xperia p dead - Sony Xperia P, U, Sola, Go

while installing cm 12/custom ROM using twrp i wiped Data, Cache, Dalvik Cache and mistakenly wiped sdcard also in wipe system. so while installing cm12/rom i cant find any files . the problem is i reboot it to system and cant enter into recovery mode and phone is dead.what could be the solution for this (need help)?

Related

[Q] didn't create backup?

what happens if you wipe data / factory rest , wipe cache, and wipe dalvic without doing a backup?? i have access to recovery but my phone doesnt go pass the tmobile screen. can g=it be fixed or is it bricked now?
jmoney86 said:
what happens if you wipe data / factory rest , wipe cache, and wipe dalvic without doing a backup?? i have access to recovery but my phone doesnt go pass the tmobile screen. can g=it be fixed or is it bricked now?
Click to expand...
Click to collapse
You delete system files in phone what won't boot up without it..only your suggestion is copy on sd card some custom rom and then flash it..if you would like to have official then use KDZ..
download miks cm7 6.5.7 put it into yours sd card then follow the steps below
1] reebot into recovery
2] wipe all data, dalvik cache, factory reset data.
3] format system data
4] press on install zip from sd card
5] choose zip file
6] choose miks 6.5.7
7] let it flash will take about 4-5 mins
8] reebot system now it will work
this will work on cmw recovery and twrp recovery dont know about amonra recovery.
NOTE:if u can access your recovery your phone is not bricked.

How to change ROMS from Lite'ning to MIUI

Im using a galaxy s2 with Lite'ning rom (android 4). But i couldnt resist the MIUI UI (android 2) so decided to change to it. I placed my zip files in the internal storage and reboot CWM to install the zip. But to no avail, my phone gets stuck in boot loop twice. so im wondering is it because of the different android version that my phone refuse to boot? How can I overcome it to install MIUI?
Thanks in advanced
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I missed the Wipe Dalvik Cache. Will try again later. Thanks for your help ^^
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I did all of this and it still loops at welcome screen T_T
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Chakker3D said:
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Click to expand...
Click to collapse
still fails. everytime it bootloop, i need to use odin to install lite'ning to enter CWM again
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware or even your original firmware .
Still fails install old bootloader .
jje
hi
hi there
here is the best way solve ur problem as this has happened to me as-well,
first thing is download the stock rom form sammobile.com, then flash it using odin and then re-root and install CWM then install Miui Rom, if ur still stuck in the boot-loop then do a full wipe, if still stock, then try a deferent miui rom customized here is whet i have in my phone and its amazing and fast and batter saver for me,
MIUISP V.12 by Dragon
i hope this was helpful for you
Regards
iMatrix

My X10i Won't Turn On after flashed achotjan`s 4.1.2 rc3

i have flashed Achotjan_4.1.2_Somc_Debrand_Engine_V1.0_RC3_x10 on my x10i but now my x10 wont open i did everthing what achotjan wrote for installation. first my x10 ask first time simlock after that reboot by itself and now not open am i bricked my x10 or what can i do. sorry for bad english
INSTALLATION
Flash 4.1.2 SDE Kernel "
Go to CWM Recovery
Do a factory reset
Wipe Cache Partition
Wipe Dalvick cache
Format System
Format Data
Format Cache
Flash the dowloaded ROM package via CWM Recovery (the rom you downloaded in this thread)
Reboot
now phone is starting but there is only kernel amblem after that green light turn white
Format System
Format Data
Format Cache
is this normal to flashing
hi i have flashed with this rom's kernel and now phone is working
http://forum.xda-developers.com/showthread.php?t=1767916

(kiwi)honor 5x bootloop XenonHD Custom ROM...Please Help!

Hey there I installed xenon HD ROM on my honor 5x(kiwi) after that my phone stuck on bootloop. tried erasing dalvik/ART cache(TWRP Recovery) but that doen't help! Listing the steps followed
Placed ROM nd Gapps in SD card
Wipe System
install Zip Files
erase dalvik/ART cache(TWRP)
Reboot
Phone is stuck into a bootloop
Rebooted into recovery
(tried formatting once-and many times without)
erased dalvik/ART cache
erased cache
reboot
phone is still stuck in bootloop
PLease help, this has happened me for the second time(I've tried installing CM14{before its shutdown} without any luck and the same problem)

Please help me my phone resulted in bootloop after flashing Crdroid rom

I wiped dalvik cache, cache, data, vendor & data.
then i flashed rom & pico gapps
what did i do wrong ? or what should i do now ?
You shouldn't have wiped the vendor
Now to solve that you must flash the stock ROM which will restore the vendor and then flash the twrp image
and then wipe dalvik cache, cache, and data but not vendor
then flash the boot img and the rom
but after all this the phone will still won't start
so after flashing the boot img and rom and other files with the rom ,
clear the data,dalvik cache, cache and internal storage
after all this your realme 3 pro will start
I had faced same problem and all the steps are tried and tested by me personally

Categories

Resources