Hi
I am having some issues with my Xperia Z2 D6502. I am new to rooting, so please bear with me.
I rooted my device following these instructions. All things went smoothly. However next day I started having problems to boot into recovery mode. I have explained my problem here. I tried reinstalling Z2-lockeddualrecovery2.7.154-BETA.installer which I got from the above instructions. It installed successfully but still I couldnt boot into recovery mode. The phone even stopped detecting my SD card, I had to reinsert it each time I would reboot to make it work.
So I followed all the instructions from the scratch again except for the last one which involved flashing pre rooted 5.1.1 stock ROM(flashable_D6502_23.4.A.0.546.zip). I wanted to keep rooted kitkat 4.4.2(I initially,i ..e., before rooting, had 5.1.1 but according to the instructions I had to downgrade it to kitkat) which I obtained as a result of downgrading my Xperia Z2 from 5.1.1.
Now I am facing wifi problems with kitkat. I can connect to the network but internet works extremely slow while it works absolutely fine on other devices. I dont have access to the router as its a common router in my dorm. I tried several solutions which I found on internet involving changing DNS to 8.8.8.8 and changing IP settings to static. None of them had any effect. Is there anything else I could do to resolve this issue?
The main reason I want to keep kikat is that I want to install Xposed on my device for imei changer and android id changer, and I read somewhere that for installing Xposed on kitkat you dont need to flash any zips and just install it like any other app. I didnt flash it on lollipop because of the warnings about getting stuck in bootloop in sony devices and I wasnt sure of how to flash it as the instructions were not very detailed and I am new to it. So do we flash it the same way I flashed 5.1.1 rom, i.e., booting into recovery mode and then selecting install and then selecting the zip I want to install?
I got this link to working modules on sony devices but I cant find imei changer in the list. So even if I installed Xposed, with your help of course, will I be unable to use imei and android id changer?
I read in several places that I should backup my device so that I can restore to the previous state in case I soft brick it or enter a bootloop. What kind of backup is this and how do I take it?(I googled and found Backup TA to take backup but I am not sure if that is the type of backup I am looking for and the instructions in the page are not detailed enough for me as I cant risk my device.)
I have one request, please provide me with detailed steps as I am doing all of it for the first time and am extremely nervous of screwing up my device as it is my only phone and quite expensive too.
Well, my device is rooted, on 5.1.1, and Xposed Works very well, without bootloops, and all Modules that I tried worked very well, by your description I can't figure out what is causing your problems...
stayawake said:
Well, my device is rooted, on 5.1.1, and Xposed Works very well, without bootloops, and all Modules that I tried worked very well, by your description I can't figure out what is causing your problems...
Click to expand...
Click to collapse
I havent tried Xposed on my device yet. Have you tried imei changer and android id changer? If not can you confirm if it works?
Can you please provide me with detailed step on how to install Xposed?
If my device goes into bootloop, will I be able to flash it using stock ROM?
And can you please provide answers regarding taking backup?
berbatov93 said:
I havent tried Xposed on my device yet. Have you tried imei changer and android id changer? If not can you confirm if it works?
Click to expand...
Click to collapse
I didn't tried these two modules.
berbatov93 said:
Can you please provide me with detailed step on how to install Xposed?
Click to expand...
Click to collapse
following the official topic of the module, you will have all the steps to install it, and the version that most fits with your system version
berbatov93 said:
If my device goes into bootloop, will I be able to flash it using stock ROM?
Click to expand...
Click to collapse
If you got a boot loop, you can:
1: Force power off the device by holding volume+ and power button simultaneously, then, you will able to flash via flashtool a new ROM
2: if you have a custom recovery, you can follow the same method to power off, then, power on and access the recovery, where you will be able to flash a zip containing a new system, etc.
berbatov93 said:
And can you please provide answers regarding taking backup?
Click to expand...
Click to collapse
Well, again, using a custom recovery you can make a Backup, the interface is very intuitive and easy to understand.
stayawake said:
I didn't tried these two modules.
Click to expand...
Click to collapse
Can you please try them?
If you got a boot loop, you can:
1: Force power off the device by holding volume+ and power button simultaneously, then, you will able to flash via flashtool a new ROM
2: if you have a custom recovery, you can follow the same method to power off, then, power on and access the recovery, where you will be able to flash a zip containing a new system, etc.
Well, again, using a custom recovery you can make a Backup, the interface is very intuitive and easy to understand.
Click to expand...
Click to collapse
Do we make custom recovery using the backup option we get when we boot into recovery menu?
And how to enter recovery menu without booting into the system? I access it using NDR utils app.
And do I need to flash any recovery zip from the recovery menu if I want to keep it?
berbatov93 said:
Can you please try them?
Do we make custom recovery using the backup option we get when we boot into recovery menu?
And how to enter recovery menu without booting into the system? I access it using NDR utils app.
And do I need to flash any recovery zip from the recovery menu if I want to keep it?
Click to expand...
Click to collapse
If you have Dual recovery, you are already running a custom recovery.
to enter the recovery menu whitout boot the system, you should:
Power On the device, and at the FIRST SONY screen, when the LED flashes, press volume up to enter TWRP
stayawake said:
If you have Dual recovery, you are already running a custom recovery.
to enter the recovery menu whitout boot the system, you should:
Power On the device, and at the FIRST SONY screen, when the LED flashes, press volume up to enter TWRP
Click to expand...
Click to collapse
Volume down for TWRP, volume up goes to the other one, CWM I think? I've never looked!
@berbatov93 you need a bit more patience and to read more things. Forums are awesome because you can get help from people all over the world but it rarely happens in real time.
stayawake said:
If you have Dual recovery, you are already running a custom recovery.
to enter the recovery menu whitout boot the system, you should:
Power On the device, and at the FIRST SONY screen, when the LED flashes, press volume up to enter TWRP
Click to expand...
Click to collapse
Its doesnt enogh to tap once volume up to enter to recovery ,when Sony logo shows he must tap few times volume up until notification led get purple color and phone goes in to recovery.This is procedure for Philzz Touch Recovery.
may i ask you something..did you unmount your memory card before you take it out?
if you want to have lastest version lolipop with root..
downgrade your phone to android lolipop 5.0.1..then follow this step http://forum.xda-developers.com/xperia-z1/general/root-xperia-running-lollipop-lb-ubl-t3123893..
then..
1. install busybox
2. turn on usb debugging and unknown source
3. find lolipop lastest version preroot...copy to your memory card (make sure to unmount it before you put it out) or just put the usb cable
4. install recovery (make sure to get lastest recovery.. can get it on nut.xperia-files.com/)
5. enter recovery then flash lastest pre root lolipop..
6. turn on your phone...
7.Good Luck
TA Partition Backup is for who want to unlock bootloader.. it backup DRM key which important for waranty.
Thank You, i hope this will help you
NamiDragneel said:
may i ask you something..did you unmount your memory card before you take it out?
if you want to have lastest version lolipop with root..
downgrade your phone to android lolipop 5.0.1..then follow this step http://forum.xda-developers.com/xperia-z1/general/root-xperia-running-lollipop-lb-ubl-t3123893..
then..
1. install busybox
2. turn on usb debugging and unknown source
3. find lolipop lastest version preroot...copy to your memory card (make sure to unmount it before you put it out) or just put the usb cable
4. install recovery (make sure to get lastest recovery.. can get it on nut.xperia-files.com/)
5. enter recovery then flash lastest pre root lolipop..
6. turn on your phone...
7.Good Luck
TA Partition Backup is for who want to unlock bootloader.. it backup DRM key which important for waranty.
Thank You, i hope this will help you
Click to expand...
Click to collapse
The DRM keys are unlikely to affect your warranty claim but they do other things including allowing your device to get OTA upgrades.
To unlock your bootloader you have to get an unlock code from Sony, to do that you give them your device details. So if you send it back for warranty and they look it up, I have no idea if they do, they'll see that you have unlocked your bootloader. Or at least got the code to do so, I doubt anyone gets the code without planing on using it.
Those DRM keys play a role in the Sony image processing for both the camera and the Bravia Engine. That is what you lose by unlocking the bootloader, warranty is not the major factor.
Hey
I had the same problem.
So what I did to solve this?
I did a factory reset > flash again flashable_D6502_23.4.A.0.546.zip > wipe dalvik >
And the problem was fixed.
Good luck
Related
Hello there, I own a Moto E, Bought from the Indian supermart, Flipkart. I recently came across an LG G2 that runs on Cyanogen Mode 12. That shows the android version of 5.0.2. I then looked deeper and found that my.moto E can be rooted to the same ( or 12.1) OS alwell. So, I would like to root my device and install the mode. I. Kindly request you to provide me with the steps to safely root the device. I'm a newbie to android development and mods. So, please tell me things in the most basic level.
Thank you.
Shon
Firstly you'll have to note that rooting will void your warranty and you might end up bricking your phone (Though it usually doesn't happen while rooting)
Secondly... you should first search for your question in the forum itself since you're not the first person to encounter the problem...
Okay .. now to the rooting part...
To root your moto e..
You'll first have to unlock your bootloader which would result in deletion of all the data you have in your internal storage so you should backup your data first...
Go to this thread for the entire process of unlocking bootloader: http://forum.xda-developers.com/showthread.php?t=2753110
Next you'd want to flash a custom recovery. There are many custom recoveries out there.. most popular being cwm and twrp.. You can go for any recovery you like
In most cases.. the process to flash recovery is the same...
1. Download the particular recovery that you want to flash and rename it recovery.img... also note that while downloading... you check that it's for your device only...
2. Put it in the same folder as that of minimal adb and fastboot which i assume you downloaded while unlocking your bootloader
3. Enable USB Debugging in your phone from the Developer's options which can be unlocked by tapping on "Build number" a few times in About phone
4. Connect your phone to your pc with a USB cable
5. Open Minimal adb and fastboot
6. Type the following command 'fastboot flash recovery recovery.img' without apostrophes
If it says Ok.. then you have successfully flashed your custom recovery
Now you're finally gonna root your phone...
1. Download SuperSU from here https://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip (DO NOT UNZIP)
2. Switch off your phone and reboot into bootloader by pressing first volume down.. then power button.. then releasing power button
3. Navigate to recovery by volume buttons and press power button to select
4. Select install or install from sd or something similar depending upon the recovery that you flashed
5. Select the super su zip file that you downloaded in first step
6. Flash it
7. Reboot
That's it.. your moto e is rooted now...
And like i said before... use the search bar before posting a question
(Press Thanks if i helped somewhow )
Firstly, Thank you for your valuable reply. I'd like to know a few more things about the process.. In this case, I'd like to set up cyanogen mode 12 on my XT1022. So after having my device rooted, what do I have to do? Do i have to download the ROM from the official cyanogen website? If so, can you please post a link to that file too?
And about the OS, I'd like to know,
*Will I be able to use both my sim cards? If not which sim card will I lose functionality?
*Will I be able to use Data ie, Edge and HSDPA through my sim card?
*Will I be able to use WiFi and Bluetooth?
*How will I Flash my original ROM back if I need?
Thank you for being patient.
lollipopmadman said:
Firstly, Thank you for your valuable reply. I'd like to know a few more things about the process.. In this case, I'd like to set up cyanogen mode 12 on my XT1022. So after having my device rooted, what do I have to do? Do i have to download the ROM from the official cyanogen website? If so, can you please post a link to that file too?
And about the OS, I'd like to know,
*Will I be able to use both my sim cards? If not which sim card will I lose functionality?
*Will I be able to use Data ie, Edge and HSDPA through my sim card?
*Will I be able to use WiFi and Bluetooth?
*How will I Flash my original ROM back if I need?
Thank you for being patient.
Click to expand...
Click to collapse
Sorry for the late reply.. I know you probably would've flashed it by now and trying out new different roms as well but i'd still post in case somebody stumbled upon this thread...
Yes you'd have to download the rom from the official cyanogenmod website
https://download.cyanogenmod.org/?device=condor&type=nightly
After downloading it.... Go into your recovery... Do a factory reset (It will delete all your data so backup your rom before doing so) .. Then install the rom and reboot... First reboot will take a lot of time so no need to worry if it doesn't boot up quickly...
Now to answer your questions...
Yes.. Everything is working fine with cm12 and i haven't really seen any big bugs or anything that would bother you since i myself am using it as a daily driver...
If you made a backup before installing the rom.. All you'd have to do would restore it and you'll go back into the same state with the previous rom installed... And if you didn't.. You'd have to install the stock firmware for which you can take help from this thread
http://forum.xda-developers.com/showthread.php?t=2759495
Installing the new Sony Bootloader and Recovery
THIS IS FOR ALREADY UNLOCKED DEVICES!
DO NOT TRY THIS ON A GPE!Since a lot of people seem to have problems keeping their recovery when flashing Lollipop-ROMs i decided to put up this little guide...
You can also Skip this whole guide, by just flashing the newest stock-FW at least once!
First off, as already said, this is for already unlocked devices. You can use this Guide until "Install Custom ROM", except the rooting part, for rooting use this, if you haven't already!
Don't do it if you don't atleast somewhat know what you are doing.
I am not responsible for bricked devices, or whatever you might end up with.
So, lets get started.
1. Download Sonys FlashTool "EMMA" and install it: http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/
In the .zip file from the FlashTool you'll find a File "customization.ini"
Copy this file to the installation directory of EMMA, usually "C:\Program Files (x86)\Sony Mobile\Emma"
If you don't copy that file, Emma will ask you for a login, don't create an account there, you will NEVER get any activation-email!
2. Open EMMA and boot your Phone into FlashMode (Power off your device -> Press and hold volume DOWN -> while pressing volume DOWN insert USB-Cable)
3. Emma should now recognize your device, but you have to select it manually tough. Select your EXACT model number. Again, I am not responsible for any bricked devices or whatever you end up with!
Now select the "(Open Devices) TA update" and click "Apply Service"
It should take a few seconds and should then display SUCCESS.
You can now close Emma
4. If you haven't already download FastBoot and Drivers: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
(Run as Administrator!)
5. Download the newest version of twrp and put it somewhere:
New Inoffcial twrp-3.0.0 build by me: http://forum.xda-developers.com/xperia-z-ultra/development/togari-twrp-recovery-3-0-0-t3314440
Old official versions: https://twrp.me/devices/sonyxperiazultra.html
6. Finally boot up you Phone in FastBoot-mode (Power off -> press and hold volume UP -> while pressing wolume UP insert USB-Cable
Your LED should now light up blue
Shift+Rightklick in the Folder where you have put TWRP recovery, and select "Open Commandprompt here"
Now write "fastboot flash recovery FILENAME_OF_TWRP_FILE"
You can now unplug your USB-Cable and boot into recovery and continue from there.
Your recovery will be permanent, meaning you won't loose it or replace with any other recovery that might come with your ROM.
I hope this was somewhat helpfull
Any one can flash this to C6806?
jacklau2000 said:
Any one can flash this to C6806?
Click to expand...
Click to collapse
You can try, just select your modelnumber in emma
If the "Open Devices (TA Update)" show up, you're fine. If not just don't do anything.
But do not try this on a GPE!
alia5 said:
You can try, just select your modelnumber in emma
If the "Open Devices (TA Update)" show up, you're fine. If not just don't do anything.
But do not try this on a GPE!
Click to expand...
Click to collapse
tried, but no luck. thanks.
It's really weird, I used emma, and installed their latest ta update. Now I can get into fastboot mode, all commands execute successfully, but the recovery never takes. The vol down + Power doesn't work, nor does 'adb reboot recovery'. Am I missing a step somewhere? This isn't my first android device, but from where I sit, it seems like something is up with my xzu.
If I try and install the 14.4* update through emma, it goes through the whole process, completes "successfully", then boots into 14.5. Something is clearly not working here.
The TA update only unlocks the ability to boot to recovery, it doesn't install one. And no, flashing official TWRP to recovery partition doesn't work, it must be compiled again to work on normal recovery partition and not in FOTAKernel, where it must be flashed to work.
Regards
teddy74eva said:
The TA update only unlocks the ability to boot to recovery, it doesn't install one. And no, flashing official TWRP to recovery partition doesn't work, it must be compiled again to work on normal recovery partition and not in FOTAKernel, where it must be flashed to work.
Regards
Click to expand...
Click to collapse
I´m on CM 11 M12 (looking forward to 12) + the new sony bootloader without any custom Kernel stuff.
Sadly, you are right. It´s not done with downloading twrp-2.8.5.0-togari.img and fastboot flash recovery yourfile.img.
The last offical TWRP release for Xperia Z Ultra is from february 2015, any chance they release an updated version for the new Sony bootloader?
Hermann1222 said:
I´m on CM 11 M12 (looking forward to 12) + the new sony bootloader without any custom Kernel stuff.
Sadly, you are right. It´s not done with downloading twrp-2.8.5.0-togari.img and fastboot flash recovery yourfile.img.
The last offical TWRP release for Xperia Z Ultra is from february 2015, any chance they release an updated version for the new Sony bootloader?
Click to expand...
Click to collapse
I will try to compile one because, you know, summer holidays and no school however I don't know if I will make it.
Regards
Is there any (wish for TWRP) recovery for togari, which use the new bootoader?
FYI:
My device is a brazilian c6843.
Emma recognizes the device automatically and indicates with an exclamation point that there is no services available to the unit.
In the case someone doesn't know, it's basically the c6833 with DTV 1seg. It's totally compatible with c6833 firmware, losing TV, of course.
You sir are the real hero! Thank you!
I have a xzu running cm12.1, and I have 2 quick questions for those with more knowledge than me
Is it possible to flash the new bootloder using the open source FlashTool?
If I have to use emma, is it possible to just apply the open device ta update *without* installing stock firmware first?
pbgapski said:
If I have to use emma, is it possible to just apply the open device ta update *without* installing stock firmware first?
Click to expand...
Click to collapse
You can totally do that, BUT, the newest stock firmware also has some firmware updates regarding nfc, also having the newest stock rom flashed at least once will be kind of a requirement to get everything properly working on marshmallow roms.
So I would say flash the newest stock rom at least once!
missing clues on new recovery partition
alia5 said:
You can totally do that, BUT, the newest stock firmware also has some firmware updates regarding nfc, also having the newest stock rom flashed at least once will be kind of a requirement to get everything properly working on marshmallow roms.
So I would say flash the newest stock rom at least once!
Click to expand...
Click to collapse
I followed your advice, but it seems I am missing a few clues.
My sirius was on cm12.1. I backedup and flashed D6543_23.4.A.1.232_1281-5466_R6C.ftf with flashtool on linux. I tried to use emma (several times) afterwards to check for any TA updates, but all I got was "no services matched this device" or something like that. Google tells me I am not the only one with this issue with emma
Then I used fastboot to install twrp 3 from twrp.me to recovery partition, but I could not access twrp.
I fastbooted recovery again with twrp 2.8.7, and this time I could enter twrp and reflashed CM.
Now I can access twrp using the button combinations while booting, but rebooting to recovery from CM leads to a bootloop. Has anyone experienced this as well?
So it seems I am still missing a few clues to using the recovery partition. Is any build of twrp supposed to work on both FOTAkernel and recovery partitions?
Is there a TWRP 3 build that works from 'coldboot to recovery' and 'cm reboot to recovery' with the new bootloader? Any pointers?
pbgapski said:
Now I can access twrp using the button combinations while booting, but rebooting to recovery from CM leads to a bootloop. Has anyone experienced this as well?
So it seems I am still missing a few clues to using the recovery partition. Is any build of twrp supposed to work on both FOTAkernel and recovery partitions?
Is there a TWRP 3 build that works from 'coldboot to recovery' and 'cm reboot to recovery' with the new bootloader? Any pointers?
Click to expand...
Click to collapse
Well, booting to recovery on separate partition from os, requires the rom to have a patch... the "new" mm-roms (when they finally hit aka. are ready to be shared in public) will have that, so no worry, just wait.
why it said my phone have no available service, i am on c6833
alia5 said:
Well, booting to recovery on separate partition from os, requires the rom to have a patch... the "new" mm-roms (when they finally hit aka. are ready to be shared in public) will have that, so no worry, just wait.
Click to expand...
Click to collapse
I have the same problem but not bootloop just stuck at starting apps screen,BTW did you have a TWRP scripts for flashing TWRP 3.0 into FOTAkernel
hi .. after this update can i relock my phone and restore drm functions?! or phone go to unlocked forever?!
pls help i need answer
erfanzz said:
pls help i need answer
Click to expand...
Click to collapse
Search the forums on how to backup TA partitions. I have mine but never tried to restore them
Rooting and romming Sony devices is a little harder than most android devices, some things work a little different. The scattered info doesn't make this any easier either. I had to find this out the hard way, softbricked my Xperia in the process, but I finally did it. I see that there still are people that wish to root stock 5.1.1 and that there are no unified proper instructions to do this so here is my process and guide. Good luck.
There are many ways to do this, but it includes flashing your Xperia to earlier firmware then rooting and installing the recovery and then flashing back the newest firmware, so I made this little guide to make things easier for Sony newcomers. This process should be compatible with Z1, Z2 and Z3(c) - but ofcourse its made for Z2, for Z1 and Z3 download recovery files for your model respectively.
You won't loose any of your data on your stock ROM if you do this correctly.
You'll need a Windows PC, 7, 8.1, 10. (Mac and Linux are also supported)
1. Root your Z with Kingroot.apk v4.6 and v4.8 work flawlessly. Just download and install as normal apk and hit the big blue button. You have to have internet connection for this to work. It will root your Z automatically after cca. 2m.
Kingroot app is basically a super su app from a different developer. Congrats, you now have root.
2. To install a recovery do not use any flashing apps by TWRP or similar, it wont work. We will use XDZR.
XZDR is Xperia Z Dual Recovery, its basically Philz recovery and TWRP recovery flashed together. You enter Philz holding vol up and TWRP holding vol down when powering up your xperia. * Search for NUT's dual recovery for more info.
Download the recovery from here:
http://nut.xperia-files.com/path/XZDualRecovery
(Download the correct .zip for your Xperia model).
3. Download the. zip to your PC.
4. Connect your phone via USB after you have enabled USB debugging on your xperia. If you have correct Sony drivers installed your PC will recognize your device and a dialog will pop up on your phone (about allowing USB debugging from this PC). Allow the access.
5. Unpack the zip you downloaded to a random folder on your PC. Here run the install.bat if you're on a Win PC. Bat will run and here you just choose the first option, type 1 and follow the on screen instructions, keep an eye on your phone, it will pop up a couple of yes - no dialogs. Allow the access and ADB access and wait, it will be fast.
When you reboot you will see a green LED light up while SONY splash is shown, this is when you hold up or down for one of the two recoveries.
Down is for TWRP and up is for Philz.
6. Download superSU from here:
https://download.chainfire.eu/696/SuperSU/
Boot to system again and now you can unroot your phone trough Kingroot app (general settings) and then reboot to recovery again and flash the file from this link, you will get the super su app and super su binaries and this way you're fully rooted and will have dual recovery for your full flashing pleasure.
* Remember that you first need to unroot and uninstall Kingroot app and then flash Super su, otherwise you risk a bootloop or just not functional root access.
* Do not flash newer TWRP or any recovery or youll loose your recovery.
* I am not responsible if something goes wrong with your device.
And thats it, you have your data intact, stock 5.1.1 ROM, fully functional root access with super su and two recoveries, intact BL and DRM keys and you can flash almost anything that supports LB (locked bootloader).
Hey.
I have a few questions.
Does installing recovery void the warranty? Can the XZDualRecovery be uninstalled easily? Can I still update to Marshmallow via official update when it comes out when I have recovery installed on my phone?
Thanks!
cha0zine said:
Hey.
I have a few questions.
Does installing recovery void the warranty? Can the XZDualRecovery be uninstalled easily? Can I still update to Marshmallow via official update when it comes out when I have recovery installed on my phone?
Thanks!
Click to expand...
Click to collapse
I think that Sony does void warranty if you do an "unauthorized software changes" and changing software in any other way than trough OTA is unauthorized by Sony, so yes. But you can completely restore your device to factory state by flashing an official FTF image trough flashtool and restore Sonys recovery and basically get your warranty back.
If you follow the above steps installation of XZDR is quite easy and fast.
You will be able to update to official MM by flashing MM FTF image trough flashtool and restore your phone to "official" software state. But with XZD recovery you will be able to flash leaked MM from beta program even sooner and easier.
This guide does not unlock your BL and does nothing irreversible to your phone * providing you do everything correctly.
Thanks for answering! Much appreciated!
can you back up the drm keys through this method?
jeebarbas said:
can you back up the drm keys through this method?
Click to expand...
Click to collapse
Rooting with this method wont unlock your boot loader so there is no need for that, your DRM keys wont be touched.
5ageman said:
Rooting with this method wont unlock your boot loader so there is no need for that, your DRM keys wont be touched.
Click to expand...
Click to collapse
Thank you for replying. sorry, im such a noob but after flashing su and subinaries do i need to update the su binaries or i could jsut leave it as it is?
jeebarbas said:
Thank you for replying. sorry, im such a noob but after flashing su and subinaries do i need to update the su binaries or i could jsut leave it as it is?
Click to expand...
Click to collapse
You can leave it as is, you will have full root functionality. Of course you can also update binaries to have up to date bug fixes and security patches, update trough normal method works fine.
@5ageman Hi. Thanks for the tutorial. I m a noob in this rooting stuff. Last night i rooted my phone Xperia Z2 5.1.1 using kingroot bcos i was scared of rooting with some other steps and bricking my phone. But then i realized that xposed wont install unless i have custom recovery. But i m quiet confused with few things related to root even after reading so many posts. So just need to know what exactly recovery is. Like when i restart my phone and then press vol up or down key what will exactly happen? Is this something like safe mode and some other mode in laptops??
talkativetaurus said:
@5ageman Hi. Thanks for the tutorial. I m a noob in this rooting stuff. Last night i rooted my phone Xperia Z2 5.1.1 using kingroot bcos i was scared of rooting with some other steps and bricking my phone. But then i realized that xposed wont install unless i have custom recovery. But i m quiet confused with few things related to root even after reading so many posts. So just need to know what exactly recovery is. Like when i restart my phone and then press vol up or down key what will exactly happen? Is this something like safe mode and some other mode in laptops??
Click to expand...
Click to collapse
Recovery is actually closest to BIOS in PC terms although its much more. Xperia Z2 has no recovery by default, you'll need to flash it manually. See step 2. And only then you can eter recovery. By pressing vol down when the green LED lights up you will enter TWRP a custom recovery made by Team Win Recovery Project. Nothing will happen if you do nothig, you wont accidentaly wipe or brick your Z2. If unsure what to do next just tap the reboot button and then system to reboot to system as nothing happened. Go step by step, no hurry.
@5ageman thanks alot for ur answer. Now my doubt is clear.
But i have few more questions related to ur tut.
1- i have already rebooted my phone a number of times after rooting it. Like for some other purpose and not for recovery or super su. So will the tut work for me as i read somewhere that one need not restart the phone after rooting using kingroot and install recovery directly. Or if it was for some other device i dont remember.
2 - According to the end of step 5 and step 6, does that mean that i have to download super su from chainfire while i m still in recovery mode? And once agn in the system after uninstalling kingroot and rebooting in recovery do i have to install SuperSU in the recovery mode? If yes then how?
3- last question. Entering recovery is just vol down button or power + vol down both.
Once again sorry for such basic questions but i m completely new in the world of rooting plus i want to make sure i know what i m doing.
Thanks for ur patience. Appreciate.
talkativetaurus said:
@5ageman thanks alot for ur answer. Now my doubt is clear.
But i have few more questions related to ur tut.
1- i have already rebooted my phone a number of times after rooting it. Like for some other purpose and not for recovery or super su. So will the tut work for me as i read somewhere that one need not restart the phone after rooting using kingroot and install recovery directly. Or if it was for some other device i dont remember.
2 - According to the end of step 5 and step 6, does that mean that i have to download super su from chainfire while i m still in recovery mode? And once agn in the system after uninstalling kingroot and rebooting in recovery do i have to install SuperSU in the recovery mode? If yes then how?
3- last question. Entering recovery is just vol down button or power + vol down both.
Once again sorry for such basic questions but i m completely new in the world of rooting plus i want to make sure i know what i m doing.
Thanks for ur patience. Appreciate.
Click to expand...
Click to collapse
1. You cannot install recovery directly from the system on Z2 like on other phones, Z2 has no recovery partition. This can only be done with unlocked bootloader. Just make sure you have a working root access with Kingroot and USB debugging enabled when you connect your Z2 to a PC.
2. Download superSU from chainfire while still in system, then reboot to recovery and flash it trough recovery. It's a flashable zip. Before booting to recovery unroot your phone trough Kingroot app. SuperSU zip will flash su binaries and the app to system partition automatically and will root your phone again. Rooting trough Kingroot is done only to flash the recovery, then its deleted.
3. After you successfully install tge recovery when you power on your Z2 it will vibrate and flash green LED on sony bios logo. Then you hold down vol down key until led flashes purple. Afterward it will boot to recovery.
5ageman said:
1. You cannot install recovery directly from the system on Z2 like on other phones, Z2 has no recovery partition. This can only be done with unlocked bootloader. Just make sure you have a working root access with Kingroot and USB debugging enabled when you connect your Z2 to a PC.
2. Download superSU from chainfire while still in system, then reboot to recovery and flash it trough recovery. It's a flashable zip. Before booting to recovery unroot your phone trough Kingroot app. SuperSU zip will flash su binaries and the app to system partition automatically and will root your phone again. Rooting trough Kingroot is done only to flash the recovery, then its deleted.
3. After you successfully install tge recovery when you power on your Z2 it will vibrate and flash green LED on sony bios logo. Then you hold down vol down key until led flashes purple. Afterward it will boot to recovery.
Click to expand...
Click to collapse
@5ageman Thanks for ur reply. but i have few more things to say..
1- no i didnt mean in the system. What i read was that when u root with kingroot u r nt suppose to reboot until u install recovery. Otherwise it might cos prbs and nt install SuperSU.
2- What does flashable exactly mean. Is it nt just installing? I dload the superSU from chainfire while in the system and install in the recovery, right? Where will i find the zip to install it? (sorry... Had to ask)
3- i think i got that...i ll knw that exactly when i try it...lol
talkativetaurus said:
@5ageman Thanks for ur reply. but i have few more things to say..
1- no i didnt mean in the system. What i read was that when u root with kingroot u r nt suppose to reboot until u install recovery. Otherwise it might cos prbs and nt install SuperSU.
2- What does flashable exactly mean. Is it nt just installing? I dload the superSU from chainfire while in the system and install in the recovery, right? Where will i find the zip to install it? (sorry... Had to ask)
3- i think i got that...i ll knw that exactly when i try it...lol
Click to expand...
Click to collapse
1. You wont face any issues if you reboot, but you dont have to. Just plug your phone to PC while your phone is in android. Yes you download in system and then install - flash in recovery by tapping "install" and then you navigate to supersu.zip and select it and then swipe to flash it. The supersu.zip will be there where you download it, most likely on internal storage in download folder.
2. Flashable means its installed trough recovery - its flashed as opposed to being installed normally in android system.
So is it safe to root my Z2 with this? I have 15.1.1 264 stock rom, is this safe?
nemanja899 said:
So is it safe to root my Z2 with this? I have 15.1.1 264 stock rom, is this safe?
Click to expand...
Click to collapse
If you follow the guide correctly and know basic android rooting and romming then yes its safe, I rooted my Z2 the same exact way. 5.1.1 264
#################################
Phone info: Xperia Z2
Version : Marshmallow 6.0.1 (23.5.A.1.291)
Rooted : yes
Bootloader : locked
TWRP : yes
Was flashed from computer.
#################################
Problem:
1. Hello I rooted my Xperia Z2 with this method -> https://forum.xda-developers.com/xperia-z2/general/tool-rooting-23-5-1-291-supersu-t3437280 (did the exact same steps)
2. My phone successfully booted in TWRP recovery and I managed to root it without any problem.
3. So because I thought I had no problems I decided to install few apps : Trickster MOD, Smart Booster, Root Explorer, Quick reboot, BetterBatteryStats, eMMC check. everything went right.
4. so I found a thread on how to install Xposed 3.1.1 on my phone, so I installed the apk, and when I tried to reboot in recovery it went into a loop and came back on ''Sony logo'' everytime I tried. I'm still able to use my phone, I just can't go into recovery.
Solutions I have tried :
* Reinstalled TWRP from computer (same source as above).
* Installed TWRP from Rashr app.
* Booted recovery from Quick Reboot app.
All failed.
This is stressing me out, I hope I didn't break it! I stopped trying so I don't make it worse than it is.
Any help is very appreciated
NOTE : I'm not as good as you guys, if you don't mind explaining things to me with steps that would be very nice!
Jay969 said:
#################################
Phone info: Xperia Z2
Version : Marshmallow 6.0.1 (23.5.A.1.291)
Rooted : yes
Bootloader : locked
TWRP : yes
Was flashed from computer.
#################################
Problem:
1. Hello I rooted my Xperia Z2 with this method -> https://forum.xda-developers.com/xperia-z2/general/tool-rooting-23-5-1-291-supersu-t3437280 (did the exact same steps)
2. My phone successfully booted in TWRP recovery and I managed to root it without any problem.
3. So because I thought I had no problems I decided to install few apps : Trickster MOD, Smart Booster, Root Explorer, Quick reboot, BetterBatteryStats, eMMC check. everything went right.
4. so I found a thread on how to install Xposed 3.1.1 on my phone, so I installed the apk, and when I tried to reboot in recovery it went into a loop and came back on ''Sony logo'' everytime I tried. I'm still able to use my phone, I just can't go into recovery.
Solutions I have tried :
* Reinstalled TWRP from computer (same source as above).
* Installed TWRP from Rashr app.
* Booted recovery from Quick Reboot app.
All failed.
This is stressing me out, I hope I didn't break it! I stopped trying so I don't make it worse than it is.
Any help is very appreciated
NOTE : I'm not as good as you guys, if you don't mind explaining things to me with steps that would be very nice!
Click to expand...
Click to collapse
Just flash .291 ftf using flashtools
You can find steps if you search it on xda
If you didn't found anything i will explain it to you
And another thing you can find .291 ftf on Google just search " .291 ftf for Xperia z2"
And remember if you have D6502 model download ftf for d6502 if you have d6503 download ftf for that
I'm already flashed d6503,. 291... I achieved to boot in twrp once but thats about it. Unless you suggest me to flash again?
/e : if yes, do I take the one included in this? https://forum.xda-developers.com/xperia-z2/general/tool-rooting-23-5-1-291-supersu-t3437280 (that's the one I used before)
Jay969 said:
I'm already flashed d6503,. 291... I achieved to boot in twrp once but thats about it. Unless you suggest me to flash again?
/e : if yes, do I take the one included in this? https://forum.xda-developers.com/xperia-z2/general/tool-rooting-23-5-1-291-supersu-t3437280 (that's the one I used before)
Click to expand...
Click to collapse
If your phone goes to bootloop and you have locked bootloader the only way to bring your phone back to live is using flashtools
And no matter where you find the ftf file
(If i get your questions wrong please correct me)
I'm pretty sure you're trying to enter recovery mode the wrong way, this is how you do it.
1. Turn off your phone
2. Press Power button and RELEASE IT when it turns on
3. Wait for it to vibrate and a green led will turn on
4. Press Vol down button till the led color changes to pink
5. That's it, it'll show the TWRP screen.
Hope it helps.
viktorfk said:
I'm pretty sure you're trying to enter recovery mode the wrong way, this is how you do it.
1. Turn off your phone
2. Press Power button and RELEASE IT when it turns on
3. Wait for it to vibrate and a green led will turn on
4. Press Vol down button till the led color changes to pink
5. That's it, it'll show the TWRP screen.
Hope it helps.
Click to expand...
Click to collapse
ty for everyone that tried to help me, I really appreciate it!
I guess even with locked bootloader, the actual real fix it this one! you were right, I guess that's because the original recovery mode has a different process to open it. That's why even with ''quick reboot app'' it didn't work... now I feel dumb, this solution worked well! tyvm
last few questions though : since I flashed and installed twrp recovery, 1. is my stock recovery gone? 2. is it safe to factory reset with twrp? 3. If I factory reset with twrp, will it bring back my stock recovery?
So uhm first time posting in XDA, and also first time rooting a phone in my life...
Anyways apparently twrp doesn't have an official custom recovery for the J6... and despite searching for the J600G (specificaly: J600GDXSACVB1), I was unable to find any proper website for my model (ive heard I need the exact file for my exact model)... maybe you guys know any twrp custom recovery for it....
And after that... some are saying just flash magisk, some are saying I need to disable VaultKeeper to really unlock Bootloader to then root the device... so I am getting confused
If anyone can help that'll be great!
Phone Info:
Android Version: 10
Baseband Version: J600GDXSACVB1
Knox version: Knox 3.5 (idk if this is needed)
"OEM Unlocking" option in developer setting is enabled
"USB Debugging" is also enabled
ThatUnknownDude said:
So uhm first time posting in XDA, and also first time rooting a phone in my life...
Anyways apparently twrp doesn't have an official custom recovery for the J6... and despite searching for the J600G (specificaly: J600GDXSACVB1), I was unable to find any proper website for my model (ive heard I need the exact file for my exact model)... maybe you guys know any twrp custom recovery for it....
Click to expand...
Click to collapse
TWRP =/= root. Root means you have SU access in Android system. Recovery mode is a separate environment; the difference between TWRP and stock recovery is that TWRP allows you to flash unsigned images.
If you just want to root your phone with Magisk, you can follow these instructions.
Otherwise, if you want to be able to flash custom ROMs, you can use this to patch your stock recovery to enable Fastbootd which will allow you to flash partitions directly instead of using Odin.
ThatUnknownDude said:
And after that... some are saying just flash magisk, some are saying I need to disable VaultKeeper to really unlock Bootloader to then root the device... so I am getting confused
Click to expand...
Click to collapse
Yes, see the Magisk instructions I linked. Samsung likes to make things complicated, so when you've unlocked the bootloader, it still won't let you flash custom images until Vaultkeeper has been disabled.
Hmm ok thanks.. I saw the Magisk installation help page and I am getting stuck in this part:
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: power off your device and press the download mode key combo for your device
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
Click to expand...
Click to collapse
I am long pressing volume up button in download mode however nothing is happening...
(Edit) Oh and KG State (which I assume is another word for RMM Lock) is just showing 'checking' and not 'prenormal' or anything...
I think TWRP may be the cause of the bootloop. I flashed a stock firmware of J600G to completely reset it (factory reset of sorts) and then flashed TWRP, and entered the recovery screen. After that the bootlooping issue started... is there any other good custom recoveries?
Hi TUD, fellow J600G user here, I'd recommend you to start off easy by installing TWRP 3.2.3.
Requirements -
Odin installed on your computer.
USB cable
TWRP tar file
To install TWRP -
1. Switch your phone off and hold volume up and down buttons at the same time while connecting your phone to the computer by cable.
2. Open Odin and go to options, switch off auto reboot, now click on AP and select your TWRP tar file.
3. Now after Odin says PASS disconnect the cable from your phone and hold Volume down + power button for 7 seconds and as soon as the screen goes black hold Volume up + power button. This will boot you into your newly installed TWRP.
When it comes to custom roms J6 has some limitations for a few good ones. In my opinion you can install EvolutionX 4.0 (made by @adi_ss) that is based on android 10 as its the easiest rom to install. All you have to do is follow the instructions given by the developer.
Happy Flashing.