miaoudak said:
I cannot download the file....
Click to expand...
Click to collapse
Billkaza said:
The file is not available anymore..Is it possible you to upload it here?
Click to expand...
Click to collapse
sure, b-cos You need a registration
See the attached file below.
One thing: comments to figures in russian, but all document is understandable by this figs.
Billkaza said:
Thank you mate
I only cant understand which is the missing part of the antenna amplifier?
What is its part number?
Click to expand...
Click to collapse
You mean active antenna phantom powering ?
On some circuit boards active antenna power are not mounted, this is haven't any part numbers., this is cirquit board elements
look HERE and HERE
uncleg said:
sure, b-cos You need a registration
See the attached file below.
One thing: comments to figures in russian, but all document is understandable by this figs.
Click to expand...
Click to collapse
Something info in English?
Marius B said:
Something info in English?
Click to expand...
Click to collapse
If You have a questions regarding this document, ask me, don't hesitate. But figures in this doc, more informative than words
Correct me if I am wrong, but I don't believe this mod improves signal quality, if improves sound quality.
you are right, this has nothing to do with signal.
Anyone any mod fro signal improvement?
Related
I just exchanged my Fuze for a new one due to some mechanical issues with the model I first had. I now have a clean, new Fuze. Is there anything from here that would be helpful for the community that I could extract and upload? I have no idea, which is why I'm asking. Just wanna give back a bit, many of you guys have been very helpful.
Meantime, can someone please tell me where I can find an app that does unit conversions? Weight, volume, distance, etc.? Thank you guys!
tinpanalley said:
Meantime, can someone please tell me where I can find an app that does unit conversions? Weight, volume, distance, etc.? Thank you guys!
Click to expand...
Click to collapse
Hicalc should cover your needs... and more )
http://www.ppclink.com/?ppclink=product&do=view&id=44
>Is there anything needed for the community?
Click to expand...
Click to collapse
proper video drivers please!
topaz New Radio 4.48.25.13 [repeated]
http://www.rayfile.com/files/46d3b59c-92b7-11de-9453-0014221f469f/
http://rapidshare.com/files/271169620/Topaz_Radio_4.48.25.13.rar
Wow! Tks~~~
Thanks, good news!
anybody try it?
dtosun said:
anybody try it?
Click to expand...
Click to collapse
Yes, tested it.
Poor GPS-reception (only 5 sats in googlemaps). Switches from HSDPA back to 3G at places, where I've had HSDPA before...
Back to 4.47.25.01.
I am gonna test it, report back in 20min.
My main reason to test it, is because with some ROM (like Tom_Topaz_2.08_R1.1_Leo_WhiteStone) I have poor GSM reception. Hope this will fix this.
edit: same poor gsm reception, but i will keep it for few days to see how it will consume battery.
Please post your test results in the RADIO thread.
Thanks.
Would be nice if you write from where you took this Radio, right?
http://forum.myppc.it/viewtopic.php?f=25&t=44
udK said:
Would be nice if you write from where you took this Radio, right?
http://forum.myppc.it/viewtopic.php?f=25&t=44
Click to expand...
Click to collapse
Hi udk:
I received this from other forums. Do not know the actual source. Here Say sorry.
Gump
yes yes.. and this is your clone..
I'm an admin, I can see all log.
udK said:
yes yes.. and this is your clone..
I'm an admin, I can see all log.
Click to expand...
Click to collapse
Jealous?
This community lives from sharing.
Now in the sticky, this thread is no longer required.
Closed
Dave
I have a z ultra running the latest update but it seems that I can't screen mirror with any tv that has a screen mirror. The ddevice will recognize theconictions but for some reason im getting dis and kicked out... Any solutions plz
Wow no reply.... No one tried miracast
Here is more info, http://forum.xda-developers.com/showthread.php?t=2484052
rworkin
herogjan said:
Here is more info, http://forum.xda-developers.com/showthread.php?t=2484052
Click to expand...
Click to collapse
Not really any much of help.... The guy dont know how to find it...
Mhussan said:
Not really any much of help.... The guy dont know how to find it...
Click to expand...
Click to collapse
If you've had read the entire topic, which contained the staggering number of 4 posts, you've found your answer.
If you want to learn something you should invest a bit more
herogjan said:
If you've had read the entire topic, which contained the staggering number of 4 posts, you've found your answer.
If you want to learn something you should invest a bit more
Click to expand...
Click to collapse
Dont need to invest ... Nothing new to me that its not working with tvs.... Iwant solutions
good day,found the article how to install Android on Kaiser ,I have 2 and I thought would be a fun one for Windows, one on Android
all was released but Android brake very well and badly shows,a large grain size,divorce,I saw a video with cyanogenmod,it wasn all right displayI can someone help with this issue?
did everything step by step,checked many times the result is the same:crying:
Sorry but your post does not make much sense. Try to use a better translator.
Good luck!
el-figurin said:
Sorry but your post does not make much sense. Try to use a better translator.
Good luck!
Click to expand...
Click to collapse
OK,incorrectly displayed color,large grain size ,what can i do?
all 3 panels in Atool I tried...
neyarik said:
OK,incorrectly displayed color,large grain size ,what can i do?
all 3 panels in Atool I tried...
Click to expand...
Click to collapse
OK
incorrectly displayed color,large grain size ,what can i do?
all 3 panels in Atools I tried...
I ve discovered that the 7floor sound mod has been made to work on an RK3188 MTCD unit by @kumarai.
I ve searched all threads in this forum and it doesnt seem to be known amongst you MTCD guys (or even to have been mentioned), whereas over in the MTCB forums (the mod was developed for MTCB units) quite a few people have done it.
I thought it would be worth mentioning here.
What it does, basically is remove control of the sound processor from the MCU and give it to Android for a very worth while improvement in sound quality and more features.
It does require some soldering and there is a small difference in what has to be done to the software (see first pic) to get it to work on MTCD units. Cant say it will work on Sofia or PX5 units, but theres no reason to think it wouldnt or couldnt be made to work on them.
Here are some links :
@kumarai on youtube :
https://www.youtube.com/watch?v=KyDFyirit9I&feature=youtu.be
@7floor's original thread :
https://forum.xda-developers.com/an.../mtc-sound-controlling-bd37xxx-sound-t3234660
7floor's Xposed repo page (which now mentions MTCD units) :
http://repo.xposed.info/module/com.sevenfloor.mtcsound
Screenshots from 4pda.ru (links from there not allowed ot be posted on xda)
thats very cool,
however does it get rid of the constant hiss sounds, and the noise generated when mcu is processing.
regards
mmmalas said:
thats very cool,
however does it get rid of the constant hiss sounds, and the noise generated when mcu is processing.
regards
Click to expand...
Click to collapse
I ve got an MTCB/C unit and I never had those issues even with the MCU controlling the sound processor, so I dont know, if the sounds are caused by the MCU processing sound then maybe.
Software part?
Hello,
I'm very interested to perform this mod but I'm having couple of questions. The unit is now on my kitchen table and I have all the parts I need.
How does the software part go with MTCD unit, because we cannot install xposed framework?
For me This is the correct route(different from 7floor):
BD37 -26 SDA - R70(100ohm) - SDIN
BD37 - 25 SCL - R71(100ohm) - SCLK
I've read that older models have 1kohm resistance but I have 100ohm which should lower the interference "hiss/fuzz" sound. Sound is pretty good now but only bluetooth A2DP quality suck with iPhone and I'd hope this mod would improve it.
Kheissi said:
Hello,
I'm very interested to perform this mod but I'm having couple of questions. The unit is now on my kitchen table and I have all the parts I need.
How does the software part go with MTCD unit, because we cannot install xposed framework?
For me This is the correct route(different from 7floor):
BD37 -26 SDA - R70(100ohm) - SDIN
BD37 - 25 SCL - R71(100ohm) - SCLK
I've read that older models have 1kohm resistance but I have 100ohm which should lower the interference "hiss/fuzz" sound. Sound is pretty good now but only bluetooth A2DP quality suck with iPhone and I'd hope this mod would improve it.
Click to expand...
Click to collapse
There are 4 different versions of MTCD units, you need to state which one you have
edit : I can see from your other post that you ahve 5.1.1, you CAN install Xposed (but you need to be rooted).
Installed xposed framework
Oh yes, my unit is running 5.1.1 Hal9k android with KSP MCU, RK3188 and 1 GB of RAM.
I managed to install the xposed framework successfully! :victory: Now I'm installing MTC sound app and after I have checked it out I will solder the wires. :fingers-crossed:
Any tips how to get those little Rs out safely, because my tweezers won't get a good hold of those?
I have Dasaita V600 model with PX5 system. I was wondering does anybody know is it possible to do a 7floor mod on this unit?
Kheissi said:
Any tips how to get those little Rs out safely, because my tweezers won't get a good hold of those?
Click to expand...
Click to collapse
Heat.
hrvac100 said:
I have Dasaita V600 model with PX5 system. I was wondering does anybody know is it possible to do a 7floor mod on this unit?
Click to expand...
Click to collapse
Read the thread, it was mentioned just a few posts back.
typos1 said:
Read the thread, it was mentioned just a few posts back.
Click to expand...
Click to collapse
Well I have read and is only mentioned it could work but i was wondering has anybody try to open px5 unit and see are those components the same like in 3188 or similar. Because I would like to try to do that mod but would also like to know has anybody try it already on px5.
hrvac100 said:
Well I have read and is only mentioned it could work but i was wondering has anybody try to open px5 unit and see are those components the same like in 3188 or similar. Because I would like to try to do that mod but would also like to know has anybody try it already on px5.
Click to expand...
Click to collapse
When I say "the thread" I mean the original thread in the MTCB section as thats where all the info is . . .
typos1 said:
When I say "the thread" I mean the original thread in the MTCB section as thats where all the info is . . .
Click to expand...
Click to collapse
OK. Can you please be so kind and direct me on exact thread?
hrvac100 said:
OK. Can you please be so kind and direct me on exact thread?
Click to expand...
Click to collapse
Ah, you havent even bothered to read this thread either ?
If you had youd see that I d put a link to it in the first post.
typos1 said:
Ah, you havent even bothered to read this thread either ?
If you had youd see that I d put a link to it in the first post.
Click to expand...
Click to collapse
I saw that post, but honestly I didn't have time to read all posts. And majority of what I had chance to read was for px3 boards.
hrvac100 said:
I saw that post, but honestly I didn't have time to read all posts. And majority of what I had chance to read was for px3 boards.
Click to expand...
Click to collapse
Well youre supposed to read the thread before asking questions. All the info you need is in both threads.
marchnz said:
Heat.
Click to expand...
Click to collapse
C'mon man.
Anyway I was able to perform the mod successfully, at least it seems that way. But I have not had the change to install the unit in a my car yet so I really don't know if any sound is actually coming out...
My tip for soldering. Add little extra solder to the old components before removing. That way you have little more time to warm up both ends.
Had to install the MTC sound 2.0.5. app to avoid UI error.
Kheissi said:
C'mon man.
Anyway I was able to perform the mod successfully, at least it seems that way. But I have not had the change to install the unit in a my car yet so I really don't know if any sound is actually coming out...
My tip for soldering. Add little extra solder to the old components before removing. That way you have little more time to warm up both ends.
Had to install the MTC sound 2.0.5. app to avoid UI error.
Click to expand...
Click to collapse
That's great. Looks like you found the thread that discussed this very item/question in detail too.
typos1 said:
Well youre supposed to read the thread before asking questions. All the info you need is in both threads.
Click to expand...
Click to collapse
I managed to read all. Thanks
Does anyone have issues with Bluetooth? I tried to find more info from the original thread but didn’t find anything useful.
I have sound from radio and Spotify but Bluetooth calls won’t work. I can’t hear anything from the Bluetooth app and A2DP goes directly to calling screen.
How can I get the A2DP to work so I can stream from my phone?
Edit: No problems after all. Had to toggle gsm via android from the EQ and then calls work just fine. Then A2DP works only when using stock launcher. I find that weird.
Kheissi said:
Does anyone have issues with Bluetooth? I tried to find more info from the original thread but didn’t find anything useful.
I have sound from radio and Spotify but Bluetooth calls won’t work. I can’t hear anything from the Bluetooth app and A2DP goes directly to calling screen.
How can I get the A2DP to work so I can stream from my phone?
Edit: No problems after all. Had to toggle gsm via android from the EQ and then calls work just fine. Then A2DP works only when using stock launcher. I find that weird.
Click to expand...
Click to collapse
Strange, you could try BT app that includes the A2DP function (as opposed to one that has a separate app for it) and see if that makes a difference . . . although youd have to go through all the ROMs to try and find one. What processor have you got ?