Hi,
My Sprint Note 3phone is currently using a Kitkat ROM and TWR recovery. I tried some Lollipop ROMS. After flash the ROM, the phone boot to the page of Android setting, then the UI crashed and the phone reboot, showing Modem error.
Anyone has similar experience or have any idea why this happen? Thanks a lot.
quantlego said:
Hi,
My Sprint Note 3phone is currently using a Kitkat ROM and TWR recovery. I tried some Lollipop ROMS. After flash the ROM, the phone boot to the page of Android setting, then the UI crashed and the phone reboot, showing Modem error.
Anyone has similar experience or have any idea why this happen? Thanks a lot.
Click to expand...
Click to collapse
Hey bud first can you get into download mode ? If so great, now back up all your ( music, video, pics ) to the desktop of your PC or sd card. Download a fresh copy of Lollipop 5.1.1 to the desktop of your PC. Boot into download mode and odin flash the stock lollipop 5.1.1 OS the modem comes with it. Then root it and odin flash a TWRP recovery version compatible with lollipop. Now make a back up of your rooted lollipop OS, OK now your ready to flash lollipop ROMS !!!
For more info click on rom flashing basics in my signature.
Related
I have installed custom rom cyanogenmod cm-11-20140806-NIGHTLY-n7100 and It works fine and after that I wished to go back to my stock rom which is Android Kitkat 4.4.4 , So I took a backup of my stock rom and moved to computer's hard disk
After I restored using clockworkmod recovery version 6.0.4.3 I restored my old stock rom .. but the problem is when i unlock from lock screen this message "unfortunately com.google.process.gapps has stopped working " keeps popping and I cannot get rid of it..
Now I again installed custom rom and I think the gapps version and stock rom android version is not syncing...please help me to recover my stock rom
mismatched versions maybe
Are you hard set on installing your recovery image?
You could download the correct stock firmware and gapps for your phone by searching google (i would link something to you but im new)
Take a look here: http://forum.xda-developers.com/showthread.php?t=1896696
---------- Post added at 06:17 AM ---------- Previous post was at 06:09 AM ----------
Sailor spinach said:
Are you hard set on installing your recovery image?
You could download the correct stock firmware and gapps for your phone by searching google (i would link something to you but im new)
Take a look here: http://forum.xda-developers.com/showthread.php?t=1896696
Click to expand...
Click to collapse
Scroll down to the first section and it will send you to sammobile to download your stock firmware.
At sammobile click Firmware, then to the right side and down a bit there is a "search device here" box. Enter n7100 and you should find when you need!
Hope this helps!!
vignesh1990 said:
I have installed custom rom cyanogenmod cm-11-20140806-NIGHTLY-n7100 and It works fine and after that I wished to go back to my stock rom which is Android Kitkat 4.4.4 , So I took a backup of my stock rom and moved to computer's hard disk
After I restored using clockworkmod recovery version 6.0.4.3 I restored my old stock rom .. but the problem is when i unlock from lock screen this message "unfortunately com.google.process.gapps has stopped working " keeps popping and I cannot get rid of it..
Now I again installed custom rom and I think the gapps version and stock rom android version is not syncing...please help me to recover my stock rom
Click to expand...
Click to collapse
Well, before flashing the stock ROM try going to the application manager and try clearing the cache and the data stored by the Google Play services app. and if that still doesn't helps you out then you can move forward with flashing the stock ROM over your device.
vignesh1990 said:
I have installed custom rom cyanogenmod cm-11-20140806-NIGHTLY-n7100 and It works fine and after that I wished to go back to my stock rom which is Android Kitkat 4.4.4 , So I took a backup of my stock rom and moved to computer's hard disk
After I restored using clockworkmod recovery version 6.0.4.3 I restored my old stock rom .. but the problem is when i unlock from lock screen this message "unfortunately com.google.process.gapps has stopped working " keeps popping and I cannot get rid of it..
Now I again installed custom rom and I think the gapps version and stock rom android version is not syncing...please help me to recover my stock rom
Click to expand...
Click to collapse
m facing the same issue no fix
I recently flashed my Lenovo P780 which was running 4.4.2 to MIUI V5 4.8.27 ROM using the guideline mentioned in this thread http://forum.xda-developers.com/len...iui-v5-4-6-2-jb-4-2-lenovo-p780-dual-t2795361
I also used the recovery image mentioned this thread http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605 using mobileuncle.
I followed every step mentioned in the thread and flashed the rom. Now my device is booting but is stuck at boot. All I can see is MI.com logo. It is stuck like this for more than 30 mins.
I am unable to go back to recovery mode also. I don't know what to do. Please someone help!!
Ok. I solved the issue. Since I flashed the ROM when my Lenovo was running stock kitkat 4.4.2, the MIUI was stuck in bootloop.
What I did was I reflashed my P780 with LIFE ROM V7 using Flashtool. Then I flashed MIUI using TWRP. Now it works fine.
eashwar83 said:
Ok. I solved the issue. Since I flashed the ROM when my Lenovo was running stock kitkat 4.4.2, the MIUI was stuck in bootloop.
What I did was I reflashed my P780 with LIFE ROM V7 using Flashtool. Then I flashed MIUI using TWRP. Now it works fine.
Click to expand...
Click to collapse
Yes, I also did the same thing. Life ROM is Savior with TWRP recovery built in. Whenever, I had a wrong flash and my mobile is dead, I returned to this by flashing with SP Tools, boot straight into TWRP and then restored my previous working ROM or tried flashing another ROM.
Welcome to MIUI world. I am sure you will enjoy this ROM. Go for OTA update to 4.8.30 which worked like breeze for me. Try the Android V5 Dark theme. You will love it.
ganapathyraman_s said:
Yes, I also did the same thing. Life ROM is Savior with TWRP recovery built in. Whenever, I had a wrong flash and my mobile is dead, I returned to this by flashing with SP Tools, boot straight into TWRP and then restored my previous working ROM or tried flashing another ROM.
Welcome to MIUI world. I am sure you will enjoy this ROM. Go for OTA update to 4.8.30 which worked like breeze for me. Try the Android V5 Dark theme. You will love it.
Click to expand...
Click to collapse
Oh! I was going to ask whether OTA update to 4.8.30 was safe. Thanks for letting me know.
My lenovo softbricked after I tried to OTA update MIUI 4.8.27. Then, as you guys said, I installed Life Rom V7 and when I tried installing either MIUI 4.6 and 4.8.27 through TWRP, Roms got installed without any boot issue but I couldn't open any of the apps, even system apps like Dialer and File Explorer. Any suggestions? I would really love to go back to MIUI. May be there is a way to repack it and install through Flashtool?
Sent from my Lenovo P780 using XDA Free mobile app
eashwar83 said:
I recently flashed my Lenovo P780 which was running 4.4.2 to MIUI V5 4.8.27 ROM using the guideline mentioned in this thread http://forum.xda-developers.com/len...iui-v5-4-6-2-jb-4-2-lenovo-p780-dual-t2795361
I also used the recovery image mentioned this thread http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605 using mobileuncle.
I followed every step mentioned in the thread and flashed the rom. Now my device is booting but is stuck at boot. All I can see is MI.com logo. It is stuck like this for more than 30 mins.
I am unable to go back to recovery mode also. I don't know what to do. Please someone help!!
Click to expand...
Click to collapse
I am still stuck with this problem. flashed using TWRP on 4.2 JB version for P780. Not sure what the problem is ?
maverickvarun said:
I am still stuck with this problem. flashed using TWRP on 4.2 JB version for P780. Not sure what the problem is ?
Click to expand...
Click to collapse
Soooo... MIUI is for Jelly Bean not for KITKAT.
DO NOT FLASH OVER KITKAT.
IF YOU FLASH OVER KITKAT YOU WILL HAVE ALOT OF PROBLEMS LIKE: YOUR SD CARD WILL NOT WORK(THIS IS THE SMALLEST PROBLEM), BOOTLOOP,BOOTLOADER CORUPTED, ETC ETC.
SO BE WARNED...
If you want to test MIUI do this:
1. Flash stock s124 ROM;
2. Download Framaroot and root your phone;
3. Install Mobileuncle Tools;
4. Get TWRP 2.6.3.0 no other;
5. Flash TWRP with Mobileuncle Tools;
6. Download MIUI and put it in your phone SD Card;
7. Install from market Reboot Manager, give root right and reboot to recovery;
8. From SD Card flash MIUI wipe cache dalvik etc etc;
9. reboot and voila MIUI.
10 Good Luck.
I'm stuck having this problem ever since i Flash Stock Firmware 5.1.1 on my SM-G925I
Previously, i was running on Stock Firmware 5.0.2 with Root without any Custom Rom. What i did was... I just Flashed the new Firmware i've downloaded from SamM0bile. Done! So next i just try to Root my phone again using the AndroidRootz method (which i did for my 5.0.2 Firmware) & while trying to get into Recovery Mode i get this error.
I click on my SuperSU app which was already installed on previous Root it does nothing, then i check for a Software Update it says my Device is modified.
I have this feeling is related to the TWRP.tar file i Flashed.
PLEASE HELP.....
As soon as you put on that custom recovery you will get that error on 5.1.1, I get that everytime I boot my phone with a custom rom.
dwarfer66 said:
As soon as you put on that custom recovery you will get that error on 5.1.1, I get that everytime I boot my phone with a custom rom.
Click to expand...
Click to collapse
Any remedy??
No mate, thats Samsungs way of punishing us users of custom roms!
Hello all. After trying to get various Custom ROMs working, CM 11, 13 or Slimkat 9, unofficial 9.1, no version worked properly with phone signal.. I ended up experimenting with flashing modems or going back to stock firmware and doing all the steps from there but still couldn't make it work.
Stock firmware that came with the phone 4.1.2 (KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship) was perfectly fine also (I9300XXUGPE1_I9300AMNGPF1_I9300BVUGNB2_HOME) which it's 4.3 from orange spain was fine, tried one from my country and ran fine, also 4.3. Then I found out about this thread:
https://forum.xda-developers.com/galaxy-s3/help/guide-emergency-calls-problem-siii-i9300-t2752541 and by mistake I flashed first the patched modem following this order of events :
4.1.2 STOCK > 4.3 Movistar STOCK > Slimkat Unofficial 9.1 latest > all fine but no signal. Then:
4.1.2 STOCK > 4.3 Movistar STOCK > Slimkat Unofficial 9.1 latest > flashed patched modem from thread above, boot loop.
Then tried to flash the original stock from the phone, didn't work. Stock from my country doesn't work. Stock from spain doesn't work but it goes a bit further in the first boot going to android updating apps , it finishes updating apps and goes into boot loop. That's it. At the moment I can flash with odin or go into downloading mode. When the phone is off, it can manage to charge the battery without problem.
How should i proceed now?
Thank you, I hope you can help or advice me.
EDIT 1: I also tried to flash the firmware from the above thread, the i9300 UK (BTU) but no luck.
GU37 said:
Then tried to flash the original stock from the phone, didn't work. Stock from my country doesn't work. Stock from spain doesn't work but it goes a bit further in the first boot going to android updating apps , it finishes updating apps and goes into boot loop. That's it. At the moment I can flash with odin or go into downloading mode. When the phone is off, it can manage to charge the battery without problem.
Click to expand...
Click to collapse
Odin can't flash a stock ROM or you can flash a stock ROM but the ROM doesn't boot all the way?
audit13 said:
Odin can't flash a stock ROM or you can flash a stock ROM but the ROM doesn't boot all the way?
Click to expand...
Click to collapse
Hey again audit13. It can flash the ROM fine but it gets stuck in boot loop. I'm trying to find the stock ROM with the 3 files but no luck yet, im hoping that can get to do a proper reset factory of everything.
Are you flashing the latest stock ROM from sammobile.com? This file would have everything in one file.
audit13 said:
Are you flashing the latest stock ROM from sammobile.com? This file would have everything in one file.
Click to expand...
Click to collapse
This one ?
Code:
Date
2016-08-01
Country/Carrier
Spain (Orange)
Version
4.3
PDA
I9300XXUGPE1
CSC
I9300AMNGPF1
This one gets to passed the first time the loop till android updating apps dialogue, then goes to boot loop.
Are you performing a factory wipe using stock recovery before booting the flashed stock ROM for the first time?
audit13 said:
Are you performing a factory wipe using stock recovery before booting the flashed stock ROM for the first time?
Click to expand...
Click to collapse
Wiped, then did a reboot in the default recovery mode. All went to normal again. I still need to figure out how to get a Custom ROM without screwing up everything again.. Thanks for your quick support.
Glad you got it working. One thing I would not recommend is flashing a patched modem. The stock modem is the best modem in my opinion.
Hello.
What is the last and best custom ROM for the Galaxy Wifi 5.0, and where can I find the files?
Thanks.
Meticulus.co.vu to download the latest but listen to me you need to start with cwm, then flash meticulous 4.4.4 to update the cwm, then flash twrp to get 5.1.1 installed, here. I figured out the exact steps to get this device working perfectly again. Firstly the twrp folder on the external sd card has to be renamed TWRP because it has extra strange characters after the TWRP. Now we know how to restore our backup, we can start by ODIN back to stock, then Framaroot v1.4.1 root the device then download entropys daily driver kernel cwm, the flash it via terminal emulator, reboot, then you have to install meticulous carbon 4.4.4 to fix the partitions and update the cwm to adb sideload the twrp. So you can then flash Meticulus Carbon 5.1.1 and both updates and 5.1.1 pico gapps. Good to go. Meticulus made the kernel overclock to 1.7ghz and it runs pretty darn good honestly. I modded the build.prop vm dalvik heap limit to 384m from 128m to get some extra performance out of it.
chris1892006 said:
Meticulus.co.vu to download the latest but listen to me you need to start with cwm, then flash meticulous 4.4.4 to update the cwm, then flash twrp to get 5.1.1 installed, here. I figured out the exact steps to get this device working perfectly again. Firstly the twrp folder on the external sd card has to be renamed TWRP because it has extra strange characters after the TWRP. Now we know how to restore our backup, we can start by ODIN back to stock, then Framaroot v1.4.1 root the device then download entropys daily driver kernel cwm, the flash it via terminal emulator, reboot, then you have to install meticulous carbon 4.4.4 to fix the partitions and update the cwm to adb sideload the twrp. So you can then flash Meticulus Carbon 5.1.1 and both updates and 5.1.1 pico gapps. Good to go. Meticulus made the kernel overclock to 1.7ghz and it runs pretty darn good honestly. I modded the build.prop vm dalvik heap limit to 384m from 128m to get some extra performance out of it.
Click to expand...
Click to collapse
I have tried but something went wrong.
Now when I boot I have a black screen with "NUTELLA" and a logo with "M".
If I use recovery mode a menu with yellow items is shown but every installation from ZIP file fails with the error:
E: failed to map file
Installation aborted.
Any suggestion ?
Thanks !
erlofp said:
I have tried but something went wrong.
Now when I boot I have a black screen with "NUTELLA" and a logo with "M".
If I use recovery mode a menu with yellow items is shown but every installation from ZIP file fails with the error:
E: failed to map file
Installation aborted.
Any suggestion ?
Thanks !
Click to expand...
Click to collapse
www.meticulus.co.vu/p/yp-g70.html
1st download this - https://androidfilehost.com/?fid=24591023225177417 + update 1 & 2 here =
https://androidfilehost.com/?fid=24665542585483890
https://androidfilehost.com/?fid=24686680535466961
2nd make sure you have cwm 5.0.2.7 because that Meticulus KK Carbon 4.4.4 rom will update to the version of cwm required to install twrp 2.8.0.0
3rd install the twrp 2.8.0.0 after you updated your cwm via the rom above, it auto-updates the cwm to the version required to have to flash twrp 2.8.0.0
twrp here - https://androidfilehost.com/?fid=24686680535466961
then install Meticulus 4.4.4 KK Carbon 4.4.4 make sure to put them in folders to know the KK is 4.4.4 and LP is 5.1.1
it fixes the partitions so it can take the 5.1.1 meticulous rom make sure to install the updates
ps - 4.4.4 is faster than 5.1.1
test 4.4.4 KK kit kat first then try 5.1.1 …. I'm using 5.1.1 because its newer but its really slow.
rom 5.1.1 - https://www.androidfilehost.com/?fid=24572369242688755
update 1 - https://www.androidfilehost.com/?fid=24665542585483911
update 2 - https://www.androidfilehost.com/?fid=24686680535466111
Finally I has been able to restore my device and install KK.
Now I will try it for some days and then will decide if upgrade to CM12
Some problems because .meticulus site is down today ( deleted ???? ) and because Odin with Win10 doesn't recognise my device. fortunately I still have a WinXP machine that works like a charms !
erlofp said:
Finally I has been able to restore my device and install KK.
Now I will try it for some days and then will decide if upgrade to CM12
Some problems because .meticulus site is down today ( deleted ???? ) and because Odin with Win10 doesn't recognise my device. fortunately I still have a WinXP machine that works like a charms !
Click to expand...
Click to collapse
KK works but seems slower than 2.3.6.
Is CM12 even slower than KK ?
erlofp said:
KK works but seems slower than 2.3.6.
Is CM12 even slower than KK ?
Click to expand...
Click to collapse
Yeah I'm using Slim Rom 4.3.1 right now but the camera is broken the pictures are blurry and the result is a corrupt file capture. So now I have to find another rom that'll work better.
Meticilius roms are laggy as all get out so idk what to do. I'm going to re-read my post on how to do these tricks anyway its been a while since i messed with it.
*UPDATE* I find Meticulus 4.4.4 works best for now at least the camera isnt broken but no overclock stability sadly but its fine. If only this device had 2gb ram it would be way more fun to play around with.
sadly the link posted for TWRP for the YPG70 was just the same link all over again.
does anyone happen to have the most recent TWRP?
what I want to do is repurpose my Galaxy Wifi Player to view the remote status of my car, so all it needs is a working screen, web browser and wifi.
speculatrix said:
sadly the link posted for TWRP for the YPG70 was just the same link all over again.
does anyone happen to have the most recent TWRP?
what I want to do is repurpose my Galaxy Wifi Player to view the remote status of my car, so all it needs is a working screen, web browser and wifi.
Click to expand...
Click to collapse
https://www.mediafire.com/file/uyhoyrubtjtzzm9/TWRP-2.8.0.0-venturi-flashable.zip/file
thanks @chris1892006 that's very kind of you.
chris1892006 said:
Meticulus.co.vu to download the latest but listen to me you need to start with cwm, then flash meticulous 4.4.4 to update the cwm, then flash twrp to get 5.1.1 installed, here. I figured out the exact steps to get this device working perfectly again. Firstly the twrp folder on the external sd card has to be renamed TWRP because it has extra strange characters after the TWRP. Now we know how to restore our backup, we can start by ODIN back to stock, then Framaroot v1.4.1 root the device then download entropys daily driver kernel cwm, the flash it via terminal emulator, reboot, then you have to install meticulous carbon 4.4.4 to fix the partitions and update the cwm to adb sideload the twrp. So you can then flash Meticulus Carbon 5.1.1 and both updates and 5.1.1 pico gapps. Good to go. Meticulus made the kernel overclock to 1.7ghz and it runs pretty darn good honestly. I modded the build.prop vm dalvik heap limit to 384m from 128m to get some extra performance out of it.
Click to expand...
Click to collapse
Is there any video to follow steps? Please help me. Thank you.
I'm sorry but I forgot how to do it from the gingerbread is what it comes with by stock right? Reading my posts on here I tell exactly how to do it around these threads somewhere around here on xda. Sorry bro. Keep in touch. BTW - the device is best left stock because its useless for anything for anything other than for musicolet music player or music folder player & mx player. I'd be pleased with stock because all I use mine for is Music only.