After installing nethunter twrp says no os installed and i get a bootloop whenever i wanna start the OS. Dirty unicorns Rom works fine. Suggestions?
you must install a rom first, aosp or cm, I have tried aosp and did not have much luck, cm13 worked best
make sure have correct vendor image before flashing roms
go here for instructions Thread: (BETA) Kali Nethunter 3.0 alternate installer
I got it to install and all seemed to be working, something went wront when I started updating and installing chroot packages.
Related
Unlocked my Bootloader recently.
Flashed almost all the best ROMs available. But can't get root access in any of them except Resurrection Remix. The root access on RR works coz it is prerooted and needs a small addonSU to activate it fully. Coutresy of LineageOS/CyanogenMod.
Magisk would give out "Cannot mount /vendor" "Error:1". I tested it on all the latest builds of all the ROMs(AOSP, AOiSP, dotOS, Cardinal etc..)
Tried flashing Magisk versions out there including the treble version of the beta. Also tried the flashing 'boot.img' trick. Still the same thing shows up.
My device : Redmi Note 4 SD
Recovery : Redwolf/TWRP(tried with both of them)
Has anyone been experiencing the same issue??? Has anyone figured out a solution??
Also, RR also seems to give out the same error when flashing Magisk. When I installed Titanium Backup, it said I have 16 cm-SU installed. Can't find a way to uninstall or remove it either.
uncannyjish said:
Unlocked my Bootloader recently.
Flashed almost all the best ROMs available. But can't get root access in any of them except Resurrection Remix. The root access on RR works coz it is prerooted and needs a small addonSU to activate it fully. Coutresy of LineageOS/CyanogenMod.
Magisk would give out "Cannot mount /vendor" "Error:1". I tested it on all the latest builds of all the ROMs(AOSP, AOiSP, dotOS, Cardinal etc..)
Tried flashing Magisk versions out there including the treble version of the beta. Also tried the flashing 'boot.img' trick. Still the same thing shows up.
My device : Redmi Note 4 SD
Recovery : Redwolf/TWRP(tried with both of them)
Has anyone been experiencing the same issue??? Has anyone figured out a solution??
Also, RR also seems to give out the same error when flashing Magisk. When I installed Titanium Backup, it said I have 16 cm-SU installed. Can't find a way to uninstall or remove it either.
Click to expand...
Click to collapse
I think all the ROMs you listed are Treble ROMs. They require a special Treble version of Magisk which is usually linked in the ROM threads
Noter2017 said:
I think all the ROMs you listed are Treble ROMs. They require a special Treble version of Magisk which is usually linked in the ROM threads
Click to expand...
Click to collapse
I tried the treble versions of magisk too. Even tried the beta. No luck.
Figured it out
uncannyjish said:
Unlocked my Bootloader recently.
Flashed almost all the best ROMs available. But can't get root access in any of them except Resurrection Remix. The root access on RR works coz it is prerooted and needs a small addonSU to activate it fully. Coutresy of LineageOS/CyanogenMod.
Magisk would give out "Cannot mount /vendor" "Error:1". I tested it on all the latest builds of all the ROMs(AOSP, AOiSP, dotOS, Cardinal etc..)
Tried flashing Magisk versions out there including the treble version of the beta. Also tried the flashing 'boot.img' trick. Still the same thing shows up.
My device : Redmi Note 4 SD
Recovery : Redwolf/TWRP(tried with both of them)
Has anyone been experiencing the same issue??? Has anyone figured out a solution??
Also, RR also seems to give out the same error when flashing Magisk. When I installed Titanium Backup, it said I have 16 cm-SU installed. Can't find a way to uninstall or remove it either.
Click to expand...
Click to collapse
So it was a problem with the treble implementation of the ROM. I was installing treble ROMs using the stock TWRP/Redwolf recovery. These recoveries install the ROM but don't work or make the /vendor partition. This has led many people to believe that there is something wrong with their phone. Anyway, flashing a custom treble recovery did the job. Although not each one of them is perfect, TWRP_3.2.1-7_mido-treble by @NFound is the best one.
Solved every problem faced by me till now. Custom Magisk for Redmi Note 4 is available and works like a charm.
Magisk-v16.3-mido-treble
It seems no one faced this issue before, anyway this would help the new comers like me.
Thanks.
Couldn't get
I am using RR ROM Oreo since 2 weeks and finding ways to root it
But can't find any way to do it
Addonsu is not working
Treble magisk is not working
I need to change my recovery
But the ROM ended up encrypting my internal storage
So should I clean data to format and remove encryption
Or I can directly install a new recovery ?
Format then wipe everything. With a help of a pc or a laptop download a treble supported recovery or the Firefox recovery(search it).Then try again.
Hi, I have an older lenovo tablet. There was windows 10 installed when I got it but it was very slow, so I decided to go with android - Bliss OS ROM. The ROM works perfectly there are no problems with it, but there are no gapps. There is MicroG but I could not get it working. The root is SuperSU. I already googled this but every tutorial/forum suggested to do this through recovery or flashify, or something similiar. But I don't have any recovery as there is classic bios and I could not get Flashify working. I also tried Magisk modules, but those did not work as well. I managed to flash Magisk manually through the official magisk x86 guide(can't post link) and it actually worked. So I started to wonder if there is not a similliar way to manually flash Gapps. I do not know what to do anymore so I turned to this forum.
Thank you very much. Will edit if this gets solved.
Hello, I have problem with my lenovo A6010 every time I install a new ROM whether it is stock or custom, I properly install them but can't load OS but stick to device logo then again thanks to a zip lineage ROM 14.1 I have which I install & it working good
My device is lenovo A6010 after lineage OS it changes into lenovo k31-t3 can't property run apps or install root I want to install new ROM but failed every time I triedI, also install SuperSu from twrp it successfully install there but it sticks on reboot on twrp & back to OS it says root is unsuccessful.., I can't root can't load new ROM struggling to find problem bcz new ROM stick to logo screen forever but lineage OS ROM install successfully & work like a charm
How do I have to install Magisk on the xperia z sgp311 tablet? Once I had managed to install MAgisk just by flashing Magisk.zip but it doesn't work anymore. I tried changing the name of magisk.apk to magisk.zip. It doesn't work either. didn't work either
novatosuper said:
How do I have to install Magisk on the xperia z sgp311 tablet? Once I had managed to install MAgisk just by flashing Magisk.zip but it doesn't work anymore. I tried changing the name of magisk.apk to magisk.zip. It doesn't work either. didn't work either
Click to expand...
Click to collapse
Hi, which TWRP version are you using ? Allowed system partition modification ?
install lineage os microg when I do it it returns twrp with more basic options I have tried flashing the latest twrp with lineage os microg but it doesn't boot the system and makes me flash lineage os microg again when I do it it modifies more basic twrp I don't know why that happens
novatosuper said:
How do I have to install Magisk on the xperia z sgp311 tablet?
Click to expand...
Click to collapse
Edit: what I wrote below is wrong. You're likely running into a Magisk 24.3 bug
-------------------------
This probably doesn't answer your question - but installing Magisk permanently may not be possible. My unscientific opinion (based on my recent experiences) is you may need to install everything in one shot - i.e. no reboot. I recently managed in install Lineage 15.1 from stock using twrp by:
rebooting into fastmode
installing twrp
rebooting into recovery (the one shot I had - if I rebooted at this stage, twrp would be gone! So avoid rebooting from here on out. )
Install lineage zip, then microg & any other packages you want
Reboot into lineage - twrp no longer available
I couldn't get twrp to stay installed even when I tried to install it to system, I figured that's because pollux_windy doesn't have a recovery partition. Also - I'm going off memory, so I may have gotten things wrong. However, it took me about 3 attempts to get things right (at times lineage wouldn't boot, IIRC, I may have forgotten to wipe the cache). I was following the steps in the wiki and used the following versions, accoding to my downloads folder:
twrp v3.6.1_9-0-pollux_windy.img
open_gapps-arm-8.1-nano20220215.zip
lineage-15.1-202000220-nightly-pollux_windy-signed.zip
sangnoir said:
Edit: what I wrote below is wrong. You're likely running into a Magisk 24.3 bug
-------------------------
Click to expand...
Click to collapse
Fixed in recently released v25.0.
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
To check:
TWRP/O.F
wipe/format data type yes
reboot Twrp/O.F
Flash latest firmware (if necessary).
Flash the rom as instructed by the OP.
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
Use TWRP by REIGNZ based on A12 system_ext. You can find it my POCO F1 Ultimate Collection & Guides along with Guides for clean installation.
P.S: Near the link of twrp by reign you will also find a link for the current bugs/issues and workaround for them.