Related
I downloaded the only official update from the HTC america website and when I try and run the update, I lose my active sync connection. It stays connected until I try to run the software. Also, it works fine when transferring anything else like music, pics, or vids or whatever. I can usually figure stuff out, but since I just got this thing and Im no computer programmer I was hoping one of you genius computer guys could help me out.
shane
read the wiki ...
Thats funny, I knew someone one reply with that. I already have. I would try to upgrade using the sd card but the instructions are obviously for someone who know about the stuff. How about someone giving me some better instructions on how to use the sd card to upgrade. I dont get all the extract the .nbh file and do this that and the other. All I see on my pc is the program I downloaded. I click on it and it runs the program, I have no clue how to extract files by right clicking because there is no option when I right click to extract files.
one of you pc usb is rubbish i got a macbook running vista and one of my usb i cant use to flash roms or it will just die i think power isue just change usb port
jdac21 said:
one of you pc usb is rubbish i got a macbook running vista and one of my usb i cant use to flash roms or it will just die i think power isue just change usb port
Click to expand...
Click to collapse
If you have a computer with lots of stuff plugged in by USB, they are sharing the same 5V that is required by the Hermes.
IE - a computer with 6 port USB (3x2), each 2 USB are sharing 5V
plug 1 out and leave in hermes just for flashing period
so it get full 5v
Ok, I downloaded Winrar and tried to extract the .nbh file and that didnt work either. Instructions in wiki says put it in bootloader, but when I do, I get a screen with like four different colors...Not the one on the pic in the wiki. I only have two usb ports and this is from my laptop. I am only using one port when I try and I do have the power plugged in when I try. Its windows xp if it matters. Im at a loss. Does this mean I wont be able to upgrade my 8525 at all? Maybe someone can give some better instructions on going through the sd card and getting into the right bootloader mode?
Shane
anybody want to chime in and help me out here?
AS version is current?
have you tried out a different cable?
consider using a different pc/notebook.
first thing to do here is to troubleshoot connection with AS. once you fix that problem, you should have no problems upgrading..
also, make sure your device is not set on a power/battery saving scheme. make sure its set to be always on with external power.
It's normal that when you do the upgrade, your activesync it supposed to automatically disappear. I had the same issue and I downloaded the ATT official ROM from this site, using that to upgrade. It upgraded my firmware and WM6 also. After that, I use the unlock CID to unlock my phone and Ihave been able to do upgrade serveral WM6 after that ... Goodluck.
I presume you have HardSPL'd your phone?
I only now every flash from the MicroSD card, much safer than using USB as that can be very flakey depending on which machine your using it on.
gt2slo, you need to do a little more reading if you haven't already but flashing from the MicroSD is pretty straight forward. You have to open the ROM you are using with WinRAR and extract the .nbh file to anyway on your hard drive. It always works.
The screen you saw in the WIKI is the one that comes up after going into bootloader and the device sees a file called HERMIMG.nbh on the MicroSD card
Hellol everyone, i have read thru the forums and i still have not gotten the answer i was looking for. I am trying to download android sdk.
I can install it and all, but once i click the SDK manager, a black cmd prompt pops up and then vanishes. Also i cant install a drive for my erissince everytime i try to locate the file (and i do), it says that it couldnt locate the folder.
I have read thru the website's guide and installed jdk. Im on a 32bit Vista. Droid eris phone.
ilikeyoumore said:
Hellol everyone, i have read thru the forums and i still have not gotten the answer i was looking for. I am trying to download android sdk.
I can install it and all, but once i click the SDK manager, a black cmd prompt pops up and then vanishes. Also i cant install a drive for my erissince everytime i try to locate the file (and i do), it says that it couldnt locate the folder.
I have read thru the website's guide and installed jdk. Im on a 32bit Vista. Droid eris phone.
Click to expand...
Click to collapse
What do you mean, you can't install a drive? Do you mean you can't mount the SD card? Have you tried installing HTC Sync for the Eris from HTC's website? I know the SDK is supposed to have the drivers necessary, too, but just a thought.
After the Command Prompt vanishes, can you use the SDK Manager then? Have you selected any Available Packages to download and install from the SDK (if you need anything besides the tools).
Also, I see that they changed the organization of the SDK sub-folders as of v8. aapt.exe and adb.exe, and some other files are now in the platform-tools sub-folder now instead of the tools sub-folder.
roirraW "edor" ehT said:
What do you mean, you can't install a drive? Do you mean you can't mount the SD card? Have you tried installing HTC Sync for the Eris from HTC's website? I know the SDK is supposed to have the drivers necessary, too, but just a thought.
After the Command Prompt vanishes, can you use the SDK Manager then? Have you selected any Available Packages to download and install from the SDK (if you need anything besides the tools).
Also, I see that they changed the organization of the SDK sub-folders as of v8. aapt.exe and adb.exe, and some other files are now in the platform-tools sub-folder now instead of the tools sub-folder.
Click to expand...
Click to collapse
I can mount it, but every time i plug it in, it asks me to install a drive. I have tried to direct it to the sdk folder but it wont connect. I have also tried HTC sync and i cant get the drivers intalled either becuase it wont recognize my phone.
After the cmd promt vanishes nothgin happens; its like i didn't click it at all.
No, i have not installed any additional packages. By the way, i do not have a platform-tools folder, just add-ons, platforms, tools, sdk manager(which doesn't work), read me and uninstall.
ilikeyoumore said:
I can mount it, but every time i plug it in, it asks me to install a drive. I have tried to direct it to the sdk folder but it wont connect. I have also tried HTC sync and i cant get the drivers intalled either becuase it wont recognize my phone.
After the cmd promt vanishes nothgin happens; its like i didn't click it at all.
No, i have not installed any additional packages. By the way, i do not have a platform-tools folder, just add-ons, platforms, tools, sdk manager(which doesn't work), read me and uninstall.
Click to expand...
Click to collapse
Well let's take one step at a time. I'm concerned that you say you can't get HTC Sync's drivers to install. Are you sure you've tried the right one (meant for the Eris)? It should be version 2.0.33 and apparently it's dated 4/23/2010. Download it again from the link on this page http://www.htc.com/us/support/droid-eris-verizon/downloads/, unplug your phone, install HTC Sync completely, then plug your phone in. Wait for Windows to install all the drivers, it may take a few minutes to finish.
What method are you trying to use to mount your SD card to the computer? Meaning, are you using the official method from the phone to mount it from the notifications menu, for instance, and which dismounts the SD card from the phone as long as it's mounted to the computer?
Does everything else in Windows Vista work right? Are you able to plug USB flash drives and/or external hard drives in and have them work?
I forget the circumstances, but in the past (not right now), maybe when I'm not using my phone for tethering, Windows gave me a drive letter for my phone as long as it was plugged in, even when I didn't choose to mount the SD card. Trying to view the contents of the drive letter results in an error until you actually tell the phone to mount the SD card as USB storage.
roirraW "edor" ehT said:
Well let's take one step at a time. I'm concerned that you say you can't get HTC Sync's drivers to install. Are you sure you've tried the right one (meant for the Eris)? It should be version 2.0.33 and apparently it's dated 4/23/2010. Download it again from the link on this page http://www.htc.com/us/support/droid-eris-verizon/downloads/, unplug your phone, install HTC Sync completely, then plug your phone in. Wait for Windows to install all the drivers, it may take a few minutes to finish.
Click to expand...
Click to collapse
Done, nothing much happened. when i open HTC sync it says disconnected and i cannot find my phone for phone monitor options, nor sync (it's plugged in).
roirraW "edor" ehT said:
What method are you trying to use to mount your SD card to the computer? Meaning, are you using the official method from the phone to mount it from the notifications menu, for instance, and which dismounts the SD card from the phone as long as it's mounted to the computer?
Click to expand...
Click to collapse
Yes the notification method. I use the same method to dismount it. I have KaosFroyo v38 ROM.
roirraW "edor" ehT said:
Does everything else in Windows Vista work right? Are you able to plug USB flash drives and/or external hard drives in and have them work?
Click to expand...
Click to collapse
Yes, everything works fine.
roirraW "edor" ehT said:
I forget the circumstances, but in the past (not right now), maybe when I'm not using my phone for tethering, Windows gave me a drive letter for my phone as long as it was plugged in, even when I didn't choose to mount the SD card. Trying to view the contents of the drive letter results in an error until you actually tell the phone to mount the SD card as USB storage.
Click to expand...
Click to collapse
wut?
ilikeyoumore said:
Done, nothing much happened. when i open HTC sync it says disconnected and i cannot find my phone for phone monitor options, nor sync (it's plugged in).
Click to expand...
Click to collapse
If you're trying to actually use HTC Sync to sync (not just for the drivers), you have to be running a stock ROM like xtrSENSE, xtrROM or others. Or a Sense-based Froyo ROM, but those aren't really ready for day to day use yet.
Then when you plug your phone in you get three options instead of two:
1. Charge only
2. Mount USB
3. HTC Sync
And it has to be in HTC Sync mode for the HTC Sync program to see it.
Yes the notification method. I use the same method to dismount it. I have KaosFroyo v38 ROM.
Click to expand...
Click to collapse
Have you tried rebooting both the phone and the computer (with the phone disconnected)? Only reconnect it after both are fully loaded.
wut?
Click to expand...
Click to collapse
In other words, with some ROMs when I plug my phone into my USB cable on my computer, the computer immediately shows a drive letter for it. It won't be accessible, though, until I choose the mount USB option on the phone.
There are other alternatives for mounting the SD card through USB, maybe you should try them.
There's a widget on the market that isn't free called Dual Mount SD. Personally I use it, it allows mounting the SD card without dismounting it from the phone. Given the problems you're having, though, perhaps this wouldn't work for you either.
There's a free program called QtADB you can find a link to in a thread on here. Google for QtADB XDA and you'll find it, and it'll link to the website for the program. You can even set it up to do this wirelessly if you have a wireless network/router. When I had real internet (not tethering like now) I tried it and it worked great. It uses something free called Wireless ADB or something like that.
You can do many things with this program, and you have to have the Android SDK installed to use it, but you can see what's on the SD card and copy files to and from it with it.
The only other alternative would be to use a Micro SD card to USB adapter, but then you'd have to turn your phone off every time you want to access you SD card on your computer.
I use DropBox (free) to upload files from my computer and download them to my phone all the time.
I did an NVflash after struggling to load VEGaN 7 for a couple days figuring it was the partition issue that I have read about. Flash went off without a hitch - or so I thought.
I went to flash VEGaN 7 again, but my computer would not recognize connection via USB. Attempted to login to clockwork mod but instead I get message - "booting recovery image".
Thinking a factory reset might somehow free up my USB connection I did a factory reset - now I'm stuck in a bootloop.
So, to review--
I can't connect to PC via USB, Access CWM, or get past the bootloop.
BTW - I noticed while looking for options to connect to USB that it appeared my Internal and external SD cards switched locations after the NV flash. External, although not accessible was 12.9 gig and my internal showed slightly less than 1 gig.
Anyway, is there any hope for my G tab - I have never been so frustrated over such a simple process in my entire life.
sorry looked for a way to move this post to the correct location...
gunnervike said:
I did an NVflash after struggling to load VEGaN 7 for a couple days figuring it was the partition issue that I have read about. Flash went off without a hitch - or so I thought.
I went to flash VEGaN 7 again, but my computer would not recognize connection via USB. Attempted to login to clockwork mod but instead I get message - "booting recovery image".
Thinking a factory reset might somehow free up my USB connection I did a factory reset - now I'm stuck in a bootloop.
So, to review--
I can't connect to PC via USB, Access CWM, or get past the bootloop.
BTW - I noticed while looking for options to connect to USB that it appeared my Internal and external SD cards switched locations after the NV flash. External, although not accessible was 12.9 gig and my internal showed slightly less than 1 gig.
Anyway, is there any hope for my G tab - I have never been so frustrated over such a simple process in my entire life.
Click to expand...
Click to collapse
When you NVFlashed, did you use the version with or without CWM. If you did the version without CWM then that would explain no CWM.
When you say you can't connect to PC are you talking about APX mode (NVflash)?
Go here http://viewsonic-gtablet-for-dummies.webs.com/ and follow the instructions for CODE RED step by step. Make sure download everything via the links on the dummies site to make sure you get the right stuff.
Al
No I used the version with CWM, which is why I was suprised to see the "booting recovery image" and then it just continued to boot. I tried both APX via USB and a typical USB connection after loading --where PC gave error "device not identified".
gunnervike said:
No I used the version with CWM, which is why I was suprised to see the "booting recovery image" and then it just continued to boot. I tried both APX via USB and a typical USB connection after loading --where PC gave error "device not identified".
Click to expand...
Click to collapse
So, just to verify, you hold Vol(-) and press/hold Power, 3 birds appear & screen goes black...that is APX mode. Connect usb cable to PC & what does the PC say?
USB device not recognized -
Still having that problem with USB device not recognized.
However, I have gone to ...for dummies site and reflashed device using the "flash USB driver" to temorarily gain access with USB connection. With NVFlash I Am back to having clockworkMod and working GTab with original software 1.1
Again going to flash rom - but Upon connecting USB i get the message "USB device not recognized" - I have attmpted to mount USB through CWM, but still getting that same error.
gunnervike said:
Still having that problem with USB device not recognized.
However, I have gone to ...for dummies site and reflashed device using the "flash USB driver" to temorarily gain access with USB connection. With NVFlash I Am back to having clockworkMod and working GTab with original software 1.1
Again going to flash rom - but Upon connecting USB i get the message "USB device not recognized" - I have attmpted to mount USB through CWM, but still getting that same error.
Click to expand...
Click to collapse
If your tab boots, you don't have to use CWM/mount & storage to transfer your rom to the internal sd. Put your external in your PC, copy the rom to it, move back to the tab & copy to your internal. There are also other ways to transfer it but we can talk about that later if you like.
If that works you can still flash your rom & then we can work on getting the usb up.
So, the usb not recognized is when you try to connect after your tab is either all booted up or in CWM mount & storage (and not when you are in APX mode doing NVFlash)?
If you look in device manager what does it show?
Try connecting your tab to a differet PC & see it detects it correctly?
If it works on another PC, you may want to tryto use USBDview http://www.nirsoft.net/utils/usb_devices_view.html to look at the USB dvices that are connected or have been connected to your PC. You can find the gTab devices in the list & then use it's command line options (see instructions included with it) to remove(uninstall) them from the PC. Then you can reconnect to see if it will detect & install the driver correctly.
Can't use external load on pc to transfer rom. No card access.
USB did work in apx mode following instructions in code red. I thought of usin another pc and duplicated the failed results there.
Device manager showed yellow exclamation mark and would'n't install any driver I pointed it to (both computers) Unknown USB device.
Btw I want to thank you for trying to help me out on this. You people who lend your knowledge are commendable.
gunnervike said:
Can't use external load on pc to transfer rom. No card access.
USB did work in apx mode following instructions in code red. I thought of usin another pc and duplicated the failed results there.
Device manager showed yellow exclamation mark and would'n't install any driver I pointed it to (both computers) Unknown USB device.
Click to expand...
Click to collapse
OK, try this. We are going to use Mobisynapse to wirelessly transfer files to & from your PC to the tab.
Download mobisynapse from my dropbox http://dl.dropbox.com/u/36150173/Mobisynapse.exe & install on your PC.
From your gTab, download Mobisynapse system tool from my dropbox to your tab & install http://dl.dropbox.com/u/36150173/com.mobisystems.office_registered-1.apk.
Start the app on the tab, click More & select Connect to PC to switch it to ON.
Start the Mobisynapse on your PC, it shoud see your tab, once it sees it click connect.
From there, go to the Files icon & you should see an Explorer type screen. PC on the left, tablet on the right. You can transfer files in either direction. Transfer your Rom files or whatever you want.
Let me know when you have downloaded the apps from my dropbox so I can remove them.
Al
I downloaded them and installed, on tab it shows up as officesuite. When I run it "more" is not an option. On pc it simply says (can not connect to android device) under "choose devices". I did turn on USB debugging on tab.
gunnervike said:
I downloaded them and installed, on tab it shows up as officesuite. When I run it "more" is not an option. On pc it simply says (can not connect to android device) under "choose devices". I did turn on USB debugging on tab.
Click to expand...
Click to collapse
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
aabbondanza said:
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
Click to expand...
Click to collapse
Here's the correct on for the tab app:
http://dl.dropbox.com/u/36150173/Mobisynapse%20system%20tool_1.3.apk
aabbondanza said:
Opp! Put the wrong one there. Give me a few & I'll put the correct on there.
Click to expand...
Click to collapse
Ok, there we go. Gimme a few
Do I need to create a "roms" folder, and is it supposed to be the zip folder or the files within the zip folder?
gunnervike said:
Do I need to create a "roms" folder, and is it supposed to be the zip folder or the files within the zip folder?
Click to expand...
Click to collapse
It's easier that way, that way you can easily differntiate it from other files/folders. If you create the folder, then put the zipped rom inside the folder.
I turned connect to pc on. Running mobisynapse on pc it sees the tab just fine. I click connect and it pulls up info about tab, BUT when I go to files tab --- right side of screen is greyed out. It won't transfer files.
gunnervike said:
I turned connect to pc on. Running mobisynapse on pc it sees the tab just fine. I click connect and it pulls up info about tab, BUT when I go to files tab --- right side of screen is greyed out. It won't transfer files.
Click to expand...
Click to collapse
Third icon from the left...looks like a little file cabinet.
lol, yeah 3rd from left...
It seems to connect just fine, but under the file tab I can only see files from the PC on the left - the right side doesn't show any files and all buttons are greyed out. Again, under the home tab I have access to the GTab just fine. I can see apps, contacts, etc. but under file tab - no files on right side and buttons are not accessable.
So do you see the left (PC side)? Is the right side populated at all & what is in the drop down folder box (should be /sdcard)!
So, last night i tried to flash GtabComb to my 1.1 Gtab. After 3 unsuccessful installs (which I now believe are attributed to the system partition size of only 200 rather than 250 [help here would also be apprciated]) i downloaded the latest Rom Manager and updated ClockWork Mod. After the initial scare that my SD card had been totally formatted, i found that for some reason, this new CWM likes to use the second SD card... You know, the one with no backups or anything saved to it. For now, I am running a random ROM (Vegan Gingerbread) until i find out how to switch the SD card read by CMW. So any help guys? It's probably something really simple I'm over looking.. Help is appreciated greatly. Thanks
Edit: On a side note, I finally got GtabComb to load on my tablet! Seems I only needed a little bit of patience...
theshafe said:
So, last night i tried to flash GtabComb to my 1.1 Gtab. After 3 unsuccessful installs (which I now believe are attributed to the system partition size of only 200 rather than 250 [help here would also be apprciated]) i downloaded the latest Rom Manager and updated ClockWork Mod. After the initial scare that my SD card had been totally formatted, i found that for some reason, this new CWM likes to use the second SD card... You know, the one with no backups or anything saved to it. For now, I am running a random ROM (Vegan Gingerbread) until i find out how to switch the SD card read by CMW. So any help guys? It's probably something really simple I'm over looking.. Help is appreciated greatly. Thanks
Click to expand...
Click to collapse
The best way to install CWM is through NVflash. Rom manager is really designed for phones not this tablet. NVflash is simple and easy to use as long as you have a desktop or laptop using either windows or Linux. Here is the link to guide you through those steps. Helped me out when I was in a jam.
http://viewsonic-gtablet-for-dummies...om/nvflash.htm
Thanks for the advice! NVFlashing is a tad of a problem for me, however. I've actually commented on that particualr NVFlashing tutorial earlier today explaining how my computer won't recognize my tablet while it's in APX mode. I seem to have the worst luck with this kid of thing..
Would there another way to change which card is being read?
Do not use Rom Manager on the Gtablet it will mess things up. You can go to this link and download a .zip installable version of CWM for your bootloader. There are versions for installing from either the internal or external sdcard. If you are not installing from the external sdcard, it is best to remove it.
You could also check out this thread, and this one for more info.
It sure does mess things up! And that CWM.zip would be great had I not had another (worse) version already installed.. woe is me. I'll give those threads a read tomorrow and hope something turns up. Thanks for the links!
DaggerDave said:
Do not use Rom Manager on the Gtablet it will mess things up. You can go to this link and download a .zip installable version of CWM for your bootloader. There are versions for installing from either the internal or external sdcard. If you are not installing from the external sdcard, it is best to remove it.
You could also check out this thread, and this one for more info.
Click to expand...
Click to collapse
That would be the way to go but if you can't access the current CWM you cannot get it to install anything. The only other alternative would be to figure out why the computer won't recognize the tablet in APX mode. What OS are you trying it with?
Try this:
Download this .zip file and extract it to your Gtablet's sdcard.
Using a root file manager (ES, Root Explorer, etc.) mount /system as read-write (rw) and move the downloaded files in each folder to their proper locations (copy the system/etc/recovery folder into /system/etc and the files in system/bin into /system/bin) and make sure all the permissions are correct. The recovery images should be -rw-r--r--, the scripts inside of /bin should be -rwxr-xr-x and flash_image should be -rw-r--r--.
Open a terminal emulator and type 'su' (without quotes) and allow SuperUser when it asks. Your shell prompt should go from a '$' to a '#'. Now type 'cwmrecovery.sh' (without quotes) and enter. That should install cwm-08 for you, just exit when it finishes and try to reboot into recovery. You can use the 'fixrecovery.sh' script to flash the stock 1.1 recovery if you ever need to.
See the last thread I linked to in my last post for more info on this. Good luck!
DaggerDave said:
Try this:
Download this .zip file and extract it to your Gtablet's sdcard.
See the last thread I linked to in my last post for more info on this. Good luck!
Click to expand...
Click to collapse
Just extracted to the external SD that was being read from and updated from there with the new CWM and bam! .08 is on and working like a charm. Many thanks!
nobe1976 said:
Another alternative would be to figure out why the computer won't recognize the tablet in APX mode. What OS are you trying it with?
Click to expand...
Click to collapse
I would love to know why it doesn't. I was previously using a froyo tap'n'tap, but now I am running 3.0.1. Would OS make a difference? I always assumed it was my tablet/PC's/luck
I would love to know why it doesn't. I was previously using a froyo tap'n'tap, but now I am running 3.0.1. Would OS make a difference? I always assumed it was my tablet/PC's/luck[/QUOTE]
The OS on the tablet doesn't matter since the APX mode is the tablets download mode. The OS on you computer is what might be the issue, or could even be just a bad USB port or even drivers being used. If the computer keeps promptings that software needs to be installed. Guied the it to install them from the extracted NVflash file and install the ones that are in the pack.
I would love to know why it doesn't. I was previously using a froyo tap'n'tap, but now I am running 3.0.1. Would OS make a difference? I always assumed it was my tablet/PC's/luck
Click to expand...
Click to collapse
As the post above said, the OS on your PC is probably your problem. Which OS are you using? WinXP, Win7? I can't for the life of me get Windows7 to recognize my ICS Gtablet but o'well!
If you are comfortable with using or trying Linux, you could try installing Knoppix on a USB drive and run that. I think Knoppix has everything set up for MTP & ADB already and is 'live' so no real configuration is needed to get it running (except for your wifi of course). Just use the Linux version included in most NvFlash packages. If you have a fairly powerful computer, you could also try running Linux in a VM, but Knoppix doesn't run in a VM very well.
My favorite is Arch Linux (not in a VM). Although you have to build and configure the system yourself from the ground up. Since I started using Linux I have really enjoyed it. It is much faster than Windows, more secure and gives me less problems than the Win PCs I deal with. Check out this site if you are interested in Linux.
DaggerDave said:
As the post above said, the OS on your PC is probably your problem. Which OS are you using? WinXP, Win7? I can't for the life of me get Windows7 to recognize my ICS Gtablet but o'well!
If you are comfortable with using or trying Linux, you could try installing Knoppix on a USB drive and run that. I think Knoppix has everything set up for MTP & ADB already and is 'live' so no real configuration is needed to get it running (except for your wifi of course). Just use the Linux version included in most NvFlash packages. If you have a fairly powerful computer, you could also try running Linux in a VM, but Knoppix doesn't run in a VM very well.
My favorite is Arch Linux (not in a VM). Although you have to build and configure the system yourself from the ground up. Since I started using Linux I have really enjoyed it. It is much faster than Windows, more secure and gives me less problems than the Win PCs I deal with. Check out this site if you are interested in Linux.
Click to expand...
Click to collapse
To top on this excellent information. If you decided to try a Linux disto I would recommend a version of Ubuntu, doesn't really matter which one they are all really user friendly and depending on you pc setup depends on which version of it you can use. I have 11.05 installed on a 2nd partition for doing my Droid stuff on a computer that is around 9 years old, runs smooth. Windows xp is the other alternative which I have used several times NVflashing stuff, but adb seems to run better through Linux in my opinion.
Ah, mind went blank there. Right now, all I have is a windows 7 laptop (my XP desktop and older Vista laptop are probably long gone) Ive attempted to flash before with the vista laptop to no avail. In both instances, I connect the tablet in APX and it was not even recognized as a connected device. I'm hesitant to run Linux, even from a flash drive. If I get the chance to soon, I may very well end up doing it, as it appears the ONLY option.. Thanks for your help guys. If you could think of anyway for Windows 7 to recognize my tablet, please let me know. You guys are a great help. Thanks again!
If you haven't already tried this maybe it will work for you.
- Put the tablet into APX mode, then plug in the USB. Windows7 will drag on then fail installing the drivers, as usual.
- Go to Control Panel->Hardware and Sound->Device Manager and find the '!' (unknown device)
- Right click and choose Properties, then Uninstall Driver (if it is an option)
- Next, click on Update Driver, then choose Browse My Computer ...
- Navigate to the NVFlash folder (the one you extracted from the nvflash .zip you downloaded)
- Open the folder inside called 'usbpcdriver' or similar, and select the .inf file (NvidiaUsb.inf) and choose to install it. Once it installs, it should recognize the tablet as a MTP device. If not turn off the tablet, unplug the USB, restart Windows and plug it back in when it is finished rebooting and start the tablet in APX mode again. If it still doesn't recognize it try the whole process over agian.
I can understand being hesitant toward running Linux but running from a flash drive or in a VM is pretty safe, as in if you mess up the OS you can always start over without damaging Windows. Done it many times! Try running Ubuntu in a virtual machine such as Virtual Box, it is almost as user friendly as windows and you can have the VM capture USB devices such as the Gtablet which Ubuntu should recognize. Probably won't run very fast on a laptop but if you have at least a dual core with 2 GB of ram it should be pretty smooth.
Not trying to push Linux on you or anything, just some suggestions. From what I hear most of the Gtab devs use Windows7 and it seems to work great for them!
The situation is this: at work the computers are heavily locked down. By that I mean that you can not download and install anything, no cd rom access and no usb access. they run win xp (some of you may be too young to have heard of this)
I have recently discovered, however, that when i plug my galaxy s3 in, the pc sees it as a digital camera, and i can access every folder on the internal sd card through windows explorer. i can then transfer any file i like to the computer
This never happened on my g note, nexus s, or any other device.
Now, I can only confirm that the above works on xpower 2.5 ics custom rom. when I changed to hypergalaxy jb rom, there was no access to my phone via the pc.
Can anyone help me to understand how and why this works, and how i might use a hack to enable any usb device on such a locked down pc?
Sent from my GT-I9300 using xda app-developers app
dannstarr said:
The situation is this: at work the computers are heavily locked down. By that I mean that you can not download and install anything, no cd rom access and no usb access. they run win xp (some of you may be too young to have heard of this)
And how i might use a hack to enable any usb device on such a locked down pc?
Click to expand...
Click to collapse
No since they are work computers and are supposed to be locked down attempting to hack them will just get you fired since the IT department will be watching everything or notice it the next time they need to do work on that computer so if you value your job don't attempt this.
dannstarr said:
I have recently discovered, however, that when i plug my galaxy s3 in, the pc sees it as a digital camera, and i can access every folder on the internal sd card through windows explorer. i can then transfer any file i like to the computer
This never happened on my g note, nexus s, or any other device.
Now, I can only confirm that the above works on xpower 2.5 ics custom rom. when I changed to hypergalaxy jb rom, there was no access to my phone via the pc can anyone help me to understand how and why this works.
Click to expand...
Click to collapse
Some devices just need their own drivers installed before they can connect as normal USB/MTP storage devices.