Hello, Can someone provide me with a stock recovery image for a LG L9 II / D605?
I bought a new phone and I'm trying to return this one to factory state and sell it (the buyer probably wouldn't be angry for CWM, but there is still about half a year of warranty and I'm afraid they can reject it because of that), I tried looking for it on Google and XDA, but didn't found anything apart of CWM and TWRP.
Flash a stock .kdz from LG
http://lg-phone-firmware.com/index.php?id_mod=37
V10 is JellyBean, V20 is KitKat. Make sure you download the proper .kdz for your country/region/carrier.
Use this guide to flash the stock firmware.
App is crashing
Thank you for the response, tried flashing with this program, problem is that it keeps crashing after extracting the file (tried both OpenEU and POL files with same results), tried installing all C++ libraries and installing new phone drivers, running as admin, nothing helps. Tried even normal flash instead of CSE, but then it displays an error with communication between phone and PC. Here is a crashlog, it's in Polish, but it isn't a problem probably:
Nazwa zdarzenia problemu: APPCRASH
Nazwa aplikacji: LGUserCSTool.exe
Wersja aplikacji: 1.7.2.0
Sygnatura czasowa aplikacji: 530e9702
Nazwa modułu z błędem: LGUP_L9II.DLL
Wersja modułu z błędem: 0.0.8.0
Sygnatura czasowa modułu z błędem: 53216475
Kod wyjątku: c0000005
Przesunięcie wyjątku: 0002d4ad
Wersja systemu operacyjnego: 6.1.7601.2.1.0.256.48
Identyfikator ustawień regionalnych: 1045
Dodatkowe informacje 1: 0a9e
Dodatkowe informacje 2: 0a9e372d3b4ad19135b953a78882e789
Dodatkowe informacje 3: 0a9e
Dodatkowe informacje 4: 0a9e372d3b4ad19135b953a78882e789
Can you or someone help me with crashes or give another program to flash the .kdz? Tried downloading flasher from this thread, but the box.com site says 'The user hosting this content is out of bandwidth.'
Hi,
I'm a new user too here, I was struggling last few days to flash correctly kdz file on my D605 and I had a lot of app crash/connection errors that couldnt allow me to flash my phone.
Today i tried copy all my folder with all my files (dlls, win enabler, KDZ_FW_update..) onto my laptop with Win8.1.
I could succefully make it (after a couple of tries), then because I was flashing stock JB from KK i got bootloop but with a hard reset everything was fine!
With KDZ_FW_update I didn't had the LG software coming up and asking to unplug and reset my phone, it just started rewrite Wparam and Lparam by itself and after a while the process is complete.
You can find those files on the official thread of this phone (or google)...
Hope I could help you, and thank to this fantastic community working hard for us! :fingers-crossed::fingers-crossed:
Related
Hello, I have a phone LG L4 II (e465g) I made a flash ROM program with LG Mobile Support Tool. Instead of placing the company ROM, place a generic.
The phone then lit that perfectly. You remove the battery to insert the SIM, not lit anymore.
1) DO NOT ENTER DOWNLOAD MODE
2) detects and much searching, I managed to detect it as "MTK USB PORT"
3) I try to flash it with SP FlashTool, the issue is that I have some files.
4) Reading out there I was told that my problem was to change the rom, without unlocking the bootloader.
In this program need a rom say all unarmed. Thing that this phone is a KDZ file, decompress still trying different ways, I can not get the necessary files.
I need a rom of this phone that has the PRELOADER, DSP_BL, and their respective scatter.
Supposedly this backup is done with another application called DroidTools.
Taking the backup of the rom with those files only, I think I can recover all the phone and start again detect and enter download mode.
If anyone has this rooted phone and can make a backup of your phone and spend those 3 things, I would be of tremendous help.
Should get a scatter MT6575 is a micro of this cell.
Many thanks and sorry for my English.
do you fix your phone because i have same probleme
Hello guys,
I am new to the forum, please don't blame me if I put it into wrong section.
... so, my problem is that I've clicked to install update, Android prompted me to do it. It has downloaded some Doogee files, rebooted phone, then was trying to install the update.
It has failed (there was Android error icon). Now my phone does not start, it's frozen on the Doogee intro.
I've bought my phone from Coolicool, but asked Doogee directly what should I do. Each time I ask they send me some incomplete instructions, broken links to flashing procedure. Half of that stuff is mixed chinese with poor english. I've tried my best to understand it, but failing consistently.
Could anyone help me with reflashing procedure for that phone?
Much appreciated.
Here is instruction from them:
"Dear customer
It's appears that you should acknowledge the steps about upgrading,you could follow the next tips:
1:this upgrading must be process with USB connecting;
2:installed the correct drivers to your computer;
3:installed the update tools and insert the update files to the slot of the updates tool(you need to download the update files in our website);
4:there will be correct example of a picture to shown the sucess upgrading.
There will a files which contains the driver、update tools、tutorial guide、Flash video,Check the attach under the below.
Best regards"
Here are files from them:
从Foxmail发来的超大附件
SP_MDT_exe_v1528.00(After-Sale_Service_Center)for all the platform.doc (1.6 M, 2015/9/25 15:41:38 到期)
进入下载页面：ttp://mail.qq.com/cgi-bin/ftnExs_download?k=0739396263d284cdf09198f94536531d555b0b56550603004c0a0d53571b5503590014035b02031f575f0c500504560007080a5263196161316674263769044a04664f535604591c51091123054204404c6a580e06693257134f50010669221c4f1717060c55610f156e&t=exs_ftn_download&code=a99bc6a2
Driver_Auto_Installer_EXE_v5.1453.03.zip (18.6 M, 2015/9/26 10:25:43 到期)
进入下载页面：ttp://mail.qq.com/cgi-bin/ftnExs_download?k=6e3637361b7be2cca09e96ad1162061d55520250510407501c520e00514f005301041a575304571f030405050552075104075554374a3476435f4153453d75474559687f591140535d5a524468276c776e400218065601011f0604184d0b44320c4260&t=exs_ftn_download&code=16767b42
烧机软件1516.rar (107.5 M, 2015/10/17 14:25:03 到期)
进入下载页面：ttp://mail.qq.com/cgi-bin/ftnExs_download?k=243261337484779bf29ac0a84035024d53535555530c05544e5353505018040654504c0a0053554f000600565201540752045900662530abb6899bfb8b89ce535603571d145442625e4636&t=exs_ftn_download&code=c2a3f50b
Flash phone.zip (89.2 M, 2015/10/17 14:25:49 到期)
进入下载页面：ttp://mail.qq.com/cgi-bin/ftnExs_download?k=723138378e2a54cca59999ac13390b1900570e55060809521904595156140d025509155500015c1b07020c5153585c5506035a0e3536397058504b5f154951595a54164d5c49390b4066&t=exs_ftn_download&code=41875996
Note: removed H from the beginning.
Anyone can help please?
Hello,
I've got a LG L5 II that is stuck at LG screen. This happen because maybe I've deleted the update of google apps in order to have disk space left.
I've done a lot of research before posting a new thread but now, I ask for your help.
Useful Information :
LG L5 II E460, firmware stock, not rooted, firmware V10F
Try on USB 3.0 and USB 2 with cable microUSB -> USB because computer is an ASUS Transformer
Connection information in device manager :
Normal boot : MT65xx Android Phone
Download mode : LG AndroidNet Phone
Recovery mode : Android laying on the floor with red exclamation mark but nothing happen.
Guide used and results :
Official LG method :
Power on : when connected, still waiting for connection in the LG Update window
Download mode : Connection OK but when trying to upgrade from recovery, failed @ 4 or 5 %, phone disconnected
LG Flashtool 2014 :
Download mode : failed @ 4 or 5 %, phone disconnected
TOT Method: Unable to find TOT file but trying with bin and dll from kdz firmware
Download mode : Error at step flashing SCI.
If possible, I'd like to do a normal flash without losing data on the internal. I know I can do it but I need your help, please
If more information wanted, do not hesitate to ask, I'm trying to be the more accurate possible. Sorry for my English, it''s not my native language.
Thanks
I'm trying to get the tot file from my firmware KDZ.
Extracting KDZ give me DLL and bin file.
I don't know what to do with this bin file. Is it possible to convert it in tot file ?
Thanks
Midask said:
I'm trying to get the tot file from my firmware KDZ.
Extracting KDZ give me DLL and bin file.
I don't know what to do with this bin file. Is it possible to convert it in tot file ?
Thanks
Click to expand...
Click to collapse
any luck on recovering, im suffering the same. but i formated my system and now when i flash kdz the phone boots but goes to an android guy with a red triangle over its tummy
Hi !
I was hoping an answer but it isn't the case.
I'll try to help you, I've spent a lot of hours to recover my phone.
Try to follow this How-to :
http://forum.xda-developers.com/showthread.php?t=2409308
-----------------------
About my problem, I think I don't have any possibilities. Even a factory reset fail.
USB debugging not activated --> Trying by ADB --> ADB need to install Superuser.apk in /data/local/tmp --> This directory has been erased because I've tried a complete flash and all my data are gone but my phone is still bricked.
Trying to Root to flash recovery --> USB debugging not activated --> Unable to root my phone
KDZ Updater fail (maybe because of USB debugging not enabled ?)
I think I'm f**ed (sorry for this bad word but I don't see any possibilites ...)
----------
Dear mudster, if I can help you, I will do my best
Midask said:
Hi !
I was hoping an answer but it isn't the case.
I'll try to help you, I've spent a lot of hours to recover my phone.
Try to follow this How-to :
http://forum.xda-developers.com/showthread.php?t=2409308
-----------------------
About my problem, I think I don't have any possibilities. Even a factory reset fail.
USB debugging not activated --> Trying by ADB --> ADB need to install Superuser.apk in /data/local/tmp --> This directory has been erased because I've tried a complete flash and all my data are gone but my phone is still bricked.
Trying to Root to flash recovery --> USB debugging not activated --> Unable to root my phone
KDZ Updater fail (maybe because of USB debugging not enabled ?)
I think I'm f**ed (sorry for this bad word but I don't see any possibilites ...)
----------
Dear mudster, if I can help you, I will do my best
Click to expand...
Click to collapse
thanks bro we need more people like you in the world
I am going nuts. The recovery crashes at 4 - 5%
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.
Hi good people, this is my first post since I don't know where else to go.
My phone Vivo V7+ received an OTA update, so I downloaded and installed the updates, but after updating my phone now can't detect SIM card, I tried many different good SIM but still can't be detected.
I tried factory reset but failed, can't revert back to old firmware.
So I spent many hours of researching and watching YouTube tutorials and I tried to flash stockrom via QFIL. First I encountered problem going into EDL mode (which I spent hours of researching too) but solved it by shorting pinout at the back of the phone.
My laptops detect my phone qualcomm 9008 COM3, downloaded two V7+ stock rom and when I tried to flash via QFIL it will always give "Sahara Fail".
Some methods I tried;
1. Putting firmware at bin folder
2. Renaming folder into shorter name
3. Click download fast as soon as phone gets into EDL mode
4. Tried unlocking bootloader via adb but failed
5. Turn on airplane mode in laptops
Hopefully someone can help , thanks.
Anyone? Help? Now i lost my IMEI and i don't know what is the original number
While probably flashing wrong files you wiped baseband data .
To fix your imei you will need this QCN file which you can download from here:
https://mega.nz/#!YZx3hLgJ!RAj-f8X9de_vtQa1xlhRMN-oWw_YEuPwAs9UuwaT0CA
Decrypting key : !RAj-f8X9de_vtQa1xlhRMN-oWw_YEuPwAs9UuwaT0CA
Password: [email protected]
Credits: https://ufixers.com/u/hariichha
Download this tool and replace your Original imei : ( original imei you will find on your original box)
https://download2267.mediafire.com/bc4ykbffhlxg/euosvxp285tr473/QualcommIMEIRebuilder.rar
Example how to use:
https://www.youtube.com/watch?v=GFB0lrzFHtY
Good luck
Thanks @Teddy Lo for replying. All I did was followed the steps how to flash stock rom and I did downloaded the rom of the same model. But the steps that are floating around are not in great detail. And many YouTube tutorials are not in English almost 99% are in Hindi.
After my attempt of flashing I lost my IMEI and I don't have the box anymore (threw them away long time ago, lesson learned).
I guess I need to visit the nearest Vivo service centre for repair.
Thanks again for replying and providing necessary links.
Hi , why you give up so easy ?
1. Download this firmware :
https://www.mediafire.com/file/1f5r...xx.0_msm8953_split_Repairmymobile.in.rar/file
Once you downloaded extract to Desktop ...
2. Now , Run Qfil tool with Administrator and insert each files to right places .
See image bellow
https://ibb.co/09Fb9k5
Select just the way I marked it in the picture!
Let me know if you fixed or not ...
Wow thanks @Teddy Lo for replying.
Why am I giving up? Maybe because I scouted forums and YouTubes for hours and day, and when I tried it on my Laptop it keeps giving the same error over and over.
The big problem now is that I lost my original IMEI (whis is stupid of me not talking note of it before doing anything else), and I threw my box long time ago.
I'm gonna try the link you gave me and let you know how it goes. Thanks.
Hi @Teddy Lo, so I tried flashing again and I didn't get "Sahara fail" this time but instead I got "Firehose fail".
Oh well guess I'll be visiting Vivo .
Thanks again.
SOLVED.
I went to Vivo service center and told them to wipeout everything and downgrade firmware to the previous version and they did it in 20 minutes.
Now my phone is working normally and they got my IMEI back.
Admin please close thread.