here is a link !
https://www.androidfilehost.com/?fid=24269982086992417
who tested this rom , please leave a review
dowloading...
Edit: Boots correctly, but when the Welcome screen appears it reboot... How do I log that?
Just be careful when it comes to bootloaders etc
Not working on 802 stuck. Restart automatically when arrive to the first configuration screen.
Uechy said:
dowloading...
Edit: Boots correctly, but when the Welcome screen appears it reboot... How do I log that?
Click to expand...
Click to collapse
How did you install it? I did a clean install with lollipop base but it's stuck on CM logo for 5 minutes...
For the welcome screen, what gapps did you try? I read that on G4 and G3 OpenGApps had problems...
ferap said:
Not working on 802 stuck. Restart automatically when arrive to the first configuration screen.
Click to expand...
Click to collapse
i've same problem. :c
Callintz96 said:
How did you install it? I did a clean install with lollipop base but it's stuck on CM logo for 5 minutes...
For the welcome screen, what gapps did you try? I read that on G4 and G3 OpenGApps had problems...
Click to expand...
Click to collapse
I first try with DeltaDroidGapps. I see the stuck on the config scrren and i reinstall (always with all wipes) without any gapps. I search on dev/log to see if there is any log but nothing...
I have the lollipop Hybrid bootstacks and I was on exodus ROM
So it's better to wait a stable Build
Good to see the progress though, even if the majority of it doesn't work
---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------
Uechy said:
I first try with DeltaDroidGapps. I see the stuck on the config scrren and i reinstall (always with all wipes) without any gapps. I search on dev/log to see if there is any log but nothing...
I have the lollipop Hybrid bootstacks and I was on exodus ROM
Click to expand...
Click to collapse
I don't think it has to do with the bootloader then, cause then it would keep boot looping and never reach the configuration screen
Will work on HTC One M9 pw?
JuanKca said:
Will work on HTC One M9 pw?
Click to expand...
Click to collapse
Are you lost?
Finally good news! @JuanKca do not try this one on your M9!
Someone posted a fixed gapps package for 6.0 on the AICP Google+ page choose arm nano or pico depending on what apps you want.
It's not working - I got a reboot after welcome screen. With and without GApps. So it's probably bad build or it's not ready yet.
This is only for D802? I have a D801 (T-Mobile).
I'm gonna flash this on my vs980 wonder how well that'll go
zmankiller said:
I'm gonna flash this on my vs980 wonder how well that'll go
Click to expand...
Click to collapse
Please don't.
any one knows what bootstacks or bootloader should we flash before flashing this rom?
errikosd said:
Please don't.
Click to expand...
Click to collapse
Ha I didn't work but I edited the updater script and then I had the same problems the other people were having
Related
http://download.cyanogenmod.org/?device=togari_gpe
Thank you! I've been looking for this. My Z Ultra GPE arrives in the mail today I'll give it a try. In the end though, I think I'll be sticking with pac-man. We'll see.
PR0XIDIAN said:
Thank you! I've been looking for this. My Z Ultra GPE arrives in the mail today I'll give it a try. In the end though, I think I'll be sticking with pac-man. We'll see.
Click to expand...
Click to collapse
How are you liking it so far compared to Pac-man?
any screenshots mate?
madsponge26 said:
any screenshots mate?
Click to expand...
Click to collapse
It's CM11, so it looks pretty much like the GPe ROM you're running now.
LordManhattan said:
It's CM11, so it looks pretty much like the GPe ROM you're running now.
Click to expand...
Click to collapse
so how's the nightly mate?
madsponge26 said:
so how's the nightly mate?
Click to expand...
Click to collapse
I have the regular Ultra and running the GPe ROM, so I can't really give you an answer.
Sent from my C6806_GPe using Tapatalk
Is anyone running the CM11 nightlies on an actual GPE device?
If so, what works and what doesn't?
Crickets................
unlocked bootloader. flash boot.img still in bootlogo in latest nightly.
madsponge26 said:
unlocked bootloader. flash boot.img still in bootlogo in latest nightly.
Click to expand...
Click to collapse
You should probably PM Kali or someone else on the FXP team.
No matter what, I cannot get this CM11 to flash on my GPE...
Nor, have I seen/read anyone that has been able to... Can someone prove me wrong?
Everything is working here.
Please be more specific as to what did you do to get this running on your device.
And make sure you don't flash togari builds, as that won't work.
cdesai said:
Everything is working here.
Please be more specific as to what did you do to get this running on your device.
And make sure you don't flash togari builds, as that won't work.
Click to expand...
Click to collapse
Well, basically I'm getting status 7 aborts in CWM when flashing this rom.
CCJ22 said:
Well, basically I'm getting status 7 aborts in CWM when flashing this rom.
Click to expand...
Click to collapse
can you try from TWRP?
blueether said:
can you try from TWRP?
Click to expand...
Click to collapse
I'll try that next....
during my status 7 it states your phone is a GPE c6806 device, you're flashing for honami. Abort.... I read someone had this same issue some days ago, I'll find that thread and link it here for future people like me
---------- Post added at 01:02 AM ---------- Previous post was at 12:57 AM ----------
Post 21 is the EXACT problem I'm facing right now.
http://forum.xda-developers.com/showthread.php?t=2643616
I get stuck on Google logo (again I have GPE device, non GPE devices would see Sony logo)
And When I get into CWM I have that exact problem as post 21 in above thread.
CCJ22 said:
I'll try that next....
during my status 7 it states your phone is a GPE c6806 device, you're flashing for honami. Abort.... I read someone had this same issue some days ago, I'll find that thread and link it here for future people like me
Click to expand...
Click to collapse
odd, I thought the error was the other way around?
anyways I'm building carbon for the GPe if you want to be a guinea pig
I should say this:
I have no idea how I got CWM & TWRP working on the device to begin with...
But somehow it's working with the vol up for CWM vol down for TWRP
Now, with quickimg I have removed the boot.img from CM11 (after unzipping it) and placed it in the correct folder for quickimg.
I flashed the boot.img while in fastboot on the phone, via quickimg program.
Seems to have worked as the response is:
Flashing, please wait...
sending 'boot' (11654 KB)...
OKAY [ 0.484s]
writing 'boot'...
OKAY [ 0.767s]
finished. total time: 1.251s
Done. Please check log for errors.
And finally, I wipe dalvik, cache, etc...
And boom, it's working now.
I have no idea what the heck was wrong earlier.
IT's frustrating cause I am the type that likes to know what I did wrong.
---------- Post added at 01:21 AM ---------- Previous post was at 01:20 AM ----------
blueether said:
odd, I thought the error was the other way around?
anyways I'm building carbon for the GPe if you want to be a guinea pig
Click to expand...
Click to collapse
Yes, I'd have no problem beta testing for carbon
---------- Post added at 01:31 AM ---------- Previous post was at 01:21 AM ----------
well now that I have CM11 on, I can tell ya that com.android.phone has stopped working message will not go away. After I click on it pops back up after 3 seconds.
Driving me crazy.
CCJ22 said:
I should say this:
I have no idea how I got CWM & TWRP working on the device to begin with...
But somehow it's working with the vol up for CWM vol down for TWRP
...
well now that I have CM11 on, I can tell ya that com.android.phone has stopped working message will not go away. After I click on it pops back up after 3 seconds.
Driving me crazy.
Click to expand...
Click to collapse
So that you have it installed, although not working it should be simple to try liquid
Did you wipe data and both caches?
It might be a few hours before carbon is built and uploaded, and I have to get to bed early tonight as I have to get up for work at 3am
blueether said:
odd, I thought the error was the other way around?
anyways I'm building carbon for the GPe if you want to be a guinea pig
Click to expand...
Click to collapse
blueether said:
So that you have it installed, although not working it should be simple to try liquid
Did you wipe data and both caches?
It might be a few hours before carbon is built and uploaded, and I have to get to bed early tonight as I have to get up for work at 3am
Click to expand...
Click to collapse
I figured out the problem with the com.process... I cleared cache and data on the dialer app, restarted phone and all is well.
SO far this rom is smooth.
The dpi seems greater then then stock GPE rom. Everything on the screen seems smaller yet I can see more on the screen then before.
No rush on carbon. Whenever you have it up, I'll give it a whirl for ya.
A Video is worth a thousand words.
https://www.youtube.com/watch?v=2qPJd_E71Lg
More info: UntouchedAOSP (XDA Nexus 5)
http://forum.xda-developers.com/google-nexus-5/development/rom-untouchedaosp-aug-17-2015-t3182377
Clean AOSP ROM for D800 and D802. Enjoy !
DOWNLOAD
PS: Try to skip all the registration and stuff from Setup Wizard until you get to home screen, then go to app settings and enable all the permissions of Google Play Services and then configure your account like normal in any google app.
tchapa said:
my motherboard contains d800 and when I actually installed a firmware for d800 model and I made * # 06 # it gives me a serial number 358635056435200 after I did a search for this issue I found it for the D802 model! !!!
---------- Post added at 09:02 PM ---------- Previous post was at 08:59 PM ----------
[help]my motherboard contains d800 and when I actually installed a firmware for d800 model and I made * # 06 # it gives me a serial number 358635056435200 after I did a search for this issue I found it for the D802 model! !!!
I have a problem for the sim card which is totally not detectable for the D802 firmware and detectable for moments in firware d800
Click to expand...
Click to collapse
Did you try flash another modem?
Rangell11 said:
Did you try flash another modem?
Click to expand...
Click to collapse
haow!?!?!?
tchapa said:
haow!?!?!?
Click to expand...
Click to collapse
http://www.gregtwallace.com/lgg2-projects/modem/
d80030f (LP)
you said d800. flash it in twrp.
raptorddd said:
http://www.gregtwallace.com/lgg2-projects/modem/
d80030f (LP)
you said d800. flash it in twrp.
Click to expand...
Click to collapse
show me step by step please i don't no how exactly
tchapa said:
show me step by step please i don't no how exactly
Click to expand...
Click to collapse
download.
go into recovery twrp.
select install
and look for the file selected and flash
reboot system .
done
when I use AUTOREC after installing locks in black screen so I must repeat the installation of kitkat I hope that there is another solution except AUTOREC
AOSP ROM for D800 and D802 is ready.
I know this is untouched but can i ask how to add theme support to this Rom? İnstalling themeengine.apk is enough?
yken said:
I know this is untouched but can i ask how to add theme support to this Rom? İnstalling themeengine.apk is enough?
Click to expand...
Click to collapse
ThemeEngine needs framework changes. So, no, it's not possible.
Anyone can tell more about this ROM? This type of ROM is what I'm looking for. No modifications, no CM stuff in settings and overall across OS, just clean Android like stock Google ROM.
AssassinGEO said:
Anyone can tell more about this ROM? This type of ROM is what I'm looking for. No modifications, no CM stuff in settings and overall across OS, just clean Android like stock Google ROM.
Click to expand...
Click to collapse
A Video is worth a thousand words.
https://www.youtube.com/watch?v=2qPJd_E71Lg
More info: UntouchedAOSP (XDA Nexus 5)
http://forum.xda-developers.com/google-nexus-5/development/rom-untouchedaosp-aug-17-2015-t3182377
Rangell11 said:
A Video is worth a thousand words.
https://www.youtube.com/watch?v=2qPJd_E71Lg
More info: UntouchedAOSP (XDA Nexus 5)
http://forum.xda-developers.com/google-nexus-5/development/rom-untouchedaosp-aug-17-2015-t3182377
Click to expand...
Click to collapse
Ok it's kinda promising. But there is a "broken" kernel. Is there any way to make it look like stock android kernel? I know it's stupid but maybe there are builds or kernels that are based on stock Google one or something. And wanna know if there are any bugs.
Sorry for asking too much, I would test but I'm tired of doing that right now and I need my device for my daily basis, so I have no time for testing...
Oh, and yeah, is that "baseband unknown" thing normal?
Looks amazing but I cant install any gapps, so it is useless...
AssassinGEO said:
Ok it's kinda promising. But there is a "broken" kernel. Is there any way to make it look like stock android kernel? I know it's stupid but maybe there are builds or kernels that are based on stock Google one or something. And wanna know if there are any bugs.
Sorry for asking too much, I would test but I'm tired of doing that right now and I need my device for my daily basis, so I have no time for testing...
Oh, and yeah, is that "baseband unknown" thing normal?
Click to expand...
Click to collapse
Use lambda pure kernel
Google Play Services crash every 20 seconds, and some app is old. BTW the ROM looks awesome.
there is no root
work good in d800 with lambda kernel for root i flash supersu from twrp .now it is time to test battery life thank you
Ivanleta said:
Looks amazing but I cant install any gapps, so it is useless...
Click to expand...
Click to collapse
xpissio said:
Google Play Services crash every 20 seconds, and some app is old. BTW the ROM looks awesome.
Click to expand...
Click to collapse
Give it permission manually and it will gone. (Apps-pick the google services app -permission)
paul89rulez said:
there is no root
Click to expand...
Click to collapse
flash this https://www.androidfilehost.com/?fid=95916177934531508works like a charm
First of all i've searched everywhere in the last 2 days but found nothing, i have a Xiaomi Redmi Note 3 Pro and i've installed the cm-13.0-20161117-NIGHTLY-kenzo(latest) everything is working fine, flashed the Xposed framework and installed the apk and again everything is fine but when i decide to install any module no and i reboot to activate it i just get stuck at the Android robot face animation.. can i get somehelp somewhere?
What robot face??...do you mean the boot logo..or the something else?
hitesh1792 said:
What robot face??...do you mean the boot logo..or the something else?
Click to expand...
Click to collapse
Yep i mean the bootlogo animation
Paura7 said:
Yep i mean the bootlogo animation
Click to expand...
Click to collapse
Go to twrp recovery and clean install the ROM
---------- Post added at 08:18 PM ---------- Previous post was at 08:16 PM ----------
You might have installeded an xposed module which is either not compatible with your device or the os version hence you are experiencing bootloop...
hitesh1792 said:
Go to twrp recovery and clean install the ROM
Click to expand...
Click to collapse
Tried several times but i just can't get xposed to work as it should, everytime when i install whenever module and reboot it just get to that point.. i just wanted to fix the issue
Paura7 said:
Tried several times but i just can't get xposed to work as it should, everytime when i install whenever module and reboot it just get to that point.. i just wanted to fix the issue
Click to expand...
Click to collapse
which xposed framework are u flashing?
hitesh1792 said:
which closed framework are u flashing?
Click to expand...
Click to collapse
I've installed the latest .apk (XposedInstaller_3.1.1.apk) and ofcourse the latest framework (xposed-v86-sdk23-arm64.zip)
Also i've used CM13 some months ago and Xposed worked like a charm.. i don't know why this time it's giving so much problems
Paura7 said:
I've installed the latest .apk (XposedInstaller_3.1.1.apk) and ofcourse the latest framework (xposed-v86-sdk23-arm64.zip)
Also i've used CM13 some months ago and Xposed worked like a charm.. i don't know why this time it's giving so much problems
Click to expand...
Click to collapse
Try may b a diff rom...like RR..
hitesh1792 said:
Try may b a diff rom...like RR..
Click to expand...
Click to collapse
I'm not interested so much in changing room because i've always been a fan of CM..
Same problem was with me, did a clean install without xposed and everything's good. (I'm on cm14 atm)
Paura7 said:
I'm not interested so much in changing room because i've always been a fan of CM..
Click to expand...
Click to collapse
Try using some earlier nightly..
balazs312 said:
Same problem was with me, did a clean install without xposed and everything's good. (I'm on cm14 atm)
Click to expand...
Click to collapse
As far as i know there is no official Xposed for cm14 but if anyone has my problem i found this that should be the fix
http://forum.xda-developers.com/xposed/announcement-cm-bootloop-issues-xposed-t3501945
Seems you need to flash a nightly that was pushed before november and everything should be good to go, ill try it later and let u know
Paura7 said:
As far as i know there is no official Xposed for cm14 but if anyone has my problem i found this that should be the fix
http://forum.xda-developers.com/xposed/announcement-cm-bootloop-issues-xposed-t3501945
Seems you need to flash a nightly that was pushed before november and everything should be good to go, ill try it later and let u know
Click to expand...
Click to collapse
Yes, it is being fixed atm, we also found a temporary solution http://forum.xda-developers.com/redmi-note-3/how-to/fix-fix-bootloop-issues-xposed-roms-t3503184
Thanks to modpunk, Serenitys, and other developers, i builded cm14.1 for kor alpha and it works fine.
Great! Can you share it?
wow, it's stable for daily use?
I was looking for your thread since yesterday. any bugs? excited to try this out
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
josepmaria said:
Great! Can you share it?
Click to expand...
Click to collapse
you can find it on his androidfilehost profile, not sure if i'm allowed to share the link.
Did you face any bugs and does it support fingerprint unlock?
How did you do it?
Edit:
I'm going to try the latest build from androfilehost.
I hope the mic (in calling) is working and other basic functions. I have a G850k by the way.
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
click.here said:
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
Click to expand...
Click to collapse
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
kevkev0320 said:
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
Click to expand...
Click to collapse
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
click.here said:
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
Click to expand...
Click to collapse
It was an unofficial build, but my system is now running,
many thanks <3
I can confirm that CM14.1 works with my Korean variant G850k but the mic problem still persist from previous CM13 . I hope this could be fix and more power. You should create a new thread when everything seems to be functional so that we could also inform others and have they're feedbacks
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
do u understand dutch? can i send u a PM?
kevkev0320 said:
do u understand dutch? can i send u a PM?
Click to expand...
Click to collapse
yes I do, go ahead.
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
click.here said:
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
Click to expand...
Click to collapse
i tried, it won't go away. wasn't able to test anything tbh.
ArisRafaelli said:
i tried, it won't go away. wasn't able to test anything tbh.
Click to expand...
Click to collapse
You have to close it quickly and press next until you reach the home screen. After that just enable developer settings and it will go away.
@hdh980910 we wait for your answers.
Thanks i will go to flash cm14.1 on my alpha
Thanks i will go to flash cm14.1 on my alpha
many people in develoid cafe say kt alpha has connect out phenomenon. can you fix it?
DOWNLOAD
NOTICE:
The 8/8/2019 version is currently the latest!
RR stopped updating the framework for Oreo in December 2018. There's no reason to have weekly builds anymore, though I may still create new builds when security updates come through.
I'll create a thread for Pie once the dust settles, so please be patient. If you are itching for Pie right now please support x86cpu and his LOS16 builds!
Actually important stuff:
Update TWRP, older versions may cause problems.
If you're coming from stock, make a backup of your EFS partition. If that gets wiped, then you may have issues connecting to LTE on some devices.
Verizon users (regardless of phone model): You need to make an outgoing call after booting to be registered correctly on their network. Calling your voicemail is an easy way to do this.
H918 users: Versions up to, but not including, 10p are ARB0. 10p+ is ARB1.
YewMinou: This is an app to make a detailed logcat file. If you run into issues, make a log and attach it to your post.
Please do a clean install and wipe cache and dalvik cache after flashing the ROM (TWRP should give you a button to do so once flashing is complete).
Current Issues:
VoLTE and WIFI Calling do not work.
Second screen functionality (for now...).
Standing on the shoulders of giants
This ROM would not be possible without people that have selflessly donated immense amounts of their free time and effort. I'd like to thank:
x86cpu, Rashed97, emdroidle(ehem), Omar-Avelar(oxavelar): For making current, aosp-based ROMs a reality for the v20.
runningnak3d: For making it possible to even flash those ROMs on many variants.
Phoenix591: For maintaining and updating TWRP for the v20.
Zacharee1: For the work being put in to the second screen development.
I'd also like to thank everyone that works on LineageOS and Resurrection Remix!
Sources:
ResurrectionRemix
kernel_lge_msm8996
msm8996-common
v20-common
h910
h918
h990
ls997
us996
vs995
YewMinou
Since people were basically making threads for this already, I may as well just come out with it.
I only have the US996 model, so all of the builds for the other models are untested. I'll do what I can to make sure those work correctly, but I can't make any promises.
YewMinou is pretty spartan at the moment. When I get some time, I'll add the option to change the save location and make things look a little prettier.
Good job @Blaises I've been running your builds for awhile, and so far they're solid.
Edit: First....
Sent from mTalk
Tested on h990ds but after showing rr logo crash kernel and was not boot.
Thanks for Blaises
Does its work for H990DS?
willy solihin said:
Does its work for H990DS?
Click to expand...
Click to collapse
doesn't work, crash kernel and was not boot.
dilaboni said:
doesn't work, crash kernel and was not boot.
Click to expand...
Click to collapse
I replaced boot.img from lineage h990 in rr zip file and re flashed again and worked. Rom has been boot. But I have not signal like lineage. Other things worked fine.can anyone help me for fix signal on h990ds
I've just uploaded new build for the H990, here's a direct link.
Let me know if that has the same issue.
Blaises said:
I've just uploaded new build for the H990, here's a direct link.
Let me know if that has the same issue.
Click to expand...
Click to collapse
Reed above post and help me for signal
Blaises said:
I've just uploaded new build for the H990, here's a direct link.
Let me know if that has the same issue.
Click to expand...
Click to collapse
I've just got the first build for the H990 (single SIM) to boot. At first boot attempt, there was a kernel crash as the H990DS has been reported to have. What fixed the booting issue was flashing Gamma Kernel. All good now. Thanks so much for building RR! Such a great ROM!
Update: also, cell, data, wifi and bluetooth all work
Blaises said:
I've just uploaded new build for the H990, here's a direct link.
Let me know if that has the same issue.
Click to expand...
Click to collapse
On my way,downloaded and fla****,thanks
---------- Post added at 03:19 AM ---------- Previous post was at 03:12 AM ----------
jl10101 said:
I've just got the first build for the H990 (single SIM) to boot. At first boot attempt, there was a kernel crash as the H990DS has been reported to have. What fixed the booting issue was flashing Gamma Kernel. All good now. Thanks so much for building RR! Such a great ROM!
Update: also, cell, data, wifi and bluetooth all work
Click to expand...
Click to collapse
What have do you version Gamma Kernel?
Any H910 users confirm if NFC service eating battery problem is gone? I've been through hell for Lineage 14 and 15 but couldn't get my head around the terrible battery drain due to greyed out nfc
When the installation is complete i'm rebooting system from my recovery screen and it's rebooting to recovery .why?
dilaboni said:
When the installation is complete i'm rebooting system from my recovery screen and it's rebooting to recovery .why?
Click to expand...
Click to collapse
Happened to me too on vs995. Never happened again after 1st boot so idk.
Have any one fix the LCD screen burn or ghost img
tswb said:
Have any one fix the LCD screen burn or ghost img
Click to expand...
Click to collapse
Did you try this
Thanks h990ds worked with new link.
I have some questions
How i can install lg v30 camera in RR rom ? I installed it via recovery but when phone booted get error .
When i installed boredsign get error that not compatible with your device
uppon2 said:
Did you try this
Click to expand...
Click to collapse
The kernel doesn't support with the kcal
tswb said:
The kernel doesn't support with the kcal
Click to expand...
Click to collapse
You can flash Gamma kernel.
LS997 seems to work, confirmed wifi works at least, but switching the carrier settings to SIM/RIUM causes everything to go haywire. android.phone.com crashes every two seconds or so, and trying to flash the Gamma kernel out of desperation just lead to a bootloop.
Is there a .zip anyone would recommend trying to dirty flash this on top of to preserve carrier settings?