Related
HI all,
I have made a short how-to video on how to flash one of the many awesome roms (made by our awesome rom-makers) onto a device that doesn't have a power button. I have done it several times and as the question keeps getting raised, I thought I would show some proof.
Some advice before the video.
DO THIS AT YOUR OWN RISK!!! I'M NOT RESPONSIBLE FOR ANY DAMAGED OR FRIED PDAs
I have done this myself on an I-mate (Himalaya). It took some trial and error but I am now running WM6.1. In my case though, I had to completely remove the power button from the device. The previous owner dropped it on its head, and I got it for free, unfortunately most of the top is missing, including the power button.
SO, on to how I did it. I took a paper clip (metal) and put it about 1cm down, slightly to the right of where the power button used to connect to the motherboard (in line with the text section of the Contact button on the top left of your XDA). Make sure you have turned your XDA/IMATE on before doing this. You'll find that when you find the right area, your device will turn off, or the screen will go dark (like holding the power button for a second or giving it a quick tap) or it will flash on and off.
If you manage to hold it there for the right period of time, while pressing the other bootloader buttons, then you will be able to enter bootloader.
This took me close to an hour to get just right, on both occasions I have done it, but it eventually worked and you eventually get quicker (5 minutes for me now).
My IMATE was useless without me updating the rom, so I had no worry about frying it if I did something wrong, that is why I was OK with playing around with its insides. BEWARE that you MAY DO DAMAGE to the device.
Good luck.
Here is the video.
http://www.youtube.com/watch?v=oWfcpC1VM5g
Cheers! Hope this helps some people out there get the most out of their Himalayas again.
JADEL
Wow!
I have seen the video but somhow I felt that whatever you wanted to show is not getting properly visible. Perhaps the illumination is not that much.
But, I ould very well see the c_shekhar's bootsplash screen. hehe
Thanks for the Video. Worked a treat! Now I can flash my XDA again. Yeah the video was a little dark but I got the jist of it anyway.
Glad it has helped someone other than me. Someone also left a comment on the YouTube page that it worked for them as well, which is also good. Our Himalaya's will live on for many years to come!!!
I agree with my video being too dark (Environmentally friendly fluorescent lights are good for environment, bad for how-to videos). I will try and make a new, lighter video next time C_Shekhar ports a new rom!
Power button
I'm from the philippines. I was able to have my XDAII power button repaired it didn't cost that much. If there are repair shops in your area, maybe you can ask about it.
chinister said:
I'm from the philippines. I was able to have my XDAII power button repaired it didn't cost that much. If there are repair shops in your area, maybe you can ask about it.
Click to expand...
Click to collapse
There are only two companies in Australia I know of that can officially fix our XDAs. They are bot hin Rockhampton (about 20 hours from where I live in Sydney).
They are both owned by the same company.
As you can imagine, I would predict that the repair cost would be very high, considering they essentially have a monopoly on the situation, and postage costs, insurance etc
I have a qtek 2020 with the key broken (it misses completely) power. can I perform your procedure?
Thanks
Catalogna
Hi there,
It is hard to say for sure. The only way to know for sure is to actually try it. This procedure has worked repeatedly (at least nine times now for me) on my Himalaya, and several other peoples. It really is a last resort though, so you may want to trry everything else you possibly can first.
Cheers.
good good good
I have put the qtek in bootloader and I now have the new rom. Thanks.
I have solo another problem: after few second what I don't use it the display goes to standby and I must press strong to reactivate it. is it a problem software or hardware?
Glad to hear you were able to flash the new rom.
As for the restarting, I have not seen that before under this ROM, and I have used it on several devices and tested it fairly thoroughly. Are you sure nothing is still stuck in the top of your phone where the power button was (IE you didn't leave the metal device in the top?) Perhaps something in there keeps shorting it out?
Maybe it is just on a short timeout. Check under Start>Settings>System>Power>Advanced
See what time the settings are set to under here for "Turn off device if not used for..." both on battery and external power.
Also, then click on the "backlight" button at the bottom, and check those settings.
Under "Backlight" click on "Battery power" and change the settings to what you want, then click on "External Power" and do the same again.
Then just hit the OK button (top right corner) twice, and you should be done.
Hope this helps.
Thanks!
Hi Jadel. I just want to say thanks! Your video help me deal with a broken power button when upgrading rom for the first time. Without your help, I would never feel like having a brand new phone for free
I also found a way to hard reset a phone without camera button (or record).
Just connect mtty via usb into bootloader, type:
password BOOTLOADER
task 28 0 0
and reset your device as normal.
In my try it corrupted my splash screen but anything other is okay
ROMS
Why on the HD2 do they make roms for SPL 1.4 when every FREAKIN PERSON on the PLANET has version 2.08 I have NO IDEA! STUPID!
Flashing rom
hi im from india and im using an imate ultimate 8502 mobile and unfortunately when i was soft resetting ma phone my phone was corrupt and it mholds in the boot screen itself whenever i restart my phone it stays in the blue sreen stating i mate it doesnt moves from it and boot loader cant be opened ive tried both the ways like holding power button & volume - key as well as holding fn and red button and reset key even both doesnt respond ive given my ,mobile to service to all of the servise centers in chennai but none of them cant service it can anyone help me out plzzzzzzzzzzzz...........
THANKS!
Hi to everyone in this forum. I've recently received as a present a new toshiba folio 100, but, since I'm experiencing an annoying menu button flashing, I've thought of it as a software problem so I upgraded the folio using the foliomod1.3c and applied the rotate patch and also the 1.3c fix patch. The menu still flash with no apparent logic. I've tried to kill all applications running and it's still there. It seem to come up and down at random. I ask to all in this forum: do you believe it's a hardware issue or is a software issue? Because if it's a hardware issue I'm going to try to have a new folio from toshiba. I'm overall very pleased with the work that Dexter made to make the folio an usable machine but this flashing is driving me crazy. I use the folio basically as a portable scientific pdf reader so I need to concentrate on what I read and this flashing is really annoying. I would like very much to thank you all in this forum in advance for all the suggestion/help you could provide.
use my "foliobuttons" app
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I have a request that serve All those who suffer MENU crazy button .
Is it possible to prepare application you can setting ON/OFF the MENU button
Most of the time useless button.
sometimes button jump after 10 minutes, sometimes after an hour
Usually I fix the problem by changing the settings with FolioButtons 1.1.
If you could add to FolioButtons on/off operation for menu Buttons was the best.
Hi teknoraver,
Can you add enabled/disabled menu button in foliobuttons application ?
flashing on...
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I am pretty desperate about this issue, because none of the methods seem to help...
Right now the buttons work opposite- Menu button flashes mad and none of the other 3 responds...dont know how it happened
Just a thought- while the folio is booting up the menu button ALREADY flashes! I have zero understanding in there but isn't it a process that loads / starts early in the line?
I appreciate everyone's effort trying to solve this bug as it makes this handy tool a useless pile of crap.
I was wondering how many folio users are suffering of this crazy buttons madness.
Mine was crazy from the very beginning; I sent it back for repair and toshiba only did a firmware restore... Nothing changed at all!
It makes my folio almost unusable!
bye bye crazy buttons
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
I think it's a hardware issue and even a build quality issue.
If i hold my folio at the side of the buttons, i get the flashing buttons problem (even the foliobuttons app will not help), if i hold it at the other side, i've got no problems at all.
Do you have an animated background? Because I saw that some people had this issue with an animated background...
Hi Mshr73, nice first post indeed
Could you post some pictures of what you did?
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
seems to get better...
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
vietnamibalzsam said:
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
Click to expand...
Click to collapse
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
I just tested without thickness under the screen, with foliomod 1.4 and after a few hours I again the problem of crazy buttons.
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
Well, I just finished dismantling e reassembling my Folio. Following your hint, I cut a piece of paper and put it between the audio connector and the back of the screen (yes, it was metal vs metal). I'll see whether it's gonna work or not. Crossing fingers for now.
Not that I'm so confident in leaving a piece of paper stuck right where the DC input is .
BTW, did you try with a smaller thickness? Even if this is the problem, I'm wondering whether a piece of paper would be enough or not.
thyself can someone. post pictures of before and after details?
we will be much appreciated
i didn't have the crazy buttons issue this far in 2 weeks, just my home butten needs to be pressed harder. I'm pretty sure it's hardware related, i read often that users experience it when changing from an warm room to a colder one, or in regions where its verry humid(some circuit closes maybe...). so Mshr73 is on the right way as far as i can tell.
Dexter's 1.4
^Sbk79^ said:
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
Click to expand...
Click to collapse
Really sorry mate, I hope it will solved this for others too...
Anyhow, it is so disturbing, that I was already considering to send the tablet back to Toshiba...
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Mshr73 said:
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Click to expand...
Click to collapse
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
^Sbk79^ said:
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
Click to expand...
Click to collapse
Well ... with a piece of paper the problem Come back.
I handed a piece of cardboard and the problem disappears.
I think that to raise the screen to solve them but I'm still not 100% sure.
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Not mine....
dmcduck said:
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Click to expand...
Click to collapse
work on reseating the back shell of the phone, i had the issue too at first and i thought it was a defect, but i played with it a couple times and got it to work like a normal power button
Nope not at all, I actually have to press it more than once sometimes and harder the second time for it to work......
yea mine is a lil sensitive...cant have it my pocket because of it..pulled it out a couple times and the phone bouncing around in my pocket opened apps and almost called ppl
Throw an OtterBox on there....
you have to give it a little lovin- WON"T happen by accident.
Also - saved my3D from a nice 5 foot drop courtesy of some Crazy 3 yr olds on the 4th.
mine is like that and I hate it!!!
U guys have cases on the phone? I guess not
Sent from my PG86100 using XDA Premium App
I actually find the new power button a little bit better to my liking, a lot easier to find in a blind poweron. But I do agree that it might be a little too sensitive. I've found that the phone turns itself on while in my pocket - which is a bad thing because on shake the led flashlight turns on lol! Of course that kills the battery...
Also when trying to turn on or off... sometimes i see the turn off, reboot menu pop up which just simply put, never happened with the evo og. And while i like the ease of use and how fast it reacts to turning off/on, it seems to be a bit of a problem ATM
not not at all sensitive. it's actually under sensitive. some time i get frustrated because i have to push it so hard in the exact sweet spot just to get it to turn on. after having it for over a week now it's getting better, but at first i couldn't even get the thing turned on.
Not mine in fact mine is kinda hard to push. I'm going to the Sprint store I bought mine from this weekend to see if I can get it switched out because I have light leaking through the ring that surrounds the search key, and it bugs the hell out of me lol. So I hope my new one is gonna be normal.
This happens to me with or without the case. I did have a very brief time where the power button would not respond at all, and discovered that the back was causing it (I had swapped the OEM 8G card for my 32).
I don't think this is a big enough problem for me to try and swap the phone out, although it is a little annoying. I suppose in time I'll learn not to push the power button too long.
I have the same problem with the sensitive power button but I'm on a Samsung Galaxy S. I'm wondering if there is dust in the way... Anybody ever find a fix or diagnose the problem for this? I've seen the same problem across multiple devices on the forums so I am starting to believe its a wear and tear type of thing.
Mine is kinda sensitive. But not as sensitive as the one I saw at my local sprint store. Interesting how it seems like no two EVOS are the same.
Good thing though is that since the button is built into the backcover... Maybe picking up another one can deliver a more sensitive/stiff experience.
Sent from my PG86100 using XDA App
Hello everyone,
i need your help in a dillema. the background story started yesterday, when i washed my hand and tried to reach something over the sinc, the phone dropped from my jacket pocket to the sinc, drowning... :crying:
i took it within a second, of course completely wet.
i opened it completely, seperating the board, battery, speaker...taking everything out.
to be honest the main damage was the speaker. the entire board seem to be dry and the water sticker remained untouched.
after some rice-treatment and patient i turned it on.
the home button is non-responsive..only after some clicks it works.
the power button is another issue, where if i press it it thinks its a long press and a short time after (could be minutes) it reboots.
if i dont touch the power key it wont shut down is it has to be it.
i kinda hate the idea to change phone because i actually like it.
i dont see any other option at the moment (wouldnt want to go to larger screen size)
so i have a damaged speaker, home & power button.
the speaker is replaceable, thats for sure. after all, i could disassemble it completely.
what about the other keys? is it a possible operation? if i need to solder things that wouldnt be the case for me...i dont have proper equipment.
i saw the spare parts for couple of bucks, im just not sure whats possible and what not.
i wouldnt go to a lab because that will cost alot, and im not sure if it worth it.
Hey,
I'm new to these kinds of things like forums and stuff like that, so sorry if I'm not that clear with what I'm saying. If I could also get some criticism on the post itself and how I can improve, it'd be a great help!
I've had this phone since November of 2013 and this is my first time encountering this problem. After getting home from school, I took my phone out of my backpack and tried waking it(simply pressing the power button so I could see the lock screen), then I noticed nothing would happen. I tried again and again then noticed that the 3 "buttons" at the bottom of my phone were lighting up when I unlocked it, and disappear when locking it. Once I unlocked it, I was able to turn the volume higher and lower, listen to music(because I remember what the layout looks like before it had a black screen), and even (somewhat) use apps. Every time I hear my phone ring, it really makes me want to punch it, because I know that the phone itself is working, but just the screen won't turn on. Like even when I registered for xda-developers, my phone rang once I got the e-mail to verify my account.
I looked at a bunch of other threads before creating this one. Some said to hold down Power Button, Volume +, and Volume - for 30-60 seconds. I tried doing this multiple times, each time holding down the buttons a different amount of seconds, and nothing happened. I let the 3 icons at the bottom blink 15 times, wait a few seconds, let it vibrate, then let go. The longer I held the buttons, the more it would vibrate(about one vibrate for every 15 seconds). I hear the sound effects when turning it on and off("Droid" in the robot voice, then followed by some weird robot-sounding noises). Some people just said to let it charge, and I also tried that. Nothing happened, really, it just charged.
I've been thinking of letting the battery die out, but who wouldn't think of that? So I just ditched that idea. Tell me if I should try it, though, please.
My phone's pretty beat up, but nothing to the point where some parts of the screen would stop working, just two pretty big cracks on it. Sorry, I can't post pictures 'cause I'm new > <
If you guys could help me out with this, or just tell me if it doesn't work at all, it'd be a great help.
Thanks,
Joseph
Sounds like the LCD has been broken.
es0tericcha0s said:
Sounds like the LCD has been broken.
Click to expand...
Click to collapse
That sounds pretty simple. Would I need to replace it, get a new phone, or fix it myself at home?
ijosepham said:
That sounds pretty simple. Would I need to replace it, get a new phone, or fix it myself at home?
Click to expand...
Click to collapse
I would replace the screen. Whether or not you want to do it yourself depends on your confidence, experience, and tools. If you've never torn a phone apart before, then you might want to find a friend who is handy or go to a shop because HTCs, in general, are not the easiest things to start with. And you'll definitely want to buy the already pre-assembled LCD+Digitizer combo as trying to separate the 2 would be more hassle than it is worth.
http://www.repairsuniverse.com/htc-droid-dna-repair-guide.html