Hello! I have unlocked BL, and I installed the mysense-dx rc 3.5 on my DX, with the attached kernel.
Yesterday, I try to flash mysense-dx5 rc 4.0, without the kernel. I wiped, flashed the ROM and after the HTC logo, it shows a black screen. I didn't flash the kernel attached to mysense dx 5, I used the rc3.5's kernel. The same happened with InsertCoin, too. The problem is with the kernel? But they wrote, these ROMs shuld work on every kernel. Can it be another problem?
Are you S-ON or S-OFF? Probably S-ON. If so, flash the kernel manually. Take the kernel (boot.img) out of the ROM-zip. Use the search on XDA to find out how to flash with fastboot.
But they wrote, the mysense dx5 shuld work on every kernel. So why it doesn't work on rc3.5's kernel??
Sent from my HTC Desire X using XDA Free mobile app
Just give it a try, as suggested. I still don't know if you are S-ON or S-OFF. What HBoot version do you have?
I'm S-ON and I have JB bootloader(1.25xxx)
Sent from my HTC Desire X using XDA Free mobile app
Then the solution for you is to flash the kernel manually because of S-ON. Again: to start, best is to flash the kernel which comes with the ROM.
Maybe the problem is that you use an ICS kernel (v3.5) for a JB ROM (v.4)
Thanks. But if I take a nandroid backup from my current rom and my current boot, than flash the sense 5 ROM and the kernel and i don't like the new ROM, can I restore the previous ROM and the boot? Sorry for stupit questions, but i restored the system a lot of times, but I'm not sure I can restore the boot, because S-ON. Can I restore?
Sent from my HTC Desire X using XDA Free mobile app
You can restore the ROM-image. I don't remember well if the kernel gets restored also. Most of the time I flash the kernel manually. If you are on JB, use JB-recovery and JB-ROM/kernel.
Advise: stick to S-ON and learn to use fastboot-command for flashing kernel. It is just 1 DOS-command, clean and safe. Don't mess around with old software which tells you that 'it is very easy to use'.
Interesting forum: this one and this one, read #5.
RuudM said:
You can restore the ROM-image. I don't remember well if the kernel gets restored also. Most of the time I flash the kernel manually. If you are on JB, use JB-recovery and JB-ROM/kernel.
Advise: stick to S-ON and learn to use fastboot-command for flashing kernel. It is just 1 DOS-command, clean and safe. Don't mess around with old software which tells you that 'it is very easy to use'.
Interesting forum: this one and this one, read #5.
Click to expand...
Click to collapse
Thanks, I flashed a JB kernel and it worked, but i didn't like sense 5, I restored the mysense-dx rc3.5 ROM, but thanks for the solution:good:
Related
Here's the stock kernel from software ver 1.13.651.7, flashable through recovery, of course.
Thank you.
Sent from my PG86100 using XDA Premium App
Thanx for this.
Sent from my PG86100 using XDA Premium App
Finally! Thanks man!
Wow thanks.
thanks.........
Thanks dude. Not sure what I did but my battery started discharging crazy fast this morning, I had to switch back to stock.
[Kernel] Modified Stock 2.08.651.2 (2.6.35.13-g84f8edd)
Adding new kernel to new post.
Good looking man. Thanks.
Locked & Loaded
" Shooter on Deck"
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Dudemeister said:
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Click to expand...
Click to collapse
Do you have hboot 1.5? Just asking because there are ~2 more steps to take before flashing a kernel... Or I heard you can use Flash Image GUI.
Sent from my Infected EVO3D! Virus, you rock!
I flashed a AOSP kernel, and my rom didn't load. so I restored a backup and my wifi didn't work and also. So i flashed this kernel and now my backup doesn't work or even any rom that I have downloaded.
using viperrom before.
now nothing is working
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
im getting really sick of this evo3d.
TheFlatulentFox said:
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
Click to expand...
Click to collapse
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
SteelH said:
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
Click to expand...
Click to collapse
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
TheFlatulentFox said:
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
Click to expand...
Click to collapse
Someone correct me if I'm wrong, but I'm almost positive this kernel is WAY outdated (note the date of the OP)
all sorts of members have been posting that they have hboot 1.50 with dev unlocked and are easily flashing ics sense 3.6 roms without installing the virgin mobile firmware.. i havent had such luck... and i cant figure out why. i have tried both the fastboot bypass method and also buying the EXT4 recovery and installing through that as well....nothing works....rom boots up and one the setup screen comes on ...it freezes and boot loops .... can some one that has flashed the new sense roms with hboot 1.50 please help me ...and tell me what ive missed or done wrong...
Same problem here, been told I need to downgrade hboot to 1.4 and s-off...too much of a noob for that! Lol
Sent from my PG86100 using xda premium
I had the same problem as you guys. Try flashing the rom and chad's ics leak kernel in 4ext recovery and see if that does it. This worked for me.
thanx
bsharp8 said:
I had the same problem as you guys. Try flashing the rom and chad's ics leak kernel in 4ext recovery and see if that does it. This worked for me.
Click to expand...
Click to collapse
+1 worked for me to. I had to fastboot into recovery first then flash the rom and then the kernel.
http://forum.xda-developers.com/showthread.php?t=1639471
Flash your rom of choice, flash kernel, enjoy. Chad is the ****.
ncfastls1 said:
http://forum.xda-developers.com/showthread.php?t=1639471
Flash your rom of choice, flash kernel, enjoy. Chad is the ****.
Click to expand...
Click to collapse
Is there something similar for GSM?
i have am s-on evo 3d gsm...I want a rom with very good battery life and 3d...i hear cool ics has good battery with 1.9 kernel...
Basically my question is how can i do everything like flashing kernel n all other things on my s-on device..
Also i have 4ext recovery..
You need to flash new firmware, and I believe you can't unless you are s-off
Sent from my HTC EVO 3D X515m using xda premium
flashallthetime said:
You need to flash new firmware, and I believe you can't unless you are s-off
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
i'm s-off gsm and i'm using cool ics with kernel.
here is the quote from pop2003;
pop2003 said:
Hello, i had the same problem as u do. But cool ICS has saved me. I have installed Cool Ics V11 and have his kernel V1.7. Also I`m s-on, unlocked by htc dev. Just follow his instruction how to install the rom. When u finish with installing the rom u need "flash image GUI" app that u will use to flash the kernel. u can find the post about it but its not complicated to use. When u finish that u can use "System Tuner" or "System Tuner pro" to configure your system performance... I de-clock-ed my cpu a bit, set minimum freq to 192 mhz loaded the Gov. that says powersawer; all that u can finde whan u click on cpu icon... u can experiment and see what is the best for your usage....
cheer
Forgot to add: I use g-talk, whats-app, instagram, always on (facebook, g+, twitter and Voxer) battery life for me is 14-15h, when i dont use my phone that much battery life is around 2d+
Click to expand...
Click to collapse
you can find "flash image GUI" app at Google Play Store for $0.99
invince2 said:
i have am s-on evo 3d gsm...I want a rom with very good battery life and 3d...i hear cool ics has good battery with 1.9 kernel...
Basically my question is how can i do everything like flashing kernel n all other things on my s-on device..
Also i have 4ext recovery..
Click to expand...
Click to collapse
Hi, I`m also s-on, unlocked by htc dev and have a bit old Firmware. Cool ics works for me. I flashed the v11 rom, got boot loops,tried to fix them by flashing boot.img via fastboot from v11 rom and it did not work so i tried to flash boot.img from v7 rom and it worked i`m telling you all this because it may happen to you just in case to be prepared if u decide to flash. when you install the rom then you need "flash image gui" to flash the kernel. It is easy to use. Cool rom has good battery life...
Cheer
Hey there bulutbeyaz ... also kernel v1.9 is great
pop2003 said:
Hi, I`m also s-on, unlocked by htc dev and have a bit old Firmware. Cool ics works for me. I flashed the v11 rom, got boot loops,tried to fix them by flashing boot.img via fastboot from v11 rom and it did not work so i tried to flash boot.img from v7 rom and it worked i`m telling you all this because it may happen to you just in case to be prepared if u decide to flash. when you install the rom then you need "flash image gui" to flash the kernel. It is easy to use. Cool rom has good battery life...
Cheer
Hey there bulutbeyaz ... also kernel v1.9 is great
Click to expand...
Click to collapse
eh i paid for this, anyway worth it my phone is very stable and have last long battery now.
You can find flash gui free, newer roms require new firmware thats why you had boot loops on cool version11
Sent from my HTC EVO 3D X515m using xda premium
flashallthetime said:
You can find flash gui free, newer roms require new firmware thats why you had boot loops on cool version11
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
Yeah i thought as much, but when you are s-on and there is no hope to get s-off ( tried many ways and only bricked my phone)... you try crazy things .. now v11 works with flash-ed boot.img form v7 and i don`t want to touch anything
invince2 said:
i have am s-on evo 3d gsm...I want a rom with very good battery life and 3d...i hear cool ics has good battery with 1.9 kernel...
Basically my question is how can i do everything like flashing kernel n all other things on my s-on device..
Also i have 4ext recovery..
Click to expand...
Click to collapse
I am using Cool-ICS since I find it the only most complete ROM without any major bugs. Its kernel v1.9 has just been released and I can vouch for it that the battery life has only become better. You don't need to be s-off to install this one. Just update your phone to the latest hboot and firmware, unlock it via HTCdev method (that's actually the easy method and which I used as well). Download the Cool-ICS ROM and its latest kernel separately. Do a nand backup in 4ext. Use super wipe (optional) to wipe everything. Flash the ROM first and after booting up first check the kernel version. Then go into recovery again and flash the latest kernel for the ROM.
Cheers.
For the past week or so, I have been looking through this forum and looking for a solution. I have tried many but all have failed. I tried to flash the custom rom Energy but it won't load. I originally had stock Wind ICS rooted using hasoon's all in one tool.
EDIT: I fixed my phone by flashing a kernel but I don't understand why that worked. I was trying random stuff. If possible, can someone explain this to me why this might have fixed it?
Are you s-on? If so then that is why. If you are s-on then you need to be using 4ext recovery with smartflash enabled. Using any other recovery will not flash the kernel when you flash the Rom unless you are s-off
sent from my
NRGized amaze
powered by Faux
if you are s-on i would recommend that you s-off your phone and supercid it so u can use the t-mobile roms, but yes you should be using 4EXT if you are S-ON to flash roms, if your stuck at the boot screen as long as you can get into recover there is hope.. just flash a different rom or relock ur bootloader and return to stock following one of my posts in this section about returning wind mobile to stock, if you need any further help just let me know
HELP
Ninjistix said:
if you are s-on i would recommend that you s-off your phone and supercid it so u can use the t-mobile roms, but yes you should be using 4EXT if you are S-ON to flash roms, if your stuck at the boot screen as long as you can get into recover there is hope.. just flash a different rom or relock ur bootloader and return to stock following one of my posts in this section about returning wind mobile to stock, if you need any further help just let me know
Click to expand...
Click to collapse
i need help I have the htc amaze also and when I go into 4ext recovery no matter what I do everytime I reboot it frezzes and s is on
okay i understand your having a problem, but your missing some important information, what carrier are you on.. and what rom are you trying to flash..?
HTC Ruby Stuck & Restart
Ninjistix said:
okay i understand your having a problem, but your missing some important information, what carrier are you on.. and what rom are you trying to flash..?
Click to expand...
Click to collapse
dear all.....Plz Help.
My HTC Ruby is on Stock Rom Gingerbread... i try to install CM10 on it through 4EXT S-On.....But when i flash CM10 on it the phone display appear after CM logo...Language Selection appear when i touch the screen Phone Hang and the restart after 1 or 2 mints. The i tried other custom roms on it (i-e Revolution HD) but it stuck on HTC logo or if i try any other source of CM10 same hang & restart happened.
Now my phone is useless its even not getting stock RUU.......HELP
aliamankhan said:
dear all.....Plz Help.
My HTC Ruby is on Stock Rom Gingerbread... i try to install CM10 on it through 4EXT S-On.....But when i flash CM10 on it the phone display appear after CM logo...Language Selection appear when i touch the screen Phone Hang and the restart after 1 or 2 mints. The i tried other custom roms on it (i-e Revolution HD) but it stuck on HTC logo or if i try any other source of CM10 same hang & restart happened.
Now my phone is useless its even not getting stock RUU.......HELP
Click to expand...
Click to collapse
I guess it's because you're lacking the ics firmware.. Flash a GB rom then you'll have a working rom.. You can't flash any ICS, JB rom without upgrading to ICS firmware.. Refer to AJ's ics upgrade thread in general section if you're feeling like upgrading your firmware from GB to ICS
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
First to clarify, i have an "unbranded" (asian) HTC Amaze (which is also known as HTC RUBY).
I'm on stock ROM 2.3.4 and it is un-updatable officially.
So... I unlocked my bootloader, then i installed 4EXT recovery, then i S-OFFed my device (which somehow locked my recovery again), then i rooted it.
Now, when i flash a custom rom (Cyanogenmod JB 4.1.2 official), it gets stuck on the boot screen (the rotating cyanogenmod logo).
I have backed up my rom in the recovery, so i can restore it and get back to where i was.
Basically i want to know what I'm doing wrong or if I've missed an step.
I haven't Super-CID it yet, is it really necessary? And i also can't seem to update my hboot, but isn't 4ext supposed to do that for me?
You forgot to install the ICS firmware. You can't install an ICS ROM while on Gingerbread. You need to first upgrade to ICS, then you may start flashing ROMS.
This thread has it, and all of what you need.
http://forum.xda-developers.com/showthread.php?t=2167596
If this has helped you, use my thanks button.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
SuperAfnan said:
You forgot to install the ICS firmware. You can't install an ICS ROM while on Gingerbread. You need to first upgrade to ICS, then you may start flashing ROMS.
This thread has it, and all of what you need.
http://forum.xda-developers.com/showthread.php?t=2167596
If this has helped you, use my thanks button.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Oh... So according to the article, i just download that ROM, rename it to PH85IMG.zip and flash it via bootloader.
After that i should be able to install any ROM i want right? Including the Cyanogenmod JB 4.1.2 one?
----
Oh and just to update, I've also updated my bootloader to the latest 1.93.2222 one. Working all fine.
I've also run the SuperCID batch script, and it seemed to work, but It isn't showing any CID status on my bootloader. Maybe it will once i flash the ICS ROM on it.
HURRAY! It worked. I'm using the T-Mobile ICS ROM right now without any issues. I think I'm going to stick with this for a while before i try the Cyanogenmod 4.1.2 one.
Thanks a lot Afnan dude, your one short reply was enough to solve my issue. Haha