnlnapmo2/aosp_v500-ota-eng.adrianomartins_20141205.zip
-
That is great news. I can't really help you, and I can't even flash it 'cause I use my Gpad daily as a productivity device, but I'm definitely rooting for you !
Great work! What kernel are you using as a base?
Edit: btw your zip doesn't work.
Thanks very much for your effort. Looking forward to a full working function rom
Some help
I want to help, what i must to do?
Great News, thanks ?
Pretty awsome! I Will test this and edit on how it goes later
Looking at the nonworking wifi and internal storage is top priority for me.
Edit1: Looks pretty cool Its a chance to preview of the UI and under the hood stuff. Pretty much none of the apps work though except calculator and the browser and a few other stuff
Edit2: When I go to TWRP recovery to flash back my backup it runs openrecoveryscript and reboots. I cant get into TWRP itself. Any suggestions on what to do here?
Bronando said:
Pretty awsome! I Will test this and edit on how it goes later
Looking at the nonworking wifi and internal storage is top priority for me.
Edit1: Looks pretty cool Its a chance to preview of the UI and under the hood stuff. Pretty much none of the apps work though except calculator and the browser and a few other stuff
Edit2: When I go to TWRP recovery to flash back my backup it runs openrecoveryscript and reboots. I cant get into TWRP itself. Any suggestions on what to do here?
Click to expand...
Click to collapse
You are using the 2.7 version of TWRP, right? Try send a "adb reboot recovery" from pc in the moment that recovery start, this restart the recovery and go back to normal recovery.
I recommend use TWRP 2.8.
Is this only for gpe?
Sent from my LG-V500 using XDA Premium 4 mobile app
This is for v500.
Looking Forward For Full Fix!
Wow I thought there would be more support for this rom. Sorry I'm one of the useless ones that can offer no help. Hope the cavalry arrive soon
Sent from my Nexus 4 using XDA Free mobile app
When Google releases code this next week or so, then this project will get a huge bump. Great start so far though. I can feel the enthusiasm.
adrianom said:
Not working:
Wifi, Bluetooth, GPS, Internal Storage, Sensors and other
Click to expand...
Click to collapse
wifi etc. are propably due to new sepolicy
look into the sources of mako and other devices
maybe you can figure it out
https://android.googlesource.com/device/lge/mako/+/android-5.0.0_r6
https://android.googlesource.com/device/lge/mako/+/3370c7953eb2d1559f5c66a2f6010573d7fe9b9a
they put everything into "sepolicy"
bluetooth, wifi, storage. etc.
you have to fix it up for the awifi
ckret said:
wifi etc. are propably due to new sepolicy
look into the sources of mako and other devices
maybe you can figure it out
https://android.googlesource.com/device/lge/mako/+/android-5.0.0_r6
https://android.googlesource.com/device/lge/mako/+/3370c7953eb2d1559f5c66a2f6010573d7fe9b9a
they put everything into "sepolicy"
bluetooth, wifi, storage. etc.
you have to fix it up for the awifi
Click to expand...
Click to collapse
CM Team is working on an universal sepolicy for all qcom devices. For now you need to set selinux as permissive.
https://github.com/victormlourenco/...mmit/5a20f7d373d61672a4ab3bbe7a9111fb3cbe651f
Rick Roll said:
CM Team is working on an universal sepolicy for all qcom devices. For now you need to set selinux as permissive.
https://github.com/victormlourenco/...mmit/5a20f7d373d61672a4ab3bbe7a9111fb3cbe651f
Click to expand...
Click to collapse
ckret said:
wifi etc. are propably due to new sepolicy
look into the sources of mako and other devices
maybe you can figure it out
https://android.googlesource.com/device/lge/mako/+/android-5.0.0_r6
https://android.googlesource.com/device/lge/mako/+/3370c7953eb2d1559f5c66a2f6010573d7fe9b9a
they put everything into "sepolicy"
bluetooth, wifi, storage. etc.
you have to fix it up for the awifi
Click to expand...
Click to collapse
Yes, I am upload a version with some changes to sepolicy and boot set to permissive, I get almost all working.
New Version:
Download: http://www.mediafire.com/download/25u8mp2ixstk6lr/aosp_v500-ota-eng.adrianomartins_20141116.zip
Changelog - 20141116:
Update to Android_5.0_r6
Fix Wifi, Bluetooth, GPS, Internal Storage, Sensors and other
Great initiative, can't wait for lollipop to become "stable" on the g pad!

[EOL][ROM][6.0.1] Unofficial CyanogenMod 13.0 for N7105

[ROM][6.0.1] Unofficial CyanogenMod 13 N7105
NOTICE: Support for this ROM has ended, as I can no longer work on this. Take a look at the other Marshmallow ROMs out there.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working
Graphics
RIL
Wifi
Bluetooth
Sensors
Vibration
Camera
Video Playback
NFC
Audio
Doze
GPS
Ambient Display
Not working/Unknown
Camera occasionally stops working. Reboot to fix or download mediaserver killer and run it.
Data occasionally doesn't work after reboot. Turn airplane mode on and off.
Download
Latest build: 11.03.2016
Older builds: Archive
Gapps: Open Gapps
Installation
Read the FAQ to familiarize yourself with any issues that may come up
Make sure you're using the latest TWRP version (3.0.0)
Download the latest build
If using F2FS, read the F2FS section first
Factory reset in TWRP (Very important! Do not skip)
Flash CM13
Flash Gapps
Reboot
Take a look at the post-install steps. They could fix some errors
For updates, it's OK to dirty flash. If you experience any issues however, it is recommended that you clean flash.
Post-install
Make sure YouTube is really working by playing a video
Enable development settings and enable ADB
If you flashed the Stock gapps package, download this and extract it to /system/app
F2FS
F2FS has been enabled. However, you should not use it unless you know what you are doing. I am not responsible for any data loss or damage that occurs. That being said, it should be OK to use.
YOUR EXISTING DATA WILL BE LOST IF FOLLOWING THESE INSTRUCTIONS. BACK IT UP!
Download this for /data and this for /cache
Flash them in TWRP
Reboot to recovery
Follow the rest of the ROM flashing instructions
Changelog
Changelog: -- 11.03.2016
Synced with CM
Back to my custom repos
Experimental incoming calls fix
Doze reenabled
Accelerometer sensor update
New implementation of Ambient Display: You can now wave your hand to A) show notifications or B) turn on the screen to unlock
Latest kernel updates
Changelog: -- 04.03.2016
Synced with CM
Using upstream smdk4412-common and t0lte repo
Latest kernel updates (supposedly fixes the rotation issues)
Changelog: -- 28.02.2016
Synced with CM
SELinux back to permissive (still causing issues in enforcing)
Changelog: -- 16.02.2016
Synced with CM
F2FS support enabled
Changelog: -- 15.02.2016
Moved Snap building to smdk4412-common
Allow flashlight to have wakelock
Downclock more aggressively (better battery life)
Fix Wifi disconnecting when sleeping
Base for F2FS
Changelog: -- 13.02.2016
Experimental Bluetooth patch
Additional SELinux fixes
Changelog: -- 11.02.2016
Synced with CM
SELinux back to permissive (No more bootloops)
Active Display enabled
Additional Doze stuff
Changelog: -- 08.02.2016
Synced with CM
Removed CM12 chroot hack
Switched to CM's method (with a few minor changes)
SELinux is now enforcing
Changelog: -- 05.02.2016
Synced with CM
Latest security release
Applied latest upstream kernel and system/core changes
Changelog: -- 28.01.2016
Synced with CM
Experimental patch for in call volume
Changelog: -- 25.01.2016
Synced with CM
Switch to BFQ
Boot with noop for faster boot
Changelog: -- 24.01.2016
Synced with CM
Switch to Samsung HAL
Add Snap overlay
Changelog: -- 23.01.2016
Synced with CM
Enabled Doze
Changelog: -- 22.01.2016
Synced with CM
Set SELinux to permissive on stock kernel (should fix the bootloop issues)
Update SELinux policies
Apply additional Netflix patch
Allow ADB on stock kernel
Cleaned up radio access families
Changelog: -- 21.01.2016
Synced with CM (fixes the missing QS tiles)
Fix broken camera
Fix YouTube
Changelog: -- 20.01.2016
Synced with CM
Remove camera2
Test fix for Youtube
Fixed kernel
Changelog: -- 19.01.2016
Synced with CM
Added test code to see if it can stop RIL from crashing
Thanks To/Credits
* CyanogenMod team
* p-an (For the original i9305 RIL code)
* ivan_meler (YouTube and Netflix patches)
XDA:DevDB Information
CyanogenMod 13.0 for N7105, ROM for the Samsung Galaxy Note II
Contributors
PoisonNinja
Source Code: https://github.com/PoisonNinja
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-11
Created 2016-01-20
Last Updated 2016-03-23
Reserved
FAQ:
Root
Enable Developer settings and enable root. You can also flash SuperSU (Beta version) in TWRP, but you'll have to flash it every time you upgrade.
Now on Tap
By default, press and hold the Menu button for Now on Tap. To change it, open Buttons in settings and change the action for the button you want to "Search Assistant"
Wifi Issues
Go to developer settings and turn on "Use Legacy DHCP Client". No longer needed
Reserved
Reporting Bugs
When reporting an issue, please provide the following information:
Device (N7105, i317, 889, etc.)
Build Date (Keep in mind the one in About may not be accurate)
Kernel Build Date
Logcat when the issue occur (http://forum.xda-developers.com/showthread.php?t=1726238)
If it's a random reboot, also provide the following information:
Kernel logs. Run "adb shell su -c cat /proc/last_kmsg > /sdcard/Download/kernel.txt" and grab kernel.txt from the Download folder on your phone
Building CyanogenMod
Follow the instructions https://wiki.cyanogenmod.org/w/Build_for_t0lte until the "Get Prebuilt Apps"
Skip that step and do the next one
Edit roomservice.xml in .repo/local_manifests/ and remove the lines with android_device_samsung_smdk4412-common, android_device_samsung_t0lte, and android_kernel_samsung_smdk4412. It should look like this.
Edit blobs.xml in .repo/local_manifests (create it if it doesn't exist). Edit it so it looks like this.
repo sync --force-sync
Delete any folders if you need to in order to resolve sync errors
Turn on caching
source build/envsetup.sh
brunch t0lte
New build is up.
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
xxjabberwockxx said:
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
Click to expand...
Click to collapse
No problem. Remember that Camera won't work. I'll fix it later tonight. Videos also won't work, so if a video tries to play, it will freeze. Just exit the app, and you'll be fine.
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
xxjabberwockxx said:
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
Click to expand...
Click to collapse
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
PoisonNinja said:
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
Click to expand...
Click to collapse
oh i was talking about the auto restore google play does... maybe its just the transition from L to M.
New Build
New build is up.
Changes:
Fixed missing QS tiles (CM issue)
Fixed broken camera
Fixed video playback (Not Netflix though)
Synced with latest CM sources
If you want video to work, you MUST factory reset and flash again. Sorry about that.
Also, I'm looking for people to test Netflix for me. I suspect I may need more patches, but I don't have a Netflix account to test.
Downloading and testing. 20160121 right?
gathithow said:
Downloading and testing. 20160121 right?
Click to expand...
Click to collapse
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
PoisonNinja said:
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
Click to expand...
Click to collapse
Is necessary flash the boot.img?
gathithow said:
Is necessary flash the boot.img?
Click to expand...
Click to collapse
No. Do not flash the boot.img, as it is from a old build. Link is removed from the main post.
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
diogocpr said:
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
Click to expand...
Click to collapse
No problem.
PS: Agni is confirmed working with the latest build. It doesn't break anything.
I'm unable to boot on the latest build on a i317. I just get a bootloop.
jooprzol said:
I'm unable to boot on the latest build on a i317. I just get a bootloop.
Click to expand...
Click to collapse
Have you clean flashed? Try flashing Agni kernel.
PoisonNinja said:
Have you clean flashed? Try flashing Agni kernel.
Click to expand...
Click to collapse
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
jooprzol said:
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
Click to expand...
Click to collapse
Interesting. That should have been fixed with the latest build. Let me know if there's anything else wrong.

[ROM][6.0.1][AOSP][OPTIMIZED] UltimateROM [Stable][FINAL #2][21.08.2018]

The Prehistory of UltimateROM
About a month ago I decided to set out to improve the performance of my phone with a more optimized build. I had already begun building OmniROM 5.1.1 with a some set of optimizations based on the work of OptiPop Team, and shortly after some the major issues on Marshmallow on our devices were resolved, this idea to create an ultimatively optimized AOSP-based ROM has born.
Why Should You Use UltimateROM? What makes it different?!
Honestly, I don't necessarily care, how many users or downloads my ROM has. Most importantly, and what I do care about is people liking and enjoying their phone; if you try UltimateROM and you like it, great! I'm glad you enjoy it. If you don't, maybe leave some feedback on how I can improve it, and go try something else in the meantime. If you'd like to know, what I've done that makes this ROM unique, here is a list:
Highly optimized. similar to Linaro(and in many ways, better than), build, resulting in a smoother Android
Compeletely developed in the open, everything I do is right on my GitHub for anybody to use and improve upon.
A unique kernel which attempts to balance features, stability, and of course, performance
Almost the sources, excluding apps, the SystemUI and some more, are based on CyanogenMod ones, which means there are more fixes and support for our legacy devices (even though CyanogenMod itself doesn't really support any devices like our, anyway google doesn't even do that minimal support as CM Team does)
Disabled SELinux. Looking backward on how many issues SELinux was causing and still causing for people that use it on MM, it seems to me a ridiculuos how google promotes and implements it everywhere, without any proof of improving anything rather than making worse.
Current Information
Everything I do with UltimateROM I always test personally on my phone, but anyway...
Code:
#include <disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modifications, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Please also note that currently I don't test installation with the Gapps. So far installation is only tested as dualboot ROM - though, the uploaded build is an usual one, - please let me know if the uploaded build has issues with booting, even though normally this should not happen.
What's working:
RIL (phone/SMS/3G)
Video (playback & recording)
Audio (playback & recording)
Wi-fi
Bluetooth
Camera (Front and rear)
2D/3D HW Acceleration
USB, MTP, ADB
all native tethers (Wifi/BT/USB)
external storage
What's not
Formatting SDcard as adoptable storage will screw it up (don't format / encrypt)
MTP bug with doubled folders in sdcard root folder
ROM features:
Dark Marshmallow Theme
long volume press to skip track
PA Pie control
SlimRecents / improved AOSP recents
Re-added task manager
Navigation Bar
System UI tuner
expanded desktop
storages are swapped by default
extended reboot menu
customizable button backlight settings
Viper4Android FX
superuser embedded
Download
UltimateROM
Installation
Before installation, make sure that you have enough free space on partition /system. AT LEAST 540 Mb is required for this build if installing WITHOUT any Gapps. If you don't have enough space, follow repartition manual. (at your own responsibility for any kind of possible damage. Be sure to measure twice and cut once!). There is a CWM ReParted zip that was tested by @Culateralligator.
wipe cache
make sure you're using TWRP 2.8.6.0. All the below is only tested on this recovery. Philz is not supported by this ROM and not planned to in the near future. Note that TWRP from the linked topic requires preinstalled chrono kernel.
install ROM first
install latest chrono kernel
install gapps (optional), if you do so, make sure you are not running of space on /system ( about GApps )
Sources:
https://github.com/UltimateROM/android_manifest
Thank Yous
SergeyL - many-many thanks for an initial set of patches, device tree and TWRP 3.0.0.0! Also thanks for helping me implementing some features to this ROM.
JDCTeam, BenzoROM - thanks for great cherry-picks!
MWisBest - this project was heavily inspired by his FML (Fork My Life) ROM
OptiPop - an initial set of optimizations that the currently used by me is based upon
@Meticulus - thanks for his great contributions on our devices!
@AGONTUK - thanks for an initial Marshmallow bring up!
@nieltg - Sources for Galaxy Ace 2 device
@golden-guy - thanks for great cherry-picks !
@TeamCanjica - vendor and hardware sources
@Unjustified Dev - Audio fixes
Google
CyanogenMod
AOKP
SlimROMs
EuphoriaOS
OmniROM
AOSPA
Viper4AndRroid Team
And many other devs, I could forget (please write me if I did so).
Special Thanks
@shaqman89 - for providing the build server
@S.AMU - for providing FTP server
XDA:DevDB Information
UltimateROM, ROM for the Samsung Galaxy Ace II
Contributors
ChronoMonochrome, SergeyL, JDCTeam, OptiPop Team, BenzoROM, OmniROM, AOKP, CyanogenMod, SlimRoms, AOSPA, Temasek.
Source Code: https://github.com/UltimateROM
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 4.1.2 ROM or up + kitkat-compatible recovery
Based On: AOSP, CyanogenMod
Version Information
Status: Stable
Created 2016-03-20
Last Updated 2018-08-20
Changelogs
Changelog
20.08.2018 - build #13
sources update
switch to opensource sensors
switch more device libs to open source base
unified codina / janice build
02.12.2017 - build #12
fixed native moving apps to SDcard
APP2SD and similar apps now should work correctly *
fixed second incoming call not to crash rild (not tested, needs confirmation), thanks to @SergeyL
small RIL fixes
NOTE: installation method was updated. Flash latest chrono kernel build after this ROM install.
02.04.2017 - build #11
kernel updated to r5.0
sdcard mount fixes
integrated an unofficial build of the Xposed framework
ported the utility mtools *
* for repairing the broken sdcard label you can move the file /system/bin/mtools to /system/xbin folder, then type in the terminal emulator mlabel/i]. It will show the current sdcard label and will prompt to type the new one.
27.02.2017 - build #10
updated sources to 6.0.1_r78
added an initial support of the PowerHAL *
ported some changes from Resurrection Remix 7.1.1 build (thanks to SergeyL for patches)
updated kernel to r5.x.x (mostly updates from google android-3.4 kernel)
changed recovery to TWRP 3.x.x
unstable MySQL optimizations are reverted
changed buttons backlight mode - backlight is only enabled when buttons are pressed
experimental change scheduling policy of the surfaceflinger to FIFO
maybe, something yet
* at the moment there's no support of changing the PowerHAL profiles from the Settings, however, you can change profile in a file /system/etc/init.d/999powerhal
Proceed installation of this build only with data wipe.
20.09.2016 - build #9
Fully switched to an opensource RIL! Many thanks to Meticulus for finding the working RIL sources and fixing it, also I'd like to thank millosr and mickybart from Nozomi (Xperia S) forum for fixing the crash when performing a call and providing patches for debugging the proprietary libril!
More libs now are built from source - credit goes to Meticulus
Added sdcardfs support (requires at least build r4.8 of Chrono Kernel)
Added home key press to accept the incoming call and power key press to end the active call features from CyanogenMod - thanks to SergeyL for helping with finding those patches
Changed LowMemoryKiller tunables to the more aggressive + increased zram size to 400Mb - multitasking should be (hopefully) better
Changed Dynamic governor tunables to be more aggressive
Various minor fixes that improves the stability of ROM
We've also finally got rid of all shim (i.e. interposed) libraries that were needed in order for some features (camera, GPS etc) to work
30.05.2016 - build #8
updated wifi autoconnection fix (fixed the battery stats)
fixed SystemUI FC when switching USB mode via status bar notification
fixed GSM / WCDMA preferred / WCDMA Only switching
fixed soft reboot when switching 2G/3G with an enabled mobile data
added Pie Control from Paranoid Android
added SlimRecents
updated AOSP recents implementation ("clear all" button doesn't properly work, so don't enable it or use SlimRecents)
added task manager
allowed disabling of brighness slider disabling
revert AOSP camera to 5.1.1 (fixed the photo cropping issue)
added FAT images mounting via UMS support (use
sys.config.opt_sd0device=full_path_to_the_image.img build.prop setting to override the device mounted as Sdcard0 or sys.config.opt_sd1device for Sdcard1)
26.05.2016 - build #7
Work around wifi autoconnection issue
Fixed video encoding issue by some apps (instagram video upload etc) - thanks to Meticulus for the original patch
Added LockClock back
Added option to show the weather in the status bar
Various small improvements, tweaks etc.
23.05.2016 - build #6
More ROM modules compiled with GCC instead of Clang (GCC supports more optimizations)
Almost ROM modules compiled with Link Time Optimizations
Enabled graphite optimizations for more ROM modules
Added autovectorization optimization on per-modular base
More modules built in ARM mode
Allowed disabling of FC notification
Added time-context custom header images feature
Added customization of the carrier label
Added SystemUI tuner
Added display autorotation setting
19.05.2016 - build #5
updated kernel to r4.4.1
added and enabled by default UMS (USB Mass Storage) mode
re-added some default AOSP optimizations
added navigation bar
added battery level icon customization setting
added long back press to kill app feature
remove 3 secs delay in Superuser before to give the app permissions
added feature of disabling mediascaner at boot
added Sqilte performance improvements
disabled an unnecessary debug
another fixes / improvements
fixed graphical glitches in some apps caused by new UMP lib
resized bootanication (thanks Lemu @ 4pda.ru)
fixed init.d scripts
added aggresive Dynamic governor settings
13.05.2016 - build #4
cleaned up the default google optimizations, removed unnecessary flags
disabled forcible ARM mode optimization - until I revisit this again
added performance settings from OmniROM
added CM Filemanager
added a few more opensource code to libUMP, replacing calls to old library
fxed up an inadeqate CPU time consumption caused by logd process
6.05.2016 - build #3
updated sources to 6.0.1_r30
kernel update to r4.3.1
switched to GCC 5.3 toolchain by UBER
enabled graphite, fast math, loop nest, unsafe loop and some more optimizations
entire build is compiled in ARM mode
switched to opensource RIL libraries (based on CyanogenMod repos)
UMP (Unified Memory Provider) library now is mostly opensource - based upon CM sources
Attempt to fix storage permission issues in some apps such as browser - not tested
fixup for RIL java code - thanks to @SergeyL
disabled scrolling cache
SQLite code optimizations
Reduced various delays
many other fixes and improvements - thanks to SergeyL for patches
20.03.2016 - build #2
fixed APN editor crash
added removed fonts back
removed Gallery, Calendar and PrintSpooler
Viper4Android driver post-install (no need to install manually anymore)
Fixed busybox related issues
20.03.2016 - build #1
initial release
Miscellaneous
reserved
Take some time to try this ROM, and now there are some issues
1.there are lost 4 opentype fonts (compared with Sergeyl's CM13)(JP,KR,SC,TC-Regular),so Simplified Chinese display likes XXX
2.V4A needs to works with busybox, lol...
But ROM works smooth
fim5646 said:
Take some time to try this ROM, and now there are some issues
1.there are lost 4 opentype fonts (compared with Sergeyl's CM13)(JP,KR,SC,TC-Regular),so Simplified Chinese display likes XXX
Click to expand...
Click to collapse
These are removed, because of overly sized ROM. Are these fonts only that support these languages? If so, I'll of course re-add them. I was comparing this ROM to my OmniROM and haven't found these fonts, so I thought they can be safely removed.
2.V4A needs to works with busybox, lol...
Click to expand...
Click to collapse
I guess, it's common 6.0.x problem, as busybox has got partially replaced by toolbox and toybox from AOSP, thus making some apps confused.
ChronoMonochrome said:
These are removed, because of overly sized ROM. Are these fonts only that support these languages? If so, I'll of course re-add them. I was comparing this ROM to my OmniROM and haven't found these fonts, so I thought they can be safely removed.
Click to expand...
Click to collapse
Yeah,these 4 fonts only support Janpanese,Korean,Simplified Chinese and Traditional Chinese,(lastest outdated AOSP 6.0 has same problem...)Maybe OmniROM has different font files
ChronoMonochrome said:
I guess, it's common 6.0.x problem, as busybox has got partially replaced by toolbox and toybox from AOSP, thus making some apps confused.
Click to expand...
Click to collapse
Yeah....
Is there any way to fix sdcard problem?
And thanks for this awesome rom.
Fake2Dead said:
Is there any way to fix sdcard problem?
Click to expand...
Click to collapse
What problem exactly?
What GApps should we install, these modified by SergeyL? open_gapps-arm-6.0-pico-20160204.zip
https://yadi.sk/d/HX0CiHNnoGiC5
Culateralligator said:
What GApps should we install, these modified by SergeyL? open_gapps-arm-6.0-pico-20160204.zip
https://yadi.sk/d/HX0CiHNnoGiC5
Click to expand...
Click to collapse
GApps aren't personally tested by me, but I guess, you'll need those provided by SergeyL else keyboard will crash.
ChronoMonochrome said:
What problem exactly?
Click to expand...
Click to collapse
phone says sandisk sd card is corrupted. I tried to format from phone but it didn't work. Also i can't use my camera without external sdcard. And why extsdcard is sdcard0
"Sorry for my english if a have a fault"
Fake2Dead said:
phone says sandisk sd card is corrupted. I tried to format from phone but it didn't work. Also i can't use my camera without external sdcard. And why extsdcard is sdcard0
"Sorry for my english if a have a fault"
Click to expand...
Click to collapse
Did you format your sdcard as adoptable(internal) storage? This is something you actually shouldn't do and it's explicitly mentioned in the issues list as it doesn't work properly on our devices. SDcard should normally work without formatting (in case of M - which also performs encrypting of it), thanks to @SergeyL work. Now you have to format sdcard from Windows / *nix / whatever other OS; if even this won't help, we'll probably need a volunteer to test it. Personally for me sdcard works, but you may want to try SergeyL's CM13 to see if it's working there.
WiFi is unstable, lost connection from time to time, Web Browser is crashing. And any of gapps do not work - do not fit in system. Yes, i readed first post, i have orginally partitioned internal card and do not want touch it. SergeyL's CM13 work with smallest gapps
ChronoMonochrome said:
Did you format your sdcard as adoptable(internal) storage? This is something you actually shouldn't do and it's explicitly mentioned in the issues list as it doesn't work properly on our devices. SDcard should normally work without formatting (in case of M - which also performs encrypting of it), thanks to @SergeyL work. Now you have to format sdcard from Windows / *nix / whatever other OS; if even this won't help, we'll probably need a volunteer to test it. Personally for me sdcard works, but you may want to try SergeyL's CM13 to see if it's working there.
Click to expand...
Click to collapse
Thank you so much for help. I tried to format from windows(exfat) and it worked!
Edit: Don't try to format sdcard as fat32 it didn't worked on me
Pastorious said:
WiFi is unstable, lost connection from time to time, Web Browser is crashing. And any of gapps do not work - do not fit in system. Yes, i readed first post, i have orginally partitioned internal card and do not want touch it. SergeyL's CM13 work with smallest gapps
Click to expand...
Click to collapse
I can confirm Web Browser is unstable.
I haven't those WiFi problems yet, but I'm testing for little time.
What do you mean with smallest GApps?
I've tried no repartition + SergeyL GApps and I get ERROR CODE 70 -not enough system space-.
Culateralligator said:
I
What do you mean with smallest GApps?
Click to expand...
Click to collapse
I found somewhere gapps ~45MB, still too big for install, i have no idea how install Play shop
New build is 20.03.2016(#2) UP!
Changelog
fixed APN editor crash
added removed fonts back
removed Gallery, Calendar and PrintSpooler to free up some space
Viper4Android driver post-install (no need to install manually anymore)
Fixed busybox related issues
Might fix GApps not being fitted on /system issue in the future, but I'll need a volunteer to test the new partition scheme. If anyone knows how to modify CWM repartition scheme zip and create a new one with ~700-750Mb on /system, it would be even much great, because right now I have absolutely no time for this.
Enjoy!
Something weird... I've connected phone to PC 5-6 times.
Last 2 times appears sdcard1 with 1,09GB (real internal sd).
However, I have access to files of real external sd. But when I try to paste a file, it says I have no space for it.
Succesfully installed gapps removed printspooler webbrowser gallery calendar clock and 1 more thing and i found 48 mb gapps
Culateralligator said:
Something weird... I've connected phone to PC 5-6 times.
Last 2 times appears sdcard1 with 1,09GB (real internal sd).
However, I have access to files of real external sd. But when I try to paste a file, it says I have no space for it.
Click to expand...
Click to collapse
Indeed, it seems that I have misapplied one fix to the vold binary. Does this issue also appear on CM13?
P.s. it's possible that vold from CM13 will also work, because UltimateROM use same sources as CM. Can anyone try replacing /system/bin/vold and check if it helps?

[ROM][GT-P52XX][UNOFFICIAL][6.0.1] CyanogenMod 13.0

Unofficial CyanogenMod 13.0 for Samsung Galaxy Tab 3 10.1​
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, ...
* You flash this at your own risks
*/
About CM
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important information
You need a recent TWRP version to flash this ROM.
Installation
First time installing, coming from another ROM or upgrading from alpha < 4
Copy ROM to SDCard
Copy Houdini to SDCard
Copy GApps to SDCard
Boot into recovery
Backup EFS partition
Wipe -> Advanced Wipe -> Dalvik Cache + System + Cache + Data
Install ROM
Install Houdini
Install GApps
Reboot
First start takes a long time
Upgrading from earlier version of CyanogenMod 13.0 (alpha >= 4)
Copy ROM to SDCard
Boot into recovery
Install ROM
Reboot
[OPTIONAL] Converting filesystem to F2FS (thanks @michiil)
The ROM has F2FS support. You may want to use it instead of the default (EXT4).
This will delete ALL files/data from your tab.
What you will need: A working PC and a working USB cable.
Install the most recent Recovery
Download the most recent Recovery from the second post. Flash the zip file in recovery. Back in the main menu press Reboot > Recovery
Format Data and Cache to F2FS
Wipe > choose Cache > repair or change file system > change file system > F2FS > Swipe to Confirm
Go back and repeat the same steps with Data. I got some error messages when formatting Data but they don't seem to be a problem.
Back in the main menu press Reboot > Recovery
Install Rom + Houdini + Gapps
Connect your tab to your PC and copy the zip files on the tab.
Flash the files, reboot and enjoy :good:
How to get back to EXT4
You will again loose all files/data on the tab.
Just repeat Step 2 but use EXT4 instead of F2FS.
What's working
RIL (audio calls, data, sms, mms)
2D/3D acceleration
HW video encoding/decoding
Screen cast (Miracast/Wifi Display)
MHL/HDMI
Sound
InfraRed
Camera
Wifi
Bluetooth
GPS
Sensors
SDCard, USB OTG
Tethering (USB, Bluetooth, Wifi)
Software DRM (Level 3, see below)
Known to be working
Google Movies
Amazon Prime Video
Molotov TV
myCANAL
Canalplay Kids
Known *not* to be working
6play
Features
Automatic brightness
Change Color profile
Change mDNIe scenario
Enable/disable mDNIe negative mode
Multiuser
Enable/disable capacitive keys
Change capacitive keys width
Buttons backlight on screen touch or key touch only
Smart cover lock/unlock
F2FS and exFAT support
Houdini (allows to install arm only apps on this x86 device)
Updated ZRAM support with LZ4 compression for maximum memory and speed
Updated Xbox Controller driver
Updated interactive CPU governor
Available CPU governors: powersave, interactive, performance, ondemand
Available I/O schedulers: noop, deadline, cfq, bfq (v7r8), fiops
Available battery modes (CM power profiles): power save, balanced, performance
What's not working
Chromecast screencasting (other functions work)
Hardware DRM (Level 1)
SELinux (permissive)
You tell me
How to root
Go to 'Settings/About tablet'
Tap 7 times on 'Build number'
Go back
Go to 'Developer options'
Tap on 'Root access'
Select 'Apps only' ('Apps and ADB' if you plan to use it in adb shell)
How to help
When something is not working correctly, in addition to common informations, I may ask you to provide logs. There are different kind of logs and it's not always easy to get all of them. For this, you can use SysLog (available on F-Droid or Google Play).
Fixed in version 2.1.0 There is currently a bug in the app. Download it from AndroidFileHost. Use this patch if you want to compile it yourself:
Make sure to root device before using this app.
To get the logs:
Start SysLog
Click on 'TAKE LOG'
Once log is taken, SysLog will try to share the resulting file, just cancel
Send me the file /sdcard/SysLog/[YYYY-MM-DD_HH.mm]/[YYYY-MM-DD_HH.mm].zip
If you left 'Scrub potentially personal information from the logs' checked, you should be safe.
Sources
Kernel
Common: https://github.com/santos10-dev/android_kernel_samsung_santos10/tree/cm-13.0
Device trees
Common: https://github.com/santos10-dev/android_device_samsung_santos10-common/tree/cm-13.0
Galaxy Tab 3 10.1 3G: https://github.com/santos10-dev/android_device_samsung_santos103g/tree/cm-13.0
Galaxy Tab 3 10.1 Wifi: https://github.com/santos10-dev/android_device_samsung_santos10wifi/tree/cm-13.0
Galaxy Tab 3 10.1 LTE: https://github.com/santos10-dev/android_device_samsung_santos10lte/tree/cm-13.0
Local manifest
https://github.com/santos10-dev/android_device_samsung_santos10-common/wiki/Local-manifest-CM-13.0
Credits
Angel_666 , moonbutt74 and Restl3ss for starting the work on this device
Android-Andi for his device tree
crpalmer for his work on Intel support
Deltadroid for his GApps package
All testers of the "signup" thread
CyanogenMod and Google for Android
XDA
AndroidFileHost
XDA:DevDB Information
CyanogenMod 13.0 for GT-P52XX, ROM for the Samsung Galaxy Tab 3 10.1
Contributors
nels83
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-03-21
Last Updated 2017-04-11
Downloads
ROM
ROM - Beta 2 (20161210)
Galaxy Tab 3 10.1 3G : santos103g (MD5)
Galaxy Tab 3 10.1 Wifi : santos10wifi (MD5)
Galaxy Tab 3 10.1 LTE : santos10lte (MD5)
You can find old versions on AndroidFileHost. Version code is in file description.
Houdini 6.0.0_x.47745
Houdini for Android 6.0
GApps
See Open Gapps, select Platform x86 and Android 6.0.
Other
Flash player (11.1.112.60)
Flash player for x86
Note: not much used nowadays but useful if you want to play flash games.
Changes
Changelog
Beta 2 (20161210)
- Fixed audio calls
- Switched to dlmalloc
Old changes
Beta 1 (20161204)
- Fixed freezes
- Fixed AGPS
- Cleaned up sensors hal
- Use opensource audio hal
- Added FIOPS io scheduler
Alpha 7 (20161121)
- CM update (android 6.0.1_r74)
- Added software DRM support (Level 3)
- Fixed touchscreen lags (maybe not all lags, thanks to @Alphita and @KNGPN Q w Q)
- Fixed lock screen rotation (thanks to @tinko975)
- Fixed Google SetupWizard loop when no network is available (CM)
Alpha 6 (20161018)
- CM update
- Updated kernel memory management (and removed samsung specific code)
- Updated kernel android drivers
- Fixed button lights always on when disabled
- Fixed rotation (small) bug
- Fixed deep sleep issues
- Fixed many reboot issues
- Enabled CABC
Alpha 5 (20160822)
- Updated to stable/cm-13.0-ZNH5Y branch
- Enabled Doze mode (thanks to @vin_)
- Enabled 180deg rotation by default
- Enabled swap volume keys on rotation by default
- Added MHL/HDMI support
- Added houdini Intel patches for better compatibility
- Added USB charger port support
- Fixed fast/slow charging reports
- Fixed buttons backlight on key touch only
- All kernel modules are now builtin
- Various tweaks
Alpha 4 (20160731)
- Switched back to stable/cm-13.0-ZNH0E branch
Alpha 3 (20160727)
- CM update
- Fixed Flash Player
- Fixed /dev/last_kmsg
- Fixed cpuset
- Tweaked power management
- Implemented CM power profiles (battery modes)
- Added color profile setting (in LiveDisplay)
- Added Advanced Settings (mDNIe scenario, large/small capacitive keys, buttons light on screen/button touch)
- Added stock charger images
Alpha 2 (20160430)
- Based on stable/cm-13.0-ZNH2K branch
- First try at RIL (3G and LTE)
- Fixed Wifi tethering (thanks @deadfun)
- Enabled and tweaked cpusets (fixes SMP "bug")
- Updated and tweaked cpufreq interactive
- Updated xpad driver (thanks @X-Coder)
- Updated kernel config (merged android recommended settings)
- Added bfq io scheduler
- Enabled deadline scheduler
- Enabled powersave cpufreq scaling governor
Alpha 1 (20160321)
- First release
- Based on stable/cm-13.0-ZNH0E branch
Thanka @nels83 i was waiting for this since morning ?
why does RIL not working? its the most important thing for me
Awesome it works
How to Upgrade from CM12?
Spegeli said:
How to Upgrade from CM12?
Click to expand...
Click to collapse
Download TWRP, opengapps, houdini and the rom (corresponding to your device)
Backup all your data (pictures, music etc.) and apps (preferably with apps like titanium backup) to your PC
put the zips from above onto your sd card (if you don't have one, use the internal storage)
boot into recovery of your tab
wipe /system, /cache, /data, dalvik cache and (if you don't have important data like the zips on there) the internal storage
flash the files in the following order:
TWRP (then restart your device into recovery)
ROM
Houdini
Gapps
if you want to do it: reformat /cache and /data now with f2fs
reboot into system
connect your device to the pc again and get your backed up files and apps
reinstall apps through the play store and if you want to: get their data back with Titanium Backup
Done.
EDIT:
it's nice that CM13 is out and that Houdini is working
though I'm going to wait for RIL support before I update
How complicated is it to fix/How long will it take (min)? (if you can say that)
Dj_Fex said:
Download TWRP, opengapps, houdini and the rom (corresponding to your device)
Backup all your data (pictures, music etc.) and apps (preferably with apps like titanium backup) to your PC
put the zips from above onto your sd card (if you don't have one, use the internal storage)
boot into recovery of your tab
wipe /system, /cache, /data, dalvik cache and (if you don't have important data like the zips on there) the internal storage
flash the files in the following order:
TWRP (then restart your device into recovery)
ROM
Houdini
Gapps
if you want to do it: reformat /cache and /data now with f2fs
reboot into system
connect your device to the pc again and get your backed up files and apps
reinstall apps through the play store and if you want to: get their data back with Titanium Backup
Done.
EDIT:
it's nice that CM13 is out and that Houdini is working
though I'm going to wait for RIL support before I update
How complicated is it to fix/How long will it take (min)? (if you can say that)
Click to expand...
Click to collapse
Not possible to Upgrade without loosing all Apps (and there Settings)?
sorry, I won't guarantuee you that anything is working if you leave the data partition and don't format it
even though it might be nice to keep the data
it's safer to backup your the data and apps that you need and then start fresh
and usually it's not even that much of a hassle (you just need to get used to it)
Nels says at the top:
if you come from an earlier version of cm13 then it's possible
but if you come from another rom (cm12) you need to wipe data
@nels83 I just noticed, your changelog link still points to the cm 12 branch (only a copy&paste issue of course so no big deal)
@nels83 Just upgraded from cm12,1 beta 2. This ROM works fine. Thanks
pvt-koffiejunk said:
@nels83 Just upgraded from cm12,1 beta 2. This ROM works fine. Thanks
Click to expand...
Click to collapse
do you fresh install the rom?or just dirty flash it and its work fine?
Anyone know how to make this rom black ?
Rom is buttery smooth, I am having issues with chrome being slow but that also happened on cm 12.1
Lionerx said:
do you fresh install the rom?or just dirty flash it and its work fine?
Click to expand...
Click to collapse
Just dirty. Figured I could always flash again and do the right way.
Strange I don't see option for downloading of GApps 6 86x at open GApps
Mrkijo said:
Strange I don't see option for downloading of GApps 6 86x at open GApps
Click to expand...
Click to collapse
maybe is temporarly down.. it worked for months.. with aosp rom too..
i download it yesterday.
edit:
here are links from few days before..
https://github.com/opengapps/x86/releases/tag/20160320
..
@nels83 just a quick info: if I use your P5210 device tree in my CM 13.0 source, can I build it from scratch? I'd like to experiment with that.
tinko975 said:
maybe is temporarly down.. it worked for months.. with aosp rom too..
i download it yesterday.
edit:
here are links from few days before..
https://github.com/opengapps/x86/releases/tag/20160320
..
Click to expand...
Click to collapse
Thanks, you were right, it was temporary and now it is on again ?
After 20 Hours of Testing, the Rom works good except:
- Kaspersky Internet Security crashed when starting a analysis
- Camera crashed when switching to Focus Effects or Video
The rest seems working fine so far.

[ROM][SM-P605][7.1.2] Unofficial LineageOS/CyanogenMod 14.1 for lt03lte (20.03.2021)

This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
LineageOS/CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS/CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS/CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.0.0-0 or newer recommended)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage14.1 Zip > Swipe, optional: flash GAPPS, SU Addon (before rebooting!)
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.​
Please report no issues, if you
using the official builds (or others than mine)
flashed Xposed
or modified the system
What is working
Everything
No major issues/bugs
Download
Other Builds
GAPPS​
Notes:
- If SIM is not detected/RIL not working, flash 5.1.1 firmware again!
- Enable root: flash SU Addon, Settings > About tablet > tap 5x at build number. Settings > Developer options > Root Access
- just ignore E: Unknown Command errors in TWRP
- Flash GAPPS before reboot first time after flash!
- If using MTP/PTP shows no files, please tap one more at transfer files in notifications
- If something not listed ist not working, please test it also with SELinux permissive (setenforce 0 via Terminal Emulator/ADB Shell or use SELinuxModeChanger)
Changelog:
20210320: Synced sources
20200913: Synced sources, added midi support, disabled 5 GHz AP
20200318: Synced sources
20200124: Synced sources, a few kernel changes
20191101: Synced sources, small changes
20190801: Synced sources, slightly higher volume on speaker and Headset, small changes
20190303: Synced sources,smaller changes
20181226: Synced sources, changed SEPolicy, updated HID driver, small changes
Older
--Lineage--
20181217: Synced sources
20181029: Synced sources, small changes
20180816: Synced sources
20180618: Synced sources (Security Patch Level 2018-05-05), switched to 2048 heap/hwui memory map, sepolicy
20180524: Security Patch Level 2018-05-05
20180424: Synced sources
20180326: Synced sources, small things
20180307: Synced sources, kernel security patches, a few things
20180124: Synced sources, removed libsecril and legacy sd symlink, kernel updates
20171205: Synced sources, RIL changes, implemented stylus gestures
20171026: Synced sources, fixed magnet cover, switched to source built CAF ril, some kernel changes
20170925: Synced sources, fixed camera, kernel updates, sepolicy updates
20170829: Synced sources, switched to msm8974-common kernel (with some changes for our device), CLOCK_BOOTTIME_ALARM support, some smaller changes (Note: Please flash boot.img from post #643 to fix camera!)
20170803: Fixed MpDecision
20170802: Synced sources, only activate button light if they are pressed, added missing low latency record (-->for Skype etc.), updated init and sepolicy, some small improvements and changes
20170723: Synced sources, grant proper unix permissions for netmgrd and rmt_storage, updated sepolicy and init, smaller changes
20170703: Synced sources, removed buggy timekeep (fixes wifi problem), RIL updated (fixes Autotimezone), disabled live display per default, some minor changes
20170626: Synced sources, switched to Sony Timekeep (experimental), added SamsungDoze, enabled sdcardfs, enabled CIFS/NFS, mac access fixed, some kernel changes
20170614: Synced sources (Android 7.1.2_r17), quiet "KERNEL IS NOT SEANDROID ENFORCING"
20170604: Synced sources, fixed a bunch of kernel leaks
20170518: Synced sources, Only expose su when daemon is running
20170507: Synced sources (android-7.1.2_r8, Jelly...), correct keylayout config, enabled volume wake settings, added missing liblight defines, fixed prefered network setting, fixed rotation problem
20170422: Synced sources (Android 7.1.2), F2FS support, changed keylayout again, some kernel changes, IR changes from Lineage, dex preopt (not prerooted, flash SU Addon)
20170320: Synced sources, prerooted again, enabled Miracast/WiDi overlay, added missing SEPolicys for s-pen third party apps
20170301 #2 : Fixed tethering/hotspot (not prerooted, flash SU Addon)
20170301 #1: Synced sources, improved macloader related stuff (not prerooted, flash SU Addon)
20170203: Synces sources, fixed telehony fc after Nandroid restore, enhanced off charging mode
20170126: Synces sources, enabled Blur, a few kernel changes
20170114: Synced sources (Android 7.1.1_r9)
20170104: Synced sources, removed some deprecated stuff (dhcpcd entries, legacy symlinks)
20161231: Synced sources, Bluetooth disabled per default, unknown sources enabled per default
20161227: Synced sources, first Lineage build
--CyanogenMod--
20161215: Synced sources (Android 7.1.1_r6), disable notification LED for now (until I find a better solution), switched to common IR/lights HAL, last build from CyanogenMod Sources
20161207: Synced sources (Android 7.1.1), reduced power consumption, add missing SELinux rule
20161202: Synced sources, fixed magnetic cover, fixed VOIP mic
20161128: Synced sources, fixed off charging Mode, changed keylayout: Menu button: menu, longpressmenu: splitscreen view, doubletaphome: recent Apps
20161115: Synced sources, fixed camcorder, mapped longpressmenu as menu
20161110: Synced sources, Setup Wizard fixed, updated SEPolicy
20163010: first xda release, sync with cm 14.1 sources
Credit: LineageOS/CyanogenMod Team, Maintainer and Valera1978
Kevin F. Haggerty, Paul Keith
Sources:
Device
Kernel
Kernel since 20170829
Vendor
XDA:DevDB Information
Unofficial LineageOS (CyanogenMod) 14.1 for SM-P605, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
Source Code: http://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 bootloader and modem
Based On: LineageOS
Version Information
Status: Stable
Created 2016-10-30
Last Updated 2020-09-17
FAQ - Frequently Asked Questions
FAQ
Please read before posting anything!
Will this work/can you make it work on P600/P601?
Short answer: No! Only SM-P605 is supported.
But there are other projects for your device. For P600 (n1awifi) you can just download the latest official nightly.
Can you add xy feature?
It is and will stay a build straight from LineageOS sources, not a fork, so no. And also afaik there is no feature request way for LineageOS atm.
My SIM card is not recognized. What can I do?
As RIL blobs are from 5.1.1 firmware package, you need to be on modem from 5.1.1 firmware. The easiest way: just get an firmware package from Sammobile, Updato... and flash it via Odin. If it's still not working after that, do the same again (sometimes this is necessary).
Something is not working (correctly) / I found a bug? What should I do?
Make sure there are no potential courses for that issue like installed Xposed or system modifications. Also look, if it's listed in the OP or somebody already mentioned it. If not, just post about it and all information about it you have (circumstances, steps to reproduce it...).
Of course only for my builds you found in that thread, not for other/offical builds.
Amazing work!
Running your 10-27 build since yesterday night and working great so far on my T-Mobile P-607T.
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar.
That's purely cosmetic, the build is fast and stable. Weather location service works, have not tested GPS
nav yet.
Setup wizard worked for me on the 10-27 build.
Will download and test this build.
Thanks for keep supporting the Note 10.1 2014.
Thanks
Thanks for making this sweet build. Everything works well on my P607-TM except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
iandy1 said:
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar..
Click to expand...
Click to collapse
Yes, some stuff for that is not fully ported and implemented yet.
iandy1 said:
Setup wizard worked for me on the 10-27 build.
Click to expand...
Click to collapse
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
temijun said:
except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
Click to expand...
Click to collapse
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Yeah you're absolutely right about the radio firmware once I upgraded baseband from P607TUVUBOI2 to P607TUVSBPH1 and reflash everything works as expected! thanks again for this awesome rom!
davidmueller13 said:
Yes, some stuff for that is not fully ported and implemented yet.
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Click to expand...
Click to collapse
firmware is very smooth, but
- Sometimes crash settings app
- Does not work the microphone during a call through Skype
Does this version fix the bug that I saw with rotation?
Edit. Isn't a bug. Settings disabled rotation for certain orientation by default. Need fix by changing in settings.
it cant read my sim
Does it support exfat or ntfs file system with write rights?
great rom..sometimes a little bit stuttering, but finally great to have 7.1
how do you use your stylus? do u have a special app for that?
Thank you again
ameenkhaled said:
it cant read my sim
Click to expand...
Click to collapse
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Hooray! One more of my devices could hop on CM14.x! I think imma start building myself starting next month...
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Sent from Google Nexus 6P @ CM13
AndyYan said:
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Click to expand...
Click to collapse
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
temijun said:
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Click to expand...
Click to collapse
Does PH1 update the baseband? I extracted modem.bin from PH1 tar and flashed, and later flashed the whole PH1 package from Odin, but baseband stays at OI2...
Sent from Google Nexus 6P @ CM13
---------- Post added at 05:38 PM ---------- Previous post was at 05:37 PM ----------
davidmueller13 said:
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
Click to expand...
Click to collapse
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Sent from Google Nexus 6P @ CM13
AndyYan said:
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Click to expand...
Click to collapse
I think, it's the same issue. If you want to build TWRP you should use a OmniROM source tree (i change the device tree for that a bit :https://github.com/davidmueller13/device_lt03lte_nougat/tree/omni ).
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Yes, that is normal. I don't know how to fix it myself without gravitybox. That option won't work because 7.0/7.1 has no xposed support yet.
Sent from my LG-H850 using XDA-Developers mobile app
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Manually edit the .kl file in /system/usr/keylayout (can't remember which, but should be obvious).
Sent from Google Nexus 6P @ CM13
Cirno5 said:
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Change in sec_touchscreen.kl in system/usr/keylayout "APP_SWITCH VIRTUAL" to "MENU VIRTUAL".
I think, i will change it in the next build and set the app switch to "long press home" and disable "double tap home".
Good news for camcorder: I fixed recording, but we have to wait for some changes in CM14.1. But at least it works for our device finally in CM13.

Categories

Resources