Since I am new and can't post in the development forum...
I really like this Rom but I can not get it to access any network functions either cell or data. I have tried both versions, waited when flashed and booted before rebooting, dirty flashed v1 to v2... but no matter what I get these:
SAE has stopped (after boot up)
Insert Sim Card to access network services (on sprint?)(when attempting to turn Mobile Data on)
and it says in the top bar "checking device status"
Can not update profile or prl
Please help...
What modem and baseband are you on?
Sim card not recognized
I have the same problem although SAE went away when I chose note 3 camera but still no service and Sim card not found!
Modem is listed as unknown and not even an option for baseband
jhunt75 said:
What modem and baseband are you on?
Click to expand...
Click to collapse
Baseband is N900PVPUDNH7
Where do I find Modem Info?
Its under settings and about device
UltraVegas said:
Baseband is N900PVPUDNH7
Where do I find Modem Info?
Click to expand...
Click to collapse
Someone correct me if I am wrong, but you need to be on OC5 lollipop.
Smart select fire Air Command doesn't seem to be working, does anyone how to fix? I used that pretty often
Sent from my SM-N900P using Tapatalk
12gage said:
Smart select fire Air Command doesn't seem to be working, does anyone how to fix? I used that pretty often
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
sac's rom is ancient and other people have made improvements to darkera's Lp note 5 port. Try Music of Life LP rom from main note3 forum. Since there's zero interest to port them to the sprint , install with XAS csc to allow apn editing. If you don't mind some bugs, try the S7 edge ports instead. Darkera, music of life, and others currently have s7 ports. They all have their own threads (darkera has his english thread at samsungvn) if you want to ask further questions about them.
12gage said:
Smart select fire Air Command doesn't seem to be working, does anyone how to fix? I used that pretty often
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Try going to build.prop and changing the device name to:
ro.product.model=SM-G925F
I'm not sure why either wouldn't work they work fine for me but that is a setting I changed to get themes to work.
xsisbest said:
Try going to build.prop and changing the device name to:
ro.product.model=SM-G925F
I'm not sure why either wouldn't work they work fine for me but that is a setting I changed to get themes to work.
Click to expand...
Click to collapse
I'll try that, thank you again for all of your help. I have noticed that smart select is working after boot up and for a little while after, then it stops. Something must be killing it after a while, I've tried deselecting various Xposed modules but have stuck out so far figuring out the correct one. Hopefully this will work
12gage said:
I'll try that, thank you again for all of your help. I have noticed that smart select is working after boot up and for a little while after, then it stops. Something must be killing it after a while, I've tried deselecting various Xposed modules but have stuck out so far figuring out the correct one. Hopefully this will work
Click to expand...
Click to collapse
Try freezing sae 2.0 in titanium. Seemed like that had something to do with it as well. It's been a while.
darksavior said:
sac's rom is ancient and other people have made improvements to darkera's Lp note 5 port. Try Music of Life LP rom from main note3 forum. Since there's zero interest to port them to the sprint , install with XAS csc to allow apn editing. If you don't mind some bugs, try the S7 edge ports instead. Darkera, music of life, and others currently have s7 ports. They all have their own threads (darkera has his english thread at samsungvn) if you want to ask further questions about them.
Click to expand...
Click to collapse
Thank you, I did want to try Phronesis' 6.5 but just wasn't confident that I'd be able to get data to work. I seems like it works great with xposed, enough though there's so much baked in that most modules wouldn't be necessary. I wanted a 5.1.1 stable ROM, MM still seems to be too buggy, it seems like Sac's was the only alternative for me, but I guess I need to figure out the APN option to make others work with Sprint.
Related
Hi, this is the first PORTED ROM I release, and also the first P.A.C. ROM for the HOX+, I tryed to build from source for about 2 weeks and keept fixing errors, making needed files to just get new errors and new needed files not found and in the end I tryed to build CM just to see if I can even build that, and it worked, so I realised PACman was a bit over my powers and gave up and deleted the source, but after a bit KaptKeefmenneke sent me his PACman 22.1.1 and I sterted porting newer versions over it with great success, so here I am posting this rom after geting permisions from both KaptKeefmenneke and [vertigo] to post it.
This rom is for the INTERNATIONAL ONE X+
This rom was ported from the NEXUS4 over an unreleased P.A.C. 22.1.1 for the HOX+
I will update the rom as long as I can, and fix as many bugs as I can with my limited development knoledge.
This rom also has an OPD (OpenPDroid) patch that can be flashed after flashing the rom.
I hope you will enjoy it as much as I do.
Not working:
-no vibration when touching the touch buttons-did all that came into my mind but still can't make the vibrations work, even did the framework-res.apk edit that should enable it and no luck, if anyone has any Ideea I'd like to hear it.
-headsets not recognised, looking to find a fix but I am kinda blind at this part because I don't know what files contain things related to headset.
-same things as in all other aosp roms
-you tell me
Bugs:
-same things as in all other aosp roms
-OS is allways in black mode, the PAC in Black toggle doesen't do anything.
-you tell me
NOTE: for bugs that need it, post logs, I did not include the Sharelogs and Performance Tool apk's so you will have to download them, sorry, also even if I am not too much of a developer I can mostly read logs, also post if you find any fixes for any bugs, don't expect me to be able to fix all the bugs that may appear, remember I am preety new in the development thing and my knoledge is limited (verry limited as far as I understand) and my time is also limited due to school.
Working:
-mostly everything as far as I can see
I would not recommend using this rom with Xposed Framework even if it is great just because of the same reason it is not really working ok on AOKP (it will take longer for the SystemUI to load)
Downloads:
Rom: http://www.mediafire.com/download/mg8sdj47cs5fq9k/enrc2b_PAC_JB_4.2.2-v23.0.0.zip
Gapps: http://goo.im/gapps/gapps-jb-20130301-signed.zip
Kernel: Use CM10.1 kernel, DO NOT use the included kernel as many things will not work with it (wifi, bluetooth, etc)
OpenPDroid patch: http://www.mediafire.com/download/1..._4.2.2-v23.0.0-openpdroid-20130612-update.zip (No dark mode in Messages app, will try to fix, but don't think I can till I will manage to build from source) for the moment I would say just use XPrivacy if you can live with the SystemUI startup delay added by XPosed.
Thanks to...
ParanoidAndroid Team
CyanogenMod Team
AOKP Team
P.A.C. Team
Maxwen and Lloir for theyr great work on this device
[vertigo] for making the NEXUS4 rom (here:http://forum.xda-developers.com/showthread.php?t=21468790)
KaptKeefmenneke for making the P.A.C. 22.1.1 rom for enrc2b
FFU5y for OpenPDroid
mateorod for the Auto-Patcher
Reserved for changelog
Reserved also just in case.
I've removed some posts about permissions. Feel free to continue via PM and CC me if need be
Sorry if I missed it, but which version of the HOX+ will this work on?
For my purposes, does it work with AT&T version?
Arvoreen said:
Sorry if I missed it, but which version of the HOX+ will this work on?
For my purposes, does it work with AT&T version?
Click to expand...
Click to collapse
Nope, this is also for the international variant
Sent from my HTC One X+ using xda premium
aardappel12 said:
Nope, this is also for the international variant
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
I was afraid you would say that....
I might be wrong but shouldn't this be under the original android development section.
Nice work btw
Sent from my HTC One X+ using Tapatalk 2
flipside101 said:
I might be wrong but shouldn't this be under the original android development section.
Nice work btw
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
Nope, due to the fact that it is not built from source
Headphone/Earphone jack doesn't work. Music just plays on the phone speaker.
And is multi user supposed to work? I can't seem to setup a second user.
KiGWa said:
Headphone/Earphone jack doesn't work. Music just plays on the phone speaker.
And is multi user supposed to work? I can't seem to setup a second user.
Click to expand...
Click to collapse
Will have a look as soon a I reupload the rom, thanks for reporting.
Just so people are aware, pacman can and does have HUGE issues with some apps on the market.
Could someone that has this installed tell me if they have any problems with the signal (not getting signal at all), cause a friend had it when he flashed it to his X+ and I also did have the problems after wiping data, then fixed the problem as my friend told me to and then wiped data again and set up the device and did this process again and again lots of times and I only got that once, but at the first wipe data I had my data from the 22.1.1 pacman rom, if anyone else has this problem I will post a how to fix it in the OP, I am not sure if it is related to the rom or not, that is why I am not adding the bug and fix to the OP, for me it happened only once, and my friend has lots of apps installed so it may have been caused by an app for him, test if you have this problem and tell me please.
Ranomez said:
Could someone that has this installed tell me if they have any problems with the signal (not getting signal at all), cause a friend had it when he flashed it to his X+ and I also did have the problems after wiping data, then fixed the problem as my friend told me to and then wiped data again and set up the device and did this process again and again lots of times and I only got that once, but at the first wipe data I had my data from the 22.1.1 pacman rom, if anyone else has this problem I will post a how to fix it in the OP, I am not sure if it is related to the rom or not, that is why I am not adding the bug and fix to the OP, for me it happened only once, and my friend has lots of apps installed so it may have been caused by an app for him, test if you have this problem and tell me please.
Click to expand...
Click to collapse
I did not have any issue with signals on both wifi and mobile network. Though, before i adb pushed the rom/gapps zip, I did a full wipe of the system, data and caches. The phone was like totally empty before i install this ROM.
KiGWa said:
I did not have any issue with signals on both wifi and mobile network. Though, before i adb pushed the rom/gapps zip, I did a full wipe of the system, data and caches. The phone was like totally empty before i install this ROM.
Click to expand...
Click to collapse
Ok, thank you, also could you tell me if it is just me or even if the PAC in black toggle is off the os is still in the black ui?
Ranomez said:
Ok, thank you, also could you tell me if it is just me or even if the PAC in black toggle is off the os is still in the black ui?
Click to expand...
Click to collapse
yup, os ui is black even toggle is off.
Ranomez said:
Could someone that has this installed tell me if they have any problems with the signal (not getting signal at all), cause a friend had it when he flashed it to his X+ and I also did have the problems after wiping data, then fixed the problem as my friend told me to and then wiped data again and set up the device and did this process again and again lots of times and I only got that once, but at the first wipe data I had my data from the 22.1.1 pacman rom, if anyone else has this problem I will post a how to fix it in the OP, I am not sure if it is related to the rom or not, that is why I am not adding the bug and fix to the OP, for me it happened only once, and my friend has lots of apps installed so it may have been caused by an app for him, test if you have this problem and tell me please.
Click to expand...
Click to collapse
got no data signal,too.please post your solution.had same issue while trying to port pa2.5x (from N4,too),but never explored why.
thnksAlot,alex
maerdance said:
got no data signal,too.please post your solution.had same issue while trying to port pa2.5x (from N4,too),but never explored why.
thnksAlot,alex
Click to expand...
Click to collapse
Go to settings->More->Mobile Networks, wait for it to load, click automatically connect around 3 times, it will give you an error, but in 1 min you should be connected and allmostly sure that it should not happen again.
EDIT: Found a real solution, will upload a fixed rom when I get home in 5 and a half hours, at school now and getting ready for a exam.
EDIT2: found the solution and updated apktool to decompile framework, apply fix and recompile and get errors at recompiling......is there a special apktool for pacman or something?
->Ranomez:Go to settings->More->Mobile Networks, wait for it to load, click automatically connect around 3 times, it will give you an error, but in 1 min you should be connected and allmostly sure that it should not happen again.
chaos leads to a new order. how did you find out this kind of weird(individual?)
input/output behavier.
I suppose we found a proof of that android should be labelled alive : )
will 'apply' later. thank you for your afford in this rom in general.
greets, alex
maerdance said:
->Ranomez:Go to settings->More->Mobile Networks, wait for it to load, click automatically connect around 3 times, it will give you an error, but in 1 min you should be connected and allmostly sure that it should not happen again.
chaos leads to a new order. how did you find out this kind of weird(individual?)
input/output behavier.
I suppose we found a proof of that android should be labelled alive : )
will 'apply' later. thank you for your afford in this rom in general.
greets, alex
Click to expand...
Click to collapse
I may be sleepy or something wrong with me cause I just woke up and I can't remember half of yesterday but I don't understand anything of what you sayd.
Also for anyone that wants to help me can you please try to apply the fix at the bottom of the OP in this thread http://forum.xda-developers.com/showthread.php?t=1908008 to the framework in my rom, cause for me it doesen't work, I can not recompile the framework even if I don't change anything, so I decompile it and try to recompile and fail, also I get some errors at the decompilation part also, but it seems to decompile.....
EDIT: anyone having a problem that when you talk with someone the other person hears himself, cause dad told me that today, but no one else told me till now?
Hello fellow XDA people. My question to all of you is that is it possible to use the Omega ROM meant for the i9505 variant to be flashed and used on this Verizon variant? Like can the following be usable (to those that have or are willing to use Omega and test it out):
- Data (3G/4G and Wifi)
- Wifi Tethering
- Any features added to the XXUBMEA update that this ROM is built from (Such as HDR video recording, more space available, less lag, etc.).
- Messaging
- Call Recording and any other mods added to this ROM
BTW it is possible to use i9505 ROMs on the Verizon variant but I haven't heard of anyone that has tried out Omega so that I can see if they have experienced any bugs relating to Wifi, Data, or other features and mods. Idk if I can post the link but I can say that there is a guide to install i9505 ROMs on this device somewhere in this section.
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Edit: You should not flash any ROM not specific to your carrier as there are carrier specific files included. You could lose data connectivity or spam other carriers with errors. There are ways to port other ROMs but those are very advanced tasks.
Yes, flash and use your carriers kernel (important) and add your apn settings, it will work.
TheAxman said:
Yes, flash and use your carriers kernel (important) and add your apn settings, it will work.
Click to expand...
Click to collapse
Are you sure? I flashed the Omega rom and ktoonsez kernel last night and the rom seems to work, however I have no data. When I tried to manually add my apn settings the 'Access Point Names' option is completely missing from the menu.
Kejay3190 said:
Are you sure? I flashed the Omega rom and ktoonsez kernel last night and the rom seems to work, however I have no data. When I tried to manually add my apn settings the 'Access Point Names' option is completely missing from the menu.
Click to expand...
Click to collapse
I would like to know soon because I'm getting my GS4 either today or tomorrow. If data and everything works then I'm gonna head off and flash Omega. And please give step by step instructions if you can, thank you.
Any help is appreciated.
Anybody tried and tested it out yet? Phone should be coming in sometime soon.
EDIT: woops sorry for double posting.
The Access Point Names setting seems to come and go. When its there, I can put my apn settings in and I have 4g data, but after a while the setting just disappears and I lose mobile data.
Kejay3190 said:
The Access Point Names setting seems to come and go. When its there, I can put my apn settings in and I have 4g data, but after a while the setting just disappears and I lose mobile data.
Click to expand...
Click to collapse
EDIT: Nvm you said ktoonsez kernel. Maybe try another kernel or as I said a reflash or something. I would like to know. Phone is still coming, FedEx is being slow today.
I've tried the ktoonsez kernel as well as the faux kernel. I also tried flashing the wanamlite rom just to see if it was just an issue with the omega rom, but I still get the same problem. And yes, I did try reflashing it but the problem is still there.
Kejay3190 said:
I've tried the ktoonsez kernel as well as the faux kernel. I also tried flashing the wanamlite rom just to see if it was just an issue with the omega rom, but I still get the same problem.
Click to expand...
Click to collapse
That's strange. Hm. Hope I don't run into the same problem.
You probably will run into the same problems if all the system apps and config files don't have the necessary codes and designations in it. The RIL lib files are different too amongst other things.That's not to say a ROM couldn't have more universal system settings. Or that you couldn't change the settings/databases/configs yourself.
I've found work arounds for all the issues so far but they aren't novice user friendly. I may do a write up after I'm done my port.
Sent from my SCH-I545 using xda premium
Dubbsy said:
You probably will run into the same problems if all the system apps and config files don't have the necessary codes and designations in it. The RIL lib files are different too amongst other things.That's not to say a ROM couldn't have more universal system settings. Or that you couldn't change the settings/databases/configs yourself.
I've found work arounds for all the issues so far but they aren't novice user friendly. I may do a write up after I'm done my port.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
So would data and all that work properly on Omega on the i545? Or would there be things that I would need to configure.
Kejay3190 said:
Are you sure? I flashed the Omega rom and ktoonsez kernel last night and the rom seems to work, however I have no data. When I tried to manually add my apn settings the 'Access Point Names' option is completely missing from the menu.
Click to expand...
Click to collapse
According to kejay it has no data without doing work.
Sent from my SCH-I545 using xda premium
Dubbsy said:
According to kejay it has no data without doing work.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
That sucks. I've seen some people get it working I think and a little bit according to kejay except for the fact his/her APN settings come and go along with data. Omega is a really great ROM but I guess I might just have to go with HyperDrive which I've already downloaded but I've heard of a few bugs here and there as of RLS 4.
[EDIT] Anyone got data working yet or anything? Or should I just use HyperDrive? Got my phone like 5 minutes ago.
NOTE: stvn1337 now is the ROM Port Maintainer.
This is an port of Sky Note from our sister AT&T Note 2 variant. Most things are working on this with a few exceptions like SMS/MMS. This ROM is developed by seanzscreams and wouldn't have been possible to be working on our Note 2 without the hard work of runandhide05 along with several others. Keep in mind that while this runs pretty well there are naturally bugs so be forwarded. I'll try to keep this updated as more bugs are found but so far from my time running this it's pretty smooth with a few exceptions. Please consider this to be experimental and not a fully daily driver.
Original Sky Note ROM thread by seanzscreams with info, pictures, etc.
TouchWiz 4.3 Base Thread by runandhide05
BUGS AND NOTES
- To get data to work you have to toggle airplane mode on then off after booting up.
- Wifi does not work without applying the Wifi Fix that I have detailed below.
- Dial pad does not work while in calls.
- SMS/MMS does not work.
- Backing up this ROM with either Clockworkmod or TWRP works but restore does not.
- Restoring apps from Titanium Backup works on this from my testing without the need of TB Restore Fixer.
If there's anything else in terms of bugs etc I'll update this accordingly.
ROM DOWNLOADS
RC8-2 (11/14/12)
Android File Host
Dev-Host
RC8 (11/11/13)
Android File Host
Dev-Host
MD5: c7bf06fee5c4b4af19b2bf0ce66de935
WIFI PATCH FIX
Here's how to get Wifi working. Do this after installing the ROM. Thanks to seanzscreams for the fix and stvn1337 for posting the info. What this fix does is adds the paramaters needed for Wifi to work on TouchWiz 4.3 based ROMs while still allowing us to flash to other ROMs outside of the TouchWiz 4.3 stuff. Be forwarded that these steps do need to be followed pretty much dot on especially when it comes to apply the patch. Deviating on that part might cause some major issues including bricking your device. I will not be held liable if that were to happen or will XDA. You've been pretty well warned. Don't worry this is a pretty easy patch to apply so don't worry too much about it. Smile, eat a Kit Kat, and just do what I tell you. In no time you'll have working Wifi on this ROM.
FILES
Odin3 Version 1.85
Android File Host
Dev-Host
WiFi Fix
Android File Host
Dev-Host
INSTRUCTONS
1 - Download Odin3 and the WiFi Fix files.
2 - Extract Odin3 and the WiFi Fix files. For the WiFi fix you just need to extract 4.3param_tz.zip so the 4.3param_tz.tar file is ready for us with Odin3.
3 - Download and install Samsung drivers if you don't have them already.
4 - Turn off Note 2. After turned off press Volume Down + Home Button + Power to boot into the bootloader.
5 - Plug Note 2 into PC with Odin3 running.
6 - Once your PC has detected and installed drivers your Note 2 should show up in Odin3.
7 - Load the Wifi fix file (should be named 4.3param_tz.tar) into the PDA option in Odin3.
8 - Hit the Start button. It'll only take seconds for the file to do its magic then your Note 2 will reboot into recovery.
9 - Reboot out of recovery.
10 - ????
11 - Wifi should work now!
12 - ????????
13 - PROFIT!
Wifi Fix Source (using step 2)
Screen shot attached showing Wifi working on my end after applying this patch.
CHANGE LOG
Changes done on each version by seanzscreams are in his notes here.
Verizon Port Changes
R8-2
- Integrated MMS fix by stvn1337. Worked for me but others are reporting its not working.
- Slipstreamed the R8-2 update into the R8-1 ROM release.
- Removed the Lightsaber S-Pen sounds added into R8-1/R8-2.
AngryManMLS thanks: Thanks to seanzscreams for the ROM and Wifi fix, runandhide05, lacoursiere18, and 1Brite1 for the Verizon data fix, stvn1337 for confirming the Wifi fix works and the MMS fix, moosiemooses for contributing to helping with the SMS/MMS fix, and anyone I forgot to mention for all the hard work that has went into this.
Sweeeeet my gf on her att note 2 is loving this rom.. thanks seanzscreams! Beans hasnt updated his fabulous rom since 9-26 so im gonna use this one despite the wifi bug.. I didnt mean to just thank seanzscreams.. sorry I just got excited..thank you too AngryMan!
Sent from my SCH-I605 using Tapatalk
drarkanex said:
Sweeeeet my gf on her att note 2 is loving this rom.. thanks seanzscreams! Beans hasnt updated his fabulous rom since 9-26 so im gonna use this one despite the wifi bug.. I didnt mean to just thank seanzscreams.. sorry I just got excited..thank you too AngryMan!
Click to expand...
Click to collapse
Well truth be told there isn't much left that Beans can really do with his JellyBeans ROM on our Note 2 as it's pretty polished as is. Not to mention he's been very busy working on bringing JellyBeans over to the Verizon Note 3 as well.
True.. ok AngryMan. Loaded skynote. On it now. First boot. No data but got a signal. Wifi mode toggles back to off auto. Airplane mode on then back off. 4g is up.. wifi keeps toggling back off.. question. . Which modem do you suggest?
Sent from my SCH-I605 using Tapatalk
---------- Post added at 01:24 AM ---------- Previous post was at 01:23 AM ----------
And other than wifi. Veeeery smooth.. I like it a lot
Sent from my SCH-I605 using Tapatalk
drarkanex said:
True.. ok AngryMan. Loaded skynote. On it now. First boot. No data but got a signal. Wifi mode toggles back to off auto. Airplane mode on then back off. 4g is up.. wifi keeps toggling back off.. question. . Which modem do you suggest?
Click to expand...
Click to collapse
Wifi won't toggle on at all which is why I noticed several times about it in the main post. As far as modem I'm using VRAMC3 myself.
Also can someone test SMS/MMS for me. I don't text so I didn't get a chance to test. From my understanding Hangouts which is included works fine for SMS but if someone can verify that would be great.
Sms fails even through hangouts..
Sent from my SCH-I605 using Tapatalk
drarkanex said:
Sms fails even through hangouts..
Click to expand...
Click to collapse
Thank you. I've updated the main post to reflect that.
Fyi. My gf runs the at&t skynote 4.3 and her dial pad works while in a call. Just tested that.
Sent from my SCH-I605 using Tapatalk
---------- Post added at 01:54 AM ---------- Previous post was at 01:41 AM ----------
Oh. In order for her phone to work I had to flash the MJ4 Modem. If you look in build notes on your rom. Youll see mj4..
Sent from my SCH-I605 using Tapatalk
drarkanex said:
Oh. In order for her phone to work I had to flash the MJ4 Modem. If you look in build notes on your rom. Youll see mj4..
Click to expand...
Click to collapse
Yeah the tough thing is that unless if someone knows how to port the modem and kernel over to our Note 2 we might be stuck with these bugs until we get some kind of 4.3 Touchwiz leak or official release.
Anyways I'm off to bed for the night. Dead tired here and I got a long day at work coming up.
Thanks AngryMan. Wifi is no biggie for now. Liquidsmooth rom may have some answers or a workaround..
Sent from my SCH-I605 using Tapatalk
drarkanex said:
Thanks AngryMan. Wifi is no biggie for now. Liquidsmooth rom may have some answers or a workaround..
Click to expand...
Click to collapse
Keep in mind that Liquidsmooth is AOSP based while Sky Note is TouchWiz based.
I take that back. My mms and sms is working. I got a terrible signal when testing it last night. Even in hangouts.. edit I can receive but not send
Sent from my SCH-I605 using Tapatalk
Is it OK to flash another kernel?
Sent from my SGH-I605 using xda app-developers app
AngryManMLS said:
This is an port of Sky Note from our sister AT&T Note 2 variant. Most things are working on this outside of Wifi due to the lack of a proper kernel/bootloader for our Note 2 that supports Wifi. This ROM is developed by seanzscreams and wouldn't have been possible to be working on our Note 2 without the hard work of runandhide05 along with several others. Keep in mind that while this runs pretty well there are naturally bugs so be forwarded. I'll try to keep this updated as more bugs are found but so far from my time running this it's pretty smooth with a few exceptions. Please consider this to be experimental and not a fully daily driver.
Original Sky Note ROM thread by seanzscreams with info, pictures, etc.
TouchWiz 4.3 Base Thread by runandhide05
A Few Notes Please Read:
- To get data to work you have to toggle airplane mode on then off after booting up.
- Wifi does not work due to lack of proper kernel/bootloader that supports Wifi.
- Dial pad does not work while in calls.
- SMS/MMS does not work.
- Backing up this ROM with either Clockworkmod or TWRP works but restore does not.
- Restoring apps from Titanium Backup works on this from my testing without the need of TB Restore Fixer.
If there's anything else in terms of bugs etc I'll update this accordingly.
ROM DOWNLOAD (Dev-Host)
MD5: c7bf06fee5c4b4af19b2bf0ce66de935
Thanks to seanzscreams, runandhide05, and anyone I forgot to mention for all the hard work that has went into this.
Click to expand...
Click to collapse
does this mean you are stuck on this rom once flashing, or that you just have to flash a new rom rather than going back to a back up?
viper31573 said:
does this mean you are stuck on this rom once flashing, or that you just have to flash a new rom rather than going back to a back up?
Click to expand...
Click to collapse
No it says if you do a backup with this ROM it won't restore but your other ones will.
You guys are impatient. The ota hits in like two weeks
Sent from my SCH-I605 using Tapatalk 2
AngryManMLS said:
This is an port of Sky Note from our sister AT&T Note 2 variant. Most things are working on this outside of Wifi due to the lack of a proper kernel/bootloader for our Note 2 that supports Wifi. This ROM is developed by seanzscreams and wouldn't have been possible to be working on our Note 2 without the hard work of runandhide05 along with several others. Keep in mind that while this runs pretty well there are naturally bugs so be forwarded. I'll try to keep this updated as more bugs are found but so far from my time running this it's pretty smooth with a few exceptions. Please consider this to be experimental and not a fully daily driver.
Original Sky Note ROM thread by seanzscreams with info, pictures, etc.
TouchWiz 4.3 Base Thread by runandhide05
A Few Notes Please Read:
- To get data to work you have to toggle airplane mode on then off after booting up.
- Wifi does not work due to lack of proper kernel/bootloader that supports Wifi.
- Dial pad does not work while in calls.
- SMS/MMS does not work.
- Backing up this ROM with either Clockworkmod or TWRP works but restore does not.
- Restoring apps from Titanium Backup works on this from my testing without the need of TB Restore Fixer.
If there's anything else in terms of bugs etc I'll update this accordingly.
ROM DOWNLOAD (Dev-Host)
MD5: c7bf06fee5c4b4af19b2bf0ce66de935
Thanks to seanzscreams, runandhide05, and anyone I forgot to mention for all the hard work that has went into this.
Click to expand...
Click to collapse
I have managed to get wifi working quite easily
http://forum.xda-developers.com/showthread.php?t=2502464
if your comfortable with odin grab only step 2 from the link i've posted above and odin in the PDA slot. This is not flashing the ATT bootloader , but only adding the 4.3 wifi paremeters to your current 4.1.2 bootloader allowing you to maintain wifi throughout flashing between 4.1.2 and 4.3 touchwiz.
I have tested this and it does work, but i am not responsible if you do something wrong and brick your phone!
PM me if you have any questions.
.shawn. said:
You guys are impatient. The ota hits in like two weeks
Click to expand...
Click to collapse
Hey buddy there's an old saying that comes to mind. If you got nothing nice to say then keep it to yourself. I suggest you do that.
stvn1337 said:
I have managed to get wifi working quite easily
http://forum.xda-developers.com/showthread.php?t=2502464
if your comfortable with odin grab only step 2 from the link i've posted above and odin in the PDA slot. This is not flashing the ATT bootloader , but only adding the 4.3 wifi paremeters to your current 4.1.2 bootloader allowing you to maintain wifi throughout flashing between 4.1.2 and 4.3 touchwiz.
I have tested this and it does work, but i am not responsible if you do something wrong and brick your phone!
PM me if you have any questions.
Click to expand...
Click to collapse
Dude you are insanely awesome. I'll try to get around to testing this tonight. Thanks for sharing this.
viper31573 said:
does this mean you are stuck on this rom once flashing, or that you just have to flash a new rom rather than going back to a back up?
Click to expand...
Click to collapse
You can still restore a backup of another ROM or install a new ROM. It's just that any backups of this ROM won't restore properly.
Here is a HotSpot mod for NK4 devices. I did the smali edits from memory and put this together in 10 minutes so please let me know if there are any issues. It is working on my device but make a backup. Requires busybox installed for the installer.
This is for ODEXED ROMS! This is NOT DEODEXED! Don't yell at me if you can't read
Added seperate Extended Boot Menu Mod. Same rules apply.
Could you make one for the NKD build if I send you the needed file's?
The smali edits would be easy enough, However, I'm not sure how to 'odex' it and how things are affected since ART is implemented in the latest version replacing the Dalvik cache.
Short answer. I don't know....
I guess I need to install it at some point and figure out how it works
There's been quite a few downloads and no feedback whatsoever so I'll assume the mods are working?
townsenk said:
There's been quite a few downloads and no feedback whatsoever so I'll assume the mods are working?
Click to expand...
Click to collapse
Sorry about that townsenk. I flashed it on my S5 yesterday evening for the boot menu zip. Works like a champ as always. Thank you very much for what you do!
Sent from my SM-N910P
Hi townsenk;
I thin the majority of users\downloaders are on tdunham's stock 4.4.4 and deodex. At least that is my case. I'm trying to get hotstpot working and have been thus far unsuccessful. If you feel like making a Deodex version I will definitely be on the top of the list for a test. Galaxy tools have been unable to fix my issue. I am able to advertise the hotspot put no devices can connect. They hang on the obtaining IP screen.
ch99tj said:
Hi townsenk;
I thin the majority of users\downloaders are on tdunham's stock 4.4.4 and deodex. At least that is my case. I'm trying to get hotstpot working and have been thus far unsuccessful. If you feel like making a Deodex version I will definitely be on the top of the list for a test. Galaxy tools have been unable to fix my issue. I am able to advertise the hotspot put no devices can connect. They hang on the obtaining IP screen.
Click to expand...
Click to collapse
Try this. This is completely untested and probably not ready for public consumption!
Make sure you have a backup of your services.jar and have a fire extinguisher handy...
What about extended reboot for deodexed ☺ please
Extended reboot is in the tdunham OP
Sent from my SM-G900P using XDA Free mobile app
I can deodex the extended reboot mod if needed, provided I get some feedback that the deodexed hotspot version is even working. Like I said, I have no easy way to test deodexed versions and rely on simple comments like "It's Working" or "You blew up my Phone You Jerk!"
townsenk said:
Try this. This is completely untested and probably not ready for public consumption!
Make sure you have a backup of your services.jar and have a fire extinguisher handy...
Click to expand...
Click to collapse
Flashed and cleared cache. Broke my wifi. I get authentication error when trying to connect to an access point now.
Hotspot has same issue trying to assign IP. I didn't make a backup of just the services.jar (yea, know I should have). Instead just restoring a full backup with TWRP,
:EDIT: The restore did not fix the authentication error. After restore, I simply did the turn off wifi and data, turn on Airplane mode, Turn back on Wifi and that fixed it so I probably could have done that in the first place. I wanted to confirm this backup though so happy since it was a full modem\EFS (everything checked) backup.
Thank you for trying.
Sent from my SM-G900P using XDA Free mobile app
Are you using Xposed, Custom kernel or any mods or xml edits that may be affecting this?
The reason I ask is that the fact that an ip address is not getting assigned should not be a side affect of the mod regardless of it being odexed or deodexed. I also had no success in using the one click hotspot app. (which is what prompted me to do the mod in the first place). I also restored the system once it failed because I felt it may have left some undesired edits behind. The only real way would be to do the mod on a clean deodexed install. I'm not asking you to do this because I know it's a pain. I may attempt this in the next day or so depending on the feedback I get in the meantime.
EDIT: User miked63017 is testing a different way to do the hotspot mod in a recent post. You may consider trying that. he may also have more insight on your specific issue.
townsenk said:
Are you using Xposed, Custom kernel or any mods or xml edits that may be affecting this?
The reason I ask is that the fact that an ip address is not getting assigned should not be a side affect of the mod regardless of it being odexed or deodexed. I also had no success in using the one click hotspot app. (which is what prompted me to do the mod in the first place). I also restored the system once it failed because I felt it may have left some undesired edits behind. The only real way would be to do the mod on a clean deodexed install. I'm not asking you to do this because I know it's a pain. I may attempt this in the next day or so depending on the feedback I get in the meantime.
EDIT: User miked63017 is testing a different way to do the hotspot mod in a recent post. You may consider trying that. he may also have more insight on your specific issue.
Click to expand...
Click to collapse
I am now using a custom kernel but did try it with the stock kernel as well. It is weird that I don't get a complain from the Hotspot app but instead only get an issue with devices trying to connect. Maybe I'll try with a clean install over the weekend to see what happens.
No exposed. on tdunham's 4.4.4
Hotspot worked perfectly for me. But now on deodexed rom
townsenk said:
There's been quite a few downloads and no feedback whatsoever so I'll assume the mods are working?
Click to expand...
Click to collapse
Both Mods are Working Fine on my Sprint Stock ODEXed NK4. Thanks!
Anyone have a working hotspot for 4.4.4 nk4 deoxed
Sent from my SM-G900P using Tapatalk
Soldier_Rocks_08 said:
Anyone have a working hotspot for 4.4.4 nk4 deoxed
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Don't wanna hijack the thread, but if there isn't a deodexed version of the mod, the app I have in the themes and apps section under sprint s5 should work.
Sent from my SM-G900P using XDA Free mobile app
Okay thanks I'll give it a try and let you know
Sent from my SM-G900P using Tapatalk
Soldier_Rocks_08 said:
Anyone have a working hotspot for 4.4.4 nk4 deoxed
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Did you try the one from post #7 ?
Disclaimer. I am not responsible for anything that happends to you, your phone or dog. Im not responsible for anything that may happen if you flash this rom on your device. Flash at your own risk. First time me modding anything in life. You take full responsibility for your actions and consequences.
ROM DATE 11-12-2016 ANDROID 6.0.1 V4
UPDATED ROM 1/22/17 to V5
1. Darklord N5 modded with N7 apps. July Security patch. Sprint VVM Working and no FC on hangup!!! This rom is Universal for most carriers
2. Xposed included but not system wide must install files needed thru twrp I will provide the file.
3. Latest Viper included with adaway and some updated N7 apps.
4. Debloated as much as i could.
5. UBER Battery life
6. Latest VVM For Sprint
7. Super Smooth no lag
8. 6x5 Dock with 5x5 page
9. Hotspot
10. Themes
DOES NOT INCLUDE A KERNEL!!!!!
MUST FLASH USING TWRP 2.8.7.0!!!!
I RECOMMEND DARKLORD UX 2.0 hltespr its super smooth i get 15 hours Battery life without powersaving!!! about 40 on max settings 33 on mid. With white color theme. Black out device get up to 85 hours on max power save and 25 hr without power save.
Id like to thank the Darklord for his hard work and for letting me use his rom as a base.
Thank Audax for his kernel cleaner
Thank Buzbee for his Apns MNVO
I personally worked on this for months as you see the base is from july and that was the base i took.
I also included a MM Fix for SD card as some apps have an issue writing to SD you must install xposed to use it.
There will not be any updates for this rom unless i get some help please do not use my work without asking first.
I need someone who can help update the security patches as well as some of the base apps.
MUST USE LATEST BASEBAND AND FIRMWARE FROM SPRINT!!! which is PH1 if not upgrade to it reroot and then flash this rom.
Rom Video Installation Link
https://youtu.be/A3AbQHEjkRo
1. Watch Video (if downloaded old rom before V5)
1A. If downloaded V5 install as any other ROM use XAS or SPR CSC in aroma, reboot into recovery, clean kernel with cleaner, then install kernel of choice, reboot to system, wait 15 min. Profit.
2. Activate VM [email protected]
3. Give thanks or donate thanks for any donations
4. Enjoy
Note. Regular Message app wont work fully please use Textra or another alternate to the base one as it can send text and receive but cannot send Multimedia text. I recommend Textra Its beautiful and it automatically picks up Sprint APN Settings
PH1 Download
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
Rom Link below
New Link 1/22/2017 ALL In One Rolled UP TY @taijidude For This V5!
https://mega.nz/#!kYgzxZCT!YjDcaNfK4ec-1PNs3glWFU4NHFrNOxdaGVSfiBXjbXA
V5 Changelog
Here are the changes included:
- updated apns-conf.xml for both SPR and XAS so the network connects
- updated build.prop to include some Sprint specific configurations
Added
FlipboardBriefing (I like this app and use it daily... saw where others made comment so added it)
VVM
Miscellaneous Downloads Section
Kernel Cleaner
https://mega.nz/#!UMRFia6T!oU0uPaaTEdenkICyEoZZApfHa1-posmfzZFLL-0v8Ms
MVNO APNS
https://mega.nz/#!oEAjXLhI!bI1-MVMDOCpELXrRCMmLJ7O_ApK0kCTz-yfKLeCpqA8
Sprint VVM Version 8.0
https://mega.nz/#!RAgymRZA!e6kXAcwuL_q5der64E07Z6XPBRfgtky0El9Xr1jPzlE
3minit flashable by @Sczar Thank you so much for your help (use gravity box to get rid of the regular battery icon) also clear cache after installing the mod
https://mega.nz/#!0EVg0Cjb!gI_xodtl_MwfUKfkA5f89XIdqIe4W_8Rz7OhSmSVJQI
*Download Latest Adreno Drivers for 30% Increase in graphics here*
https://forum.xda-developers.com/galaxy-note-3/orig-development/adreno-330-drivers-note-3-t3523915
where do i get PH1 firmware
quietmode01 said:
where do i get PH1 firmware
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
HERE =)
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
12gage said:
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Click to expand...
Click to collapse
Please read the original post. This is not like sacs. I dont have that kind of time to have that correctly fixed but its in there I just dont know how to activate those feature (PRL, Profile Update). SMS works but again not fully for Multimedia. Use alternate app for text like Textra if you want full capabilities. I did reach out to Sac23 for advice but he stated and i quote "Its not as simple as copy and paste" "Plus i no longer have a note 3 with Sprint to be able to test" Yet if any other developer has the time to help me fix it id gladly welcome it. It does not have FC on hangup
quietmode01 said:
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
Click to expand...
Click to collapse
NP. Let me know what you think.
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.
binaryimage said:
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.[/QUOTE
it takes about 15-20 minutes to boot did you flash specifically as i instructed? I just reflashed it myself and it worked. Ill try and post a video of going thru the flashing process. Sorry it didnt work out for you
Click to expand...
Click to collapse
What recovery did you use to install this rom?
When I tried installing it, it sat for well over 20 minutes on the Samsung Splash Screen.
TWRP 2.8.7.0
I have made a video of the installation boot up time was 9 minutes after the install of rom. ill post the video tomorrow after i edit it it has my phone number and i need to block it
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
binaryimage said:
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
Click to expand...
Click to collapse
Sits on Samsung for about 10 min on mine first boot. Not when it says Samsung galaxy note 3 it just says Samsung by itself
Mine might just take a little longer then normal ill give it another shot.
binaryimage said:
Mine might just take a little longer then normal ill give it another shot.
Click to expand...
Click to collapse
I added the video on the OP. Enjoy
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Maybe its a bad upload. I will upload v4 and after I make sure it work it will be uploaded tonight sorry for the inconvience
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Same thing happened to me using Darklord kernel, tried the other kernel and would get to samsung screen and just sit, i left it alone for 40 min. Had to pull battery to shut it off, glad to know its not just me. It was driving me nuts especially after watching the video and knew i did it right.
Guys i figured out it was bad coding in the build prop i have fixed and retested on 2 different note 3s its working now im re-uploading the rom. I apologize for all the inconvenience @spaceshipunicorn @binaryimage